Mitsubishi Electric MELSEC iQ-F Series Quick Connection Manual
Programmable controller
Hide thumbs
Also See for MELSEC iQ-F Series:
- User manual (318 pages) ,
- Handbook (132 pages) ,
- Programming manual (128 pages)
Related Manuals for Mitsubishi Electric MELSEC iQ-F Series
Summary of Contents for Mitsubishi Electric MELSEC iQ-F Series
- Page 1 Quick Connection Guide Simple CPU Communication Function KEYENCE CORPORATION KV Series...
-
Page 2: Introduction
The content, including specifications, in this manual may be changed for improvement without notice. For devices other than those manufactured by Mitsubishi Electric described in this manual, please acquire manuals and check the safety precautions and descriptions. -
Page 3: Table Of Contents
CONTENTS INTRODUCTION ...............................1 CONTENTS ................................2 RELEVANT MANUALS .............................3 OVERVIEW ................................4 Applicable Devices ............................4 System Configuration ..........................5 SETTINGS FOR THE KV-8000 .........................6 Parameter Setting ............................6 SETTINGS FOR THE FX5U ..........................8 Parameter Setting ............................8 OPERATION CHECK ............................10 Operation Example ...........................10 Check method ............................10 REVISIONS ................................12 WARRANTY ................................12 TRADEMARKS ................................12... -
Page 4: Relevant Manuals
RELEVANT MANUALS The following lists the relevant manuals. Please download those manuals from the website of each manufacturer. ◼ Mitsubishi Electric Manual name Manual number MELSEC iQ-F FX5S/FX5UJ/FX5U/FX5UC User's Manual (Hardware) SH-082452ENG MELSEC iQ-F FX5 User's Manual (Application) JY997D55401 MELSEC iQ-F FX5 User's Manual (Ethernet Communication) -
Page 5: Overview
1.1 Applicable Devices The following table lists the devices that support the simple CPU communication function described in this manual. Manufacturer Applicable device FX5U CPU module FX5UC CPU module Mitsubishi Electric FX5UJ CPU module FX5S CPU module KEYENCE CORPORATION KV series... -
Page 6: System Configuration
Model KEYENCE CORPORATION KV series KV-8000 Configuration personal computer (OS: Windows 10) Switching hub FX5U-32MT/ES Mitsubishi Electric FX5 CPU module Serial number: 17X**** or later Firmware version: 1.210 or later GX Works3 Version: 1.065T or later Mitsubishi Electric Engineering software (In this manual, Ver.1.085P is used as an... -
Page 7: Settings For The Kv-8000
2. SETTINGS FOR THE KV-8000 Set the parameters of the KV-8000 using KV STUDIO (programming support software) manufactured by KEYENCE CORPORATION. 2.1 Parameter Setting ❖ Point Check that the RUN-PRG Selector Switch of the PLC is in the RUN state. ... - Page 8 In the [Setup unit(2)] tab, set the IP address and subnet mask of the KV-8000. IP Address: 192.168.3.1 Subnet Mask: 255.255.255.0 (default) Click [Apply] to save the settings. Connect the configuration personal computer with the PLC. From the KV STUDIO menu, select [Monitor/Simulator] →...
-
Page 9: Settings For The Fx5U
3. SETTINGS FOR THE FX5U Set the parameters of the MELSEC iQ-F series FX5U CPU module using GX Works3. 3.1 Parameter Setting From the GX Works3 menu, select [Project] → [New]. Set the series and model, and click the [OK] button. - Page 10 Select the communication pattern of Setting No.1. Communication Pattern: Read Click the [...] button of "Source" of "Communication Destination". Set each item on the "Communication Destination Setting" window as follows. <Setting No.1> Device Type: KEYENCE(KV series) IP Address: 192.168.3.1 Host Station Port No.: 5570 Click the [OK] button.
-
Page 11: Operation Check
4. OPERATION CHECK Check whether the FX5U-32MT/ES and KV-8000 communicate successfully in the simple CPU communication. If an error occurs, refer to the following manuals. Troubleshooting in the MELSEC iQ-F FX5 User's Manual (Ethernet Communication) List of PLC Unit Errors in the KV-8000 Series User's Manual 4.1 Operation Example The specified bit device value or word device value is periodically communicated between the FX5U-32MT/ES and the KV-8000. - Page 12 <GX Works3> Check that the device data is written from the FX5U-32MT/ES to the KV-8000. In this manual, enter 5 to the current value of D100 and 1 to the current value of X117 in GX Works3. When W00 is 5 and R015 is in KV STUDIO, <KV STUDIO>...
-
Page 13: Revisions
REVISIONS Revision date Revision Description January 2023 First edition WARRANTY Please confirm the following product warranty details before using this product. MELSEC iQ-F FX5S/FX5UJ/FX5U/FX5UC User's Manual (Hardware) [WARRANTY] Manual for KV series manufactured by KEYENCE CORPORATION used [WARRANTIES AND DISCLAIMERS] TRADEMARKS The company names, system names and product names mentioned in this manual are either registered... - Page 14 MITSUBISHI ELECTRIC EUROPE B.V. French Branch Tel : +33-1-55-68-55-68 25, Boulevard des Bouvets, 92741 Nanterre Cedex, France Fax : +33-1-55-68-57-57 Czech Republic MITSUBISHI ELECTRIC EUROPE B.V. Czech Branch, Prague Office Tel : +420-255-719-200 Pekarska 621/7, 155 00 Praha 5, Czech Republic Poland MITSUBISHI ELECTRIC EUROPE B.V.