Page 26 Instructions...
Page 27 Thank you for purchasing a Canon product. Canon RF24mm F1.8 MACRO IS STM is a Camera Firmware and macro lens for use with EOS R series cameras. Camera Applications “IS” stands for Image Stabilizer. Please use the latest versions of firmware and “STM”...
Page 28 Safety Precautions Precautions to ensure that the camera is used safely. Read these precautions thoroughly. Make sure all details are observed in order to prevent risks and injury to the user and other people. Details pertaining to risks that may Warning result in death or serious injury.
Page 29 General Precautions Handling Precautions Shooting Precautions Do not leave the product in excessive heat such as When the camera recovers from the auto power off in a car in direct sunlight. High temperatures can status to the standby status, the front end of the lens cause the product to malfunction.
Page 30 This device complies with Part 15 of the FCC Rules. CAN ICES-3 (B) / NMB-3 (B) Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 31 Nomenclature Hood mount (→ 13) Focusing ring (→ 7) Lens mount index (→ 6) Filter mounting thread (→ 14) Control ring (→ 8) Contacts (→ 6) Focus mode switch (→ 7) Lens mount (→ 6) Image stabilizer switch (→ 9) For detailed information, reference page numbers are provided in parentheses (→...
Page 32 1. Attaching and Detaching the Lens Lens mount index Set the camera’s power switch to OFF when attaching or detaching the lens. Attach the lens cap before detaching the lens from the camera. When the power switch of the camera is set to OFF, the focus lens pushed forward is automatically stored.* Do not detach the lens until the lens is completely stored.
Page 33 2. Setting the Focus Mode Focus mode switch Quickly turning the focusing ring may result in delayed focus. Due to the structural characteristics, the focus lens driving speed may vary according to the variation in the air temperature and posture. Do not touch the operating part in the front of the lens while the focus lens is operating.
Page 34 There are cases in which the sound of control ring operations may be recorded when shooting movies. The clicking sensation of the control ring can be removed by the Canon Service Center. (chargeable) ENG-8...
Page 35 4. Image Stabilizer The shorter the focusing distance is, the less the image stabilizer effect. The Image Stabilizer cannot compensate for a blurred shot caused by a subject that moved. The Image Stabilizer may not be fully effective if you shoot from a violently shaking vehicle or other transportation.
Page 36 Image Stabilizer The Image Stabilizer for this lens is suited to hand-held shots in the following conditions. In semi-darkened areas such as indoors or outdoors at night. In locations where the flash cannot be used, such as art museums and theater stages. In situations where your footing is uncertain.
Page 37 5. Hand-held Close-up (Macro) Shooting This lens allows users to focus from infinity to a magnification of 0.5x for close-up (macro) shooting. Hold the camera steadily Hold the camera steadily as shown in the illustration on the right when taking hand-held close-ups (macro), and shoot carefully to minimize camera shake and prevent focus blurring.
Page 38 6. Exposure When Taking Close-up (Macro) Shots When deciding the exposure using a hand-held Setting the Exposure exposure meter, apply the following exposure When taking photographs using TTL metering, factor. no exposure compensation is necessary because the light coming through the lens is measured. Magnification (x) With TTL metering, photographing with AE (auto 0.20/...
Page 39 7. Hood (Sold separately) The custom lens hood reduces unwanted light that causes flare and ghosting and protects the front of the lens from rain, snow, and dust. Attachment position mark Red dot Button Detaching the Hood Red dot Red dot Keep your finger pressed down on the button Attachment position mark located on the side of the hood, and then turn...
Page 40 It provides the following magnifications. Only one filter may be attached. 250D: 0.10 to 0.58x If you need a polarizing filter, use the Canon 500D: 0.05 to 0.55x Circular Polarizing Filter PL-C B. Detach the hood when adjusting the polarizing MF mode is recommended for accurate filter.
Page 41 Specifications 24mm f/1.8 Focal Length/Aperture 9 groups, 11 elements Lens Construction Maximum Aperture f/1.8 Minimum Aperture f/22 Angle of View Horizontal: 74°, Vertical: 53°, Diagonal: 84° Min. Focusing Distance 0.14 m/0.45 ft. 0.5x Max. Magnification Approx. 72 x 48 mm/2.83 x 1.89 in. (0.14 m/0.45 ft.) Field of View 52 mm Filter Diameter...
Page 42 Multiple exposure shooting is not possible when using this lens on certain cameras*. * EOS R, RP, Ra, R5, R6 All data listed is measured according to Canon standards. Product specifications and appearance are subject to change without notice. ENG-16...
Page 45 Contents Introduction..........10 Package Contents.
Page 46 Self Portrait Mode..........Portrait Mode.
Page 47 Manual Exposure Compensation........194 Exposure Lock (AE Lock)........196 ISO Speed Settings for Still Photos.
Page 48 Shooting Information Display........290 Reverse Display.
Page 49 Customizing AF Functions........450 Selecting the Drive Mode.
Page 50 Connecting to EOS Utility........587 Uploading Images to image.canon....... . . 594 Connecting to a Printer via Wi-Fi.
Page 51 Auto Rotate..........685 Adding Orientation Information to Movies.
Page 52 Troubleshooting Guide......... . 759 Error Codes.
Page 53: Introduction
After shooting, play images back and check whether they have been properly recorded. If the camera or memory card is faulty and images cannot be recorded or transferred to a computer, Canon cannot be held liable for any loss or inconvenience caused. Copyrights...
Page 54: Package Contents
), interface cable, or HDMI cable. If you purchased a Lens Kit, check that the lenses are included. Be careful not to lose any of these items. No software CD-ROM is included. Software ( ) can be downloaded from the Canon website.
Page 55 Caution When you need Lens Instruction Manuals, download them from the Canon website Lens Instruction Manuals (PDF files) are for lenses sold separately, and when a lens kit is purchased, some accessories included with the lens may not match those listed in the Lens Instruction Manual.
Page 56: Supplemental Information
Supplemental Information Refer to the following website for information on lenses compatible with camera features, and for supplemental information about the camera. https://cam.start.canon/H001/...
Page 57: Compatible Accessories
Compatible Accessories Check the following website for details on compatible accessories. https://cam.start.canon/H002/...
Page 58: Instruction Manuals
The included Instruction Manual provides basic camera instructions. Advanced User Guide Complete instructions are provided in this Advanced User Guide. For the latest Advanced User Guide, refer to the following website. https://cam.start.canon/C011/ Lens/Software Instruction Manual View or download from the following website. https://cam.start.canon/ Note Select [ : Manual/software URL] to display the QR code on the camera screen.
Page 59: Quick Start Guide
Quick Start Guide Insert the battery ( Upon purchase, charge the battery to start using ( Insert the card ( Insert the card with the label facing the front of the camera until it clicks into place.
Page 60 Attach the lens ( Align the red mount index on the lens with the red mount index on the camera to attach the lens. Set the power switch to < >, then set the Mode dial to < > ( All the necessary camera settings is set automatically.
Page 61 Focus on the subject ( A tracking frame [ ] for AF appears over any face detected. Press the shutter button halfway, and the camera will focus on the subject. If [ ] blinks on the screen, manually raise the built-in flash. Take the picture ( Press the shutter button completely to take the picture.
Page 62: About This Guide
About This Guide Icons in This Guide Basic Assumptions for Operational Instructions and Sample Photos Icons in This Guide > Indicates the dial. < < > < > Indicates the direction to press the cross keys (< >). < > <...
Page 63 Basic Assumptions for Operational Instructions and Sample Photos Before following any instructions, make sure the power switch is set to < > ( It is assumed that all the menu settings and Custom Functions are set to their defaults. Illustrations in this guide show the camera with the RF-S18-45mm F4.5-6.3 IS STM lens attached as an example.
Page 64: Compatible Cards
Compatible Cards The following cards can be used with the camera regardless of capacity. If the card is new or was previously formatted (initialized) by another camera or computer, format the card with this camera ( SD/SDHC/SDXC memory cards UHS-I cards supported. Cards That Can Record Movies When recording movies, use a card with ample performance (fast enough writing and reading speeds) for the movie recording size (...
Page 65: Safety Instructions
Safety Instructions Be sure to read these instructions in order to operate the product safely. Follow these instructions to prevent injury or harm to the operator of the product or others. WARNING: Denotes the risk of serious injury or death. Keep the product out of the reach of young children.
Page 66 Observe the following instructions when using commercially available batteries or provided battery packs. • Use batteries/battery packs only with their specified product. • Do not heat batteries/battery packs or expose them to fire. • Do not charge batteries/battery packs using non-authorized battery chargers. •...
Page 67 CAUTION: Follow the cautions below. Otherwise physical injury or property damage may result. Do not fire the flash near the eyes. It may hurt the eyes. Do not look at the screen or through the viewfinder for prolonged periods of time. This may induce symptoms similar to motion sickness.
Page 68: Handling Precautions
The camera is not waterproof and cannot be used underwater. If the camera gets wet, contact a Canon Service Center immediately. Wipe off any water droplets with a dry and clean cloth. If the camera has been exposed to salty air, wipe it with a clean, well-wrung wet cloth.
Page 69 Attach the lens cap to prevent direct sunlight and other light from entering the lens when you are not shooting.
Page 70 Screen and viewfinder The following does not affect images captured by the camera. Although the screen and viewfinder are manufactured with very high precision technology with over 99.99% effective pixels, 0.01% or fewer of the pixels may be dead, and there may also be spots of black, red, or other colors. This is not a malfunction. If the screen is left on for a prolonged period, screen burn-in may occur where you see remnants of what was displayed.
Page 71 Besides dust entering the camera from outside, in rare cases, lubricant from the camera's internal parts may adhere to the front of the sensor. If smudges are visible on images, have the sensor cleaned by a nearest Canon Service Center.
Page 72: Part Names
Part Names Attaching the Strap (11) (12) (13) (14) (15) (16) (17) (18) (19) (10) (20) (21) (22) (26) (23) (24) (25) (27)
Page 73 Mode dial < > Dial < > ISO speed setting button Shutter button Movie shooting button RF lens mount index Image sensor Grip Contacts (10) Lens mount (11) Built-in flash (12) Microphone (13) Speaker (14) < > Focal plane mark (15) Strap mount (16)
Page 74 (14) (20) (15) (21) (10) (16) (22) (11) (17) (12) (18) (13) (19)
Page 75 Multi-function shoe Eyecup Viewfinder eyepiece Screen < > Power switch Viewfinder sensor Terminal cover Access lamp < > Info button (10) < > Quick Control/Set button (11) < > Left/autofocus/manual focus button (12) < > Down/erase button (13) < > Playback button (14) <...
Page 76 Mode dial Features on the Mode dial are grouped into Basic Zone, Creative Zone, and movie recording modes. (1) Basic Zone All you do is press the shutter button. The camera sets everything to suit the subject or scene for shooting. : Scene Intelligent Auto ( : Hybrid Auto ( : Special scene (...
Page 77 (2) Creative Zone These modes give you more control for shooting various subjects as desired. Program AE Shutter-priority AE Aperture-priority AE Manual exposure (3) Movie recording For a variety of movie recording (...
Page 78 Battery Charger LC-E17 Charger for Battery Pack LP-E17 ( Power plug Charge lamp Full-charge lamp Battery slots Battery Charger LC-E17E Charger for Battery Pack LP-E17 ( Power cord socket Charge lamp Full-charge lamp Battery pack slot Power cord...
Page 79 Attaching the Strap Pass the end of the strap through the strap mount from the bottom, then pass it through the strap buckle as shown. Pull the strap to take up any slack and make sure the strap will not loosen from the buckle.
Page 80: Software/Apps
Software/Apps Software/App Overview Installing Computer Software Installing Smartphone Apps Software Instruction Manuals Software/App Overview This section summarizes software used with EOS cameras. Note that installing the software requires an internet connection. The software cannot be installed in environments without an internet connection.
Page 81 Download the software. Connect to the internet from a computer and access the following Canon website. https://cam.start.canon/ Depending on the software, you may need to enter the camera's serial number. The serial number is on the bottom of the camera.
Page 82 Installing Smartphone Apps Always install the latest version. Apps can be installed from Google Play or App Store. You can also access Google Play and App Store from the following Canon website. https://cam.start.canon/...
Page 83 Software Instruction Manuals Check the following website for software instruction manuals. https://cam.start.canon/...
Page 84: Preparation And Basic Operations
Preparation and Basic Operations This chapter describes preparatory steps before you start shooting and the basic camera operations. • Charging the Battery • Inserting/Removing the Battery and Card • Using the Screen • Turning on the Power • Attaching and Detaching RF/RF-S Lenses •...
Page 85: Charging The Battery
Charging the Battery Detach the protective cover provided with the battery. Fully insert the battery into the charger. Do the opposite to remove the battery.
Page 86 Charge the battery. LC-E17 Flip out the charger prongs as shown and plug the charger into a power outlet. LC-E17E Connect the power cord to the charger and insert the plug into a power outlet. Charging starts automatically and the charge lamp (1) lights up in orange.
Page 87 Charge the battery on the day before or on the day it is to be used. Charged batteries gradually lose their charge, even when they are not used. After charging the battery, remove it and disconnect the charger from the power outlet.
Page 88: Inserting/Removing The Battery And Card
Inserting/Removing the Battery and Card Insertion Formatting the Card Removal Insert a fully charged Battery Pack LP-E17 and card in the camera. The captured images are recorded onto the card. Insertion Slide the card/battery compartment cover lock and open the cover. Insert the battery.
Page 89 Insert the card. Insert the card with the label facing the front of the camera until it clicks into place. Caution Make sure the card's write-protect switch (1) is set upward to enable writing and erasing. Close the cover. Press the cover closed, then slide the card/battery compartment cover lock to lock it.
Page 90 Formatting the Card If the card is new or was previously formatted (initialized) by another camera or computer, format the card with this camera (...
Page 91 Removal Slide the card/battery compartment cover lock and open the cover. Set the power switch to < >. Make sure the access lamp (1) is off before opening the card/ battery compartment cover. If [Saving...] is displayed on the screen, close the cover. Removing the battery.
Page 92 Remove the card. Gently push in the card, then let it go to eject. Pull the card straight out, then close the cover. Caution Do not remove cards immediately after a red [ ] icon is displayed as you are shooting. Cards may be hot, due to high internal camera temperature. Set the power switch to <...
Page 93 Caution When the access lamp is lit or blinking, it indicates that images are being written to, read from, or erased from the card, or data is being transferred. Do not open the card/battery compartment cover. To avoid corrupting image data or damaging cards or the camera, never do any of the following while the access lamp is lit or blinking.
Page 94: Using The Screen
Using the Screen You can change the direction and angle of the screen. Flip out the screen. Rotate the screen. When the screen is out, you can tilt it up or down or rotate it to face the subject. Indicated angles are only approximate. Face it toward you.
Page 95 Caution Avoid forcing the screen into position as you rotate it, which puts undue pressure on the hinge. When a cable is connected to a camera terminal, the rotation angle range of the flipped-out screen will be limited. Note Keep the screen closed and facing the camera body when the camera is not in use. You can protect the screen.
Page 96: Turning On The Power
Turning on the Power Setting the Display Language Setting the Date, Time, and Time Zone Connecting the Camera to a Smartphone Battery Level Indicator < > The camera turns on. You can now shoot still photos and record movies. < >...
Page 97 Setting the Date, Time, and Time Zone Set the Date/Time/Zone if the [Date/Time/Zone] setting screen appears. Connecting the Camera to a Smartphone Instructions for connecting to a smartphone are displayed if you select [OK] when the setup screen appears (...
Page 98 Battery Level Indicator When the power switch is set to < >, the battery level will be indicated. Battery level is sufficient. Battery level is low, but the camera can still be used. Battery will be exhausted soon (blinks). Charge the battery. Note Doing any of the following will exhaust the battery faster: •...
Page 99: Attaching And Detaching Rf/Rf-S Lenses
Attaching and Detaching RF/RF-S Lenses Attaching a Lens Detaching a Lens Caution Do not look at the sun directly through any lens. Doing so may cause loss of vision. When attaching or detaching a lens, set the camera's power switch to < >.
Page 100 Attaching a Lens Remove the caps. Remove the rear lens cap (1) and body cap (2) by turning them as shown by the arrows. Attach the lens. Align the red mount index on the lens with the red mount index on the camera and turn the lens as shown by the arrow until it clicks in place.
Page 101 Set the focus mode to < >. < > stands for autofocus. < > stands for manual focus. Autofocus is disabled. For RF lenses without a focus mode switch Set [ : Focus mode] to [AF]. Note You can also select [AF] or [MF] by pressing the < >...
Page 102 For RF lenses with a focus mode switch Set the lens focus mode switch to < >. Because the setting on the lens takes precedence, the camera setting has no effect. Remove the front lens cap.
Page 103 Detaching a Lens While pressing the lens release button, turn the lens as shown by the arrow. Turn the lens until it stops, then detach it. Attach the rear lens cap to the lens you removed.
Page 104: Attaching And Detaching Ef/Ef-S Lenses
Attaching and Detaching EF/EF-S Lenses Attaching a Lens Detaching a Lens All EF and EF-S lenses can be used by attaching an optional Mount Adapter EF-EOS R. The camera cannot be used with EF-M lenses. Attaching a Lens Remove the caps. Remove the rear lens cap (1) and body cap (2) by turning them as shown by the arrows.
Page 105 Attach the lens to the adapter. Align the red or white mount index on the lens with the corresponding mount index on the adapter and turn the lens as shown by the arrow until it clicks into place. (3) Red index (4) White index Attach the adapter to the camera.
Page 106 Set the lens's focus mode switch to < >. < > stands for autofocus. < > stands for manual focus. Autofocus is disabled. Remove the front lens cap.
Page 107 Detaching a Lens While pressing the lens release button, turn the adapter as shown by the arrow. Turn the lens until it stops, then detach it. Detach the lens from the adapter. Hold down the lens release lever on the adapter and turn the lens counterclockwise.
Page 108: Multi-Function Shoe
For details, refer to the accessory's Instruction Manual. Use of accessories not designed for a multi-function shoe requires Multi-Function Shoe Adapter AD-E1, sold separately. For details, refer to the Canon website (...
Page 109 Attaching the shoe cover After removing accessories from the multi-function shoe, reattach the shoe cover to protect the contacts from dust and water. Slide the shoe cover all the way in by pressing the part labeled (B) in the figure, as shown.
Page 110: Using The Viewfinder
Using the Viewfinder Dioptric Adjustment Look through the viewfinder to activate it. You can also restrict display to either the screen or viewfinder ( Dioptric Adjustment Slide the dioptric adjustment slider. Slide the slider left or right to make the viewfinder display look sharp. Caution The viewfinder and screen cannot be activated at the same time.
Page 111: Basic Operations
Basic Operations Holding the Camera Shutter Button < > Dial < > Control Ring < > Info Button...
Page 112 Holding the Camera Viewing the screen as you shoot As you shoot, you can tilt the screen to adjust it. For details, see Using the Screen. (1) Normal angle (2) Low angle (3) High angle Shooting through the viewfinder To obtain sharp images, hold the camera still to minimize camera shake. (1) Horizontal shooting (2) Vertical shooting 1.With your right hand, hold the camera firmly by the camera grip.
Page 113 Shutter Button The shutter button has two steps. You can press the shutter button halfway. Then you can further press the shutter button completely. Pressing halfway This activates autofocusing and the automatic exposure system that sets the shutter speed and aperture value. The exposure value (shutter speed and aperture value) is displayed on the screen or in the viewfinder for 8 sec.
Page 114 Note The camera will still pause before taking a picture if you press the shutter button completely without pressing it halfway first, or if you press the shutter button halfway and immediately press it completely. Even during menu display or image playback, you can return to shooting standby by pressing the shutter button halfway.
Page 115 < > Dial (1) After pressing a button, turn the < > dial. Press a button such as < >, then turn the < > dial. If you press the shutter button halfway, the camera will go back to shooting standby. Used for operations such as setting the ISO speed.
Page 116 < > Control Ring Exposure compensation can be set by turning the control ring of RF lenses or mount adapters while pressing the shutter button halfway in , <Tv>, <Av>, or <M> mode. Otherwise, you can assign a different function to the control ring by customizing it in [ Customize control ring] ( Caution : Focus/control ring] must be set when using lenses that have a combination...
Page 117 < > Info Button Each press of the < > button changes the information shown. The following sample screens are for still photos. * In Basic Zone modes, the screen by (1) is not displayed.
Page 118: Menu Operations And Settings
Menu Operations and Settings Basic Zone Menu Screen Creative Zone Menu Screen Menu Setting Procedure Dimmed Menu Items < > button < > button Screen < > button < > Dial...
Page 119 Basic Zone Menu Screen * In Basic Zone modes, some tabs and menu items are not displayed.
Page 120 Creative Zone Menu Screen Main tabs Secondary tabs Menu items : Shooting : Autofocus : Playback : Wireless features : Set-up : Custom Functions (10) : My Menu (11) Menu settings...
Page 121 Menu Setting Procedure Display the menu screen. Press the < > button to display the menu screen. Select a tab. Press the < > button to switch between main tabs (groups of functions). Turn the < > dial to select a secondary tab. Select an item.
Page 122 Select an option. Press the < >< > keys to select an option (or in some cases, use the < > dial or < >< > keys). The current setting is indicated in blue. Set an option. Press the < >...
Page 123 Dimmed Menu Items Example: When set to single shooting drive mode Dimmed menu items cannot be set. The menu item is dimmed if another function setting is overriding it. You can see the overriding function by selecting the dimmed menu item and pressing the <...
Page 124: Quick Control
Quick Control You can directly and intuitively select and set the settings displayed. Press the < > button ( Select a setting item and set your preferred option. Press the < >< > keys to select a setting item. Turn the < >...
Page 125: Touch-Screen Operation
Touch-Screen Operation Tapping Dragging Tapping Sample screen (Quick Control) Use your finger to tap (touch briefly and then remove your finger from) the screen. For example, when you tap [ ], the Quick Control screen appears. By tapping [ you can return to the preceding screen. Note To have the camera beep for touch operations, set [ : Beep] to [Enable] ( Responsiveness to touch operations can be adjusted in [ : Touch control] (...
Page 126 Dragging Sample screen (Menu screen) Slide your finger while touching the screen.
Page 127: Basic Zone
Basic Zone This chapter describes how to use the Basic Zone modes on the Mode dial for best results. With Basic Zone modes, all you do is point and shoot, and the camera sets everything automatically. • A+: Fully Automatic Shooting (Scene Intelligent Auto) ◦...
Page 128 • Special Scene Mode ◦ Self Portrait Mode ◦ Portrait Mode ◦ Smooth Skin Mode ◦ Group Photo Mode ◦ Landscape Mode ◦ Panoramic Shot Mode ◦ Sports Mode ◦ Kids Mode ◦ Panning Mode ◦ Close-up Mode ◦ Food Mode ◦...
Page 129: A+: Fully Automatic Shooting (Scene Intelligent Auto)
A+: Fully Automatic Shooting (Scene Intelligent Auto) Shooting Moving Subjects Scene Icons Adjusting Settings < > is a fully automatic mode. The camera analyzes the scene and sets the optimum settings automatically. It can also adjust focus automatically on either the still or moving subject by detecting the motion of the subject ( Set the Mode dial to <...
Page 130 Select an Assist feature. Tap [ ] to access the selection screen ( Aim the camera at what you will shoot (the subject). An AF point (1) may be displayed on the subject, under some shooting conditions. When an AF point is displayed on the screen, aim it over the subject.
Page 131 Focus on the subject. Press the shutter button halfway to focus. If [ ] blinks, manually raise the built-in flash. You can also focus by tapping a person's face or other subject on the screen (Touch AF). Under low light, the AF-assist beam ( ) is automatically activated if needed.
Page 132 Note AF operation (One-Shot AF or Servo AF) is set automatically when you press the shutter button halfway. Even when automatically set to One-Shot AF, the camera will switch to Servo AF if subject motion is detected while you are pressing the shutter button halfway.
Page 133 Focusing is not possible (indicated by an orange AF point). Aim the AF point over an area with good contrast, then press the shutter button halfway ). If you are too close to the subject, move away and shoot again. Multiple AF points are displayed simultaneously.
Page 134 Shooting Moving Subjects Pressing the shutter button halfway tracks moving subjects to keep them in focus. Keep the subject on the screen as you hold down the shutter button halfway, and at the decisive moment, press the shutter button completely.
Page 135 Scene Icons The camera detects the scene type and sets everything automatically to suit the scene. An icon representing the detected scene appears in the upper left of the screen ( ) in still photo shooting, or when you press the movie shooting button to record a movie with the Mode dial set to <...
Page 136 Adjusting Settings By tapping icons on the screen, you can adjust settings for image quality, Touch Shutter, Assist, and Creative Assist.
Page 137: A+: Assist Features
A+: Assist Features Selecting Assist Features Creative Assist Creative Bracketing Advanced Selecting Assist Features Select [ Assist]. Select an option.
Page 138 Note From the shooting screen, you can access the selection screen directly by tapping...
Page 139 Creative Assist You can shoot with your preferred effects applied. Press the < > button. Read the message and select [OK]. Select an effect. Use the < > dial to select an effect, then press the < > button.
Page 140 Select the effect level and other details. Set with the < > dial, then press the < > button. To reset the setting, press the < > button, then select [OK].
Page 141 Creative Assist effects ] Preset Select one of the preset effects. Note that [Saturation], [Color tone 1], and [Color tone 2] are not available with [B&W]. ] Background blur Adjust background blur. Choose higher values to make backgrounds sharper. To blur the background, choose lower values.
Page 142 Creative Bracketing Multiple images are captured per shot besides the normal image, each with characteristics such as brightness and color tone automatically changed. Select [ Assist]. Select [Creative bracketing]. Note Index display makes it easier to review the captured images on the camera ( Caution Continuous shooting is not available.
Page 143 Advanced Compositing and other advanced processing is applied to your shots based on scene detection by the camera. Select [ Assist]. Select [Advanced...
Page 144 Check the icon. Blinking scene icon (1): Multiple images are captured per shot and merged into a single image. In this case, only the composite image is saved. Normal scene icon display: Shooting with < > settings ( Caution Continuous shooting is not available. The camera shoots in [Electronic] shutter mode.
Page 145: Hybrid Auto
Hybrid Auto Type of Digest Movie With < > mode, you can make a short movie of the day just by shooting still photos. The camera records approx. 2–4-second clips of scenes before each shot, which are later combined in a digest movie. Set the Mode dial to <...
Page 146 Note For more impressive digest movies, keep the camera aimed at subjects for about 4 sec. before shooting still photos. Battery life is shorter in this mode than in < > mode, because digest movies are recorded for each shot. A digest movie may not be recorded if you shoot a still photo immediately after turning the camera on, selecting <...
Page 147 Set the Mode dial to < >. Select [ : Digest type]. Select an option. Include stills Digest movies include still photos. No stills Digest movies do not include still photos.
Page 148: Special Scene Mode
Special Scene Mode The camera will automatically choose the appropriate settings when you select a shooting mode for your subject or scene. * < > stands for Special Scene. Set the Mode dial to < >. Press the < > button. Select a shooting mode.
Page 149 Review the settings. Press the < > button to display the Quick Control screen. Note You can also set the shooting mode in [ : Shooting mode]. When [ : Mode guide] is set to [Disable], after step 1, press the < >...
Page 150 Available Shooting Modes in <SCN> Mode Shooting Mode Self Portrait Kids Portrait Panning Smooth skin Close-up Group Photo Food Landscape Handheld Night Scene Panoramic shot HDR Backlight Control Sports Silent shutter...
Page 151: Self Portrait Mode
Self Portrait Mode To take shots that include yourself, use [ ] (Self Portrait) mode. Rotate the screen around toward the lens. Customizable image processing includes skin smoothing as well as brightness and background adjustment to make yourself stand out. Shooting tips Set the brightness and smooth skin effect.
Page 152: Portrait Mode
Portrait Mode Use [ ] (Portrait) mode to blur the background and make the person you shoot stand out. It also makes skin tones and hair look softer. Shooting tips Select the location where the distance between the subject and the background is the farthest.
Page 153: Smooth Skin Mode
Smooth Skin Mode Use [ ] (Smooth skin) mode to make skin look more attractive. Image processing makes skin look smoother. Shooting tips Enable the camera to detect faces. Frames are displayed around any main subjects detected for skin smoothing. For more effective skin smoothing, you can move closer to or farther from the subject so that the frame is displayed on the subject's face.
Page 154: Group Photo Mode
Group Photo Mode Use [ ] (Group Photo) mode to take group photos. You can shoot with people from the front to the back all in focus. Shooting tips Use a wide-angle lens. With zoom lenses, zooming out near the wide-angle end makes it easier to focus on everyone in front and back at once.
Page 155: Landscape Mode
Landscape Mode Use [ ] (Landscape) mode for expansive scenery, to keep everything in focus from near to far. For vivid blues and greens, and sharp and crisp images. Shooting tips With a zoom lens, use the wide-angle end. When using a zoom lens, set the lens to the wide-angle end to make the objects near and far in focus.
Page 156: Panoramic Shot Mode
Panoramic Shot Mode Use [ ] (Panoramic Shot) mode to shoot panoramas. The panorama is created by combining shots captured in continuous shooting as you move the camera in one direction while pressing the shutter button completely. Choose a shooting direction. Press the <...
Page 157 > mode images, use a computer or other device to reduce panorama images if you will print them from a memory card inserted in a Canon printer. If panoramas cannot be managed correctly by software or Web services, try resizing them on a computer.
Page 158: Sports Mode
Sports Mode Use [ ] (Sports) mode to shoot subjects in motion, such as runners or moving vehicles. Shooting tips Use a telephoto lens. Use of a telephoto lens is recommended to enable shooting from a distance. Track the subject with the Area AF frame. An Area AF frame appears after you press the shutter button halfway.
Page 159: Kids Mode
Kids Mode Use [ ] (Kids) mode to capture active children who are moving around. Skin tones will look vibrant. Shooting tips Track the subject with the Area AF frame. By default, [ : AF area] is set to [Whole area AF]. Area AF frames (1) appear when you press the shutter button halfway.
Page 160: Panning Mode
Panning Mode By panning, you can blur the background to convey a sense of speed. Attach a lens compatible with [ ] (Panning) mode to reduce subject blurring and keep subjects clear and sharp. Shooting tips Turn the camera to follow the moving subject. As you shoot, turn the camera smoothly while tracking the moving subject.
Page 161 Note The guide appears when a tracking frame is displayed while [ : Whole area tracking Servo AF] is set to [On]. Only the gray lines are shown when the shutter button is not pressed.
Page 162 Consider acquiring Dust Delete Data before shooting. ( For details on lenses compatible with [ ] mode, visit the Canon website ( Shutter speeds are slower. For this reason, Panning mode is not suitable unless you pan as you shoot.
Page 163: Close-Up Mode
Close-up Mode Use [ ] (Close-up) mode for close-ups of small subjects such as flowers. To make small things appear much larger, use a macro lens (sold separately). Shooting tips Use a simple background. A simple background makes small objects such as flowers stand out better. Move in as close as possible to the subject.
Page 164: Food Mode
Food Mode Use [ ] (Food) mode for culinary photography. The photo will look bright and appetizing. Also, the reddish tinge due to the light source will be suppressed in the pictures taken under tungsten lights, etc. Shooting tips Change the color tone. [Color tone] can be adjusted.
Page 165: Handheld Night Scene Mode
Handheld Night Scene Mode ] (Handheld Night Scene) mode enables handheld shooting for night scenes. In this shooting mode, four shots are taken consecutively for each picture, and the resulting image with reduced camera shake is recorded. Shooting tips Hold the camera steady. Keep your elbows close to your body to hold the camera steady ( ).
Page 166: Hdr Backlight Control Mode
HDR Backlight Control Mode Use [ HDR Backlight Control) mode for backlit scenes with both bright and dark areas. Shooting once in this mode captures three consecutive images at different exposures, which are combined to create a single HDR image that retains detail in shadows that might otherwise be lost from backlighting.
Page 167: Silent Shutter Mode
Silent Shutter Mode Where silence is needed, you can shoot without beeps or shutter release sounds. Shooting tips Take some test shots. Consider taking some test shots in advance, because lens aperture and focusing adjustment may be audible under some shooting conditions. Caution Be responsible when using silent shooting, and respect subject privacy and portrait rights.
Page 168: Creative Filters Mode
Creative Filters Mode Creative Filter Characteristics Adjusting the Miniature Effect You can shoot with filter effects applied. Filter effects can be previewed before you shoot. Set the Mode dial to < >. Press the < > button.
Page 169 Select a filter effect. Turn the < > dial to select a filter effect ( ), then press the < > button. The image is shown with the filter effect applied. Adjust the effect and shoot. Press the < > button and select an icon below [Creative filters] (except , or Turn the <...
Page 170 Note With [Grainy B/W], the grainy preview will differ somewhat from the appearance of your shots. With [Soft focus] or [Miniature effect] options, the blurred effect preview may differ somewhat from the appearance of your shots. No histogram is displayed. A magnified view is not available.
Page 171 Creative Filter Characteristics Grainy B/W Makes the image grainy and black and white. By adjusting the contrast, you can change the black-and-white effect. Soft focus Gives the image a soft look. By adjusting the blur, you can change the degree of softness.
Page 172 HDR art embossed The color saturation, brightness, contrast and gradation are decreased to make the picture look flat, so that the picture looks faded and old. The subject outlines will have intensely bright (or dark) edges. Caution Precautions for [ ], [ ], [ ], and [...
Page 173 Adjusting the Miniature Effect Move the scene frame. Use the scene frame to set an area that will look sharp. To make the scene frame movable (displayed in orange), press the < > button or tap [ ] in the lower right of the screen. By tapping ], you can also switch between vertical and horizontal scene frame orientation.
Page 174 Move the AF point as needed and shoot. Use the < > dial or < > keys to move the AF point to the position to focus on. Aligning the AF point and scene frame is recommended. To return the AF point to the center of the screen, press the < >...
Page 175: Creative Zone
Creative Zone Creative Zone modes give you the freedom to shoot in a variety of ways by setting your preferred shutter speed, aperture value, exposure, and more. To clear the shooting mode description displayed when you turn the Mode dial, press the <...
Page 176: P: Program Ae
P: Program AE The camera automatically sets the shutter speed and aperture value to suit subject brightness. * stands for Program. * AE stands for Auto Exposure. Set the Mode dial to . Focus on the subject. Aim the AF point over the subject and press the shutter button halfway. Once the subject is in focus, the AF point turns green (with One-Shot AF).
Page 177 Take the picture. Compose the shot and press the shutter button completely. Caution If the “30"” shutter speed and the lowest aperture value blink, it indicates underexposure. Increase the ISO speed or use flash. If the “1/4000” shutter speed and the highest aperture value blink, it indicates overexposure.
Page 178: Tv: Shutter-Priority Ae
Tv: Shutter-Priority AE In this mode, you set the shutter speed and the camera automatically sets the aperture value to obtain the standard exposure matching the brightness of the subject. A faster shutter speed can freeze the action of a moving subject. A slower shutter speed can create a blurred effect, giving the impression of motion.
Page 179 Focus on the subject. Press the shutter button halfway. The aperture value is set automatically. Check the display and shoot. As long as the aperture value is not blinking, the standard exposure will be obtained. Caution If the lowest aperture value blinks, it indicates underexposure. Turn the <...
Page 180: Av: Aperture-Priority Ae
Av: Aperture-Priority AE Depth-of-Field Preview In this mode, you set the desired aperture value and the camera sets the shutter speed automatically to obtain the standard exposure matching the subject brightness. A higher f/ number (smaller aperture hole) will make more of the foreground and background fall within acceptable focus.
Page 181 Set the desired aperture value. Turn the < > dial to set it. Focus on the subject. Press the shutter button halfway. The shutter speed is set automatically. Check the display and shoot. As long as the shutter speed is not blinking, the standard exposure will be obtained.
Page 182 Note Aperture value display The higher the value, the smaller the aperture opening will be. The aperture value displayed varies depending on the lens. If no lens is attached to the camera, “F00” will be displayed for the aperture.
Page 183 Depth-of-Field Preview The aperture changes only at the moment you shoot, and it remains open at other times. For this reason, the depth of field shown on the screen looks narrow, or shallow. To check the area in focus, assign [ ] (depth-of-field preview) to a button and press it.
Page 184: M: Manual Exposure
M: Manual Exposure Exposure Compensation with ISO Auto In this mode, you set both the shutter speed and aperture value as desired. To determine the exposure, refer to the exposure level indicator or use a commercially available exposure meter. * <M> stands for Manual. Set the Mode dial to <M>.
Page 185 Focus on the subject. Press the shutter button halfway. Check the exposure level mark [ ] to see how far the current exposure level is from the standard exposure level. (1) Standard exposure index (2) Exposure level mark Set the exposure and take the picture. Check the exposure level indicator and set the desired shutter speed and aperture value.
Page 186 Note When ISO Auto is set, you can press the < > button to lock the ISO speed. If you press the < > button and recompose the shot, you can see the exposure level difference on the exposure level indicator compared to when the < >...
Page 187: Long (Bulb) Exposures
Long (Bulb) Exposures In this mode, the shutter stays open as long as you hold down the shutter button completely, and closes when you let go of the shutter button. Use bulb exposures for night scenes, fireworks, astrophotography, and other subjects requiring long exposures. Set the Mode dial to <M>.
Page 188 Caution Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera's internal components. Long bulb exposures produce more noise in the image than usual. ISO 400 is used when the camera is set to ISO Auto.
Page 189: Flash Photography
Flash Photography This chapter describes how to shoot with the built-in flash or an external flash (EL/EX series Speedlites). to the right of titles indicates functions only available in Creative Zone modes (, <Tv>, <Av>, or <M>). Caution Flash photography is not available with [ : Shutter mode] set to [Electronic].
Page 190: Shooting With The Built-In Flash
Shooting with the Built-in Flash Shooting with FE Lock Using the built-in flash is recommended when the [ ] icon appears in the viewfinder or on the screen, when subjects in daytime shots are backlit, or when shooting under low light. Manually raise the flash.
Page 191 In this case, use FE lock. After setting the flash output for the appropriate subject brightness, you can recompose (put the subject toward the side) and shoot. This feature can also be used with a Canon EL/EX series Speedlite. * FE stands for Flash Exposure.
Page 192 Focus on the subject. Press the < > button ( Center the subject on the screen, then press the < > button. A preflash is fired by the flash, and the flash output required for shooting is retained. ] appears briefly on the screen, and [ ] is lit.
Page 193 Caution The [ ] icon blinks when subjects are too far away and your shots would be dark. Approach the subject and repeat steps 2 to 4.
Page 194: Flash Function Settings
Flash Function Settings Flash Firing E-TTL Balance E-TTL II Flash Metering Continuous Flash Control Red-Eye Reduction Slow Synchro Built-in Flash Function Settings External Flash Function Settings External Flash Custom Function Settings Clearing Flash Function Settings/Clearing All Speedlite Custom Functions Functions of the built-in flash or external EL/EX series Speedlites can be set from menu screens on the camera.
Page 195 Select an option. Flash Firing Set to [ ] (in Basic Zone or modes) to have the flash fire automatically, based on shooting conditions. Set to [ ] to have the flash always fire when you shoot. Select [ ] (in Creative Zone modes) to keep the flash off, or if you will use the AF-assist beam.
Page 196 E-TTL Balance You can set your preferred appearance (balance) for flash shots. This setting enables you to adjust the ratio of ambient light to Speedlite light output. Set the balance to [Ambience priority] to lower the proportion of flash output and uses ambient light to produce lifelike shots with a natural mood.
Page 197 E-TTL II Flash Metering Set to [Eval (FacePrty)] for flash metering suitable for shots of people. Set to [Evaluative] for flash metering that emphasizes firing in continuous shooting. If [Average] is set, the flash exposure will be averaged for the entire metered scene. Note Depending on the scene, flash exposure compensation may be necessary.
Page 198 Continuous Flash Control Set to [E-TTL each shot] to perform flash metering for each shot. Set to [E-TTL 1st shot] to perform flash metering for only the first shot before continuous shooting. The flash output level for the first shot is applied to all subsequent shots.
Page 199 Red-Eye Reduction Set to [Enable] to reduce red-eye by firing the red-eye reduction lamp before firing the flash.
Page 200 Slow Synchro You can set the flash-sync speed for flash photography in <Av> or mode. 1/250-30sec. auto ( The flash sync speed is set automatically within a range of 1/250 sec. to 30 sec. to suit the scene's brightness. Slow-sync shooting is used in low-light locations (under some shooting conditions), and shutter speed is automatically lowered.
Page 201 Built-in Flash Function Settings Flash mode • Set to [E-TTL II] to shoot in E-TTL II/E-TTL fully automatic flash mode. • Set to [Manual flash] to specify your preferred flash output in [ flash output].
Page 202 Shutter sync. Normally, set to [1st curtain] so that the flash fires immediately after shooting starts. Set to [2nd curtain] and use low shutter speeds for natural-looking shots of subject motion trails, such as car headlights. Caution When using second-curtain synchronization, set the shutter speed to 1/30 sec. or slower.
Page 203 exp. comp. Set the flash exposure compensation if the brightness of the subject does not come out as desired (so you want to adjust the flash output) in flash photography. Select [ exp. comp.]. Set the compensation amount. To brighten flash exposure, set the compensation amount toward [Brighter] (positive compensation), or to darken it, set toward [Darker] (negative compensation).
Page 204 Note The exposure compensation amount will remain in effect even after you set the power switch to < >.
Page 205 External Flash Function Settings The information displayed on the screen, position of display, and available options vary depending on the Speedlite model, its Custom Function settings, the flash mode, and other factors. Refer to the instruction manual of your flash unit for details on its functions. Sample display Flash mode Wireless functions/...
Page 206 Flash mode You can select the flash mode to suit your desired flash photography. [E-TTL II flash metering] is the standard mode of EL/EX series Speedlites for automatic flash photography. [Manual flash] is for setting the Speedlite's [Flash output level] yourself. [CSP] (Continuous shooting priority mode) is available when using a compatible Speedlite.
Page 207 Wireless functions You can use radio or optical wireless transmission to shoot with wireless multiple-flash lighting. For details on wireless flash, refer to the Instruction Manual of a Speedlite compatible with wireless flash photography. Firing ratio control (RATIO) With a macro flash, you can set the firing ratio control. For details on firing ratio control, refer to the Instruction Manual of the macro flash.
Page 208 Shutter synchronization Normally, set this to [First-curtain synchronization] so that the flash fires immediately after the shooting starts. Set to [Second-curtain synchronization] and use low shutter speeds for natural-looking shots of subject motion trails, such as car headlights. Set to [High-speed synchronization] for flash photography at higher shutter speeds than the maximum flash sync shutter speed.
Page 209 Flash exposure bracketing Speedlites equipped with flash exposure bracketing (FEB) can change the external flash output automatically as three shots are taken at once.
Page 210 External Flash Custom Function Settings For details on the external Speedlite's Custom Functions, refer to the Speedlite's Instruction Manual. Select [External flash C.Fn setting]. Set the desired functions. Select the number. Select an option. Caution With an EL/EX series Speedlite, the Speedlite will always fire at full output if the [Flash metering mode] Custom Function is set to [1:TTL] (autoflash).
Page 211 Clearing Flash Function Settings/C.Fn Settings Select [Clear settings]. Select the settings to be cleared. Select [Clear built-in flash set.], [Clear external flash set.], or [Clear ext. flash C.Fn set.]. Select [OK] on the confirmation screen to clear all flash settings or Custom Function settings.
Page 212: Shooting With Speedlites
Shooting with Speedlites EL/EX Series Speedlites for EOS Cameras Canon Speedlites Other Than the EL/EX Series Non-Canon Flash Units Quick Flash Group Control EL/EX Series Speedlites for EOS Cameras Features of EL/EX series Speedlites (sold separately) can be used in flash photography with the camera.
Page 213 Canon Speedlites Other Than the EL/EX Series With an EZ/E/EG/ML/TL series Speedlite set to A-TTL or TTL autoflash mode, the flash can be fired at full output only. Set the camera's shooting mode to <M> or <Av> and adjust the aperture value before shooting.
Page 214 Non-Canon Flash Units Sync speed The camera can synchronize with non-Canon compact flash units at up to 1/250 sec. With large studio flash units, the flash duration is longer than that of a compact flash unit and varies depending on the model. Before shooting, confirm that flash sync is performed correctly by taking some test shots at a sync speed of approx.
Page 215 Quick Flash Group Control As you view the shooting screen in wireless multi-flash photography, you can configure the settings for each flash group by pressing the button assigned to [Quick flash group control] in [ : Customize buttons]. This example is based on assigning the < >...
Page 216: Shooting And Recording
Shooting and Recording This chapter describes shooting and recording and introduces menu settings on the shooting [ ] tab. • Still Photo Shooting • Movie Recording...
Page 217: Still Photo Shooting
Still Photo Shooting to the right of titles indicates functions only available in Creative Zone modes (, <Tv>, <Av>, or <M>). • Tab Menus: Still Photo Shooting • Image Quality • Still Image Aspect Ratio • Digital Tele-Converter • Auto Exposure Bracketing (AEB) •...
Page 218 • High-Speed Display • Metering Timer • Display Simulation • Optical Viewfinder Simulation • Shooting Information Display • Reverse Display • Viewfinder Display Format • Display Performance • General Still Photo Shooting...
Page 219: Tab Menus: Still Photo Shooting
Tab Menus: Still Photo Shooting Shooting 1 Image quality Still img aspect ratio Digital tele-conv Shooting 2 Expo.comp./AEB ISO speed settings HDR shooting HDR Mode Auto Lighting Optimizer Highlight tone priority Anti-flicker shoot.
Page 220 Shooting 3 Flash control Metering mode Shooting 4 White balance Custom White Balance WB Shift/Bkt. Color space (5) Picture Style • Picture Style Selection • Picture Style Customization • Picture Style Registration Clarity Shooting creative filters...
Page 221 Shooting 5 Lens aberration correction Long exp. noise reduction High ISO speed NR Dust Delete Data Shooting 6 Focus bracketing Drive mode Silent shutter function Shutter mode Release shutter without card...
Page 222 Shooting 7 IS (Image Stabilizer) mode Customize Quick Controls Touch Shutter Image review High speed display Metering timer Shooting 8 Display simulation OVF sim. view assist Shooting info. disp. Reverse display VF display format Disp. performance...
Page 223 Shooting 9 Movie rec. size Sound recording ISO speed settings Auto slow shutter Auto level Shutter btn function for movies...
Page 224 In Basic Zone modes, the following screens are displayed. Shooting 1 Shooting mode Assist Image quality Still img aspect ratio Flash control Shooting 2 Drive mode Release shutter without card...
Page 225 Shooting 3 IS (Image Stabilizer) mode Touch Shutter Image review Shooting info. disp. Reverse display VF display format Disp. performance Shooting 4 Digest type Retain Creative Assist data...
Page 226 Shooting 5 Movie rec. size Sound recording Auto level Shutter btn function for movies...
Page 227: Image Quality
Image Quality RAW Images Guide to Image Quality Settings Maximum Burst for Continuous Shooting You can select the pixel count and the image quality. JPEG/HEIF image quality options are as follows: . For RAW images, you can specify as the image quality. Select [ : Image quality].
Page 228 Note HEIF can be specified when [ : HDR shooting ] is set to [Enable]. You can convert these images to JPEG images after shooting ( is set if you set both RAW and JPEG/HEIF to [ Two versions of each shot are recorded at your specified image quality when you have selected both RAW and JPEG/HEIF.
Page 229 RAW images captured by this camera. If a previous version of DPP Ver. 4.x is installed on your computer, obtain and install the latest version of DPP from the Canon website to update it ( ), which will overwrite the previous version.
Page 230 Guide to Image Quality Settings For details on file size, number of shots available, maximum burst, and other estimated values, see Still photo file size / Number of shots available Maximum burst for continuous shooting [Approx.].
Page 231 Maximum Burst for Continuous Shooting The approximate maximum burst is displayed at the upper left of the shooting screen and lower right of the viewfinder. Note If the maximum burst is displayed as “99”, it indicates that you can shoot 99 or more shots continuously.
Page 232: Still Image Aspect Ratio
Still Image Aspect Ratio You can change the image's aspect ratio. Select [ : Still img aspect ratio]. Set the aspect ratio. Select an aspect ratio. To proceed without changing shooting area display, press the < > button. JPEG images The images will be recorded with the set aspect ratio.
Page 233 RAW Images The images will always be recorded in the [3:2] aspect ratio. The selected aspect ratio information is added to the RAW image file, which enables Digital Photo Professional (EOS software) to generate an image with the same aspect ratio as set at the time of shooting when you process RAW images with this software.
Page 234: Digital Tele-Converter
Digital Tele-Converter Shooting magnification can be increased beyond lens magnification by enlarging the center of the image area. Select [ : Digital tele-conv]. Select a shooting magnification. Shooting magnification is not adjusted when [Off] is selected. Caution Higher shooting magnification results in lower image quality. Not available when RAW image quality is selected.
Page 235: Auto Exposure Bracketing (Aeb)
Auto Exposure Bracketing (AEB) In exposure bracketing, three consecutive images are captured at different exposures within your specified range of up to ±3 stops (in 1/3-stop increments) by automatically adjusting the shutter speed, aperture value, or ISO speed. * AEB stands for Auto Exposure Bracketing. Select [ : Expo.comp./AEB].
Page 236 Take the picture. Standard exposure Decreased exposure Increased exposure Three bracketed shots are taken, according to the specified drive mode, in this sequence: Standard exposure, decreased exposure, and increased exposure. AEB will not be automatically canceled. To cancel AEB, follow step 2 to turn off the AEB range display.
Page 237: Manual Exposure Compensation
Manual Exposure Compensation Exposure compensation can brighten (increased exposure) or darken (decreased exposure) the standard exposure set by the camera. Exposure compensation is available in , <Tv>, <Av>, and <M> modes. For details on exposure compensation when <M> mode and ISO Auto are both set, see Manual Exposure.
Page 238 Note The exposure compensation amount will remain in effect even after you set the power switch to < >.
Page 239: Exposure Lock (Ae Lock)
Exposure Lock (AE Lock) Effect of AE Lock You can lock the exposure when you want to set the focus and exposure separately or when you will take multiple shots at the same exposure setting. Press the < > button to lock the exposure, then recompose and take the picture.
Page 240 Note AE lock is not possible with bulb exposures. Effect of AE Lock AF Point Selection Metering Mode Selection Automatic Selection Manual Selection Exposure centered on the AF point in Exposure centered on the selected AF focus is locked. point is locked. Center-weighted exposure is locked.
Page 241: Iso Speed Settings For Still Photos
ISO Speed Settings for Still Photos Maximum Auto ISO Speed Set the ISO speed (image sensor's sensitivity to light) to suit the ambient light level. In Basic Zone modes, ISO speed is set automatically. For details on ISO speed in movie recording, see ISO Speed in Movie Recording.
Page 242 Note Can also be set on the [ISO speed] screen in [ ISO speed settings]. Setting [ : ISO expansion] to [Enable] ( ) expands the maximum speed to H (equivalent to ISO 51200). Caution Image noise (such as graininess, dots of light, or banding), irregular colors, or color shift may be noticeable at high ISO speeds, in high temperatures, or with long exposures.
Page 243 Maximum Auto ISO Speed For ISO Auto, you can set the maximum ISO speed limit within ISO 400–32000. Select [ ISO speed settings]. Select [Max for Auto]. Select [Max for Auto], then press the < > button. Select the ISO speed. Select an ISO speed, then press the <...
Page 244: Hdr Shooting
HDR Shooting PQ in HDR PQ refers to the gamma curve of the input signal for displaying HDR images. HDR PQ settings enable the camera to produce HDR images conforming to the PQ specification defined in ITU-R BT.2100 and SMPTE ST.2084. (Actual display depends on monitor performance.) Shots are captured as HEIF or RAW images.
Page 245 Caution Some scenes may look different from how they appear on an HDR display device. Unused signal values are roughly indicated by image areas in gray in the histogram when [ : HDR shooting ] is set to [Enable]. : Disp. performance] is not available when [ : HDR shooting ] is set to [Enable].
Page 246: Hdr Mode
HDR Mode You can shoot still photos with clipped highlights and shadows reduced for a high dynamic range of tones even in high-contrast scenes. HDR shooting is effective for landscape and still-life shots. HDR shooting enhances gradation in dark image areas by merging three images deliberately captured at different exposures (standard, underexposed, and overexposed) to produce an HDR image that compensates for loss of detail in dark image areas.
Page 247 Set [Dynamic range]. Selecting [Auto] will have the dynamic range set automatically depending on the image's overall tonal range. The higher the number, the wider the dynamic range will be. To cancel HDR shooting, select [Off] in step 2. Set [Limit max brightness] (only with [ : HDR shooting ] set to [Enable]).
Page 248 Set [Continuous HDR]. With [1 shot only], HDR shooting is canceled automatically after you finish shooting. With [Every shot], HDR shooting continues until the setting in step 2 is set to [Disable HDR]. Set [Auto Image Align]. For handheld shooting, select [Enable]. When using a tripod, select [Disable].
Page 249 Caution Expanded ISO speeds (H) are not available in HDR shooting. The flash will not fire during HDR shooting. RAW image quality cannot be set. AEB is not available. In HDR shooting, three images are captured with settings such as shutter speed automatically adjusted.
Page 250: Auto Lighting Optimizer
Auto Lighting Optimizer Brightness and contrast can be corrected automatically if shots look dark or contrast is too low or high. Select [ : Auto Lighting Optimizer]. Set a correction option. Caution Noise may increase and apparent resolution may change, under some shooting conditions.
Page 251 Note To enable [ : Auto Lighting Optimizer] to be set even in <M> mode, press the < > button in step 2 to clear the checkmark [ ] for [Disable during man expo].
Page 252: Highlight Tone Priority
Highlight Tone Priority You can reduce overexposed, clipped highlights. Select [ : Highlight tone priority]. Set an option. [Enable]: Improves gradation in highlights. The gradation between the grays and highlights becomes smoother. [Enhanced]: Reduces overexposed highlights even more than [Enable], under some shooting conditions. Caution Noise may increase slightly.
Page 253 Note : Highlight tone priority] is set to [Enable] and cannot be changed after you set [ : HDR shooting ] to [Enable] by pressing the < > button to add a checkmark to this setting. : Highlight tone priority] is set to [Disable] when [ HDR Mode] is set to [On], even if you set [ : HDR shooting...
Page 254: Anti-Flicker Shooting
Anti-Flicker Shooting Uneven exposure and color may appear in continuous shooting at fast shutter speeds under flickering light sources such as fluorescent lights, due to uneven vertical exposure. Anti- flicker shooting enables you to take pictures when exposure and colors are less affected by flickering.
Page 255 Caution When [Enable] is set and you shoot under a flickering light source, the shutter- release time lag may become longer. Also, the continuous shooting speed may become slower, and the shooting interval may become irregular. Flicker at a frequency other than 100Hz or 120Hz cannot be detected. Also, if the flickering frequency of the light source changes during continuous shooting, effects of the flicker cannot be reduced.
Page 256: Metering Mode
Metering Mode Four methods (metering modes) to measure the subject's brightness are provided. Normally, evaluative metering is recommended. Evaluative metering is set automatically in Basic Zone modes (except in < > mode, which uses center-weighted average metering). Select [ : Metering mode]. Select an option.
Page 257 : Center-weighted average The metering across the screen is averaged, with the center of the screen weighted more heavily. Caution With (evaluative metering), holding down the shutter button halfway when shooting with [One-Shot AF] locks the exposure value (AE lock). With (partial metering), (spot metering), or...
Page 258: White Balance
White Balance White Balance ] Auto White Balance ] Custom White Balance ] Color Temperature White balance (WB) is for making the white areas look white. Normally, the Auto [ (Ambience priority) or [ ] (White priority) setting will obtain the correct white balance. If natural-looking colors cannot be obtained with Auto, you can select the white balance to match the light source or set it manually by shooting a white object.
Page 259 Note For [ ] and [ ] setting instructions, see ] Auto White Balance. To set your preferred color temperature, select [ ] in [ : White balance], press the [ ] button, then turn the < > dial. (Approx.) Display Mode Color Temperature (K: Kelvin)
Page 260 White Balance The human eye adapts to changes in lighting so that white objects look white under all kinds of lighting. Cameras determine white from the color temperature of lighting and, based on this, apply image processing to make color tones look natural in your shots.
Page 261 ] Auto White Balance With [ ] (Ambience priority), you can slightly increase the intensity of the image's warm color cast when shooting a tungsten-light scene. If you select [ ] (White priority), you can reduce the intensity of the image's warm color cast.
Page 262 Caution Precautions when set to [ ] (White priority) The warm color cast of subjects may fade. When multiple light sources are included in the scene, the warm color cast of the picture may not be reduced. When using flash, the color tone will be the same as with [ ] (Ambience priority).
Page 263 ] Custom White Balance With custom white balance, you can manually set the white balance for the specific light source of the shooting location. Make sure to perform this procedure under the light source at the actual location of the shoot. Registration from an image on a card Shoot a white object.
Page 264 Select [ : Custom White Balance]. Import the white balance data. Use the < >< > keys to select the image captured in step 1, then press the < > button. Select [OK] to import the data. Select [ : White balance]. Select [...
Page 265 Shooting and registering white balances Press the < > button. Select a white balance setting. Press the < >< > keys for selection. Select [Shoot to set WB]. Turn the < > dial to select [ ], then press the < >...
Page 266 Shoot a white object. Aim the camera at a plain white object, so that white fills the screen. Set the camera to manual focus ( ) and shoot so that the white object has standard exposure. The custom white balance is registered to the camera. Caution Correct white balance may not be obtained if the exposure of your image differs greatly from standard exposure.
Page 267 ] Color Temperature A value can be set representing the white balance color temperature. Select [ : White balance]. Select a color temperature. With [ ] selected, press the < > button.
Page 268 Set the color temperature. Turn the < > dial to set a color temperature, then press the < > button. The color temperature can be set from approx. 2500K to 10000K in 100K increments. Note When setting the color temperature for an artificial light source, set the white balance correction (magenta or green bias) as necessary.
Page 269: White Balance Correction
White Balance Correction White Balance Correction White Balance Auto Bracketing You can correct the white balance that is set. This adjustment will have the same effect as using a commercially available color temperature conversion filter or color compensating filter. White Balance Correction Select [ : WB Shift/Bkt.].
Page 270 Set the white balance correction. Sample setting: A2, G1 Press the < > keys to move the [■] mark on the screen to your preferred position. B is for blue, A for amber, M for magenta, and G for green. White balance is corrected in the direction you move the mark.
Page 271 White Balance Auto Bracketing White balance bracketing enables you to capture three images at once with different color tones. Setting the white balance bracketing amount In step 2 for White Balance Correction, when you turn the < > dial, the “■” mark on the screen will change to “■...
Page 272 Note The images will be bracketed in the following sequence: 1. Standard white balance, 2. Blue (B) bias, and 3. Amber (A) bias, or 1. Standard white balance, 2. Magenta (M) bias, and 3. Green (G) bias. You can also set white balance correction and AEB together with white balance bracketing.
Page 273: Color Space
Color Space The range of reproducible colors is called the “color space.” For normal shooting, sRGB is recommended. In Basic Zone, [sRGB] is set automatically. Select [ : Color space]. Set a color space option. Select [sRGB] or [Adobe RGB], then press the < >...
Page 274: Picture Style Selection
Picture Style Selection Picture Style Characteristics Symbols Just by selecting a preset Picture Style, you can obtain image characteristics effectively matching your photographic expression or the subject. Select [ : Picture Style]. Select a Picture Style.
Page 275 Picture Style Characteristics Auto The color tone will be adjusted automatically to suit the scene. The colors will look vivid for blue skies, greenery and sunsets, particularly in nature, outdoor, and sunset scenes. Note If the desired color tone is not obtained with [Auto], use another Picture Style. Standard The image looks vivid, sharp, and crisp.
Page 276 User Def. 1–3 You can add a new style based on presets such as [Portrait] or [Landscape] or a Picture Style file, then adjust it as needed ( ). Shots taken with a style you have not customized yet will have the same characteristics as the default [Auto] setting.
Page 277 Symbols Icons on the Picture Style selection screen represent [Strength], [Fineness], and [Threshold] for [Sharpness] as well as [Contrast] and other parameters. The numbers indicate the values for these settings specified for the respective Picture Style. Sharpness Strength Fineness Threshold Contrast Saturation Color tone...
Page 278: Picture Style Customization
Picture Style Customization Settings and Effects Monochrome Adjustment You can customize any Picture Style by changing it from the default settings. For details on customizing [Monochrome], see Monochrome Adjustment. Select [ : Picture Style]. Select a Picture Style. Select the Picture Style to adjust, then press the < >...
Page 279 Select an option. Select an option, then press the < > button. For details on settings and effects, see Settings and Effects. Set the effect level. Adjust the effect level, then press the < > button. Press the < > button to save the adjusted setting and return to the Picture Style selection screen.
Page 280 Note For movie recording, [Fineness] and [Threshold] for [Sharpness] cannot be set (not displayed). By selecting [Default set.] in step 3, you can restore the parameter settings of the respective Picture Style to the defaults. To shoot with the Picture Style you adjusted, first select the adjusted Picture Style, then shoot.
Page 281 Monochrome Adjustment Filter effect With a filter effect applied to a monochrome image, you can make white clouds or green trees stand out more. Filter Sample Effects Normal black-and-white image with no filter effects. N:None Blue sky will look more natural, and white clouds will look crisper. Ye:Yellow The blue sky will look slightly darker.
Page 282: Picture Style Registration
Picture Style Registration You can select a base Picture Style such as [Portrait] or [Landscape], adjust it as desired, and register it under [User Def. 1] – [User Def. 3]. Useful when creating several Picture Styles with different settings. Picture Styles that you have registered on the camera using EOS Utility (EOS software, can also be modified here.
Page 283 Press the < > button. With [Picture Style] selected, press the < > button. Select a base Picture Style. Select the base Picture Style, then press the < > button. Also select styles this way when adjusting styles registered to the camera with EOS Utility (EOS software).
Page 284 Set the effect level. Adjust the effect level, then press the < > button. For details, see Picture Style Customization. Press the < > button to save the adjusted setting and return to the Picture Style selection screen. The base Picture Style will be indicated on the right of [User Def. *]. Blue style names in [User Def.
Page 285: Clarity
Clarity You can adjust image clarity, as determined by the contrast of image edges. Set toward the negative end to make images look softer or toward the positive end for a sharper appearance. Select [ : Clarity]. Set the effect level. Caution Setting clarity may darken or lighten the areas around boundaries in high-contrast images.
Page 286: Shooting Creative Filters
Shooting Creative Filters Configuring Shooting Creative Filters Characteristics of Shooting Creative Filters You can shoot with filter effects applied. Note that only images with the filter effects applied are saved. Configuring Shooting Creative Filters Select [ : Shooting creative filters]. Caution The camera shoots in single shooting mode when a Creative filter is set, regardless of the drive mode setting (<...
Page 287 Select a filter effect. Turn the < > dial to select a filter effect ( The image is shown with the filter effect applied. Caution Some items on the AF tab are not available with [Fish-eye effect] or [Miniature effect] selected. Adjust the filter effect.
Page 288 Note Different creative filter effects are available in movie recording (...
Page 289 Characteristics of Shooting Creative Filters Grainy B/W Makes the image grainy and black and white. By adjusting the contrast, you can change the black-and-white effect. Soft focus Gives the image a soft look. By adjusting the blur, you can change the degree of softness.
Page 290 Caution With [Grainy B/W], the grainy preview will differ somewhat from the appearance of your shots. With [Soft focus] or [Miniature effect] options, the blurred effect preview may differ somewhat from the appearance of your shots. No histogram is displayed. A magnified view is not available.
Page 291: Lens Aberration Correction
Lens Aberration Correction Peripheral Illumination Correction Distortion Correction Focus Breathing Correction Digital Lens Optimizer Chromatic Aberration Correction Diffraction Correction Vignetting, image distortion, and other issues may be caused by lens optical characteristics. The camera can compensate for these phenomena by using [Lens aberration correction]. Select [ : Lens aberration correction].
Page 292 Select a setting. Confirm that the name of the attached lens and [Correction data available] are displayed. If [Correction data not available] or [ ] is displayed, see Digital Lens Optimizer. Peripheral Illumination Correction Vignetting (dark image corners) can be corrected. Caution Depending on shooting conditions, noise may appear on the image periphery.
Page 293 Distortion Correction Distortion (image warping) can be corrected. Caution Specifying distortion correction may subtly change the angle of view, resulting in images that are cropped a little and seem slightly less sharp. The amount of image cropped may vary between still photos and movies. Note With RF lenses, distortion correction during movie recording is supported.
Page 294 Movies with abrupt changes to the angle of view may be recorded if you move the focusing distance range switch during recording. Correction artifacts may occur, depending on the lens and shooting conditions. For details on lenses compatible with this feature, visit the Canon website (...
Page 295 Digital Lens Optimizer Various aberrations from lens optical characteristics can be corrected, along with diffraction and low-pass filter-induced loss of resolution. If [Correction data not available] or [ ] is displayed by [Digital Lens Optimizer], you can use EOS Utility to add the lens correction data to the camera. For details, refer to the EOS Utility Instruction Manual.
Page 296 Chromatic Aberration Correction Chromatic aberration (color fringing around subjects) can be corrected. Note [Chromatic aberr corr] is not displayed when [Digital Lens Optimizer] is set to [Standard] or [High].
Page 297 General precautions for lens aberration correction Lens aberration correction cannot be applied to existing JPEG/HEIF images. When using a non-Canon lens, setting the corrections to [Disable] is recommended even if [Correction data available] is displayed. Magnifying the periphery of the image may display parts of the image that will not be recorded.
Page 298 Note General notes for lens aberration correction Effects of lens aberration correction vary by lens and shooting conditions. Also, the effect may be difficult to discern depending on the lens used, shooting conditions, etc. If the correction is difficult to discern, magnifying and checking the image after shooting is recommended.
Page 299: Long Exposure Noise Reduction
Long Exposure Noise Reduction Noise such as dots of light or banding that tends to occur in long exposures at shutter speeds of one sec. or slower can be reduced. Select [ : Long exp. noise reduction]. Set a reduction option. Auto For images exposed for 1 sec.
Page 300 Caution With [Auto] or [Enable] set, noise reduction after you shoot may take as long as exposure for the shot. Images may look grainier with the [Enable] setting than with the [Disable] or [Auto] setting. [BUSY] is displayed as noise is reduced, and the shooting screen is not displayed until processing is finished, when you can shoot again.
Page 301: High Iso Speed Noise Reduction
High ISO Speed Noise Reduction You can reduce the image noise generated. This function is especially effective when shooting at high ISO speeds. When shooting at low ISO speeds, the noise in the darker parts of the image (shadow areas) can further be reduced. Select [ : High ISO speed NR].
Page 302 Caution Precautions on Multi Shot Noise Reduction If there is significant misalignment in the image due to camera shake, the noise reduction effect may become smaller. Be careful about camera shake in handheld shots. Using a tripod is recommended. If you shoot a moving subject, the moving subject may leave afterimages. Auto image alignment may not function properly with repetitive patterns (lattice, stripes, etc.) or flat, single-tone images.
Page 303: Dust Delete Data Acquisition
Dust Delete Data Acquisition Preparation Dust Delete Data Appending Dust Delete Data used to erase dust spots can be appended to images. The Dust Delete Data is used by Digital Photo Professional (EOS software) to erase the dust spots automatically. Preparation Use an RF or EF lens.
Page 304 Shoot a plain white object. Shoot with a plain white object (such as a new sheet of white paper) filling the screen, at a distance of 20–30 cm (0.7–1.0 ft.). Since the image will not be saved, the data can still be obtained even if there is no card in the camera.
Page 305 Dust Delete Data Appending The camera will append the Dust Delete Data obtained to all shots from now on. Acquiring Dust Delete Data before shooting is recommended. For details about using Digital Photo Professional (EOS software) to erase dust spots automatically, refer to the Digital Photo Professional Instruction Manual.
Page 306: Focus Bracketing
Focus Bracketing Focus bracketing enables continuous shooting with the focal distance changed automatically after each shot. These images enable you to create a single image in focus over a deep depth of field. Compositing is also possible using an application that supports depth compositing, such as Digital Photo Professional (EOS software).
Page 307 Set [Number of shots]. Specify the number of images captured per shot. Can be set in a range of [2]–[999]. Set [Focus increment]. Specify how much to shift the focus. This amount is automatically adjusted to suit the aperture value at the time of shooting. Larger aperture values increase the focus shift and make focus bracketing cover a wider range under the same focus increment and number of shots.
Page 308 Set [Exposure smoothing]. You can compensate for changes in image brightness during focus bracketing by selecting [Enable], so that the camera makes adjustments based on differences between the displayed and actual aperture value (effective f/number), which varies by focal position. Select [Disable] if you prefer not to compensate for changes in image brightness during focus bracketing.
Page 309 Set [Crop depth comp.]. Select [Enable] for cropping before compositing, to prepare any images without a sufficient angle of view for compositing alignment by cropping them to correct the angle of view. Select [Disable] if you prefer not to crop these images. In this case, areas without a sufficient angle of view are covered by a black border in the saved images.
Page 310 Shooting with a wider angle of view is recommended. After depth compositing, you can crop the image if necessary. For details on lenses compatible with this feature, visit the Canon website ( Suitable [Focus increment] settings vary by subject. An unsuitable [Focus increment] setting may cause unevenness in composite images, or shooting may take more time because more shots are taken.
Page 311: Silent Shutter Function
Silent Shutter Function Disables shutter release sounds, operating sounds, and firing and illumination of the flash and other light sources. The following settings are used and cannot be changed. Anti-flicker shooting: [Disable] Flash firing: [Off] Shooting creative filters: [Off] Long exposure noise reduction: [Disable] Shutter mode: [Electronic] AF-assist beam firing: [Disable] Beep: [Disable]...
Page 312: Shutter Mode
Shutter Mode You can choose the method of shutter release. Select [ : Shutter mode]. Select an option. Elec. 1st-curtain Electronic shutter is used for first curtain and mechanical for the second. Electronic Enables reduced sound and vibration from shutter operations, compared to electronic first-curtain.
Page 313 : Silent shutter function] to [On] sets the shutter mode to [Electronic]. Zooming during continuous shooting may cause changes in exposure even at the same f/number. For details, refer to the Canon website ( Precautions when set to [Elec. 1st-curtain]...
Page 314: Releasing Shutter Without Card
Releasing Shutter without Card You can set the camera not to shoot unless there is a card in the camera. The default setting is [Enable]. Select [ : Release shutter without card]. Select [Disable].
Page 315: Image Stabilizer (Is Mode)
Image Stabilizer (IS Mode) Image stabilization by the lens reduces camera shake at the time of shooting. To activate lens IS when using IS lenses without an IS switch, set [IS mode] to [On] as follows. Note that the [IS mode] setting is not displayed when you are using IS lenses that have an IS switch.
Page 316 Note For details on image stabilization for movie recording, see Movie Digital...
Page 317: Customizing Quick Controls
Customizing Quick Controls Resetting the Custom Quick Control Screen or Clearing All Items Quick Control items and the layout are customizable. Select [ : Customize Quick Controls]. Select [Edit layout].
Page 318 Select items to remove. Use the < > dial or < > keys to select an item to remove, then press the < > button. Items shown on the Quick Control screen are labeled with a checkmark. Items without a checkmark will be removed. Select items to add.
Page 319 Change the layout. Press the < >< > keys to select an item to move, then press the < > button. Press the < >< > keys to move the item, then press the < > button. Press the < >...
Page 320 Review the screen. Press the < > button to check the screen with your settings applied. Resetting the Custom Quick Control Screen or Clearing All Items Select [Reset settings] to restore the default Quick Control screen items and layout. Select [Clear all items] to remove all items from the layout, so that no Quick Control screen is displayed when the <...
Page 321: Shooting With The Touch Shutter
Shooting with the Touch Shutter Just by tapping the screen, you can focus and take the picture automatically. Enable the Touch Shutter. Tap [ ] on the screen. Each time you tap the icon, it will toggle between [ ] and [ ] (Touch Shutter: Enable) The camera will focus on the spot you tap, then the picture will be taken.
Page 322 Caution The camera shoots in single shooting mode regardless of the drive mode setting ], [ ], or [ Tapping the screen focuses with [One-Shot AF], even if [ : AF operation] is set to [Servo AF]. Tapping the screen in magnified view will not focus or take the picture. When shooting by tapping with [Review duration] in [ : Image review] set to [Hold], you can take the next shot by pressing the shutter button halfway or tapping...
Page 323: Image Review
Image Review Review Duration Viewfinder Display Review Duration To keep the image displayed immediately after you shoot, set to [Hold], and if you prefer not to have the image displayed, set to [Off]. Select [ : Image review]. Select [Review duration]. Set a time option.
Page 324 Note When [Hold] is set, images are displayed as long as the time set in the [Screen off] option of [ : Power saving].
Page 325 Viewfinder Display Set to [Enable] for viewfinder display of your shots immediately after you shoot. Select [ : Image review]. Select [Viewfinder display]. Select an option. Note [Viewfinder display] settings take effect when [Review duration] is set to an option other than [Off].
Page 326: High-Speed Display
High-Speed Display High-speed display that switches between each shot and the live image is available when shooting in [ ] (high-speed continuous shooting) drive mode and in a shutter mode other than electronic shutter. Select [ High speed display]. Select an option. Select [Enable] for display that switches between each shot and the live image.
Page 327 Caution Images may waver or flicker during high-speed display. This occurs more often at high shutter speeds. However, this does not affect shooting results. High-speed display is not performed for shutter speeds slower than 1/30 sec., aperture values higher than f/11, conditions that make autofocusing difficult, flash photography, or high ISO expansion.
Page 328: Metering Timer
Metering Timer You can set how long the metering timer runs (which determines the duration of exposure value display) after it is triggered automatically by an action such as pressing the shutter button halfway. Select [ : Metering timer]. Set a time option.
Page 329: Display Simulation
Display Simulation With display simulation, display of image brightness and depth of field more closely matches the actual brightness (exposure) of your shots. Select [ : Display simulation]. Select an option. Exposure+DOF ( Image brightness and depth of field as displayed closely matches the actual brightness (exposure) of your shots.
Page 330 Disable ( The image is displayed at standard brightness, so it is easy to see. Even if you set exposure compensation, the image is displayed at the standard brightness. Caution Notes on [Exposure+DOF] Display may flicker at some shutter speeds. With EF lenses, this setting may increase the shutter-release time lag.
Page 331: Optical Viewfinder Simulation
Optical Viewfinder Simulation Natural-looking viewfinder and screen display, resembling the view from an optical viewfinder, is available in still photo shooting. Note that images displayed with this feature set to [On] may differ from actual shooting results. Select [ : OVF sim. view assist]. Select an option.
Page 332 Caution Setting this feature to [On] sets [ : Display simulation] to [Disable]. Optical viewfinder simulation is used for display when this feature is set to [On] in HDR shooting. Creative filter display is used when shooting with Creative filters, even if this feature set to [On].
Page 333: Shooting Information Display
Shooting Information Display Customizing Information on the Screen Customizing Information in the Viewfinder Viewfinder Vertical Display Grid Histogram Lens Information Display Clearing Settings You can customize the details and screens of information shown on the screen or in the viewfinder when you shoot. Customizing Information on the Screen Select [ : Shooting info.
Page 334 Select [Screen info. settings]. Select screens. Press the < >< > keys to select screens of information to show on the camera. For information you prefer not to display, press the < > button to clear the checkmark [ ]. To edit the screen, press the <...
Page 335 Edit the screen. Press the < >< > keys to select options to show on the information screen. For items you prefer not to display, press the < > button to clear the checkmark [ ]. Select [OK] to register the setting.
Page 336 Customizing Information in the Viewfinder Select [ : Shooting info. disp.]. Select [VF info/toggle settings]. Select screens. Press the < >< > keys to select screens of information to show on the camera. For information you prefer not to display, press the < >...
Page 337 Edit the screen. Press the < >< > keys to select options to show on the information screen. For items you prefer not to display, press the < > button to clear the checkmark [ ]. Select [OK] to register the setting.
Page 338 Viewfinder Vertical Display You can select how viewfinder information is displayed when you are shooting still photos vertically. Select [ : Shooting info. disp.]. Select [VF vertical display].
Page 339 Select an option. Information is automatically rotated, making it easier to read. Information is not automatically rotated.
Page 340 Grid A grid can be displayed on the screen and viewfinder. Select [ : Shooting info. disp.]. Select [Grid display]. Select an option.
Page 341 Histogram You can select the content and display size of the histogram. Select [ : Shooting info. disp.]. Select [Histogram disp]. Select an option. Select the content ([Brightness] or [RGB]) and display size ([Large] or [Small]).
Page 342 Lens Information Display You can display information about the lens in use. Select [ : Shooting info. disp.]. Select [Lens info display].
Page 343 Select an option. Focus distance disp You can display focus distance when using RF lenses. In focus distance display, you can select the timing and unit of measurement. Focal length disp You can display the focal length of the lens in use. SA variable amount You can display the amount of correction set when using lenses featuring spherical aberration control.
Page 344 Clearing Settings Select [ : Shooting info. disp.]. Select [Reset]. Select [OK].
Page 345: Reverse Display
Reverse Display A mirror image can be displayed when you shoot with the screen rotated toward the subject (toward the front of the camera). Select [ : Reverse display]. Select [On]. Select [Off] if you prefer not to reverse display when the screen is facing the subject.
Page 346: Viewfinder Display Format
Viewfinder Display Format You can select how information is presented in the viewfinder. Select [ : VF display format]. Select an option.
Page 347: Display Performance
Display Performance You can select the performance parameter to prioritize in shooting screen display for still photos. Select [ : Disp. performance]. Select an option. When set to [Smooth] By pressing the < > button to add a checkmark, you can include low-light locations in the scenarios for suppressing lower display frame rates.
Page 348 Caution Some shooting conditions and camera operations may prevent smooth, high frame rate display, even when set to [Smooth]. Shooting under low light with [Suppress lower frame rate] set for shooting screen display may affect performance as follows. • Faster battery consumption •...
Page 349: General Still Photo Shooting
General Still Photo Shooting Information Display General Still Photo Shooting Precautions Information Display For details on the icons displayed for still photo shooting, see Information Display. Note White display of the [ ] icon indicates that your shots will be about as bright as the image displayed.
Page 350 General Still Photo Shooting Precautions Caution Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera's internal components. Image quality When you shoot at high ISO speeds, noise (such as dots of light and banding) may become noticeable.
Page 351 Images and display Under low- or bright-light conditions, the displayed image may not reflect the brightness of the captured image. Although noise may be noticeable in images under low light (even at low ISO speeds), there will be less noise in your shots, due to differences in image quality between displayed and captured images.
Page 352: Movie Recording
Movie Recording For movie recording, set the Mode dial to < >. Caution When switching from still photo shooting to movie recording, check the camera settings again before recording movies. Note You can record movies by pressing the movie shooting button during still photo shooting.
Page 353: Tab Menus: Movie Recording
Tab Menus: Movie Recording Shooting 1 Shooting mode Movie rec. size High Frame Rate Digital zoom Sound recording Shooting 2 Exposure comp. ISO speed settings HDR shooting Auto Lighting Optimizer Highlight tone priority Av 1/8-stop incr. Auto slow shutter...
Page 354 Shooting 3 White balance Custom White Balance WB correction (4) Picture Style • Picture Style Selection • Picture Style Customization • Picture Style Registration Clarity Shooting creative filters Lens aberration correction Shooting 4 Time-lapse movie Movie self-timer...
Page 355 Shooting 5 IS (Image Stabilizer) mode Customize Quick Controls Auto level Shutter btn function for movies Metering timer Zebra settings Shooting info. disp. Shooting 6 Reverse display VF display format Standby: Low res. HDMI display Time code...
Page 356 In < >, < >, and < > modes, the following screens are displayed. Shooting 1 Shooting mode Movie rec. size Sound recording Movie self-timer Shooting 2 IS (Image Stabilizer) mode Auto level Shutter btn function for movies Shooting info. disp. Reverse display VF display format...
Page 357 Shooting 3 Standby: Low res. Time code...
Page 358: Movie Recording
Movie Recording Autoexposure Movie Recording ISO Speed in [ ] Mode Manual Exposure Movie Recording ISO Speed in [ ] Mode Shutter Speed Close-Up Demo Movie Recording IS Mode Movie Recording HDR Movie Recording Custom Shooting Mode Still Photo Shooting Information Display (Movie Recording) Autoexposure Movie Recording Exposure is controlled automatically to suit the brightness.
Page 359 Select [ : Shooting mode]. Select [Movie auto exposure]. Focus on the subject. Before recording a movie, focus with AF ( ) or manual focus ( By default, [ : Movie Servo AF] is set to [Enable] so that the camera always keeps focusing ( When you press the shutter button halfway, the camera focuses using your specified AF area.
Page 360 Record the movie. Press the movie shooting button to start recording a movie. You can also start recording a movie by tapping [ ] on the screen. REC] (1) is displayed in the upper right while movie recording is in progress, and a red frame around the screen blinks.
Page 361 ISO Speed in [ ] Mode ISO speed is set automatically. See ISO Speed in Movie Recording.
Page 362 Manual Exposure Movie Recording You can manually set the shutter speed, aperture value, and ISO speed for movie recording. Set the Mode dial to < >. Select [ : Shooting mode]. Select [Movie manual exp.].
Page 363 Set the shutter speed, aperture value, and ISO speed. Press the shutter button halfway and check the exposure level indicator. Press the < > key to select shutter speed, aperture value, exposure level, or ISO speed, then turn the < >...
Page 364 Note When ISO Auto is set, you can press the < > button to lock the ISO speed. After locking during movie recording, ISO speed lock can be canceled by pressing the < > button again. If you press the < >...
Page 365 ISO Speed in [ ] Mode You can set the ISO speed manually or select [ ] to set it automatically. For details on ISO speed, see ISO Speed in Movie Recording.
Page 366 Shutter Speed Available shutter speeds in [ ] mode vary depending on the frame rate you have set for your specified movie recording size. Shutter Speed (Sec.) Frame Rate Normal Movie Recording High Frame Rate Movie Recording 1/4000–1/125 – 1/4000–1/100 1/4000–1/8 –...
Page 367 Close-Up Demo Movie Recording Subjects near the camera can be given priority for focusing. This is useful for demonstrations, product reviews, or similar situations. Set the Mode dial to < >. Select [ : Shooting mode]. Select [Movie for close-up demos]. Record the close-up demo movie.
Page 368 IS Mode Movie Recording You can reduce camera shake as movies are recorded. This can provide effective stabilization even when non-IS lenses are used. When using an IS lens, set the Image Stabilizer switch to < >. Set the Mode dial to < >.
Page 369 Select a stabilization option. Press the < > button. Off ( ): Deactivates image stabilization. Movies are recorded with a normal angle of view. On ( ): Activates image stabilization. The image will be slightly magnified. Enhanced ( ): Activates stronger image stabilization than for [On]. The image will be more magnified.
Page 370 HDR Movie Recording You can record high dynamic range movies that retain detail in highlights of high-contrast scenes. Note Movies are recorded at (NTSC) or (PAL). Set the Mode dial to < >. Select [ : Shooting mode]. Select [ HDR Movie].
Page 371 Caution Since multiple frames are merged to create an HDR movie, certain parts of the movie may look distorted. This is more noticeable in handheld recording affected by camera shake, so consider using a tripod. Note that even if a tripod is used for recording, afterimages or noise may become more noticeable, compared to normal playback, when the HDR movie is played back frame-by-frame or in slow motion.
Page 372 Custom Shooting Mode You can record using the settings registered to [ : Custom shooting mode (C mode)] By default, [Movie auto exposure] recording is used. Set the Mode dial to < >. Select [ : Shooting mode]. Select [ ] or [ ] is displayed when [Movie auto exposure] is registered to [Custom shooting mode (C mode)], and [...
Page 373 Still Photo Shooting Still photo shooting is not supported in movie recording mode. To shoot still photos, turn the Mode dial to switch to another shooting mode.
Page 374 Information Display (Movie Recording) For details on the icons on the movie recording screen, see Information Display. Caution The remaining time displayed for movie recording is only a guideline. Movie recording may stop before the initially displayed recording time elapses if the red [ ] icon appears due to high internal camera temperature during recording (...
Page 375: Movie Recording Size
Movie Recording Size 4K Movie Recording Image Area Cards That Can Record Movies Movie Files Exceeding 4 GB Total Movie Recording Time and File Size Per Minute Movie Recording Time Limit You can set the recording size, frame rate, and compression method in [ : Movie rec.
Page 376 Note To obtain better performance with the card, formatting the card with the camera before recording movies is recommended ( Movies cannot be recorded in HD or VGA quality. 4K Movie Recording Recording 4K movies requires a stable card with a fast writing speed. For details, see Cards That Can Record Movies.
Page 377 Image Area The movie image area varies depending on the movie recording size setting. (3840×2160) / (1920×1080) Caution Recording with Movie digital IS ( ) further crops the image around the center of the screen.
Page 378 Frame rate (fps: frames per second) ] 119.9 fps/[ ] 59.94 fps/[ ] 29.97 fps For areas where the TV system is NTSC (North America, Japan, South Korea, Mexico, etc.). For [ ], see High Frame Rate. ] 100.00 fps/[ ] 50.00 fps/[ ] 25.00 fps For areas where the TV system is PAL (Europe, Russia, China, Australia, etc.).
Page 379 Cards That Can Record Movies Card performance requirements for details on cards supporting all movie recording sizes. Test cards by recording a few movies to make sure they can record correctly at your specified size ( Caution Before recording 4K movies, format cards by selecting [Low level format] in [ : Format card] ( If you use a slow-writing card when recording movies, the movie may not be recorded properly.
Page 380 Movie Files Exceeding 4 GB Using SDHC cards formatted with the camera If you use the camera to format an SDHC card, the camera will format it in FAT32. With a FAT32-formatted card, if you record a movie and the file size exceeds 4 GB, a new movie file will be created automatically.
Page 381 Total Movie Recording Time and File Size Per Minute For details, see Movie recording.
Page 382 Movie Recording Time Limit When recording non-High Frame Rate movies The maximum recording time per movie is 1 hr. Once 1 hr. is reached, recording stops automatically. You can start recording a movie again by pressing the movie shooting button (which records the movie as a new file). When recording High Frame Rate movies The maximum recording time per movie is 15 min.
Page 383: High Frame Rate
High Frame Rate You can record movies at a high frame rate of 119.9 fps or 100.0 fps. This is ideal for recording movies that will be played back in slow motion. Note that the maximum recording time per movie is 15 min. Movies are recorded in ) or ) quality.
Page 384: Digital Zoom
Digital Zoom With the recording size set to [ ] (NTSC) or [ ] (PAL), you can shoot with approx. 1–10× digital zoom. Select [ : Digital zoom]. Select an option. Select [Enable], then press the < > button. Press the < >...
Page 385 Use digital zoom. Tap [ ] in the lower right. The digital zoom bar will appear. Tap [▲T] or press the < > key to zoom in, and tap [▼W] or press the < > key to zoom out. Pressing the shutter button halfway focuses with [1-point AF] (fixed at center).
Page 386: Sound Recording
Sound Recording Sound Recording/Sound-Recording Level Wind Filter You can record movies while recording sound with the built-in stereo microphone or an external stereo microphone. You can also freely adjust the sound-recording level. Use [ : Sound recording] to set sound recording functions. Caution Sounds from Wi-Fi operations may be captured with built-in or external microphones.
Page 387 Note In Basic Zone modes, the settings available for [ : Sound recording] are [On] and [Disable]. Set to [On] for automatic adjustment of the recording level. Audio is also output when the camera is connected to televisions via HDMI, unless [Sound recording] is set to [Off].
Page 388 Wind Filter Set to [Auto] to reduce audio distortion in windy outdoor scenes. Disabled when external microphones are connected to the external microphone IN terminal. When the wind filter function takes effect, part of the low bass sounds will also be reduced.
Page 389: Shooting Creative Filters
Shooting Creative Filters Creative Filter Characteristics You can record movies with one of five filter effects applied: Dream, Old movies, Memory, Dramatic B&W, or Miniature effect movie. Recording size can be set to (NTSC) or (PAL). Select [ : Shooting creative filters]. Select a filter effect.
Page 390 Adjust the filter effect level. Press the < > button. Turn the < > dial to select a filter effect level, then press the < > button. When setting up miniature effect movies, select the playback speed. Take the picture. Caution A magnified view is not available.
Page 391 Creative Filter Characteristics Dream Applies a soft, dreamy, otherworldly appearance. Gives the movie a soft look overall, blurring the periphery of the screen. You can adjust the blurry areas along the screen edges. Old movies Creates an atmosphere like an old film by adding wavering, scratches, and flickering effects to the image.
Page 392 Caution ] (Miniature effect movies) Sound is not recorded. Movie Servo AF is disabled. Editing is not available for miniature effect movies with a playback time less than 1 sec. (...
Page 393: Time-Lapse Movies
Time-Lapse Movies Approx. Time Available for Recording Time-Lapse Movies Still photos captured at your specified interval can be automatically combined to create a Full HD time-lapse movie. A time-lapse movie shows how a subject changes in a much shorter period of time than the actual time it took. It is effective for a fixed-point observation of changing scenery, growing plants, celestial motion, etc.
Page 394 Select a scene. Select a scene to suit the shooting situation. For greater freedom when setting the shooting interval and number of shots manually, select [Custom]. Set the shooting interval. Select [Interval/shots]. Select [Interval] (sec.). Use the < >< > keys to set a value, then press the <...
Page 395 Set the number of shots. Select [No. of shots]. Use the < >< > keys to set a value, then press the < > button. Refer to [ : Time required] and [ : Playback time] as you set the number.
Page 396 Set [Auto exposure]. Fixed 1st frame When taking the first shot, metering is performed to set the exposure automatically to match the brightness. The exposure setting for the first shot will be applied to subsequent shots. Other shooting-related settings for the first shot will also be applied for subsequent shots. Each frame Metering is also performed for each subsequent shot to set the exposure automatically to match the brightness.
Page 397 Set [Screen auto off]. Disable Even during time-lapse movie recording, the image will be displayed. (The screen turns off only at the time of shooting.) Note that the screen will turn off when approx. 30 min. elapse after the shooting started. Enable Note that the screen will turn off when approx.
Page 398 Set [Beep per taken]. Set to [0] to prevent the camera from beeping for each shot. Check the settings. Time required (1) Indicates the time required to shoot the set number of shots with the set interval. If it exceeds 24 hours, “*** days” will be displayed. Playback time (2) Indicates the movie recording time (equivalent to the time required for playback) once the Full HD movie is created from still photos taken at...
Page 399 Read the message. Read the message and select [OK].
Page 400 Take a test shot. Press the < > button and double-check the Time required (1) and Interval (2) shown on the screen. As in still photo shooting, set the exposure and shooting functions, then press the shutter button halfway to focus. Press the shutter button completely to take a test shot, which is recorded to the card as a still photo.
Page 401 Press the movie shooting button. The camera is now ready to start recording a time-lapse movie. To return to step 12, press the movie shooting button again. Record the time-lapse movie. Press the shutter button completely to start recording the time- lapse movie.
Page 402 Note Using a tripod is recommended. Taking test shots as in step 12 and recording test movies for time-lapse movies beforehand is recommended. Field of view (coverage) is approx. 100%. To cancel time-lapse movie recording in progress, either press the shutter button completely or press the movie shooting button.
Page 403 Caution Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera's internal components. Time-lapse movies cannot be recorded when the camera is connected to a computer with the interface cable, or when an HDMI cable is connected.
Page 404 Image stabilization is not applied in time-lapse movie recording. Time-lapse movie shooting ends if the power switch is set to < >, for example, and the setting is changed to [Disable]. Even if a flash is used, it will not fire. The following operations cancel standby for time-lapse movie recording and switch the setting to [Disable].
Page 405: Movie Self-Timer
Movie Self-Timer Movie recording can be started by the self-timer. Select [ : Movie self-timer]. Select an option. Record the movie. After you press the movie shooting button or tap [ ], the camera displays the number of seconds left before recording and beeps. Note To cancel the self-timer, either tap the screen or press the <...
Page 406: Image Stabilizer (Is Mode)
Image Stabilizer (IS Mode) Movie Digital IS Movie digital IS reduces camera shake as movies are recorded. This can provide effective stabilization even when non-IS lenses are used. When using an IS lens, set the Image Stabilizer switch to < >.
Page 407 Enhanced ( Compared to when [On] is set, stronger camera shake can be corrected. The image will be more magnified. Caution Movie digital IS will not function when the lens's optical Image Stabilizer switch is set to < >. Stabilization by Movie digital IS may be less effective at some movie recording sizes.
Page 408: Auto Level
Auto Level Auto leveling helps keep movies straight during recording. Caution Set [ Digital IS] in [ : IS (Image Stabilizer) mode] to [Off]. Select [ Auto level]. Select an option.
Page 409: Shutter Button Function For Movies
Shutter Button Function for Movies You can set the functions performed by pressing the shutter button halfway or completely during movie recording. Select [ : Shutter btn function for movies].
Page 410 Select an option. Half-press Specify the function performed by pressing the shutter button halfway. Fully-press Specify the function performed by pressing the shutter button completely. With [Fully-press] set to [Start/stop mov rec], you can start/stop movie recording not only with the movie shooting button but also by pressing the shutter button completely, or by using Wireless Remote Control BR-E1 (sold separately).
Page 411: Zebra Settings
Zebra Settings To help you adjust exposure before or during movie recording, you can display a striped pattern over or around image areas of a specified brightness. Select [ : Zebra settings]. Select [Zebra]. Select [On].
Page 412 Select [Zebra pattern]. [Zebra 1]: Displays left-slanting stripes around areas of the specified brightness. [Zebra 2]: Displays right-slanting stripes over areas that exceed the specified brightness. [Zebra 1+2]: Displays both [Zebra 1] and [Zebra 2]. [Zebra 1] display takes precedence where [Zebra 1] and [Zebra 2] display areas overlap.
Page 413 Note The maximum brightness value does not reach 100% when HDR-PQ is set. Note that the maximum brightness value varies depending on [ : Highlight tone priority] and [ : Picture Style] settings. Checking the zebra display level in advance is recommended when you will set [Zebra pattern].
Page 414: Shooting Information Display
Shooting Information Display Recording Emphasis Aspect Marker You can customize the details and screens of information shown on the screen or in the viewfinder during movie recording. Note For details on the following topics, see Shooting Information Display Still Photo Shooting.
Page 415 Recording Emphasis Select [ : Shooting info. disp.]. Select [Recording emphasis]. Select an option. A red frame around the screen blinks while movie recording is in progress. No frame is displayed to call attention to recording in progress.
Page 416 Aspect Marker If you will change the image aspect ratio when editing the recorded movie, you can display aspect markers on the movie recording screen (during standby and recording) to be aware of the final angle of view after editing. Select [ : Shooting info.
Page 417 Note Markers are not shown during movie playback (recorded movies are not tagged with aspect marker information).
Page 418: Time Code
Time Code Count Up Start Time Setting Movie Recording Count Movie Play Count HDMI Drop Frame Time codes record the time automatically as movies are recorded. Time codes always record elapsed hours, minutes, seconds, and frames. They are mainly used when movies are edited.
Page 419 Count Up Rec run The time code advances only during movie recording. Time codes in each movie file recorded continue from the last time code in the previous file. Free run The time code keeps advancing, even when you are not recording. Caution When set to [Free run], time codes are not added to High Frame Rate movies.
Page 420 Start Time Setting You can set the initial time of the time code. Manual input setting Enables you to set any starting hour, minute, second, and frame. Reset Resets the time set with [Manual input setting] or [Set to camera time] to “00:00:00.” or “00:00:00:”...
Page 421 Movie Recording Count You can select how time is displayed on the movie recording screen. Rec time During recording standby, displays the available recording time. During recording, displays the time that has elapsed since movie recording began (1). Time code Displays the time code during movie recording (2).
Page 422 Movie Play Count You can select how time is displayed on the movie playback screen. Rec time Displays the recording or playback time during movie playback. Time code Displays the time code during movie playback. Note Time codes are always recorded to movie files (except when High Frame Rate movies are set to [Free run]), regardless of the [Movie rec count] setting.
Page 423 HDMI Time code Time codes can be added to movies as you record them to an external device via HDMI. • Off No time code is added to HDMI video output. • On Time codes are added to HDMI video output. When [On] is set, [Rec Command] is displayed.
Page 424 Drop Frame The time code's frame count will cause a discrepancy between the actual time and the time code if the frame rate is set to (119.9 fps), (59.94 fps), or (29.97 fps). The discrepancy is corrected automatically when [Enable] is set. Enable Corrects the discrepancy automatically by skipping time code numbers (DF: drop frame).
Page 425: Other Menu Functions
Other Menu Functions Exposure comp. Exposure compensation can be adjusted in a range of ±3 stops, in 1/3-stop increments. For details on exposure compensation, see Manual Exposure Compensation. ISO speed settings • ISO speed In [ ] mode, you can set the ISO speed manually. You can also select ISO Auto. •...
Page 426 Highlight tone priority You can reduce overexposed, clipped highlights as you record movies. For details on Highlight tone priority, see Highlight Tone Priority. Av 1/8-stop incr. • You can set aperture values on a finer scale when recording movies with an RF lens.
Page 427 Note Setting to [Disable] is recommended when recording moving subjects under low light, or when afterimages such as trails may occur.
Page 428 White balance For details on white balance, see White Balance. Custom White Balance For details on custom white balance, see Custom White Balance. WB correction For details on white balance correction, see White Balance Correction. Picture Style For details on Picture Styles, see Picture Style Selection.
Page 429 Customize Quick Controls For details on customizing Quick Controls, see Customizing Quick Controls. Metering timer For details on the metering timer, see Metering Timer.
Page 430 Reverse display For details on reverse display, see Reverse Display. VF display format For details on the viewfinder display format, see Viewfinder Display Format. Standby: Low res. Set to [On] to conserve battery power and control the rise of camera temperature during standby.
Page 431 HDMI display You can specify how movies are displayed as they are recorded via HDMI to an external device. Movie output itself corresponds to the [Movie rec. size] setting. The default setting is [ • Enables movie display both on the camera screen and on the other device, via HDMI output.
Page 432 Caution HDMI output without information prevents display of warnings about the card space, battery level, or high internal temperature ( ) via HDMI. During HDMI output, display of the next image may take some time if you switch between movies of different recording sizes or frame rates. Avoid operating the camera when recording movies to external devices, which may cause information to be displayed in the HDMI video output.
Page 433: General Movie Recording Precautions
General Movie Recording Precautions Guidance Display Before Recording Warning Indicator Display in Movie Recording Guidance Display Before Recording Guidance may be displayed when the camera starts up, after settings are adjusted, or in other situations. The guidance warns that the camera may become hot internally if movies are recorded under the current settings, and that if you continue recording, the camera may turn off automatically.
Page 434 Warning Indicator Display in Movie Recording A 10-level indicator (1) is displayed during movie recording in case of excessive internal camera temperature. As the internal temperature rises, the level on the indicator extends to the right. How fast the level increases will depend on shooting conditions. Levels 1–7 are marked in white, but once the temperature reaches level 8, the color changes.
Page 435 Caution Precautions for movie recording Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera's internal components. If you record something that has fine detail, moire or false colors may result. If [ ] or [ ] is set and the ISO speed or aperture value changes during...
Page 436 If you use a card with a slow writing speed, an indicator may appear on the right of the screen during movie recording. The indicator shows how much data has not yet been written to the card (remaining capacity of the internal buffer memory), and it increases more quickly the slower the card is.
Page 437: Af/Drive
AF/Drive This chapter describes autofocus operation and drive modes and introduces menu settings on the AF [ ] tab. to the right of titles indicates functions only available in Creative Zone modes (, <Tv>, <Av>, or <M>). Note < > stands for autofocus. < >...
Page 438: Tab Menus: Af (Still Photos)
Tab Menus: AF (Still Photos) AF operation AF area Whole area tracking Servo AF Subject to detect Eye detection Focus mode Note When lenses without a focus mode switch are used, [Focus mode] is displayed on the [ 1] tab. Preview AF AF-assist beam firing...
Page 439 Touch & drag AF settings MF peaking settings Focus guide Movie Servo AF Lens electronic MF Focus/control ring...
Page 440 In Basic Zone modes, the following screens are displayed. Note that available menus vary by shooting mode. AF area Whole area tracking Servo AF Subject to detect Eye detection Focus mode Note When lenses without a focus mode switch are used, [Focus mode] is displayed on the [ 1] tab.
Page 441 Touch & drag AF settings MF peaking settings Focus guide Movie Servo AF...
Page 442: Tab Menus: Af (Movie Recording)
Tab Menus: AF (Movie Recording) Movie Servo AF AF area Subject to detect Eye detection Focus mode Note When lenses without a focus mode switch are used, [Focus mode] is displayed on the [ 1] tab. Movie Servo AF speed Touch &...
Page 443 Lens electronic MF Focus/control ring...
Page 444: Af Operation
AF Operation One-Shot AF for Still Subjects Servo AF for Moving Subjects AI Focus AF for Automatic AF Mode Switching You can select the AF operation characteristics to suit the shooting conditions or subject. Set the focus mode to AF. For RF lenses without a focus mode switch Set [ : Focus mode] to [AF].
Page 445 Select [ : AF operation]. Select an option. Note If focus is not achieved, the AF point will turn orange. When using One-Shot AF, either recompose the shot and try to focus again or see Shooting Conditions That Make Focusing Difficult.
Page 446 One-Shot AF for Still Subjects This AF operation is suited for still subjects. When you press the shutter button halfway, the camera will focus only once. When focus is achieved, the AF point will turn green and the beeper will sound. The focus remains locked while you hold down the shutter button halfway, allowing you to recompose the image before taking the picture.
Page 447 After the AF point in focus turns green, keep the shutter button pressed halfway and recompose the shot. Press the shutter button completely to take the picture.
Page 448 Servo AF for Moving Subjects This AF operation is suited for moving subjects. While you hold down the shutter button halfway, the camera will keep focusing on the subject continuously. When focus is achieved, the AF point will turn blue. The beeper will not sound even when focus is achieved.
Page 449 AI Focus AF for Automatic AF Mode Switching The AF mode is automatically switched from [One-Shot AF] to [Servo AF] based on subject status while you are pressing the shutter button halfway or shooting continuously.
Page 450: Movie Servo Af
Movie Servo AF With this function enabled, the camera focuses on the subject continuously during movie recording. Set the Mode dial to < >. Select [ : Movie Servo AF].
Page 451 Select [Enable]. Enable • The camera focuses on the subject continuously even when you are not pressing the shutter button halfway. • To keep the focus at a specific position, or if you prefer not to record mechanical sounds from the lens, you can temporarily stop Movie Servo AF by tapping [ ] in the lower left of the screen.
Page 452 Caution Precautions when set to [Movie Servo AF: Enable] Shooting conditions that make focusing difficult • A fast-moving subject approaching or moving away from the camera. • A subject moving at a close distance to the camera. • When shooting with a higher aperture value. •...
Page 453: Selecting The Af Area
Selecting the AF Area AF Area Selecting the AF Area Whole Area Tracking Servo AF Subject to Detect Eye Detection Tracking with the Button Focus Mode Manually Setting AF Points or Zone AF Frames Magnified View AF Shooting Tips Shooting Conditions That Make Focusing Difficult AF Range...
Page 454 AF Area Camera operation in the AF area is as follows. : Spot AF The camera focuses in a narrower area than 1-point AF. : 1-point AF The camera focuses using a single AF point [...
Page 455 : Expand AF area: Focuses using one AF point [ ] and the AF area outlined here in blue. Effective for moving subjects, which are difficult to track with 1-point AF. Focusing on your preferred subject is easier than with Flexible Zone AF. When Servo AF is used, first you will focus using an AF point [ : Expand AF area: Around Focuses using one AF point [...
Page 456 : Flexible Zone AF 1 By default, a square Zone AF frame is set. : Flexible Zone AF 2 By default, a vertical rectangular Zone AF frame is set.
Page 457 : Flexible Zone AF 3 By default, a horizontal rectangular Zone AF frame is set. With Flexible Zone AF 1–3, you can freely set the size of the Zone AF frame ( Uses auto selection AF in Zone AF frames to cover a larger area than Expand AF area, which makes focusing easier than with 1-point AF/Expand AF area and effective for moving subjects.
Page 458 Selecting the AF Area You can select the AF area to suit the shooting conditions or subject. If you prefer to focus manually, see Manual Focus. Select [ : AF area]. Select the AF area. Note To set the AF area, you can also press the < >...
Page 459 Whole Area Tracking Servo AF You can set whether to switch to whole-area subject tracking during Servo AF (while the shutter button is pressed halfway with [ : AF operation] set to [Servo AF]). Select [ : Whole area tracking Servo AF]. Select an option.
Page 460 Subject to Detect You can specify conditions for automatic selection of the main subject to track. Auto Automatic selection of the main subject to track from any people, animals, or vehicles in the scene. People Prioritizes the faces or heads of people as the main subjects to track. When a person's face or head cannot be detected, the camera attempts to detect and track their torso.
Page 461 Caution The following kinds of subjects may not be detected. Also, the subject's left or right eye may not be prioritized correctly. • Extremely small or large • Too bright or dark • Partially hidden • Difficult to distinguish from the background •...
Page 462 Manually selecting a subject for focus Check the tracking frame. Aim the camera at the subject. An AF point (or Zone AF frame) appears on the screen if you have set [ : AF area] to an option other than [Whole area AF]. In this case, aim the AF point over the subject.
Page 463 Focus and shoot/record. A tracking frame is displayed (in green for One-Shot AF or blue for Servo AF) when you press the shutter button halfway, and the camera beeps (only for One-Shot AF). An orange tracking frame indicates that the camera could not focus on subjects.
Page 464 Caution Tapping the screen to focus when [Preview AF] is set to [Disable] will focus with [One-Shot AF], regardless of the AF operation setting. If the subject's face is significantly out of focus, face detection will not be possible. Adjust the focus manually ( ) so that the face can be detected, then perform AF.
Page 465 Eye Detection You can shoot with the eyes of people or animals in focus. Select [ : Eye detection]. Select an option.
Page 466 Aim the camera at the subject. An AF point is displayed around their eye. To choose an eye when [ : AF area] is set to [Whole area AF], tap the screen. If your selected eye is not detected, an eye to focus on is selected automatically.
Page 467 Tracking with the Button You can press a button assigned to [Start/stop whole area AF tracking] in [ Customize buttons] to track subjects with a tracking frame [ ]. This example is based on assigning the < > button ( Check the tracking frame.
Page 468 Press the < > button. The tracking frame changes to [ ], which locks on to that subject for tracking and follows the subject within the screen if it moves. To cancel tracking, press the < > button again. To choose a subject to focus on when multiple subjects can be detected, press the <...
Page 469 Focus Mode You can set how the camera focuses. Select [ : Focus mode]. Select an option. The camera operates in autofocus mode. The camera operates in manual focus mode. Note You can also switch between [AF] and [MF] when the shooting screen is displayed by pressing the <...
Page 470 Caution : Focus mode] is not displayed under these conditions. • When lenses with a focus mode switch are attached • When lenses designed exclusively for manual focusing are attached • When no lens is attached When set to [MF], AF points are hidden during basic information display, and an MF icon is displayed.
Page 471 Manually Setting AF Points or Zone AF Frames You can manually set the AF point or Zone AF frame. Screens such as these are shown when set to Flexible Zone AF 1. Check the AF point. An AF point (1) is displayed. Move the AF point.
Page 472 Focus and shoot/record. Aim the AF point over the subject and press the shutter button halfway. Once the subject is in focus, the AF point changes color (to green for One-Shot AF or blue for Servo AF) and the camera beeps (only for One-Shot AF).
Page 473 Magnified View To check the focus, you can magnify display by approx. 5× or 10× by tapping [ Magnification is also possible by pressing the < > button and then the < > button. Magnification is centered on the tracking frame when the tracking frame is white (as an active frame) after subject detection.
Page 474 AF Shooting Tips Even when focus is achieved, pressing the shutter button halfway will focus again. Image brightness may change before and after autofocusing. Depending on the subject and shooting conditions, it may take longer to focus, or the continuous shooting speed may decrease. If the light source changes as you shoot, the screen may flicker, and focusing may be difficult.
Page 475 Shooting Conditions That Make Focusing Difficult Subject with low-contrast such as the blue sky, solid-color flat surfaces or when highlight or shadow details are clipped. Subjects in low light. Stripes and other patterns where there is contrast only in the horizontal direction. Subjects with repetitive patterns (Example: Skyscraper windows, computer keyboards, etc.).
Page 476 AF Range The available autofocus range varies depending on the lens used and settings such as aspect ratio, movie recording size, and Movie digital IS.
Page 477: Preview Af
Preview AF This function keeps subjects generally in focus. The camera is ready to focus immediately when you press the shutter button halfway. Select [ : Preview AF]. Select [Enable]. Caution Fewer shots are available when set to [Enable], because the lens is driven continuously and battery power is consumed.
Page 478: Af-Assist Beam Firing
AF-Assist Beam Firing You can enable or disable AF-assist beam firing of the camera or a Speedlite for EOS cameras. Select [ : AF-assist beam firing]. Select an option. [ON] Enable Enables firing of the AF-assist beam, when needed. [OFF] Disable Disables firing of the AF-assist beam.
Page 479 Caution Speedlite AF-assist beam firing is disabled when the Speedlite's [ : AF-assist beam firing] Custom Function is set to [Disable].
Page 480: Touch & Drag Af Settings
Touch & Drag AF Settings Touch & Drag AF Tapping to Select Subjects for Detection Positioning Method Active Touch Area Relative Sensitivity You can move the AF point or Zone AF frame by tapping or dragging on the screen as you look through the viewfinder.
Page 481 Tapping to Select Subjects for Detection To switch the subject tracked to a different person when several faces are detected, you can tap the area set in [Active touch area]. Note that this setting is not available with [Touch & drag AF] set to [Enable]. Select [Tap to select subject to detect].
Page 482 Positioning Method You can set how positions are specified by tapping or dragging. Set [Positioning method]. Absolute The AF point moves to the tapped or dragged position on the screen. Relative The AF point moves in the direction you drag, by an amount corresponding to the amount you drag, no matter where you tap the screen.
Page 483 Active Touch Area You can specify the area of the screen used for tap and drag operations. Select [Active touch area]. Set the area that will respond to touch. Note A round orange frame [ ] is displayed when you tap the screen with [ : AF area] set to [Whole area AF].
Page 484 Relative Sensitivity By setting [Positioning method] to [Relative], you can specify the amount of movement in response to tapping or dragging. Select [Rel. sensitivity]. Set the amount of movement. For faster AF point positioning, set toward the positive end, and for slower positioning, set toward the negative end.
Page 485: Manual Focus
Manual Focus Setting MF Peaking (Outline Emphasis) Focus Guide If focusing is not possible with autofocus, you can magnify the image and focus manually. Set the focus mode to < >. For RF lenses without a focus mode switch Set [ : Focus mode] to [MF].
Page 486 For RF lenses with a focus mode switch Set the lens focus mode switch to < >. Magnify the image. Pressing the < > button and then the < > button changes the magnification ratio, as follows. Move the magnified area. Use the <...
Page 487 Focus manually. While looking at the magnified image, turn the lens focusing ring to focus. After achieving focus, press the < > button to return to the normal view. Note In magnified view, the exposure is locked. Even when focusing manually, you can use Touch Shutter to shoot.
Page 488 Setting MF Peaking (Outline Emphasis) Edges of subjects in focus can be displayed in color to make focusing easier. You can set the outline color and adjust the sensitivity (level) of edge detection. Select [ : MF peaking settings]. Select [Peaking]. Select [On].
Page 489 Caution In magnified view, peaking display is not shown. During HDMI output, peaking display is not shown on equipment connected via HDMI. Note that peaking display is shown on the camera screen when [ : HDMI display] is set to [ MF peaking may be hard to discern at high ISO speeds, especially when ISO expansion is set.
Page 490 Focus Guide Setting [ : Focus guide] to [On] provides a guide frame that shows which direction to adjust focus and the extent of adjustment needed. Select [ : Focus guide]. Select [On]. To display the guide frame on the face of the person detected as the main subject, set [ : Subject to detect] to an option other than [None].
Page 491 The guide frame indicates the current position in focus and adjustment amount as follows. Much adjustment needed toward infinity Slight adjustment needed toward infinity In focus Slight adjustment needed toward close range Much adjustment needed toward close range...
Page 492 Adjustment information not detected Caution Under difficult shooting conditions for AF ( ), the guide frame may not be displayed correctly. Higher aperture values are more likely to prevent correct guide frame display. No AF points are displayed while the guide frame is displayed. The guide frame is not displayed in these situations.
Page 493: Customizing Af Functions
Customizing AF Functions 2] (In Movie Recording) You can configure AF functions in detail to suit your shooting style or subject. Lens electronic MF For lenses equipped with electronic manual focusing, you can specify how manual focus adjustment is used with One-Shot AF. ] Disable after One-Shot After the AF operation, manual focusing adjustment is disabled.
Page 494 Caution With [One-Shot→enabled (magnify)], display may not be magnified even if you turn the lens focusing ring while pressing the shutter button halfway immediately after shooting. If so, you can magnify display by releasing the shutter button, waiting for [ ] display, then pressing the shutter button halfway as you turn the lens focusing ring.
Page 495 Note To restrict [ : Focus mode] to [AF] when [Use as control ring] is selected, press the < > button and add a checkmark [ ] to [Focus mode is AF when used as a control ring]. Switching is also possible from the Quick Control screen, when customized with : Customize Quick Controls] (...
Page 496 * Lenses supporting slow focus transition during movie recording USM and STM lenses released in and after 2009 are compatible. For details, refer to the Canon website ( Caution With certain lenses, even if you adjust the AF speed, the speed may not change.
Page 497: Selecting The Drive Mode
Selecting the Drive Mode Single and continuous drive modes are provided. You can select the drive mode suiting the scene or subject. Press the < > key ( With an image displayed, press the < > key. Select the drive mode item. Turn the <...
Page 498 ] High-speed continuous shooting When you hold down the shutter button completely, you can shoot continuously as described below while you keep holding it down, based on the [ : Shutter mode] setting. • [Elec. 1st-curtain]: max. approx. 7.6 shots/sec. •...
Page 499 Continuous shooting speed with Servo AF may be slower depending on subject conditions or the lens used. Visit the Canon website for details on lenses supporting the maximum continuous shooting speed ( Continuous shooting speed may be lower when shooting under flickering light with : Anti-flicker shoot.] set to [Enable] (...
Page 500: Using The Self-Timer
Using the Self-Timer Use the self-timer when you want to be in the picture such as a commemorative photograph. Press the < > key ( With an image displayed, press the < > key. Select the drive mode item. Turn the < >...
Page 501 Take the picture. Focus on the subject, then press the shutter button completely. To check operation, look at the self-timer lamp, listen for beeps, or watch the countdown in seconds on the screen. Self-timer lamp blinking accelerates and the camera beeps quickly approx.
Page 502: Remote Control Shooting
Remote Control Shooting Wireless Remote Control BR-E1 You can shoot remotely by using an optional Wireless Remote Control BR-E1, which pairs via Bluetooth. Wireless Remote Control BR-E1 You can shoot remotely up to approx. 5 meters/16.4 feet from the camera. First, pair the camera and BR-E1 ( For operating instructions, refer to the BR-E1 instruction manual.
Page 503: Customizing Operation
Customizing Operation Adjusting the Zone AF Frame Size This section describes ways to customize AF operation. You can also use a combination of customized settings. Adjusting the Zone AF Frame Size You can resize the Zone AF frame displayed for Flexible Zone AF 1–3. Press the <...
Page 504 Press the < > button and select Flexible Zone AF 1, 2, or 3. Press the < > button. Adjust the Zone AF frame size. Use the < > keys to adjust the Zone AF frame size, then press the <...
Page 505: Playback
Playback This chapter covers topics related to playback—playing back captured still photos and movies—and introduces menu settings on the playback [ ] tab. Caution Normal display or selection on this camera may not be possible for images captured on other cameras, or images from this camera that have been edited or renamed on a computer or other device.
Page 506 • Movie Play Count • HDMI HDR Output...
Page 507: Tab Menus: Playback
Tab Menus: Playback Playback 1 Protect images Erase images Rotate stills Change mov rotate info Rating Print order Playback 2 Creative Assist Playback creative filters Red-eye correction Resize Cropping HEIF→JPEG conversion In Basic Zone modes, [HEIF→JPEG conversion] is not displayed.
Page 508 Playback 3 Slide show Set image search conditions View from last seen Image jump w/ Playback 4 Playback information display AF point disp. Playback grid Movie play count HDMI HDR output...
Page 509: Image Playback
Image Playback Single-Image Display Shooting Information Display Touch Playback Single-Image Display Switch to playback. Press the < > button. The last image captured or played back is displayed. Browse images. To play back images starting with the most recent, press the < >...
Page 510 No information Basic information display Shooting information display Exit image playback. Press the < > button to exit image playback and return to shooting standby. Note Lines indicating the image area are shown on RAW images captured with [ : Still img aspect ratio] set to [1:1], [4:3], or [16:9] ( If the search conditions are set with [ : Set image search conditions] (...
Page 511 Shooting Information Display With the shooting information screen displayed ( ), you can press the < > button to switch to other information. You can also customize the information displayed, in [ Playback information display] (...
Page 512 Touch Playback The camera features a touch-screen panel that you can touch to control playback. Supported touch operations are like those used with smartphones and similar devices. First, press the < > button to prepare for touch playback. Browse images Jump display Index display...
Page 513 Magnified view Note You can also magnify display by double-tapping with one finger.
Page 514: Magnified Image Display
Magnified Image Display Magnify the image. During image playback, press the < > button. The magnified view will appear. The magnified area position (1) will be displayed in the lower right of the screen. Each press of the < > button magnifies display. Each press of the <...
Page 515 Scroll the image. Use the < > keys to scroll around the magnified image. To cancel the magnified view, press the < > button or tap [...
Page 516: Index Display (Multiple-Image Display)
Index Display (Multiple-Image Display) Switch to the index display. During image playback, press the < > button. The 4-image index display will appear. The selected image is highlighted with an orange frame. Pressing the < > button again switches display from 9 images to 36, and then to 100. Pressing the <...
Page 518 Browse images. Press the < > keys to move the orange frame for image selection. Press the < > button in index display to show the selected image in single-image display.
Page 519: Movie Playback
Movie Playback Switch to playback. Press the < > button. Select a movie. Use the < >< > keys to select a movie to play. In single-image display, the [ ] icon displayed in the upper left of the screen indicates a movie. In index display, perforations at the left edge of a thumbnail indicate a movie.
Page 520 In single-image display, press the < > button. Select [ The movie will start playing back. Sound is played through the speaker (1). You can pause playback and access the movie playback panel by pressing the < > button ( ).
Page 521 Movie playback panel Item Playback Operations Skips backward approx. 1 sec. each time you press the < > key. Skip backward Holding the < > key down will rewind the movie. Displays the previous frame each time you turn the < >...
Page 522 Digest movie playback panel Item Playback Operations Press the < > key to display the first frame of the previous clip. Previous clip Displays the previous frame each time you turn the < > dial left. Previous frame Pressing the < >...
Page 523 Controls not on the previous two screens are as follows. Item Playback Operations Displays the editing screen ( Edit Adjust the slow motion speed by turning the < > dial. The slow Slow motion motion speed is indicated in the upper right of the screen. Erases the current clip.
Page 524: Editing A Movie's First And Last Scenes
Editing a Movie's First and Last Scenes You can edit out the first and last scenes of a movie in approx. 1-sec. increments. Pause movie playback. The movie playback panel will appear. Press the < > button, then select [...
Page 525 Specify the part to be edited out. Select either [ ] (cut beginning) or [ ] (cut end). Press the < >< > keys to go back or forward one frame. Each turn of the < > dial goes back or forward one frame. After deciding which part to edit out, press the <...
Page 526 Save. Select [ ] (1). The save screen will appear. To save it as a new file, select [New file], or to save it and overwrite the original movie file, select [Overwrite]. Select [ ] (2) to save a compressed version of the file. 4K movies are converted to Full HD movies before compression.
Page 527: Frame Extraction From 4K Movies
Frame Extraction from 4K Movies From 4K movies, you can select individual frames to save as JPEG or HEIF still images. This is referred to as “frame grabbing.” Select a 4K movie. Use the < >< > keys for selection. On the shooting information screen ( ), 4K movies are labeled with ] icons.
Page 528 Press the < > button to pause the movie. The movie playback panel will appear. Select a frame to grab. Use the movie playback panel to select the frame to grab as a still image. For movie playback panel instructions, see Movie playback panel.
Page 529 Save. Select [OK] to save the current frame as a JPEG still image. HEIF images are saved if you grab frames from movies recorded with : HDR shooting ] set to [Enable]. Check the destination folder and image file number. Select the image to display.
Page 530: Digest Movie Editing
Digest Movie Editing Individual chapters (clips) recorded in < > mode can be erased. Be careful when erasing clips, because they cannot be recovered. Switch to playback. Press the < > button. Select a still photo with an attached digest movie. Use the <...
Page 531 Select [ Digest movie playback begins. Press the < > button to pause the digest movie. Select a clip. Use [ ] or [ ] to select a clip. Erase the clip. Press the < > button, then select [ ].
Page 532 Select [OK]. The clip is erased, and the digest movie is overwritten. Note For other instructions on using the movie playback panel for digest movies, see Digest movie playback panel.
Page 533: Playback On A Tv Set
Playback on a TV Set By connecting the camera to a television with a commercially available HDMI cable, you can play back the captured still photos and movies on the television. If the image does not appear on the TV screen, confirm that [ : Video system] is correctly set to [For NTSC] or [For PAL] (depending on the video system of your television).
Page 534 Press the < > button. Images are now displayed on the television, with nothing displayed on the camera screen. The images will automatically be displayed at the optimum resolution matching the connected television. Caution Adjust movie sound volume with the television. The sound volume cannot be adjusted with the camera.
Page 535: Protecting Images
Protecting Images Protecting Individual Images Specifying the Range of Images to Protect Protecting All Images in a Folder or on a Card You can protect important images from being accidentally erased. Caution If you format the card ( ), the protected images will also be erased. Note Once an image is protected, it cannot be erased by the camera's erase function.
Page 536 Select [Select images]. Select the image to protect. Use the < >< > keys to select an image to protect. Protect the image. Press the < > button to protect the selected image, after which it will be labeled with a [ ] icon (1) at the top of the screen.
Page 537 Specifying the Range of Images to Protect While looking at the images in the index display, you can specify the first and last images for a range to protect all the specified images at once. Select [Select range]. Select [Select range] in [ : Protect images].
Page 538 Protecting All Images in a Folder or on a Card You can protect all the images in a folder or on a card at once. When you select [All images in folder] or [All images on card] in [ : Protect images], all the images in the folder or on the card will be protected.
Page 539: Erasing Images
Erasing Images Erasing Images Individually Selecting ([ ]) Multiple Images to Erase Together Specifying the Range of Images to Erase Erasing All Images in a Folder or on a Card You can either select and erase unnecessary images individually or erase them in one batch.
Page 540 Press the < > button. Erase the images. JPEG/HEIF/RAW images or movies Select [Erase]. RAW+JPEG/RAW+HEIF images Select an option. Series of images captured in [ ], [ ], or [ ] drive mode are erased when you select [Erase scene including image] during playback.
Page 541 Selecting ([ ]) Multiple Images to Erase Together By adding checkmarks to the images to be erased, you can erase all those images at once. Select [ : Erase images]. Select [Select and erase images]. Select an image. Use the < ><...
Page 542 Erase the images. Select [OK].
Page 543 Specifying the Range of Images to Erase While looking at the images in the index display, you can specify the first and last images for a range to erase all the specified images at once. Select [Select range]. Select [Select range] in [ : Erase images].
Page 544 Erase the images. Select [OK].
Page 545 Erasing All Images in a Folder or on a Card You can erase all the images in a folder or on a card at once. When you select [All images in folder] or [All images on card] in [ : Erase images], all the images in the folder or on the card will be erased.
Page 546: Rotating Still Photos
Rotating Still Photos You can use this feature to rotate the displayed image to the desired orientation. Select [ : Rotate stills]. Select an image to rotate. Use the < >< > keys to select an image.
Page 547 Rotate the image. Each time you press the < > button, the image is rotated clockwise as follows: 90° → 270° → 0°. To rotate another image, repeat steps 2 and 3. Note If you set [ : Auto rotate] to [On ) before taking pictures, you need not rotate the image with this function.
Page 548: Changing Movie Orientation Information
Changing Movie Orientation Information You can manually edit movie playback orientation information (which determines which side is up). Select [ : Change mov rotate info]. Select a movie. Use the < >< > keys to select a movie with orientation information to change.
Page 549 Change the orientation information. As you watch the camera and icon in the upper left of the screen, press the < > button to specify which side is up. Each press of the < > button edits the movie rotation information as follows: [ ] →...
Page 550: Rating Images
Rating Images Rating Individual Images Rating by Specifying the Range Rating All Images in a Folder or on a Card You can rate images on a scale of 1–5 ( ). This function is called rating. * Rating images can help you organize them. Rating Individual Images Select [ : Rating].
Page 551 Select the image to rate. Use the < >< > keys to select the image to rate. Rate the image. Press the < > button so that the current rating is outlined in blue, as shown. Use the < >< >...
Page 552 Rating by Specifying the Range While looking at the images in the index display, you can specify the first and last images for a range to rate all the specified images at once. Select [Select range]. Select [Select range] in [ : Rating].
Page 553 Rate the image. Turn the < > dial to select a rating mark, then select [OK]. All the images in the specified range will be rated (same rating) at once.
Page 554 Rating All Images in a Folder or on a Card You can rate all the images in a folder or on a card at once. Under [ : Rating], when you select [All images in folder] or [All images on card], all the images in the folder or on the card will be rated.
Page 555 Note Values next to ratings are displayed as [###] if more than 1,000 images have that rating. With [ : Set image search conditions] and [ : Image jump w/ ], you can display only the images given a specific rating.
Page 556: Print Ordering (Dpof)
Print Ordering (DPOF) Print Options Selecting Images for Printing DPOF (Digital Print Order Format) enables you to print images recorded on the card according to your printing instructions such as the image selection, quantity to print, etc. You can print multiple images in one batch or create a print order for a photofinisher. You can set the print settings such as print type, date imprinting, file number imprinting, etc.
Page 557 Set the options as desired. Set [Print type], [Date], and [File No.] options. Standard Prints one image on one sheet. Multiple thumbnail images are printed Index on one sheet. Print type Prints both the standard and index Both prints. [On] imprints the recorded date of the captured Date image.
Page 558 Caution If you print an image with a large image size using the [Index] or [Both] setting ), the index print may not be printed with certain printers. In this case, resize the image ( ), then print the index print. Even if [Date] and [File No.] are set to [On], the date or file number may not be imprinted, depending on the print type setting and printer.
Page 559 Selecting Images for Printing Selecting images Select and specify the images individually. Press the < > button to save the print order to the card. Standard/Both (1) Quantity (2) Total images selected Press the < > button to set the print quantity for the current image to 1. By pressing the <...
Page 560 Selecting multiple images Select range Select [Select range] in [Multiple]. Selecting the first and last images of the range marks all the images in the range with a checkmark [ ], and one copy of each image will be specified for printing. All images in a folder Select [Mark all in folder] and select the folder.
Page 561: Creative Assist
Creative Assist You can process RAW images by applying your preferred effects and saving as JPEGs. Select [ : Creative Assist]. Select an image. Use the < >< > keys to select an image to process, then press the < >...
Page 562 Select an effect. Use the < > dial to select the effect. By selecting [Preset] and pressing the < > button, you can choose [VIVID], [SOFT], or other preset effects. [AUTO1], [AUTO2], and [AUTO3] are effects recommended by the camera based on image conditions.
Page 563 To reset the settings, press the < > button and select [OK] after a confirmation message is displayed. To confirm the effect, press the < > button. Select [OK] to save the image.
Page 564: Playback Creative Filters
Playback Creative Filters Creative Filter Characteristics You can apply the following filter processing to an image and save it as a separate image: Grainy B/W, Soft focus, Fish-eye effect, Art bold effect, Water painting effect, Toy camera effect, and Miniature effect. Select [ : Playback creative filters].
Page 565 Select a filter effect ( Use the < > dial to select an effect, then press the < > button. Adjust the filter effect. Adjust the filter effect, then press the < > button. For [Miniature effect], you can move the area that looks sharp (the white frame).
Page 566 Save. Select [OK]. Check the destination folder and image file number, then select [OK]. To apply filter processing to other images, repeat steps 2 to 5. Note RAW images cannot be selected. Note that for images captured in RAW+JPEG shooting, filter processing is applied to the JPEG image before saving the results. Images processed using the fish-eye effect filter will not have Dust Delete Data ) appended.
Page 567 Creative Filter Characteristics Grainy B/W Makes the image grainy and black and white. By adjusting the contrast, you can change the black-and-white effect. Soft focus Gives the image a soft look. By adjusting the blur, you can change the degree of softness.
Page 568: Red-Eye Correction
Red-Eye Correction Automatically corrects relevant portions of images affected by red-eye. The image can be saved as a separate file. Select [ : Red-eye correction]. Select an image. Use the < >< > keys to select an image to correct, then press the <...
Page 569 Select [OK]. The image is saved as a separate file. Caution Some images may not be corrected accurately.
Page 570: Resizing Jpeg/Heif Images
Resizing JPEG/HEIF Images You can resize a JPEG or HEIF image to reduce the pixel count and save it as a new image. Resizing is available for , , or JPEGs or HEIFs (in sizes except ), including those captured in RAW+JPEG and RAW+HEIF shooting. Note that resizing is not available for images, RAW images, or frame-grab images from 4K movies.
Page 571 Select the desired image size. Select the desired image size (1). Save. Select [OK] to save the resized image. Check the destination folder and image file number, then select [OK]. To resize another image, repeat steps 2 to 4.
Page 572: Cropping Jpeg/Heif Images
Cropping JPEG/HEIF Images You can crop a captured JPEG or HEIF image and save it separately. RAW images and frame-grab images from 4K movies cannot be cropped. Select [ : Cropping]. Select an image. Use the < >< > keys to select an image to crop. Press the <...
Page 573 Set the cropping frame. The image area within the cropping frame will be cropped. Resizing the cropping frame size Press the < > button to resize the cropping frame. The smaller the cropping frame, the more magnified the cropped image will look. Correcting tilt You can correct image tilt by ±10°.
Page 574 Check a preview of the cropped image. Turn the < > dial to select [ ], then press the < > button. The image area to crop is displayed. Save. Turn the < > dial to select [ ], then press the < >...
Page 575: Converting Heif To Jpeg
Converting HEIF to JPEG You can convert HEIF images captured in HDR shooting and save them as JPEG images. Converting Individual Images Specifying the Range of Images to Convert Note HEIF images that have been converted to JPEGs are labeled [ Converting Individual Images Select [ : HEIF→JPEG conversion].
Page 576 Select an image. Use the < >< > keys to select an HEIF image, then press the < > button. To select other images, repeat step 3. Press the < > button to convert to JPEG. Save. Select [OK] to save the JPEG image. If there are other images for conversion, select [Yes].
Page 577 Select the images to use for display. Select [Original image] to use the original HEIF images for display. Select [Processed img.] to use the converted JPEG images for display. Note Some scenes may look different after conversion if the original and converted images are compared.
Page 578 Specifying the Range of Images to Convert Select [Select range]. Specify the range of images. Select the first image (start point). Next, select the last image (end point). A checkmark [ ] will be appended to all the images within the range between first and last images.
Page 579 Save. Select [OK] to save the JPEG image. If there are other images for conversion, select [Yes]. Select the images to use for display. Select [Original image] to use the original HEIF images for display. Select [Processed img.] to use the converted JPEG images for display.
Page 580: Slide Show
Slide Show You can play back the images on the card as an automatic slide show. Specify the images to be played back. To play back all the images on the card, go to step 2. If you want to specify the images to be played back in the slide show, filter the images with [ : Set image search conditions] ( Select [...
Page 581 Set the playback as desired. Select [Set up]. Set the [Display time], [Repeat] (repeated playback), and [Transition effect] (effect when changing images) settings for the still photos. After completing the settings, press the < > button. Display time Repeat Transition effect...
Page 582 Start the slide show. Select [Start]. After [Loading image...] is displayed, the slide show will start. Exit the slide show. To exit the slide show and return to the setting screen, press the < > button. Note To pause the slide show, press the < >...
Page 583: Setting Image Search Conditions
Setting Image Search Conditions Clearing the Search Conditions You can filter image display according to your search conditions. After setting the image search conditions, you can play back and display only the found images. You can also protect, rate, play a slide show, erase, and apply other operations to filtered images. Select [ : Set image search conditions].
Page 584 Set the search conditions. Use the < >< > keys to select an item. Use the < >< > keys to set the option. A checkmark [ ] (1) is appended to the left of the option. (Specified as the search condition.) If you select the option and press the <...
Page 585 Apply the search conditions. Press the < > button and read the message displayed. Select [OK]. The search condition is applied. Display the found images. Press the < > button. Only the images that match the set conditions (filtered) will be played back.
Page 586 Note Search conditions may be cleared after operations involving camera power or card changes and editing, adding, or erasing images. Auto power off time may be extended while the [ : Set image search conditions] screen is displayed. Clearing the Search Conditions Access the screen in step 2, then press the <...
Page 587: Resuming From Previous Playback
Resuming from Previous Playback Select [ : View from last seen]. Select an option. [Enable]: Playback resumes from the last image displayed (unless you have just finished shooting). [Disable]: Playback resumes from your most recent shot whenever the camera is restarted.
Page 588: Browsing Images With The Dial
Browsing Images with the Dial In single-image display, you can turn the < > dial to jump through the images forward or backward according to the jump method set. Select [ : Image jump w/ Select the jump method. Note With [Jump images by the specified number], you can turn the <...
Page 589 Browse by jumping. (1) Jump method (2) Playback position Press the < > button. In single-image display, turn the < > dial. You can browse by the jump method set.
Page 590: Customizing Playback Information Display
Customizing Playback Information Display Histogram You can specify screens and accompanying information displayed during image playback. Select [ : Playback information display]. Add a checkmark [ ] next to the number of screens to display. Use the < >< > keys to select a number. Press the <...
Page 591 Histogram The histograms show signal levels across the tonal range. Brightness display (for checking the general exposure level and overall gradation) and RGB display (for checking saturation and gradation of red, green, and blue) are available. You can switch the histogram displayed by pressing the <...
Page 592 [Brightness] display This histogram is a graph showing the distribution of the image's brightness level, with the horizontal axis indicating the brightness level (darker on the left and brighter on the right) and the vertical axis indicating the pixel count at each brightness level. The more pixels there are toward the left, the darker the image, and the more pixels there are toward the right, the brighter the image.
Page 593 [RGB] display This histogram is a graph showing the distribution of each primary color's brightness level in the image (RGB or red, green, and blue), with the horizontal axis indicating the color's brightness level (darker on the left and brighter on the right) and the vertical axis indicating the pixel count at each color brightness level.
Page 594: Af Point Display
AF Point Display You can display the AF points that were used to focus, which will be outlined in red on the playback screen. Select [ : AF point disp.]. Select [Enable].
Page 595 Playback Grid You can display a grid over still photos shown in single-image display on the playback screen. This function is convenient for checking the image's vertical or horizontal tilt as well as composition. Select [ : Playback grid]. Select an option. Note When panoramic images are displayed, a single vertical and horizontal line are shown if [Playback grid] is set to an option other than [Off].
Page 596 Movie Play Count You can select how time is displayed on the movie playback screen. Select [ : Movie play count].
Page 597 Select an option. Rec time Displays the recording or playback time during movie playback. Time code Displays the time code during movie playback. Note Time codes are always recorded to movie files (except when High Frame Rate movies are set to [Free run]), regardless of the [Movie rec count] setting. The [Movie play count] setting in [ : Time code] is linked to the [ : Movie...
Page 598 HDMI HDR Output You can view RAW or HEIF images in HDR by connecting the camera to an HDR TV. Select [ : HDMI HDR output]. Select [On]. Note Make sure the HDR TV is set up for HDR input. For details on how to switch inputs on the TV, refer to the TV manual.
Page 599 Caution Important Note that Canon cannot be held liable for any loss or damage caused by erroneous wireless communication settings when using the camera. In addition, Canon cannot be held liable for any other loss or damage caused by use of the camera.
Page 600 Tab Menus: Communication Functions Communication functions 1 Connect to smartphone(tablet) Connect to Wireless Remote Connect to EOS Utility Upload to image.canon Print from Wi-Fi printer Advanced connection Communication functions 2 Airplane mode Wi-Fi settings Bluetooth settings Camera name GPS settings...
Page 601 Caution Some menu items cannot be configured while the camera is connected to computers or other devices via an interface cable. The Wi-Fi connection will be terminated if you set the camera power to < > or open the card/battery compartment cover. With a Wi-Fi connection established, the camera's auto power off does not function.
Page 602 Connecting to a Smartphone or Tablet Preparing the Smartphone Connecting to a Smartphone via Wi-Fi Main Functions of Camera Connect Maintaining a Wi-Fi Connection When the Camera Is Off Canceling the Pairing Automatic Image Transfer to a Smartphone as You Shoot Sending Images to a Smartphone from the Camera You can do the following after pairing the camera with a smartphone.
Page 603 Preparing the Smartphone Turning on Bluetooth and Wi-Fi on a Smartphone Turn on Bluetooth and Wi-Fi from the smartphone settings screen. Note that pairing with the camera is not possible from the smartphone's Bluetooth settings screen. Installing Camera Connect on a Smartphone The dedicated app Camera Connect (free of charge) must be installed on the smartphone on which Android or iOS is installed.
Page 604 Connecting to a Smartphone via Wi-Fi Select [ Connect to smartphone(tablet)]. Select [Add a device to connect to]. Press the < > button.
Page 605 Start pairing. Press the < > button to start pairing. If Camera Connect is not installed, use the smartphone to scan the QR code on the screen, go to Google Play or App Store to install Camera Connect, then press the < >...
Page 606 Complete the pairing process. Press the < > button to finish pairing. The name of the connected device is displayed. Caution The camera cannot be connected to two or more devices at the same time via Bluetooth. To switch to a different smartphone for the Bluetooth connection, see Reconnecting via Wi-Fi/Bluetooth.
Page 607 Confirm that the devices are connected via Wi-Fi. The [ Wi-Fi on] screen is displayed on the camera. ( The Wi-Fi connection to a smartphone is now complete. To end the Wi-Fi connection, select [Disconnect] on the [ Wi-Fi on] screen. Terminating the Wi-Fi connection will switch the camera to the Bluetooth connection.
Page 608 [ Wi-Fi on] screen Send to smartphone after shot Images can be transferred to a smartphone automatically ( Confirm Wi-Fi settings You can check setting details for Wi-Fi connections. Error details After any Wi-Fi connection errors, you can check the error details ( Disconnect Ends the Wi-Fi connection.
Page 609 Main Functions of Camera Connect Images on camera Images can be browsed, deleted, or rated. Images can be saved on a smartphone. Effects can be applied to RAW images that you can subsequently save to a smartphone as JPEGs ( Remote live view shooting Enables remote shooting as you view a live image on the smartphone.
Page 610 Maintaining a Wi-Fi Connection When the Camera Is Off Even when the camera power switch is set to < >, as long as it is paired to a smartphone via Bluetooth, you can use the smartphone to browse images on the camera or perform other operations.
Page 611 Canceling the Pairing Cancel pairing with a smartphone as follows. Select [ Connect to smartphone(tablet)]. Select [Edit/delete device]. Select the smartphone to cancel pairing with. Smartphones currently paired with the camera are labeled [ ].
Page 612 Select [Delete connection information]. Select [OK]. Clear the camera information on the smartphone. In the smartphone's Bluetooth setting menu, clear the camera information registered on the smartphone.
Page 613 Automatic Image Transfer to a Smartphone as You Shoot Your shots can be automatically sent to a smartphone. Before following these steps, make sure the camera and smartphone are connected via Wi-Fi. Select [ Connect to smartphone(tablet)]. Select [Send to smartphone after shot]. Set [Auto send] to [Enable].
Page 614 Set [Size to send]. Take the picture.
Page 615 Sending Images to a Smartphone from the Camera You can use the camera to send images to a smartphone connected via Wi-Fi. Switch to playback. Press the < > button. Select [ Send images to smartphone]. If you perform this step while connected via Bluetooth, a message is displayed requesting you to establish a Wi-Fi connection.
Page 616 (1) Sending images individually Select an image to send. Use the < > dial or < >< > keys to select an image to send, then press the < > button. To select the image from index display, press the < >...
Page 617 (2) Sending multiple selected images Press the < > button. Select [Send selected].
Page 618 Select images to send. Use the < > dial or < >< > keys to select an image to send, then press the < > button. You can press the < > button to select the images from 3-image display. To return to the single-image display, press the < >...
Page 619 Select [Size to send]. On the displayed screen, select an image size. When sending movies, select the image quality in [Quality to send]. Select [Send].
Page 620 (3) Sending a specified range of images Press the < > button. Select [Send range]. Specify the range of images. Select the first image (start point). Next, select the last image (end point). A checkmark [ ] will be appended to all the images within the range between first and last images.
Page 621 Press the < > button. Select [OK] when a message is displayed. Select [Size to send]. On the displayed screen, select an image size. When sending movies, select the image quality in [Quality to send]. Select [Send].
Page 622 (4) Sending all images on the card Press the < > button. Select [Send all card].
Page 623 Select [Size to send]. On the displayed screen, select an image size. When sending movies, select the image quality in [Quality to send]. Select [Send].
Page 624 (5) Sending images that match the search conditions Send all the images that match the search conditions set in [Set image search conditions] at once. For details on [Set image search conditions], see Setting Image Search Conditions. Press the < >...
Page 625 Select [Size to send]. On the displayed screen, select an image size. When sending movies, select the image quality in [Quality to send]. Select [Send].
Page 626 Ending image transfer Press the < > button on the image transfer screen. To end the Wi-Fi connection, select [Disconnect] on the [ Wi-Fi on] screen ( Caution During the image transfer operation, a picture cannot be taken even if the camera's shutter button is pressed.
Page 627 Connecting to a Wireless Remote Control Canceling the Pairing This camera can also be connected to Wireless Remote Control BR-E1 (sold separately, via Bluetooth for remote control shooting. Select [ Connect to Wireless Remote]. Select [Add a device to connect to].
Page 628 Pair the devices. When the screen shown above appears, press and hold the <W> and <T> buttons on the BR-E1 simultaneously for at least 3 sec. After a message confirms that the camera is paired with the BR-E1, press the < >...
Page 629 Canceling the Pairing Before pairing with a different BR-E1, clear the information about the connected remote control. Select [ Connect to Wireless Remote]. Select [Delete connection information]. Select [OK].
Page 630 Connecting to EOS Utility Operating the Camera Using EOS Utility This section describes how to connect the camera to a computer via Wi-Fi and perform camera operations using EOS software or other dedicated software. Install the latest version of software on the computer before setting up a Wi-Fi connection. For computer operating instructions, refer to the computer user manual.
Page 631 Check the SSID (network name) and password. Check the SSID (1) and Password (2) displayed on the camera screen. To establish a Wi-Fi connection using an access point, press the < > button. Follow the instructions for the connection method used.
Page 632 Steps on the computer (1) Select the SSID, then enter the password. Computer's screen (sample) On the computer's network setting screen, select the SSID checked in step 4 in Steps on the camera (1). For the password, enter the password checked in step 4 in Steps on the camera (1).
Page 633 Steps on the camera (2) Select [OK]. The following message is displayed. “******” represents the last six digits of the MAC address of the camera to be connected.
Page 634 Steps on the computer (2) Start EOS Utility. In EOS Utility, click [Pairing over Wi-Fi/LAN]. If a firewall-related message is displayed, select [Yes]. Click [Connect]. Select the camera to connect to, then click [Connect].
Page 635 Steps on the camera (3) Establish a Wi-Fi connection. Select [OK]. Wi-Fi on] is displayed on the camera screen ( The Wi-Fi connection to a computer is now complete. Operate the camera using EOS Utility on the computer. To reconnect via Wi-Fi, see Reconnecting via Wi-Fi/Bluetooth.
Page 636 Wi-Fi on] screen Confirm Wi-Fi settings You can check setting details for Wi-Fi connections ( Error details After any Wi-Fi connection errors, you can check the error details ( Disconnect Ends the Wi-Fi connection. Caution If the Wi-Fi connection is terminated while recording a movie with remote shooting, the following will occur.
Page 637 Link the camera to image.canon to send images directly from the camera. A smartphone with a browser and internet connection is required. For instructions on how to use image.canon services and details on countries and regions where it is available, visit the image.canon site (https://image.canon/).
Page 638 Select [Connect]. If the dedicated app has not been installed, select [Install]. Select [OK]. Scan the QR code with the dedicated app. Select [OK].
Page 639 Establish a Wi-Fi connection. Connect to an access point via Wi-Fi. Follow the instructions for the connection method used. • Connecting via WPS ( • Connecting manually to detected networks ( • Connecting manually by specifying access point information ( Confirm that the number is displayed in the dedicated app.
Page 640 Complete the settings. Press the < > button. The setting menu is displayed on the camera screen. Note The [ ] icon changes to [ Check the dedicated app. Confirm that the camera model name is registered in the dedicated app.
Page 641 [Upload to image.canon] screen Auto send You can choose whether to upload images automatically. Type to send You can select the type of images uploaded. Switch network You can change the settings for Wi-Fi connections. Clear camera web link settings...
Page 642 Uploading Images to image.canon Images are automatically uploaded to image.canon after the camera starts up (or recovers from auto power off). Images uploaded to image.canon can be downloaded to a computer or transferred to other web services. Select [ Upload to image.canon].
Page 643 Set [Type to send]. Stills only Uploading only applies to still photos. Stills+movies Uploading applies to both still photos and movies. Restart the camera. Note Uploaded images are stored at image.canon for 30 days at the original image size, without storage limitations.
Page 644 Connecting to a Printer via Wi-Fi Image Printing Print Settings This section describes how to print images by directly connecting the camera to a printer supporting PictBridge (Wireless LAN) via Wi-Fi. For printer operating instructions, refer to the printer user manual. Select [ Print from Wi-Fi printer].
Page 645 Check the SSID (network name) and password. Check the SSID (1) and Password (2) displayed on the camera screen. To establish a Wi-Fi connection using an access point, press the < > button. Follow the instructions for the connection method used.
Page 646 Select the printer. In the list of detected printers, select the printer to connect to via Wi-Fi. If your preferred printer is not listed, selecting [Search again] may enable the camera to find and display it.
Page 647 Image Printing Printing images individually Select the image to print. Press the < >< > keys to select an image to print, then press the < > button. To select the image from index display, press the < > button. Select [Print image].
Page 648 Print the image. For the print setting procedures, see Print Settings. Select [Print], then [OK] to start printing.
Page 649 Printing according to specified image options Press the < > button. Select [Print order]. Set the printing options. For the print setting procedures, see Print Ordering (DPOF). If the print order is complete before establishing a Wi-Fi connection, go to step 4.
Page 650 Select [Print]. [Print] can be selected only when an image is selected and the printer is ready to print. Configure [Paper settings] ( Print the image. When [OK] is selected, printing starts. Caution Shooting is not possible while connected to a printer via Wi-Fi. RAW images, HEIF images, and movies cannot be printed.
Page 651 Note When you use a battery to power the camera, make sure it is fully charged. It may take some time until printing starts after you select [Print], depending on file size and image quality. To stop printing, press the < >...
Page 652 Print Settings The screen display and setting options vary depending on the printer. Also, certain settings may not be available. For details, refer to the printer's instruction manual. Print settings screen Sets date or file number printing ( Sets the printing effects ( Sets the number of copies to print ( Sets the print area ( Sets the paper size, type, and layout (...
Page 653 Paper settings Select [Paper settings]. [ ] Setting the paper size Select the size of the paper in the printer.
Page 654 [ ] Setting the paper type Select the type of the paper in the printer. [ ] Setting the page layout Select the page layout. Caution If the image's aspect ratio is different from the printing paper's aspect ratio, the image may be cropped significantly when you print it as a borderless print.
Page 655 ] Setting printing effects (image optimization) Select [ Select printing effects. Caution ISO speeds may be misidentified in shooting information printed for images shot at an expanded ISO speed (H). [Default] in printing effects and other options refers to default settings determined by the printer manufacturer.
Page 656 Cropping the image Set cropping immediately before printing. Changing other print settings after you crop images may require you to crop the images again. Select [Cropping] on the print setting screen. Set the cropping frame size, position, and orientation. The image area within the cropping frame will be printed. The shape of the frame (aspect ratio) can be changed in [Paper settings].
Page 657 Caution Depending on the printer, the cropped image area may not be printed as you specified. The smaller the cropping frame, the lower the resolution at which images are printed. Note Handling printer errors If printing does not resume after you resolve a printer error (such as no ink or paper) and select [Continue], use buttons on the printer.
Page 658 Advanced Connections Connecting to a Smartphone or Tablet This section describes how to establish a direct Wi-Fi connection with a smartphone and use Camera Connect to control the camera. Connecting to a Smartphone or Tablet Select [ : Advanced connection]. Select [Connect to smartphone(tablet)].
Page 659 Select [Add a device to connect to]. Start searching for access points. To start searching if Camera Connect is already installed on the smartphone, press the < > button. If Camera Connect is not installed, use the smartphone to scan the QR code on the screen, go to Google Play or App Store to install Camera Connect, then press the <...
Page 660 Establish a Wi-Fi connection. Connect to an access point via Wi-Fi. Follow the instructions for the connection method used. • Connecting via WPS ( • Connecting manually to detected networks ( • Connecting manually by specifying access point information ( Start Camera Connect and tap the camera name.
Page 661 Basic Communication Settings Preparation Checking the Type of Access Point Connecting via WPS (PBC Mode) Connecting via WPS (PIN Mode) Connecting Manually to Detected Networks Connecting Manually by Specifying Networks Connecting in Camera Access Point Mode Setting the IP Address Before using the following camera communication functions, configure camera and computer settings as described starting in Preparation.
Page 662 Preparation Preparing to use communication functions EOS Utility A computer with EOS Utility (EOS software) installed is required. For EOS Utility installation instructions, visit the Canon website. Settings. Caution Transferring movies Each movie file is large, and transferring large files over Wi-Fi may take some time.
Page 663 Checking the Type of Access Point When connecting via an access point, check whether the access point supports WPS*, which simplifies connections between Wi-Fi devices. If you are unsure about WPS compatibility, refer to the access point user manual or other documentation.
Page 664 Connecting via WPS (PBC Mode) Instructions in this section are continued from Checking the Type of Access Point. This is a connection method used with access points compatible with WPS. In pushbutton connection mode (PBC mode), the camera and access point can be connected simply by pressing the WPS button on the access point.
Page 665 Connect to the access point. Press the access point's WPS button. For details on where the button is and how long to press it, refer to the access point user manual. Select [OK] to initiate connection with the access point. The following screen is displayed once the camera is connected to the access point.
Page 666 Connecting via WPS (PIN Mode) Instructions in this section are continued from Checking the Type of Access Point. This is a connection method used with access points compatible with WPS. In PIN code connection mode (PIN mode), an 8-digit identification number indicated on the camera is entered on the access point to establish a connection.
Page 667 Enter the PIN code. On the access point, enter the 8-digit PIN code displayed on the camera screen. For instructions on entering PIN codes on the access point, refer to the access point user manual. After entering the PIN code, select [OK] on the camera. Connect to the access point.
Page 668 Set the IP address. Go to Setting the IP Address.
Page 669 Connecting Manually to Detected Networks Instructions in this section are continued from Checking the Type of Access Point. Connect to an access point by selecting its SSID (or ESS-ID) in a list of active access points nearby. Selecting the access point Select an access point on the [Select a network] screen.
Page 670 Entering the access point encryption key Enter the encryption key (password) set on the access point. For details on the encryption key that has been set, refer to the access point's user manual. The screens displayed in steps 2–3 vary depending on the authentication and encryption set on the access point.
Page 671 Set the IP address. Go to Setting the IP Address.
Page 672 Connecting Manually by Specifying Networks Instructions in this section are continued from Checking the Type of Access Point. Connect to an access point by entering its SSID (or ESS-ID). Entering the SSID Select [Manual settings] on the [Select a network] screen. Enter the SSID (network name).
Page 673 Setting the access point authentication method Select the authentication method. Select an option and then [OK] to go to the next screen. On the [Encryption settings] screen displayed if [Open system] is selected, select [Disable] or [WEP]. Entering the access point encryption key Enter the encryption key (password) set on the access point.
Page 674 Enter the encryption key. Press the < > button to access the virtual keyboard ( ), then enter the encryption key. Select [OK] to initiate connection with the access point. The following screen is displayed once the camera is connected to the access point.
Page 675 Connecting in Camera Access Point Mode Camera access point mode is a connection method for directly connecting the camera and other devices via Wi-Fi without using an access point. Two connection methods are available, as follows. Connecting with Easy connection Network settings for camera access point mode are configured automatically.
Page 676 Use the other device to connect to the camera. (1) SSID (network name) (2) Encryption key (password) In other device's Wi-Fi settings, select the SSID (network name) shown on the camera screen, then enter the password. Complete the connection settings based on the device to connect to.
Page 677 Connecting with Manual connection Network settings for camera access point mode are configured manually. Set [SSID], [Channel setting], and [Encryption settings] on each screen displayed. Select [Manual connection]. Select [OK]. Enter the SSID (network name). Press the < > button to access the virtual keyboard ( ), then enter the SSID.
Page 678 Select a channel setting option. To specify the settings manually, select [Manual setting], then turn the < > dial. Select [OK]. Select an encryption setting option. For encryption, select [AES]. Select [OK]. When [AES] is selected, the [Password] screen is displayed. Press the <...
Page 679 Select [Auto setting]. Select [OK]. If an error is displayed for [Auto setting], set the IP address manually Use the other device to connect to the camera. (1) SSID (network name) (2) Encryption key (password) Complete connection settings for the communication function.
Page 680 Setting the IP Address Select a method of setting the IP address, and then set the IP address on the camera. When IPv6 is used, the camera only connects via IPv6. IPv4 connections are disabled. Setting the IP address automatically Set up the IP address settings automatically.
Page 681 Setting the IP address manually Set up the IP address settings manually. Note that the items displayed vary depending on the communication function. Select [Manual setting]. Select [OK]. Select an option to configure. Select an option to access the screen for numerical input. To use a gateway, select [Enable], then select [Address].
Page 682 Enter the number. Turn the < > dial to switch to other input fields at the top of the screen, and press the < >< > keys to select numbers to enter. Press the < > button to enter the selected number. To delete the number just entered, press the <...
Page 683 Select an IPv6 option. Select an option and then [OK] to go to the next screen. Select [Enable] to use IPv6. Complete the connection settings based on the device to connect to.
Page 684 Reconnecting via Wi-Fi/Bluetooth Connection settings for devices you have connected to via Wi-Fi or Bluetooth are retained on the camera. You can use these settings to reconnect to the same device. Select the type of connection for the device to connect to. After the [Wi-Fi on] screen appears, select [Disconnect], then repeat step 1.
Page 685 Editing/Deleting Connection Settings Changing Connection Nicknames Deleting Connection Information Before changing or deleting connection settings, end the Wi-Fi connection. Changing Connection Nicknames You can change connection setting nicknames. Select the type of connection for the device to connect to. After the [Wi-Fi on] screen appears, select [Disconnect], then repeat step 1.
Page 686 Select the connection settings for the nickname to change. Select [Change device nickname]. Change the nickname. Use the virtual keyboard ( ) to enter the nickname. Press the < > button, then select [OK].
Page 687 Deleting Connection Information Access the connection settings screen. Follow steps 1–3 in Changing Connection Nicknames. For [ Connect to Wireless Remote], see Canceling the Pairing. Select [Delete connection information]. Select [OK].
Page 688 Airplane Mode You can temporarily disable Wi-Fi and Bluetooth functions. Select [ : Airplane mode]. Set to [On]. ] is displayed on the screen. Note ] may not be displayed in still photo shooting, movie recording, or playback, depending on display settings. If it is not displayed, press the < >...
Page 689 Wi-Fi Settings Checking the MAC Address Select [ : Wi-Fi settings]. Select an option. Wi-Fi When the use of electronic devices and wireless devices is prohibited, such as on board airplanes or in hospitals, set it to [Disable]. MAC address You can check the MAC address of the camera.
Page 690 Select [ : Wi-Fi settings]. Select [MAC address]. Check the MAC address.
Page 691 Bluetooth Settings Select [ : Bluetooth settings]. Select an option. Bluetooth If you will not use the Bluetooth function, select [Disable]. Bluetooth address You can check the camera's Bluetooth address. Connect to You can check the name and communication status of the paired device.
Page 692 Camera Name You can change the camera name (displayed on smartphones and other cameras) as needed. Select [ : Camera name]. Change the camera name. Use the virtual keyboard ( ) to enter the camera name. Press the < > button, then select [OK].
Page 693 GPS Settings GPS via Mobile GPS Information Display GPS via Mobile You can use a smartphone to geotag images. Complete these settings after installing the dedicated Camera Connect app ( ) on the smartphone. On the smartphone, activate location services. Establish a Bluetooth connection.
Page 694 Select [GPS via mobile]. Select [Enable]. Take the picture. Images are geotagged with the information from the smartphone.
Page 695 GPS Information Display You can check the status of smartphone location information acquisition in the GPS connection icon on the screens for still photo shooting or movie recording ( respectively). Gray: Location services are off Blinking: Location information cannot be acquired On: Location information acquired Geotagging images as you shoot Images you shoot while the GPS icon is on are geotagged.
Page 696 Caution The smartphone can acquire location information only while it is paired with the camera via Bluetooth. Direction information is not acquired. Acquired location information may not be accurate, depending on traveling conditions or smartphone status. It may take some time to acquire location information from the smartphone after you turn the camera on.
Page 697 Error Details You can display details of errors affecting the camera's wireless communication functions. Select [ : Error details]. Details of errors that have occurred are displayed. For more information on errors, see Responding to Error Messages.
Page 698 Resetting Communication Settings All wireless communication settings can be deleted. By deleting the wireless communication settings, you can prevent their information from being exposed when you lend or give your camera to other people. Select [ : Reset communication settings]. Select [OK].
Page 699 Virtual Keyboard Operations Input area, for entering text Cursor keys, for moving in the input area Current no. of characters/no. available Keyboard Switch input modes Space Delete a character in the input area Exit input Use the < > dial to move within (1). Use the <...
Page 700 Responding to Error Messages When an error occurs, display the details of the error by following one of the procedures below. Then, eliminate the cause of the error by referring to the examples shown in this chapter. Select [ : Error details]. Select [Error details] on the [Wi-Fi on] screen.
Page 701 11: Connection target not found In the case of [Connect to smartphone(tablet)], is Camera Connect running? • Establish a connection using Camera Connect ( In the case of [Connect to EOS Utility], is EOS Utility running? • Start EOS Utility and try to connect again ( Are the camera and the access point set to use the same encryption key for authentication? •...
Page 702 22: No response from DNS server What to check on the camera On the camera, the DNS address is set to [Manual setting]. Is this the correct setting? • If no DNS server is used, set the camera's DNS address setting to [Disable] ( On the camera, does the DNS server's IP address setting match the server's actual address? •...
Page 703 23: Device with same IP address exists on selected network Is another device on the camera network using the same IP address as the camera? • Change the camera's IP address to avoid using the same address as another device on the network. Otherwise, change the IP address of the device that has a duplicate address.
Page 704 • Check the connection status of the network. 127: An error has occurred A problem other than error code number 121 to 126 occurred while the camera is connected to the Web service. • Try again to establish the Wi-Fi connection to image.canon.
Page 705 • Try accessing image.canon over Wi-Fi again later. 131: Try again An error occurred when connecting to image.canon over Wi-Fi. • Try again to establish the Wi-Fi connection to image.canon. 132: Error detected on server Try again later The image.canon site is currently offline for maintenance.
Page 706 137: The QR code shown on the camera has expired. Try camera web link setup again. The QR code displayed has expired. • Reconfigure camera web link settings and scan the QR code displayed again on the camera. 141: Printer is busy. Try connecting again. Is the printer performing a printing process? •...
Page 707 Wireless Communication Function Precautions Distance between the camera and the smartphone Installation location of access point antenna Nearby electronic devices Precautions for using multiple cameras If the transmission rate drops, the connection is lost, or other problems occur when using the wireless communication functions, try the following corrective actions.
Page 708 Distance between the camera and the smartphone If the camera is too far from the smartphone, a Wi-Fi connection may not be established even when Bluetooth connection is possible. In this case, bring the camera and the smartphone closer together, then establish a Wi-Fi connection. Installation location of access point antenna When using indoors, install the device in the room where you are using the camera.
Page 709 Security If security settings have not been properly set, the following problems may occur. Transmission monitoring Third parties with malicious intent may monitor wireless LAN transmissions and attempt to acquire the data you are sending. Unauthorized network access Third parties with malicious intent may gain unauthorized access to the network you are using to steal, modify, or destroy information.
Page 710 Checking Network Settings Windows Open the Windows [Command Prompt], then enter ipconfig/all and press the <Enter> key. In addition to the IP address assigned to the computer, the subnet mask, gateway, and DNS server information are also displayed. macOS In macOS, open the [Terminal] application, enter ifconfig -a, and press the <Return> key. The IP address assigned to the computer is indicated in the [enX] item (X: number) next to [inet], in the format “***.***.***.***”.
Page 711 Wireless Communication Status Wireless communication status can be checked on the screen. Quick Control screen Information display screen during playback (1) Wi-Fi function (2) Wireless signal strength (3) Bluetooth function Screen Communication Status Wi-Fi Function Wireless Signal Strength Wi-Fi: Disable Not connected Wi-Fi: Enable Connecting...
Page 712 Bluetooth Function Indicator Bluetooth Function Connection Status Screen Bluetooth connected Other than [Disable] Bluetooth not connected Not displayed [Disable] Bluetooth not connected...
Page 713 Set-up This chapter describes menu settings on the set-up [ ] tab. to the right of titles indicates functions only available in Creative Zone modes (, <Tv>, <Av>, or <M>). • Tab Menus: Set-up • Folder Settings • File Numbering •...
Page 714 Tab Menus: Set-up Set-up 1 Select folder • Creating a Folder File numbering Format card Auto rotate rotate info Date/Time/Zone Language Set-up 2 Video system Mode guide Feature guide Beep Volume Power saving...
Page 715 Set-up 3 Screen/viewfinder display Screen brightness Viewfinder brightness Fine-tune VF color tone UI magnification HDMI resolution Set-up 4 Touch control Choose USB connection app...
Page 716 Set-up 5 Reset camera Custom shooting mode (C mode) Only displayed in < > mode. Battery info. Copyright information Manual/software URL Certification Logo Display Firmware...
Page 717 Folder Settings Creating a Folder Selecting a Folder You can freely create and select the folder where the captured images are to be saved. Creating a Folder Select [ : Select folder]. Select [Create folder].
Page 718 Select [OK].
Page 719 Selecting a Folder (1) Number of images in folder (2) Lowest file number (3) Folder name (4) Highest file number Select a folder on the folder selection screen. Captured images are stored in your selected folder. Note Folders A folder can contain up to 9999 images (file number 0001–9999). When a folder becomes full, a new folder with the folder number increased by one is created automatically.
Page 720 File Numbering Continuous Auto Reset Manual Reset The captured images saved in a folder are assigned a file number from 0001 to 9999. You can change how the image files are numbered. (Example) (1) File number Select [ : File numbering].
Page 721 Set the item. Select [Numbering]. Select [Continuous] or [Auto reset]. If you want to reset the file numbering, select [Manual reset] ( Select [OK] to create a new folder, and the file number will start with 0001. Caution If the file number in folder 999 reaches 9999, shooting will not be possible even if the card still has free space.
Page 722 Continuous For continuous file numbering regardless of switching cards or creating folders Even after you replace the card or create a new folder, the file numbering continues in sequence up to 9999. This is useful when you want to save images numbered anywhere between 0001 to 9999 on multiple cards or in multiple folders into one folder on a computer.
Page 723 Auto Reset For restarting file numbering from 0001 after switching cards or creating folders When you replace the card or create a folder, the file numbering restarts from 0001 for the new images saved. This is useful if you want to organize images by cards or folders. If the replacement card or existing folder already contains images recorded previously, the file numbering of the new images may continue from the file numbering of the existing images on the card or in the folder.
Page 724 Manual Reset For resetting file numbering to 0001 or starting from 0001 in new folders When you reset the file numbering manually, a new folder is created automatically and the file numbering of images saved to that folder starts from 0001. This is useful, for example, if you want to use different folders for the images taken yesterday and the ones taken today.
Page 725 Card Formatting If the card is new or was previously formatted (initialized) by another camera or computer, format the card with this camera. Caution When the card is formatted, all images and data on the card will be erased. Even protected images will be erased, so make sure there is nothing you need to keep.
Page 726 Format the card. Select [OK]. For low-level formatting, press the < > button to add a checkmark [ ] to [Low level format], then select [OK].
Page 727 Conditions requiring card formatting The card is new. The card was formatted by a different camera or a computer. The card is full of images or data. A card-related error is displayed ( Low-level formatting Perform low-level formatting if the card's writing or reading speed seems slow or if you want to totally erase the data on the card.
Page 728 Auto Rotate You can change the auto rotation setting that straightens images shot in vertical orientation when they are displayed. Select [ : Auto rotate].
Page 729 Select an option. Automatically rotates images for display on both the camera and computers. Automatically rotates images only for display on computers. Images are not automatically rotated. Caution Images captured with auto rotation set to [Off] will not rotate during playback even if you later set auto rotation to [On].
Page 730 Adding Orientation Information to Movies For movies recorded with the camera held vertically, orientation information indicating which side is up can be added automatically to enable playback in the same orientation on smartphones or other devices. Select [ : Add rotate info].
Page 731 Date/Time/Zone When you turn on the power for the first time or if the date/time/zone have been reset, follow these steps to set the time zone first. By setting the time zone first, you can simply adjust this setting as needed in the future and the date/time will be updated to match it.
Page 732 Use the < >< > keys to select the time zone, then press the < > button. If your time zone is not listed, press the < > button, then set the difference from UTC in [Time difference]. Use the < ><...
Page 733 Set daylight saving time. Set it as necessary. Select [ ] or [ ], then press the < > button. When the daylight saving time is set to [ ], the time set in step 3 will advance by 1 hour. If [ ] is set, the daylight saving time will be canceled and the time will go back by 1 hour.
Page 734 Language Select [ : Language Set the desired language.
Page 735 Video System Set the video system of any television used for display. This setting determines the frame rates available when you record movies. Select [ : Video system]. Select an option. For NTSC For areas where the TV system is NTSC (North America, Japan, South Korea, Mexico, etc.).
Page 736 Shooting Mode Guide A brief description of the shooting mode can be displayed when you switch shooting modes. The default setting is [Enable]. Select [ : Mode guide]. Select [Enable]. Turn the Mode dial. A description of the selected shooting mode will appear.
Page 737 Press the < > key. The rest of the description will appear. To clear the mode guide, press the < > button. In < >/< > mode, you can display the shooting mode selection screen.
Page 738 Feature Guide A brief description of functions and items can be displayed when you use Quick Control. Select [ : Feature guide]. Select an option.
Page 739 Sample screens (1) Feature guide Note To clear a description, either tap it or continue performing operations.
Page 740 Beeps Select [ : Beep]. Select an option. Enable The camera beeps after focusing and in response to touch operations. Disable Disables beeping for focusing, self-timer, shutter, and touch operations. Note By default, beeping volume for touch operations is set to [0] (...
Page 741 Volume The volume of camera sounds is adjustable. Select [ : Volume]. Set the option. Select an option, then use the < >< > keys to adjust the volume.
Page 742 Power Saving You can adjust the timing of when the screen dims and then turns off, when the camera turns off, and when the viewfinder turns off after the camera is left idle (Screen dimmer, Screen off, Auto power off, and Viewfinder off). Select [ : Power saving].
Page 743 Note [Screen dimmer] and [Screen off] apply while the shooting screen is displayed. These settings do not apply during menu display or image playback. The camera turns off during menu display or image playback after the time set in [Screen dimmer], [Screen off], and [Auto power off] elapses. To protect the screen, the screen turns off 30 min.
Page 744 Screen and Viewfinder Display You can specify to use the screen or viewfinder for display, to avoid accidentally activating the viewfinder sensor when the screen is open. Select [ : Screen/viewfinder display]. Select an option. AUTO1: Auto 1 ( : only screen) Always use the screen for display when it is open.
Page 745 Note You can also switch between viewfinder and screen display by pressing a button you have customized by assigning to switching. With this setting set to [AUTO1] or [AUTO2], the camera responds to the viewfinder sensor accordingly. With [AUTO1] set, the camera does not respond to the viewfinder sensor when the screen is open.
Page 746 Screen Brightness Select [ : Screen brightness]. Make the adjustment. Referring to the gray image, use the < >< > keys to adjust screen brightness, then press the < > button. Check the effect on the screen. Note To check the image's exposure, referring to the histogram is recommended (...
Page 747 Viewfinder Brightness Select [ : Viewfinder brightness]. Turn the < > dial and select either [Auto] or [Manual]. Auto Press the < > button. Check the effect in the viewfinder while shooting. Manual Use the < >< > key to adjust viewfinder brightness, then press the <...
Page 748 Fine-Tuning Viewfinder Color Tone Select [ : Fine-tune VF color tone]. Make the adjustment. Referring to the gray image, use the < > keys to adjust viewfinder color tone, then press the < > button. Check the effect in the viewfinder.
Page 749 UI Magnification You can magnify menu screens by double-tapping with two fingers. Double-tap again to restore the original display size. Select [ : UI magnification]. Select [Enable]. Caution Use camera controls when configuring menu functions with the display magnified. Touch-screen operations are not supported.
Page 750 HDMI Resolution Set the image output resolution used when the camera is connected to a television or external recording device with an HDMI cable. Select [ : HDMI resolution]. Select an option. Auto The images will automatically be displayed at the optimum resolution matching the connected television.
Page 751 Touch Control Select [ : Touch control]. Select an option. [Sensitive] makes the touch-screen panel more responsive than [Standard]. To disable touch operations, select [Disable]. Caution Precautions for touch-screen panel operations Do not use sharp objects such as fingernails or ballpoint pens for touch operations. Do not use wet fingers for touch operations.
Page 752 The resolution and frame rate of image output is 2K (1920×1080) at 30 fps. Canon app(s) for iPhone Select if you will use an iOS app. Connecting the camera to a smartphone requires a cable for this purpose. For details, refer to the Canon website.
Page 753 Caution For [Video calls/streaming], consider using an optional household power outlet accessory when using the camera over extended periods.
Page 754 Resetting the Camera The camera's settings for shooting functions and menu functions can be restored to their defaults. Select [ : Reset camera]. Select an option. Basic settings Restores default settings for camera shooting functions and menu settings. Other settings Settings for individual selected options can be reset.
Page 755 Caution Dots of light may appear in captured images or on the shooting screen if the sensor is affected by cosmic rays or similar factors. If so, it may help to reduce their appearance by doing one of the following with [Basic settings] selected: (1) Hold down the <...
Page 756 Custom Shooting Mode (C Mode) Automatic Update of Registered Settings Canceling Registered Custom Shooting Modes Current camera settings in [ ] or [ ] mode, such as shooting, menu, and Custom Function settings, can be registered in Custom shooting mode [ Select [ : Custom shooting mode (C mode)].
Page 757 Register the desired items. Select [OK]. Current camera settings are registered to the Custom shooting mode. Automatic Update of Registered Settings If you change a setting while shooting in Custom shooting mode, the mode can be automatically updated with the new setting (Auto update). To enable this automatic update, set [Auto update set.] to [Enable] in step 2.
Page 758 Canceling Registered Custom Shooting Modes If you select [Clear settings] in step 2, the settings of each mode can be restored to default settings, as they were before registration. Note You can also change shooting and menu settings in Custom shooting modes.
Page 759 (Green): Battery recharge performance is slightly degraded. (Red): Purchasing a new battery is recommended. Caution Using a genuine Canon Battery Pack LP-E17 is recommended. If you use batteries that are not genuine Canon products, the camera's full performance may not be attained or malfunction may result.
Page 760 Note If a battery communication error message is displayed, follow the instructions in the message.
Page 761 Copyright Information Checking the Copyright Information Deleting the Copyright Information When you set the copyright information, it will be recorded to the image as Exif information. Caution If the entry for “Author” or “Copyright” is long, it may not be displayed entirely when you select [Display copyright info.].
Page 762 Enter text. Use the < > keys to select a character, then press the < > button to enter it. By selecting [ ], you can change the input mode. Select [ ] to delete a character. Exit the setting. Press the <...
Page 763 Deleting the Copyright Information When you select [Delete copyright information] in step 2, you can delete the [Author] and [Copyright] information.
Page 764 Other Information Manual/software URL To download instruction manuals, select [ : Manual/software URL] and scan the displayed QR code with a smartphone. You can also use a computer to access the website at the URL displayed and download software. Certification Logo Display Select [ : Certification Logo Display] to display some of the logos of the camera's certifications.
Page 765 Custom Functions/My Menu You can fine-tune camera functions and change the functionality of buttons and dials to suit your shooting preferences. You can also add menu items and Custom Functions that you adjust frequently to My Menu tabs. • Tab Menus: Custom Functions •...
Page 766 Tab Menus: Custom Functions Custom Functions 1 ISO expansion Safety shift Custom Functions 2 Customize buttons Customize control ring Clear customized settings...
Page 767 Custom Functions 3 Release shutter w/o lens Retract lens on power off Custom Functions 4 Clear all Custom Func. (C.Fn) Selecting [ : Clear all Custom Func. (C.Fn)] clears all Custom Function settings.
Page 768 Custom Function Setting Items C.Fn1 C.Fn2 C.Fn3 C.Fn4 You can customize camera features on the [ ] tab to suit your shooting preferences. Any settings you change from default values are displayed in blue.
Page 769 C.Fn1 ISO expansion Makes “H” (equivalent to ISO 51200 in still photo shooting and ISO 25600 in movie recording) available as an ISO speed in manual selection. Note that “H” is not available with : Highlight tone priority] set to [Enable] or [Enhanced]. OFF: Disable ON: Enable Safety shift...
Page 770 C.Fn2 Customize buttons You can assign frequently used functions to camera buttons that are easy for you to use. Different functions, for use when shooting still photos or movies, can be assigned to the same button. Select [ : Customize buttons]. Select a camera control.
Page 771 Select a function to assign. Press the < > button to set it. You can configure advanced settings for functions labeled with [ Detail set.] in the lower left of the screen by pressing the < > button. Note : Customize buttons] settings are not cleared even if you select [ : Clear all Custom Func.
Page 772 Functions available for customization ●: Default ○: Available for customization : Metering and AF start ● ○ ○ : AF stop ○ ● : Set AF point to center ○ ○ ○ ○ ○ ○ ○ : Start/stop whole area AF tracking ○...
Page 773 Exposure ●: Default ○: Available for customization : Metering start* ○ : AE lock ○ ●* : AE lock (while button pressed)* ○ : AE lock/FE lock* ○ ●* : Exposure compensation ○ ○ ● ○ ○ ○ ○ : ISO speed ○...
Page 774 Image ●: Default ○: Available for customization : Image quality* ○ ○ ○ ○ ○ ○ ○ : One-touch image quality setting* ○ ○ ○ ○ ○ ○ ○ : One-touch image quality (hold)* ○ ○ ○ ○ ○ ○ ○...
Page 775 Movies ●: Default ○: Available for customization : Movie recording ● ○ ○ : Zebra* ○ ○ ○ ○ ○ : Pause Movie Servo AF* ○ ○ ○ ○ ○ ○ : Digital zoom* ○ ○ ○ ○ ○ ○ : Movie self-timer* ○...
Page 776 Operation ●: Default ○: Available for customization : Flash function settings* ○ ○ ○ ○ ○ ○ ○ ● : Quick flash group control* ○ ○ ○ ○ ○ ○ ○ ○ : Depth-of-field preview* ○ ○ ○ ○ ○ ○...
Page 777 : Power off ○ ○ ○ : Screen off ○ ○ ○ ○ ○ ○ ○ : Silent shutter function* ○ ○ ○ ○ ○ ○ ○ : Switch focus/control ring ○ ○ ○ ○ ○ ○ ○ : Switch between VF/screen ○...
Page 778 Customize control ring Frequently used functions can be assigned to the < > ring. Select [ : Customize control ring]. Select a camera control. Select a function to assign. Press the < > button to set it.
Page 779 Note : Customize control ring] settings are not cleared even if you select [ Clear all Custom Func. (C.Fn)]. To clear the settings, select [ : Clear customized settings].
Page 780 Functions available for the control ring ●: Default ○: Available for customization Function Select AF area ○ Select AF area (while holding metering button) ○ Change shutter speed ○ Change aperture value ○ Exposure compensation ○ Set ISO speed ○ Change shutter spd.
Page 781 Clear customized settings Select [ : Clear customized settings]. Select [OK]. [Customize buttons] and [Customize control ring] are restored to defaults.
Page 782 C.Fn3 Release shutter w/o lens You can specify whether shooting still photos or movies is possible without a lens attached. OFF: Disable ON: Enable Retract lens on power off You can set whether to retract gear-type STM lenses (such as RF35mm F1.8 Macro IS STM) automatically when the camera's power switch is set to <...
Page 783 C.Fn4 Clear all Custom Func. (C.Fn) Selecting [ : Clear all Custom Func. (C.Fn)] clears all Custom Function settings except [Customize buttons] and [Customize control ring]. Note To clear settings configured with [ : Customize buttons] and [ : Customize control ring], select [ : Clear customized settings].
Page 784 Tab Menus: My Menu Add My Menu tab Delete all My Menu tabs Delete all items Menu display...
Page 785 Registering My Menu Creating and Adding My Menu Tabs Registering Menu Items on My Menu Tabs My Menu Tab Settings Deleting All My Menu Tabs/Deleting All Items Menu Display Settings On the My Menu tab, you can register menu items and Custom Functions you often adjust.
Page 786 Creating and Adding My Menu Tabs Select [Add My Menu tab]. Select [OK]. You can create up to five My Menu tabs by repeating steps 1 and 2.
Page 787 Registering Menu Items on My Menu Tabs Select [MY MENU*: Configure]. Select [Select items to register]. Register the desired items. Select an item, then press the < > button. Select [OK] on the confirmation screen. You can register up to six items. To return to the screen in step 2, press the <...
Page 788 My Menu Tab Settings You can sort and delete items on the menu tab, and rename or delete the menu tab itself. Sort registered items You can change the order of the registered items in My Menu. Select [Sort registered items], select an item to rearrange, then press the <...
Page 789 Rename tab You can rename the My Menu tab from [MY MENU*]. Select [Rename tab]. Enter text. Use the < > keys to select a character, then press the < > button to enter it. By selecting [ ], you can change the input mode. Select [ ] to delete a character.
Page 790 Deleting All My Menu Tabs/Deleting All Items You can delete all the created My Menu tabs or My Menu items registered on them. Delete all My Menu tabs You can delete all My Menu tabs you created. When you select [Delete all My Menu tabs], all the tabs from [MY MENU1] to [MY MENU5] will be deleted and the [ ] tab will revert to its default.
Page 791 Menu Display Settings You can select [Menu display] to set the menu screen that is to appear first when you press the < > button. Normal display Displays the last displayed menu screen. Display from My Menu tab Displays with the [ ] tab selected.
Page 792 Reference This chapter provides reference information on camera features. • Importing Images to a Computer • Importing Images to a Smartphone • Using a USB Power Adapter to Charge/Power the Camera • Troubleshooting Guide • Error Codes • ISO Speed in Movie Recording •...
Page 793 Importing Images to a Computer Connecting to a Computer with an Interface Cable Using a Card Reader Connecting to a Computer via Wi-Fi You can use EOS software to import images from the camera to a computer. Connecting to a Computer with an Interface Cable Install EOS Utility ( Connect the camera to the computer.
Page 794 Using a Card Reader You can use a card reader to import images to a computer. Install Digital Photo Professional ( Insert the card into the card reader. Use Digital Photo Professional to import the images. Refer to the Digital Photo Professional Instruction Manual. Note When downloading images from the camera to a computer with a card reader without using EOS software, copy the DCIM folder on the card to the computer.
Page 795 Connecting to a Computer via Wi-Fi You can connect the camera to the computer via Wi-Fi and import images to the computer...
Page 796 When using AD-P1, refer to the instruction manual included with AD-P1. Use of a Canon USB cable (Interface Cable IFC-100U or IFC-400U) is recommended when connecting Android smartphones. For details on USB cables used to connect iPhones, visit the Canon...
Page 797 Using Camera Connect Install Camera Connect on the smartphone and start it. For details on installing Camera Connect, see “Installing Camera Connect on a Smartphone” ( Turn the camera on. Tap [Images on camera]. Select images displayed to import them to the smartphone.
Page 798 Using Smartphone Features Turn the camera on. Use the smartphone to import images. Android smartphones: In the [Files] menu, select [Canon Digital Camera ***], then import images in the DCIM folder. iPhones: Start the Photos app, then import images from the card.
Page 799 Using a USB Power Adapter to Charge/Power the Camera Using USB Power Adapter PD-E1 (sold separately), you can charge Battery Pack LP-E17 without removing it from the camera. The camera can also be powered. Charging Connect the USB power adapter. With the camera power switch set to <...
Page 800 Connect the power cord. Connect the power cord to the USB power adapter and plug the other end into a power outlet. Charging begins, and the access lamp (1) is lit in green. When charging is finished, the access lamp turns off. Supplying power To power the camera without charging batteries, set the camera power switch to <...
Page 801 If the problem persists, take the camera to the nearest Canon Service Center. The charging time required and the amount charged vary depending on ambient temperature and remaining capacity.
Page 802 (1) there is a problem with the battery charger or battery, or (2) communication with a non-Canon battery has failed. In the case of (1), unplug the charger, reinsert the battery, and wait a few minutes before plugging the charger in again. If the problem...
Page 803 In this case, unplug the power cord, reattach the battery, and wait a few minutes before plugging it in again. If the problem persists, take the camera to the nearest Canon Service Center. If batteries are hot or cold, the access lamp blinks in green and a protective circuit stops charging.
Page 804 [Battery communication error. Does this battery/do these batteries display the Canon logo?] is displayed. Do not use any battery packs other than a genuine Canon Battery Pack LP-E17. Remove and install the battery again ( If the electrical contacts are dirty, use a soft cloth to clean them.
Page 805 Shooting-related problems The lens cannot be attached. To attach EF or EF-S lenses, you will need a mount adapter. The camera cannot be used with EF-M lenses ( No images can be shot or recorded. Make sure the card is properly inserted ( Slide the card's write-protect switch to the Write/Erase setting ( If the card is full, replace the card or delete unnecessary images to make space Shooting is not possible if the AF point turns orange when you attempt to focus.
Page 806 Maximum burst listed in Maximum burst for continuous shooting [Approx.] is based on the standard Canon test card, and the actual maximum burst is higher for cards with faster writing speeds. For this reason, estimated maximum burst may differ from actual maximum burst.
Page 807 Expanded ISO speeds cannot be selected for still photo shooting. Set [ : ISO expansion] to [Enable] ( Check the [ISO speed] setting in [ ISO speed settings]. Expanded ISO speeds (H) are not available when [ : Highlight tone priority] is set to [Enable] or [Enhanced], even with [ : ISO expansion] set to [Enable].
Page 808 The Speedlite always fires at full output. Flash units other than EL/EX series Speedlites used in autoflash mode always fire at full output ( The flash always fires at full output when [Flash metering mode] in external flash Custom Function settings is set to [1:TTL] (autoflash) ( External flash exposure compensation cannot be set.
Page 809 The ISO speed cannot be set for movie recording. ISO speed is set automatically in [ ] recording mode. In [ ] mode, you can manually set the ISO speed ( The minimum speed in the ISO speed range is ISO 200 when [ : Highlight tone priority] is set to [Enable] or [Enhanced].
Page 810 The subject looks distorted during movie recording. If you move the camera to the left or right (panning) or shoot a moving subject, the image may look distorted. The problem may be more noticeable in time-lapse movie recording. Sound is not recorded in movies. Sound is not recorded in High Frame Rate movies.
Page 811 Problems with wireless features Cannot pair with a smartphone. Use a smartphone compliant with Bluetooth Specification Version 4.1 or later. Turn on Bluetooth from the smartphone settings screen. Pairing with the camera is not possible from the smartphone's Bluetooth settings screen. Install the dedicated app Camera Connect (free of charge) on the smartphone ( Pairing with a previously paired smartphone is not possible if pairing information registered for another camera remains on the smartphone.
Page 812 Operation problems Settings change when I switch from still photo shooting to movie recording or vice versa. Separate settings are retained for use when shooting still photos and recording movies. Touch operation is not possible. Make sure [ : Touch control] is set to [Standard] or [Sensitive] ( A camera button or dial does not work as expected.
Page 813 Display problems The menu screen shows fewer tabs and items. Tabs and items on the menu screen vary for still photos and movies. The display starts with [ ] My Menu, or the [ ] tab alone is displayed. [Menu display] on the [ ] tab is set to [Display from My Menu tab] or [Display only My Menu tab].
Page 814 Playback problems A red box is displayed on the image. : AF point disp.] is set to [Enable] ( During image playback, the AF points are not displayed. AF points are not displayed when the following types of images are played back: •...
Page 815 Movie playback stops by itself. Extended movie playback or movie playback under high ambient temperature may cause the camera's internal temperature to rise, and movie playback may stop automatically. If this happens, playback is disabled until the camera's internal temperature decreases, so turn off the power and let the camera cool down a while.
Page 816 Computer connection problems I cannot import images to a computer. Install EOS Utility (EOS software) on the computer ( Make sure the main EOS Utility window is displayed. If the camera is already connected via Wi-Fi, it cannot communicate with any computer connected with an interface cable.
Page 817 If you cannot remove the dirt or moisture, contact a Canon Service Center. If [Accessory unavailable status] is displayed, check the terminals of the multi-function...
Page 818 Error Codes (1) Error number (2) Cause and countermeasures If there is a problem with the camera, an error message will appear. Follow the on-screen instructions. If the problem persists, write down the error code (Err xx) and request service.
Page 819 ISO Speed in Movie Recording In [ ] mode ISO speed is set automatically in a range of ISO 100–12800. Setting [Max for Auto] in [ ISO speed settings] to [H (25600)] ( ) expands the maximum speed in the automatic setting range to H (equivalent to ISO 25600). The minimum speed in the automatic setting range is ISO 200 when [ : Highlight tone priority] is set to [Enable] or [Enhanced] (...
Page 820 Information Display Still Photo Shooting Screen Movie Recording Screen Scene Icons Playback Screen Still Photo Shooting Screen Each time you press the < > button, the information display will change. The display will show only the settings currently applied. (12) (13) (14) (15)
Page 821 Maximum burst Number of available shots/Sec. until self-timer shoots Focus bracketing/HDR shooting/Multi Shot Noise Reduction Shooting mode AF area AF operation Subject to detect Image quality Metering mode (10) Electronic level (11) AF point (1-point AF) (12) Number of remaining shots for focus bracketing (13) Movie recording time available (14)
Page 822 (24) (33) (25) (26) (34) (27) (35) (28) (36) (29) (37) (38) (30) (39) (31) (40) (32) (41) (24) AEB/FEB (25) View Assist (26) HDR PQ (27) Flash ready/FE lock/High-speed sync (28) Drive mode (29) Electronic shutter (30) AE lock (31) Shutter speed (32)
Page 823 Movie Recording Screen Each time you press the < > button, the information display will change. The display will show only the settings currently applied. (10) (11) (12) (13) (14) (15) (16) (17) Battery level Movie recording time available/Elapsed recording time Shooting mode AF area Subject to detect...
Page 824 (18) (26) (19) (27) (28) (20) (29) (21) (30) (22) (31) (23) (24) (32) (25) (33) (18) View Assist (19) HDR PQ (20) Audio recording level indicator (manual) (21) Movie self-timer (22) AE lock (23) Shutter speed (24) Overheat control (25) Aperture value (26)
Page 825 Note Other icons may be displayed temporarily after setting adjustments.
Page 826 Scene Icons In < > shooting mode, the camera detects the type of scene and sets all settings accordingly. The detected scene type is indicated in the upper left of the screen. People Subjects Other Than People Subject Background Color Nature/ In Motion* Outdoor...
Page 827 Playback Screen Basic information display for still photos (10) (11) (12) (13) (14) (15) (16) HDR output status/View Assist Bluetooth function Wi-Fi signal strength Wi-Fi function Battery level Current image no./Total images/No. of images found Shutter speed Aperture value Exposure compensation amount (10) Already sent to a computer/smartphone (11)
Page 828 Caution If the image was taken by another camera, certain shooting information may not be displayed. It may not be possible to play back images taken with this camera on other cameras.
Page 829 Detailed information display for still photos (10) (11) (12) (13) (14) (15) (16) (17) Aperture value Picture Style/Settings Shutter speed White balance correction/Bracketing Shooting mode/Frame Grab White balance Auto Lighting Optimizer First image of scene Image quality/Edited image/Cropping (10) Exposure compensation amount (11) Shooting date and time (12)
Page 830 Detailed information display for movies Movie playback Movie recording mode/High Frame Rate mode Movie recording size Frame rate Compression method Movie orientation information Recording time/Time code Movie recording format * For simplicity, explanations are omitted for items that are also included in basic/detailed information display for still photos, which are not shown here.
Page 831 Lens mount: Canon RF mount Compatible lenses: Canon RF lens group (including RF-S lenses) * Canon EF or EF-S lenses (except for EF-M lenses) are also compatible, using mount adapter EF-EOS R Lens focal length: Approx. 1.6 times the focal length indicated on the lens...
Page 832 Recording media Recording media SD/SDHC/SDXC memory cards UHS-I Supported UHS speed class Supported SD speed class Supported Card slot: Equipped with a single slot * Supports UHS-I Still photo recording Still photo pixel count Recorded pixels Image quality Aspect ratio 16:9 Approx.
Page 833 29.9 + 9.1 RAW+HEIF* 16.9 + 9.1 1180 * 1: Number of shots using a 32 GB card that conforms to Canon testing standards. * 2: When set to [HDR shooting : Disable]. * 3: When set to [HDR shooting : Enable].
Page 834 JPEG* HEIF* RAW* RAW+JPEG* RAW+HEIF* * 1: Number of shots using a 32 GB UHS-I card that conforms to Canon testing standards. * 2: When set to [HDR shooting : Disable]. * 3: When set to [HDR shooting : Enable].
Page 835 Movie recording Movie recording format: MP4 Estimated recording time, movie bit rate, and file size HDR PQ: OFF Total recording time Movie recording size (approx.) Movie bit File size rate Frame rate (Approx. (Approx. (fps) Compression MB/min.) Movie recording 32 GB Mbps) method NTSC...
Page 836 HDR PQ: ON Total recording time Movie recording size (approx.) Movie bit File size rate Frame rate (Approx. (Approx. (fps) Compression MB/min.) Movie recording 32 GB Mbps) method NTSC 1 hr. 6 hr. 1218 (Standard) min. min. min. 29.97 4K UHD 25.00 23.98 3 hr.
Page 837 Card performance requirements (movie recording) [write/read speed] Movie recording size SD card Frame rate (fps) Compression 10 bits Resolution 8 bits method (HDR PQ) NTSC IPB (Standard) UHS Speed Class 3 or higher 29.97 4K UHD 25.00 23.98 SD Speed Class UHS Speed IPB (Light) 10 or higher...
Page 838 (also applies during continuous shooting). * Automatically set to [AI Focus AF] in < > mode. Lens compatibility based on focusing area: Refer to the Canon website Number of AF area available for automatic selection Focusing area Horizontal: Approx.
Page 839 Viewfinder Type: OLED color electronic viewfinder Screen size: Approx. 1.00 cm (0.39 inch) Dot count: Approx. 2,360,000 dots Magnification / Angle of view: Approx. 0.95× / Approx. 28.0° (3:2 aspect ratio, with 50mm lens at infinity, –1 m –1 Coverage: Approx. 100% (at JPEG Large image quality, 3:2 aspect ratio, approx. 22 mm eyepoint) Eyepoint: Approx.
Page 840 Exposure control Metering functions under various shooting conditions Item Still photo shooting Movie recording Metering sensor 384-zone (24×16) metering using image sensor output signals Evaluative metering Partial metering * Approx. 5.8% in the center of the screen* Metering mode Spot metering* * Approx.
Page 841 ISO Auto details for still photos Shooting mode Using flash No flash Variable control of maximum ISO Compatible lens Incompatible lens Auto limit for E-TTL P / Tv / Av / M ISO 100* –32000* ISO 100* –6400* ISO 100* –1600* (other than bulb) Creative Zone...
Page 842 ISO speed (recommended exposure index) in movie recording Manual ISO speed setting for movies ISO speed Normal ISO speed ISO 100–12800 (in 1/3- or 1-stop increments) Expanded ISO speed H (equivalent to ISO 16000 / 20000 / 25600) * When set to [Highlight tone priority], the setting range is ISO 200–12800. * Expanded ISO speeds are not available in HDR PQ movie, HDR movie, or High Frame Rate movie recording.
Page 843 Shutter Still photo shooting Type: Electronically controlled focal-plane shutter Rolling shutter, using the image sensor Shutter mode Shutter mode Flash photography Electronic 1st-curtain Possible Electronic shutter Disabled Shutter speed / X-sync speed Shutter mode Setting range Setting increments X-sync Electronic 1st-curtain 1/4000–30 sec., Bulb 1/250 sec.
Page 844 Drive Drive mode and continuous shooting speed [Max. approx.] Drive mode AF operation Electronic 1st-curtain Electronic shutter Single shooting High-speed continuous One-Shot AF 12 shots/sec.* 15 shots/sec.* shooting + Servo AF High-speed continuous One-Shot AF 7.6 shots/sec.* 15 shots/sec.* shooting Servo AF Low-speed continuous One-Shot AF...
Page 845 Built-in flash Type: Retractable flash Retraction method: Manual Guide no.: Guide no. of approx. 6 (ISO 100/m) / 19.7 (ISO 100/feet) Flash exposure compensation: ±2 stops (in 1/3-stop increments) Effective flash range (example) (Approx.) Lens: RF-S18-45mm F4.5-6.3 IS STM ISO speed Wide-angle end f/4.5 Telephoto end f/6.3 0.3–1.2...
Page 846 Playback Item Still photos Movies AF point display Playback grid Off / 3×3 / 6×4 / 3×3+diag Magnified view 1.5×–10× (15 levels) Search conditions Setting image search conditions Rating / Date / Folder / Protection / Type of file (1) / Type of file (2) OFF / ★...
Page 847 On-screen shooting * 1: Based on CIPA standards. * 2: According to Canon measurement conditions, which are based on CIPA standards. * Using a new, fully charged LP-E17 * The number of shots available may vary greatly depending on the shooting environment.
Page 848 Available operating time Available operating Conditions of use Temperature time Time available for bulb exposure +23°C / 73°F Approx. 2 hr. 50 min. Time available for Live View shooting +23°C / 73°F Approx. 3 hr. 00 min. * Using the screen +23°C / 73°F Approx.
Page 849 Dimensions and weight Dimensions Dimensions Exterior color (W) × (H) × (D) Black Approx. 116.3 × 85.5 × 68.8 mm / 4.58 × 3.37 × 2.71 in. White * Based on CIPA guidelines. Weight Exterior color Weight Black Approx. 375 g / Approx. 13.23 oz. Body (including battery and card)* White...
Page 850 Standards compliance: Bluetooth Specification Version 4.2 compliant (Bluetooth Low Energy technology) Transmission method: GFSK modulation All data above is based on Canon testing standards and CIPA (Camera & Imaging Products Association) testing standards and guidelines. Dimensions and weight listed above are based on CIPA Guidelines (except weight for camera body only).
Page 851 ® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Canon Inc. is under license. Other trademarks and trade names are those of their respective owners. USB Type-C™ and USB-C™ are trademarks of USB Implementers Forum.
Page 852 About MPEG-4 Licensing “This product is licensed under AT&T patents for the MPEG-4 standard and may be used for encoding MPEG-4 compliant video and/or decoding MPEG-4 compliant video that was encoded only (1) for a personal and non-commercial purpose or (2) by a video provider licensed under the AT&T patents to provide MPEG-4 compliant video.
Page 853 This product is designed to achieve optimum performance when used with genuine Canon accessories. Therefore, using this product with genuine accessories is highly recommended. Canon shall not be liable for any damage to this product and/or accidents such as malfunction, fire, etc. caused by the failure of non-genuine Canon accessories (e.g., a leakage and/or explosion of a battery).

Canon EOS R50 Instruction Manual

Table of Contents

Advanced User Guide

Quick Links

Chapters

Related Manuals for Canon EOS R50

Summary of Contents for Canon EOS R50