Table of Contents
Advertisement
1.2 Conduit box mounting
1. Locate the metal mounting plate provided in the In-wall mount kit. Line up the mounting plate with your
conduit box and mount it in place using the provided conduit box screws.
2. Place the mounting plate cover over the mounting plate.
1.3 Surface mounting
1. Plug the USB-C end of your power cord into the port on the back of the surface mount and fit the cord into
the well that extends from the USB-C port to the bottom edge of the surface mount.
2. For LoRaWAN data connectivity, screw the LoRa Gateway Antenna onto the top of the surface mount as
follows.
A6V13562246_en--_a
Mounting and installation
Conduit box mounting
1
7 | 16
Advertisement
Table of Contents
