Hydraulic Hoses; Air Cleaner - Baroness GM1700 Owner's Operating Manual
Mid-mount rotary mower
Hide thumbs
Also See for GM1700:
- Service manual (192 pages) ,
- Owner's operating manual (87 pages) ,
- Owner's operating manual (43 pages)
Table of Contents
Advertisement
Hydraulic Oil Supply
Important
Do not mix different types of oil.
Important
Use Shell Tellus S2M46 (or equivalent) as
hydraulic oil.
In case of an equivalent, consult
Characteristics of Hydraulic Oil and use
hydraulic oil whose characteristics are
superior to those of the specific hydraulic oil.
Especially regarding kinematic viscosity and
viscosity index, use of hydraulic oil whose
figures are less than those of the specified
hydraulic oil will cause a malfunction in the
hydraulic circuit.
Note:
Characteristics of Hydraulic Oil
Specified Hydraulic Oil
ISO Viscosity Grade
Density
15 °C (59 °F)
API Gravity
Flash Point (Open Cup)
Pour Point
40 °C (104 °F)
Kinematic
Viscosity
100 °C (212 °F)
Viscosity Index
1.
If the oil level is low, open the tank cap and
supply oil.
2
Hydraulic Oil Supply_001
1
Tank cap
2
Oil gauge
2.
Securely close the tank cap.
Inspections
Shell Tellus S2M46
ISO VG46
3
0.873 g/cm
3
(0.0315 lb/in
)
30.6
230 °C (446 °F)
-30 °C (-22 °F)
2
46 mm
/s (46 cSt)
2
7 mm
/s (7 cSt)
109
1
dmhzyz-011
Handling Instructions
3.
Start the engine, raise and lower the mower
decks, and turn the steering wheel left and
right.
Move forward and reverse repeatedly
several times.
4.
Raise the mower decks and maintain that
position on a level surface, and then check
to see if the oil level is at the middle of the
oil gauge. If necessary, supply oil.
5.
Check underneath the machine for oil
leakage.
Hydraulic Hoses
Inspection of Hydraulic Hoses
Warning
When checking the hydraulic circuit for
pinhole leaks or oil leakage from nozzles, do
not use your hands. Use items such as paper
or corrugated cardboard to find leakage
points.
Be extremely careful with high-pressure oil as
it may pierce your skin, resulting in personal
accidents.
If fluid is injected into the skin it must be
surgically removed within a few hours by a
doctor familiar with this form of injury or
gangrene may result.
Check the pipes and hoses to make sure that
there is no oil leakage, circuit damage,
looseness, wear, connector looseness,
weather deterioration and chemical
deterioration.
Make any necessary repairs before operating
the machine.
Air Cleaner
Inspection of Air Cleaner
The air cleaner is a component that removes
dirt from the intake air to prevent wear of the
cylinder liners and piston rings so that the
engine will always operate smoothly.
A contaminated air cleaner element may
cause malfunction of the engine.
1.
Make sure that there is no damage to the
air cleaner.
GM1700
Page 4-5
Advertisement
Chapters
Table of Contents
