M.2 Solid-State Drive; Removing The M.2 2230 Solid-State Drive - Dell Latitude 3540 Service Manual
Hide thumbs
Also See for Latitude 3540:
- Service manual (135 pages) ,
- Owner's manual (59 pages) ,
- Setup and specifications manual (38 pages)
Table of Contents
Advertisement
Steps
1. Align the notch on the memory module with the tab on the memory module slot.
2. Slide the memory module firmly into the slot at an angle.
3. Press the memory module down until it clicks into place.
NOTE:
If you do not hear the click, remove the memory module and reinstall it.
Next steps
1. Install the battery.
2. Install the
base
cover.
3. Follow the procedure in
M.2 solid-state drive
Removing the M.2 2230 solid-state drive
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
About this task
NOTE:
This procedure applies only to systems shipped with a M.2 2230 solid-state drive installed.
NOTE:
The M.2 solid-state drive that is installed on your system depends on the configuration ordered. Supported card
configurations on the M.2 solid-state drive slot are:
● M.2 2230 solid-state drive
● M.2 2280 solid-state drive
After working inside your
Before working inside your
computer.
computer.
Removing and installing components
21
Advertisement
Table of Contents
