Welcome Welcome to the world of Motorola digital wireless communications! We are pleased that you have chosen the Motorola V60s wireless phone. Display Headset Jack Insert headset accessory for handsfree use. Left Soft Key Perform functions identified by left display prompt.
RF energy. When you communicate with your phone, the system handling your call controls the power level at which your phone transmits. Your Motorola phone is designed to comply with local regulatory requirements in your country concerning exposure of human beings to RF energy.
Motorola-supplied or approved clip, holder, holster, case, or body harness for this phone, if available. Use of accessories not approved by Motorola may exceed RF energy exposure guidelines. If you do not use one of the...
Aircraft When instructed to do so, turn off your phone when on board an aircraft. Any use of a phone must be in accordance with applicable regulations per airline crew instructions. Medical Devices Pacemakers Pacemaker manufacturers recommend that a minimum separation of 6 inches (15 centimeters) be maintained between a handheld wireless phone and a pacemaker.
• Pull off the road and park before making or answering a call if driving conditions so require. Responsible driving best practices may be found in the “Wireless Phone Safety Tips” at the end of this manual and at the Motorola website: www.Motorola.com/callsmart. Operational Warnings...
Page 11
(short circuit) and become quite hot. Exercise care in handling any charged battery, particularly when placing it inside a pocket, purse, or other container with metal objects. Use only Motorola original batteries and chargers. Your battery or phone may contain symbols, defined as follows:...
Parents should monitor their children's use of video game or other features that incorporate flashing lights on the phones. All persons should discontinue use and consult a doctor if any of the following symptoms occur: convulsion, eye or muscle twitching, loss of awareness, involuntary movements, or disorientation.
Note: A More Here reference guide for your phone is also available that describes your phone’s features in more detail. To obtain the More Here reference guide for your phone or another copy of this user’s guide, see the Motorola Web site at: http://motorola.com/consumer/manuals (U.S.A.) http://motorola.ca/consumer (Canada)
Motorola Original Installing the Battery You must install and charge the battery to use your phone. Your phone is designed to use only Motorola Original batteries and accessories. We recommend that you store batteries in their protective cases when not in use.
Action 3 Insert the battery, printed arrow first, under the tab at the top of the battery compartment and push down. 4 Insert the ridge at the bottom of the battery door into the base of the phone, then push the door down and snap it into place.
Caution: To prevent injuries or burns, do not allow metal objects to contact or short-circuit the battery terminals. To maximize your battery’s performance: • Always use Motorola Original™ batteries and battery chargers. The phone warranty does not cover damage caused from using non-Motorola batteries and/or battery chargers.
Page 17
• Maintain the battery at or near room temperature when charging. • Do not expose batteries to temperatures below -10°C (14°F) or above 45°C (113°F). Always take your phone with you when you leave your vehicle. • When you do not intend to use a battery for a while, store it uncharged in a cool, dark, dry place, such as a refrigerator.
Turning On Your Phone Action 1 Open your phone. 2 Press and hold 3 seconds 3 If necessary, enter your 4-digit unlock code and press OK ( The unlock code is originally set to 1234. Your service provider may change this number before you receive your phone.
Making a Call Press 1 the keypad keys Ending a Call Press or close the flip dial the phone number Tip: If you make a mistake, press DELETE ( ) to delete the last digit, or press and hold DELETE ( ) to delete all digits.
Answering a Call When you receive a call, your phone rings and/or vibrates and displays an incoming call message. Press or ANSWER ( Tip: Press speakerphone. Note: If your phone is locked, you must unlock it to answer the call. Viewing Your Phone Number Press ) or open the flip...
Highlight Features Receiving a Text Message When you receive a text message, your phone displays (message waiting) indicator and a New Inbox Message notification, and gives an alert. Press READ If reminders are turned on, your phone sends a reminder at regular intervals until you close the new message notification, read the message, or turn off your phone.
You can store these embedded object files on your phone, and use them as screen saver images and alert tones. Storing a Picture or Animation File Press 4 SELECT ( 6 SELECT ( 7 STORE ( 9 SELECT ( Storing a Sound File You can store a sound file, and set it as a ring tone and/or event alert.
Page 23
Press 4 SELECT ( 6 SELECT ( 7 STORE ( 9 SELECT ( 11 SELECT ( open the Inbox Menu scroll to Store display a list of items you can store scroll to File Attachment display the file name view storage options scroll to Store Only or Set As Ring Tone select the option...
Using the Micro-Browser Starting a Micro-Browser Session Find the Feature Press 2 SELECT ( Shortcut: If you open a text message with a Web address (URL) in it, you can press micro-browser and go to the URL. If you cannot establish a network connection with the micro-browser, contact your service provider.
Interacting With Web Pages Press SELECT keypad keys, followed by BACK ) or Downloading Objects from a Web Page You can download a photo, picture, animation, or sounds (such as a ring tone) from a Web page. You can store these media objects on your phone and use them as wallpaper images, screen saver images, and event alerts.
Storing a Picture or Animation File Press 2 SELECT ( 4 SELECT ( 6 SELECT ( 7 STORE ( 9 SELECT ( highlight the picture or animation open the Inbox Menu scroll to Store display a list of items you can store scroll to File Attachment display the file name...
Storing a Sound File You can store a sound file (such as a ring tone) and set it as an event alert. Press 4 SELECT ( 6 SELECT ( 7 STORE ( 9 SELECT ( 10 S 11 SELECT ( highlight the sound file indicator (p) indicator in the message...
Using the Datebook The datebook lets you schedule and organize events such as appointments and meetings. You can set the datebook to send a reminder alarm for specific events. Note: You must set the time and date on your phone to use the datebook.
Day View Select a day and press VIEW ( Untimed Event • Joe's B-day Down Scroll BACK Return to previous screen. Event View Select an event and press VIEW ( Reminder Alarm Down Scroll Return to previous screen. ) to see the day’s events. THU 19-NOV 9:00 Marie,...
Adding a Datebook Event Tip: You can create a 1-time event to act as an alarm clock! A title is required for a datebook event. All other information is optional. Note: You must create an event to use the reminder alarm. Find the Feature Press 1 CHANGE (...
Page 31
Enter the Title Press 1 CHANGE ( 2 keypad keys BROWSE b SELECT ( 3 OK ( Set the Time Press 1 CHANGE ( 2 keypad keys 4 keypad keys 7 DONE ( select Title enter a title for the event display a predefined list of titles such as Meeting or Dinner...
Page 32
Set the Duration Press 1 CHANGE ( 3 SELECT ( Set the Date Press 1 CHANGE ( 2 keypad keys 4 keypad keys 6 keypad keys 7 DONE ( select Duration scroll to the event’s duration select the duration select Date enter the event month or day (depending on the date format)
Page 33
Set the Repeat Interval To specify that an event repeats or happens on a recurring basis: Press 1 CHANGE ( 3 SELECT ( select Repeat scroll to a repeat setting You can set the event to repeat at the following intervals: None , Daily , Weekly , Monthly on day (for example,...
Page 34
Set the Alarm Tip: You can create a 1-time event to act as an alarm clock! You can set an alarm to alert you at a specified time interval before the event occurs: Press 1 CHANGE ( 3 SELECT ( 4 DONE ( select the indicator...
If you select a Custom alarm setting: Press 4 DONE ( Changing Event Information Find the Feature Press 2 VIEW ( 4 VIEW ( 5 EDIT ( 7 CHANGE ( 8 keypad keys 9 DONE ( scroll to a numerical value from 0 to 99 move to the time interval field scroll to the desired time...
Copying an Event Find the Feature Press 2 VIEW ( 6 SELECT ( 7 YES ( 8 keypad keys 10 DONE ( 12 DONE ( > Datebook scroll to the day display the day view scroll to the event open the Datebook Menu scroll to Copy copy the event confirm the copy...
Deleting an Event Find the Feature Press 2 VIEW ( 6 SELECT ( 7 YES ( Viewing and Dismissing an Event Reminder When you set an alarm for an event, the phone displays or sounds an event reminder. To view or dismiss an event reminder: Press VIEW...
Changing the Datebook Setup You can change the datebook’s daily start time, and set the length of time that it stores events. Change the Start Time To change the start time for each day displayed in the Week View Find the Feature Press 1 keypad keys 4 DONE (...
Matching front and back cover sets are available in a variety of colors and designs. Your phone is designed to be used only with Motorola Original accessories. See your Motorola retailer for these convertible covers. Removing a Flip Cover...
Attaching a Flip Cover Action 1 Close your flip phone. 2 Line up the ridges on each side of the cover so they align with the slots on the phone. 3 Slide the cover onto the phone until it snaps into place.
Learning to Use Your Phone See page 1 for a basic phone diagram. Using the Display Roam ( In Use Digital/ Analog Signal Signal Strength PH.BOOK Ring Style The idle display is the standard display when you are not on a call or using the menu. Labels at the bottom corners of the display show the current soft key functions.
Page 42
Ring Style Indicator Shows the ring style setting. = loud ring = vibrate = silent Signal Strength Indicator Vertical bars show the strength of the network connection. You cannot make or receive calls when the In Use Indicator Shows that a phone call is in progress.
Active Line Indicator Shows the active phone line. Menu Indicator Indicates that you can press enter the main menu or open a feature sub-menu. Using Menus From the idle display, press to display the main menu. Selecting a Menu Feature To select a menu feature, starting from the idle display: >...
Selecting a Feature Some features require you to select an item from a list. Press BACK to go back to the previous screen. Press open the sub-menu. • Press you want. • In a numbered list, press a number key to highlight the item.
Entering Text Some features require you to enter information. Press scroll down to additional items. CANCEL Press CANCEL ( ) to exit without making changes. DONE ) displays when you enter or edit information. • Enter numbers or text with the keypad. •...
Page 46
The message center lets you compose and send text messages. Flashing cursor indicates insertion point. Press CANCEL ( without making changes. When you enter text using the standard tap method, the flashing cursor changes to a block cursor, and the soft key functions change.
Choosing a Text Entry Method Multiple text entry methods make it easy for you to enter names, numbers, and messages on your phone. Press from any text entry screen. The symbol for the active method displays at the top of the text entry screen: iTAP Let the phone predict each word as you é...
Page 48
Press 2 Number keys 3 OK ( General Text Entry Rules Press a number key repeatedly to cycle through its characters (see “Character Chart” on page 49). Press a number key as many times as necessary to enter the desired character at flashing cursor location.
Page 49
• The first character of every sentence is capitalized. Press down to change the character to lowercase while it is highlighted by the block cursor. Character Chart Use this chart as a guide for entering spaces, letters, numbers, and symbols with the tap method. space .
Using Symbol Method Your phone provides an alternate way to enter symbol characters in a message. Press screen and select the Symbol menu option. Press 1 a number key 1 time press the number key multiple times 3 SELECT ( display its symbol options at the bottom of the display See the “Symbol Chart”...
Entering Words Press 1 A number key 1 time 2 Number keys (1 per letter) 4 SELECT ( enter the first letter of the word The letters associated with the key are shown at the bottom of the display. enter the rest of the word Alternative words and letter combinations are shown at the bottom of the display.
Page 53
For example, to spell the word “art,” press The display shows: Flashing cursor indicates insertion point. DELETE Press DELETE ( to clear the last letter. Entering Novel Words You may enter a word that the iTAP software does not recognize. If the word you want is not displayed: Action 1 Press DELETE ( letters until you see a letter combination that...
Entering Punctuation Action Press characters as shown in the “Character Chart” on page 49. Using Capitalization The first word of a sentence is automatically capitalized, with following words in lowercase. Action Press letters to initial character capitalized. Press letters to uppercase characters. Press or letters to lowercase characters.
Entering Numbers Press 1 the first digit and then highlight it 2 number keys 3 SELECT ( Deleting Letters and Words Place the cursor to the right of the text you want to delete, and then: Press DELETE Press and hold DELETE put the iTAP software in number entry method...
Using the Status Light The status light shows when you have an incoming call or message, or when your phone is roaming (using a non-home network). Indication Alternating red/green Flashing green Flashing yellow Flashing red The status light initially is turned off to extend battery life. To turn it on or off, go to >...
Using the Smart Button The smart button provides another way to perform many basic phone functions. It Smart Button anticipates the next action you are likely to perform. For example, when you highlight a menu item, you can press the smart button to select it. You can use the smart button to make and end calls, toggle features on and off, and open your phonebook.
Using the External Display When the flip is closed, the external display shows the time and date. It also displays messages to notify you of incoming calls and other events. You can perform the following functions in the external display. Setting Phone Ring Style Press 1 volume buttons...
Locking and Unlocking Your Phone You can lock your phone manually or set the phone to lock automatically whenever you turn it off. To use a locked phone, you must enter the unlock code. A locked phone still rings or vibrates for incoming calls or messages, but you must unlock it to answer.
Unlocking Your Phone At the Enter Unlock Code prompt: Press 1 keypad keys 2 OK ( Changing a Code or Password Your phone’s unlock code is originally set to 1234, and the security code is originally set to 000000. Your service provider may reset these before you receive your phone.
Page 61
To change a code or password: Find the Feature Press 2 CHANGE ( 3 keypad keys 4 OK ( 5 keypad keys 6 OK ( 7 keypad keys 8 OK ( > Settings > Security > New Passwords scroll to the code or password select the code or password enter your old code or password...
If You Forget a Code or Password If you forget your security code, contact your service provider. If you forget your unlock code, try entering 1234 or the last 4 digits of your phone number. If that does not work, do the following at the Enter Unlock Code prompt: Press 2 keypad keys...
Setting Up Your Phone Storing Your Name and Phone Number To store or edit your name and phone number information: Find the Feature Setting the Time and Date You must set the time and date to use the datebook. Find the Feature Setting a Ring Style Your phone rings or vibrates to notify you of an incoming call or other event.
The ring style indicator in the display shows the current ring style (see page 41). To set a ring style: Find the Feature Press 2 SELECT ( Each ring style contains settings for specific event alerts, ringer ID, and ringer and keypad volume. To change these settings, press Setting Answer Options You can use different methods to answer an incoming...
The screen saver image is shrunk to fill the display, if necessary. On some networks, an animation repeats for 1 minute and then stops. Find the Feature Press 2 CHANGE ( up or down 4 SELECT ( 6 CHANGE ( 8 SELECT ( 9 DONE ( Zooming In and Out...
You can also zoom in and out from the menu. Find the Feature Setting Display Contrast Find the Feature Adjusting the Backlight You can set the amount of time that the display backlight remains on, or turn off the backlight to conserve battery power.
Your phone prompts you when the network or a service asks for your location. You can refuse to allow access to this information. When ALI is set to 911 Only , your phone displays the (ALI off) indicator, and the phone does not send location information unless you call the emergency phone number (such as 911).
• when your AGPS antenna is covered (for example, by your hand or other object) or facing the ground • when there are temperature extremes outside the operating limits of the phone Even where location information can be calculated in such situations, it may take more time than usual, and your location estimate may not be as accurate.
Calling Features For basic instructions on how to make and answer calls, see page 19. Changing the Active Line Change the active phone line to make and receive calls from your other phone number. Find the Feature The active line indicator in the display shows the current active phone line (see page 43).
Using Automatic Redial If the network is busy, you hear a fast busy signal, and your phone displays Call Failed . With automatic redial, your phone automatically redials the number for 4 minutes. When the call goes through, your phone rings or vibrates 1 time, displays Redial Successful , and then connects the call.
Canceling an Incoming Call While the phone is ringing or vibrating: Press or IGNORE ( Depending on your phone settings and/or service subscription, the call may be forwarded to voice mail, another number, or the caller may hear a busy signal. Turning Off a Call Alert You can turn off your phone’s incoming call alert before answering the call.
be placed due to network, environmental, or interference issues. Press 1 keypad keys Using AGPS During an Emergency Call When you make an emergency call, your phone's assisted-Global Positioning System (AGPS) feature can calculate your approximate location and help emergency service personnel find you.
If your phone does not have adequate access to AGPS satellite signals, the location of the nearest cell tower in contact with your phone is automatically provided to the emergency response center. Because of the limitations of the AGPS feature, always provide your best knowledge of your location to the emergency response center, just as you would when using a phone without AGPS capabilities.
Press VIEW The Last Calls Menu can include the following options: Option Store Delete Delete All Send Message Add Digits Attach Number Send Tones call the entry’s number Tip: Press and hold 2 seconds to send the number as DTMF tones during a call.
Returning an Unanswered Call Your phone keeps a record of your unanswered calls, and displays: • the (missed call) indicator • X Missed Calls Y Unknown , where X is the total number of missed calls and Y is the number of missed calls with no caller ID information Press 1 VIEW (...
Calling With Speed Dial Each entry you store in your phonebook is assigned a unique speed dial number. Tip: To see an entry’s speed dial number, press > Phonebook , scroll to the entry, press VIEW ( To speed dial a phonebook entry: Press 1 keypad keys Calling With 1-Touch Dial...
Using Voicemail Voicemail messages that you receive are stored on the network. To listen to your messages, you must call your voicemail phone number. Note: Your service provider may include additional information about using this feature. Listening to a Voicemail Message Find the Feature Shortcut: If your voicemail number is stored as phonebook entry number 1, press and hold...
Receiving a Voicemail Message When you receive a voicemail message, your phone displays the New VoiceMail Press CALL The phone calls your voicemail phone number. If no voicemail phone number is stored, your phone prompts you to store one. Storing Your Voicemail Phone Number If necessary, use the following procedure to store your voicemail phone number.
Turning Off the Voice Message Waiting Indicator To clear the (voice message waiting) indicator: Find the Feature Muting the Phone To mute your phone during a call, press MUTE ( Using Call Waiting When you are on a call, an alert tone sounds to indicate that you have received another call.
Calling a Number In a Text Message To call a phone number in a text message that you receive, highlight the message and then: Press 3 SELECT ( 4 CALL ( open the Inbox Menu Note: Skip this step if the message is already opened.
Settings Menu • Ring Styles • Style • Style Detail • My Tones • Phone Status • My Tel. Number • Active Line • Battery Meter • Other Information • Browser Setup • Connection • Incoming Call • In-Call Setup •...
Feature Quick Reference You can do more with your phone than make and receive phone calls! For example, you can store frequently called numbers in the phonebook for easy dialing, organize your meetings and other events in the datebook, browse the Web, download ring tones, send messages, and more.
Messaging Features Feature Send Message Receive Message Stored Message Phonebook Features Feature Create Entry Create a new phonebook entry: Dial Number Call a number stored in the Voice Name Dial a number stored in the Description Send a text message: >...
Feature Description Voice Record a voice name for a Record phonebook entry: S > Voice Name Personalizing Features Feature Description Ring Style Change a ring style: > ring event Ring Adjust ringer volume: Volume > Ring Volume Keypad Adjust keypad keystroke volume: Volume >...
Feature Shortcuts Main Menu Menu Features Feature Language Master Reset Master Clear Description Create a shortcut to a menu item: Highlight the menu item, then press and hold Select a shortcut: > Shortcuts > shortcut name Change the order of the main menu: >...
Dialing Features Feature Description Auto Turn on or turn off the automatic redial Redial feature. > Initial Setup > Auto Redial Auto PIN Automatically dial an Dial authenticating PIN code for outgoing calls: > Initial Setup > Auto PIN Dial DTMF Activate DTMF tones: >...
Call Monitoring Features Network connection time is the elapsed time from the moment you connect to your service provider's network to the moment you end the call by pressing the end key. This time includes busy signals and ringing. The amount of network connection time you track on your resettable timer may not equal the amount of time for which you are billed by your service provider.
Handsfree Features Note: The use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products. Feature Description Speaker- Activate the internal speakerphone for phone handsfree operation during a call: Press Auto...
Feature Power-Off Delay (car kit) Charger Time (car kit) Data and Fax Call Features Feature Send Data Connect your phone to the Receive Data Description Set the phone to stay on for a specified time after the ignition is switched off: >...
Network Features Feature Description Network View network information and Settings adjust network settings: > Other Settings > Network Hide or To use the Automatic Location Show Information (ALI) feature to let the Location network know your location: Personal Organizer Features Feature Description Add an event to the datebook:...
Feature Play Voice Record Calculator Calculate numbers: Currency Converter Security Features Feature Lock Application News and Entertainment Features Feature Launch Browser Picture Viewer Description Play back a voice recording: > Voice Record > voice note > Calculator Convert currency: > Calculator >...
Specific Absorption Rate Data This model wireless phone meets the government’s requirements for exposure to radio waves. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S.
Page 94
2. The SAR information includes the Motorola testing protocol, assessment procedure, and measurement uncertainty range for this product.
Consumer Information on Wireless Phones from the FDA The U.S. Food and Drug Administration (FDA) provides consumer information on wireless phones at: http://www.fda.gov/cellphones/qa.html Following are safety-related questions and answers discussed at this web site. Do wireless phones pose a health hazard? The available scientific evidence does not show that any health problems are associated with using wireless phones.
Page 96
case, FDA could require the manufacturers of wireless phones to notify users of the health hazard and to repair, replace or recall the phones so that the hazard no longer exists. Although the existing scientific data do not justify FDA regulatory actions, FDA has urged the wireless phone industry to take a number of steps, including the following: •...
Page 97
FCC also regulates the base stations that the wireless phone networks rely upon. While these base stations operate at higher power than do the wireless phones themselves, the RF exposures that people get from these base stations are typically thousands of times lower than those they can get from wireless phones.
Page 98
What steps can I take to reduce my exposure to radio frequency energy from my wireless phone? If there is a risk from these products--and at this point we do not know that there is--it is probably very small. But if you are concerned about avoiding even potential risks, you can take a few simple steps to minimize your exposure to radio frequency energy (RF).
Page 99
precautionary; it was not based on scientific evidence that any health hazard exists. Do hands-free kits for wireless phones reduce risks from exposure to RF emissions? Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to believe that hands-free kits reduce risks.
Warranty the United States and Canada What Does this Warranty Cover? Subject to the exclusions contained below, Motorola, Inc. warrants its telephones, pagers, and consumer and professional two-way radios (excluding commercial, government or industrial radios) that operate via Family Radio Service or General Mobile Radio Service, Motorola-branded or certified accessories sold for use with these Products (“Accessories”)
Page 101
Unauthorized Service or Modification. Defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, or modification in any way by someone other than Motorola, or its authorized service centers, are excluded from coverage. Length of Coverage Ninety (90) days from the date of purchase by the first consumer purchaser of the product.
This warranty extends only to the first consumer purchaser, and is not transferable. What Will Motorola Do? Motorola, at its option, will at no charge repair, replace or refund the purchase price of any Products, Accessories or Software that does not conform to this warranty. We may use functionally equivalent...
You will receive instructions on how to ship the Products, Accessories or Software, at your expense, to a Motorola Authorized Repair Center. To obtain service, you must include: (a) a copy of your receipt, bill of sale or other comparable proof of purchase;...
Page 104
Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted Motorola software such as the exclusive rights to reproduce and distribute copies of the Motorola software.
Product registration is an important step toward enjoying your new Motorola product. Registering helps us facilitate warranty service, and permits us to contact you should your product require an update or other service. Registration is for U.S. residents only and is not required for warranty coverage.
Wireless: The New Recyclable Your wireless phone can be recycled. Recycling your wireless phone reduces the amount of waste disposed in landfills and allows recycled materials to be incorporated into new products. CTIA and its members encourage consumers to recycle their phones and have taken steps to promote the collection and environmentally sound recycling of end-of-life wireless devices.
Index Numerics 1-touch dial defined 76 using 76 voicemail number 76 3-way call 83 accessories optional 83 accessory connector port 1 active line indicator defined 43 illustration 41 AGPS during an emergency call alarm 28, 30 alert creating 85 defined 63 setting 22, 27 turning off 71 analog signal indicator...
Page 108
browser. See micro-browser button smart 57 speakerphone 1 volume control 1, 18 calculator 92 calendar. See datebook call 3-way call 83 adding digits after phone number 74 alert, turning off 71 answer options 64 answering 20 call waiting 79 canceling 71 deleting 73 dialed calls list 73 emergency number 71,...
Page 109
copying an event 36 day view 29 deleting an event 37 event reminders 37 event view 29 reminders 30 repeat interval 33 start time 38 storage duration 38 using 28 view event 91 week view 28 defined 57 deleting a call 73 dialed calls list 73 digital signal indicator defined 42...
Page 110
headset use with external display headset jack 1 hide location 91 hiding location AGPS 67 showing location 66, 67 idle display, defined 41 in use indicator defined 42 illustration 41 Incoming Call message 70 incoming phone call, canceling 71 indicators active line 41, 43 automatic location information (ALI)
Page 111
left soft key functions 1, 41 personalizing 85 location hiding 66, 67 showing 66, 67 location information hiding or showing 91 location privacy indicator 41 lock application 92 phone 59 locking keypad 62 loud ring style indicator 42, Low Battery message 42 main menu change order of 86...
Page 112
notepad 75 numeric text mode 47 optional feature, defined 14 passwords. See codes phone active line indicator 43 active line, changing 69 alert, turning off 71 answer options 64 clear stored information codes 60 date, setting 63 flip 18 keypad, answering calls language, setting 86 locking 59 network settings 91...
Page 113
received calls list 73 recent calls 73 redial automatic redial 70 busy number 69 reference guide 13 reminders datebook 30 restricting calls 83 right soft key functions 1, 41 personalizing 85 ring alert turning off 71 ring style defined 64 indicators 42, 63 personalizing 64, 85 ring style indicator...
Page 114
speakerphone, activating speed dial number, defined 76 using 76 standby time 56 status light 1, 56 storing a call 73 symbol text mode 47, 50 symbols, entering 50 tap method text entry 47 telephone number, viewing your own 81 text block cursor 46 browse mode 47 character chart 49...
Page 115
voice message waiting indicator 78, 79 voice number dialing 84 voice record 91 phonebook entry 85 voicemail dialing with 1-touch dial using 77 volume earpiece 18 keypad 85 ringer 18, 85 volume buttons 1, 18 warranty 100–104 Web pages 24, 92 zooming in/out 65...
1 Get to know your Motorola wireless phone and its features such as speed dial and redial. If available, these features help you to place your call without taking...
Page 118
2 When available, use a hands-free device. If possible, add an additional layer of convenience to your wireless phone with one of the many Motorola Original™ hands- free accessories available today. 3 Position your wireless phone within easy reach. Be able to access your wireless phone without removing your eyes from the road.
Page 119
8 Use your wireless phone to call for help. Dial 9-1-1 or other local emergency number in the case of fire, traffic accident or medical emergencies.* 9 Use your wireless phone to help others in emergencies. If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call 9-1-1 or other local emergency number, as you would want others to do for you.*...
Page 120
Check the laws and regulations on the use of wireless telephones and their accessories in the areas where you drive. Always obey them. The use of these devices may be prohibited or restricted in certain areas. For more information, please call 1-888-901-SAFE or visit the CTIA Web site at...