NEC WT610 Installation Manual
Desktop and ceiling mount
Hide thumbs
Also See for WT610:
- Setup manual (152 pages) ,
- Installation manual (7 pages) ,
- Specifications (2 pages)
Table of Contents
Advertisement
Quick Links
WT610™ Installation Guide
Desktop and Ceiling Mount
Contents
Diagrams and Distance Charts
Product Description
Type:
1 chip DMD
4 mirror bounce optical system
Native Resolution:
1024 x 768 (1024x576 for 16:9 screens)
Brightness:
2000 lumens (1500 ANSI)
Power Consumption: 370W (max)
Screen/Aspect Ratio_
Both 4:3 and 16:9 screens are fully supported with proper aspect ratio control for both type sources using NEC developed
scaling technology. By selecting the screen type in the menus, Aspect Ratio control is reconfigured for that screen type.
Notes
•
For screen sizes not indicated on the projection charts, use the formulas below.
If the figures on the tables do not match the results of formulas, use the figures in the table.
•
All calculations are based on 4:3 aspect ratio.
•
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary ±5%.
•
Formulas
The Projection Formulas use the image width for calculation. Image width is the same for all aspect ratios, only vertical image size
varies. For proper projector placement, determine the image width for a desired screen size. Use the Screen Formulas below to
calculate all screen dimensions. Plug the screen width in for "W" in the Projection Formulas.
Refer to the diagrams and charts for popular screen sizes on page 2 and 3.
Definitions:
W = Screen width
H = Screen height
B = Vertical distance between projector foot and screen center
C = Throw distance
D = Vertical distance between projector foot and screen bottom
(screen top for ceiling mounted application)
Projection Formulas:
B = 0.6882W + 3.935
C = 0.4874W - 13.056
D(4:3) = 0.3132W + 3.935
D(16:9) = 0.407W + 3.935
Vertical Position for a 16:9 screen: The Vertical Position adjustment moves the 16:9 image up and down in the unused portion of
the 4:3 DLP panel. This adjustment is only available when the projector is set for 16:9 in the "Screen" menu. The range of Vertical
Position is dependent on aspect ratio and 3D Reform used. If 3D Reform is not used, the approximate range of vertical position is
+/-0.167H (H=Screen Height) when using a 16:9 screen. (See "Screen Type" and "Position" in user manual)
www.necdisplay.com
TM
Lens-less projector
NEC Display Solutions of America, Inc.
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Dimensions:
15.0"(W) x 12.3"(H) x 12.3"(D) w/final mirror up
Weight:
14.1 lbs
Screen Range: 40" - 100" Diagonal (4:3)
Fan Noise:
37 dB / 32dB @ 1 meter
BTU's:
1262 BTU/hour
4:3 Screen Formulas:
W = H x 4/3
H = W x 3/4
16:9 Screen Formulas:
W = H x 16/9
H = W x 9/16
Screen Diagonal = W x 18.358/16
WT610E
Page 1 of 9
v2.3
Advertisement
Table of Contents
Related Manuals for NEC WT610
Summary of Contents for NEC WT610
-
Page 1: Table Of Contents
Screen/Aspect Ratio_ Both 4:3 and 16:9 screens are fully supported with proper aspect ratio control for both type sources using NEC developed scaling technology. By selecting the screen type in the menus, Aspect Ratio control is reconfigured for that screen type. -
Page 2: Ceiling Mounted Installation
WT610™ Installation Guide Desktop and Ceiling Mount Ceiling Mounted Installation The following diagram shows the relationship between projector position and the screen. Refer to the charts below for data. Distances are in inches. For millimeters multiply by 25.4. 5.1" 37°... -
Page 3: Desktop Setup
Desktop and Ceiling Mount Desktop Setup The following diagram shows the relationship between projector position and the screen. Refer to the charts below for data. Distances are in inches. For millimeters multiply by 25.4. Vertical Position for a 16:9 screen: The Vertical Position adjustment moves the 16:9 image up and down in the unused portion of the 4:3 DLP panel. -
Page 4: Cabinet Dimensions
WT610™ Installation Guide Desktop and Ceiling Mount Cabinet Dimensions The following drawings show the cabinet dimensions for the WT610. Dimensions are in inches. For millimeters multiply by 25.4. Mirror cover open Ventilation outlet 0.378 mount standoff 12.32 8.94 www.necdisplay.com Lamp cover Mirror cover closed NEC Display Solutions of America, Inc. -
Page 5: Bottom, Back And Left Side
NEC Display Solutions of America, Inc. WT610™ Installation Guide Desktop and Ceiling Mount v2.3 Cabinet Dimensions (continued) The following drawings show the cabinet dimensions for the WT610. Dimensions are in inches. For millimeters multiply by 25.4. Speakers M4*8 MAX For mount Ventilation inlet 7.87... -
Page 6: Optional Ceiling Mount Dimensions
WT610™ Installation Guide Desktop and Ceiling Mount Optional Ceiling Mount Dimensions (Model #: WT60CM) The following drawings show the ceiling mount dimensions for the WT610. Dimensions are in inches. For millimeters multiply by 25.4. 9.88 4.50 ROLL 7.87 www.necdisplay.com 1.5" NPT... -
Page 7: Optional Wall Mount Dimensions
NEC Display Solutions of America, Inc. WT610™ Installation Guide Desktop and Ceiling Mount v2.3 Optional Wall Mount Dimensions (Model #: WT60WM) Opened Closed Projector Mounting Points 16.49 7.48 0.52 8.50 17.00 Projector Mounting Points www.necdisplay.com WT610E Page 7 of 9... -
Page 8: Optional Wall Mount Dimensions Cont
NEC Display Solutions of America, Inc. WT610™ Installation Guide Desktop and Ceiling Mount v2.3 Optional Wall Mount Dimensions (Model #: WT60WM) Note: The WT60WM wall mount can accommodate screen sizes of 52.7” – 83” diagonally based on the minimum and maximum throw distances shown below. -
Page 9: Control Codes
None Communications: Full duplex NOTE 1: It is recommended to set the projector to “Idle Mode” in the Setup menu for best Power ON response. NOTE 2: Pins 2, 3, 5, 6 and 8 are used inside the projector. NOTE 3: For long cable runs it is recommended to set communication speed in the Setup menu to 9600 bps.