Table of Contents
Related Manuals for Siemens WG54G2APDN
Summary of Contents for Siemens WG54G2APDN
- Page 1 Washing machine WG54G2APDN User manual and installation instructions Register your product on My Siemens and discover exclusive services and offers. siemens-home.bsh-group.com/welcome The future moving in. Siemens Home Appliances...
-
Page 2: Table Of Contents
Futher information and explanations are available online: Table of contents 1 Safety .......... 4 7 Display ........ 20 1.1 General information.... 4 8 Buttons ........ 23 1.2 Intended use....... 4 1.3 Restriction on user group... 4 9 Programmes ....... 25 1.4 Safe installation ...... 5 10 Accessories...... - Page 3 14 Childproof lock...... 33 14.1 Activating the childproof lock ......... 33 14.2 Deactivating the childproof lock ......... 33 15 Intelligent dosing system .. 33 15.1 Starting the programme with intelligent dosing sys- tem ......... 33 15.2 Filling the dispensers ..... 34 15.3 Basic dosage ...... 35 16 Basic settings......
-
Page 4: Safety
en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡... -
Page 5: Safe Installation
Safety en 1.4 Safe installation WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Connect the appliance to a power supply with alternating cur- rent only via a properly installed socket with earthing. ▶... - Page 6 en Safety WARNING ‒ Risk of injury! The high weight of the appliance may result in injury when lifted. ▶ Do not lift the appliance on your own. If this appliance is not correctly installed in a washer-dryer stack, the installed appliance may fall. ▶...
-
Page 7: Safe Use
Safety en ▶ Wear protective gloves when installing and transporting the ap- pliance. 1.5 Safe use WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous. ▶ Never operate a damaged appliance. ▶ Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains. - Page 8 en Safety WARNING ‒ Risk of poisoning! Detergents and care products may result in poisoning if con- sumed. ▶ If accidentally swallowed, seek medical advice. ▶ Keep detergents and care products out of the reach of children. WARNING ‒ Risk of explosion! Laundry that has been pretreated with cleaning agents that con- tain solvents may cause an explosion in the appliance.
-
Page 9: Safe Cleaning And Maintenance
Safety en 1.6 Safe cleaning and maintenance WARNING ‒ Risk of electric shock! Incorrect repairs are dangerous. ▶ Repairs to the appliance should only be carried out by trained specialist staff. ▶ Only use genuine spare parts when repairing the appliance. ▶ If the power cord of this appliance is damaged, it must be re- placed by the manufacturer, the manufacturer's Customer Ser- vice or a similarly qualified person in order to prevent any risk. -
Page 10: Preventing Material Damage
en Preventing material damage If the water pressure is too high or 2 Preventing material too low, the appliance may not be able to operate properly. damage Ensure that the water pressure in ▶ the water supply system is at least ATTENTION! 100 kPa (1 bar) and max. -
Page 11: Environmental Protection And Saving Energy
Environmental protection and saving energy en Set the maximum spin speed if you 3 Environmental protec- want to dry the laundry in the tumble tion and saving energy dryer afterwards. a The drier the laundry, the shorter the programme duration when dry- 3.1 Disposing of packaging ing which, in turn, reduces energy consumption. -
Page 12: Installation And Connection
en Installation and connection Replace the accessories in ques- ▶ 4 Installation and con- tion before operating the appli- ance. nection → "Accessories", Page 29 Note: The appliance has been tested 4.1 Unpacking the appliance at the factory to check it is in working order. As a result, water stains may ATTENTION! remain in the appliance. - Page 13 Installation and connection en ATTENTION! Installation loca- Requirements If residual water in the appliance tion freezes, this may cause damage to Against a wall Do not trap the the appliance. power cord or Do not install or operate this appli- ▶ the hoses ance anywhere that is liable to ex- between the wall...
-
Page 14: Connecting The Appliance
en Installation and connection Unscrew and remove all the Put on the 4 cover caps. screws for the 4 transit bolts with a WAF 13 wrench. Push the 4 cover caps downwards. Remove the power cable from the holder. Note: To install the transport locks to transport the appliance, perform these steps again in the reverse or- Remove the 4 sleeves. -
Page 15: Aligning The Appliance
Installation and connection en Connect the water inlet hose to a Siphon Secure the con- tap (26.4 mm = 3/4"). nection point with a (24–40 mm) hose clamp. Sink Fix and secure the water outlet hose with an el- → Page 29. When connecting to a 21 mm = ½" Plastic pipe with Fix and secure tap, first fit the adapter with a seal-... -
Page 16: Connecting The Appliance To The Electricity Supply
en Installation and connection To align the appliance, turn the ap- The connection details of the appli- pliance feet. Check that the appli- ance can be found under Tech- ance is level using a spirit level. nical data → Page 55. Check the mains plug is inserted properly. -
Page 17: Familiarising Yourself With Your Appliance
Familiarising yourself with your appliance en 5 Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured. 5.2 Detergent drawer Maintenance flap for the drain pump → Page 39 Note: Observe the manufacturer's in-... -
Page 18: Control Panel
en Familiarising yourself with your appliance Manual dosing compartment : Dispenser for fabric softener : Dispenser for liquid deter- gent 5.3 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. Programmes → Page 25 Programme selector → Page 30... -
Page 19: Before Using For The First Time
first time en Add washing powder to the first time 6 Before using for the manual dosing compartment. first time Prepare the appliance for use. first time 6.1 Starting an empty wash- ing cycle Your appliance was inspected thor- oughly before leaving the factory. To remove any residual water, run the first wash cycle without any laundry. -
Page 20: Display
en Display 7 Display The display shows the current settings, options or relevant information. Example: Display Display Designation More information 0:40 Programme dura- Expected programme duration or pro- tion/programme gramme time remaining in hours and time remaining minutes. Programme end → "Buttons", Page 23 time 10.0 Recommended... - Page 21 Display en Display Designation More information varioSpeed Short wash activated. → "Buttons", Page 23 Blood The stain type is activated. Grass The stain type is activated. Red Wine The stain type is activated. Grease and oil The stain type is activated. Reminder to clean Flashes: Drum is dirty.
- Page 22 en Display Display Designation More information Door ¡ Lights up: The door is locked and can- not be opened. ¡ Flashes: The door is not closed prop- erly. ¡ Off: The door is unlocked and can be opened. ¡ No water pressure. ¡...
-
Page 23: Buttons
Buttons en 8 Buttons The selection of programme settings depends on the programme that is set. Button Selection More information (Start/Reload) ¡ Start Start, cancel or pause the pro- gramme. ¡ Cancel ¡ Pause ¡ Activate Activate or deactivate a shorter pro- (Speed Perfect) gramme duration. - Page 24 en Buttons Button Selection More information (Prewash) ¡ Activate Activate or deactivate prewash, e.g. for washing heavily soiled laundry. ¡ Deactivate Note: If the intelligent dosing system is activated, the detergent will be dis- pensed automatically for the prewash and the main wash. If the intelligent dosing system is de- activated, place the detergent for the prewash directly in the drum.
-
Page 25: Programmes
Programmes en 9 Programmes Note: The laundry's care labels provide you with additional information on pro- gramme selection. Programme Description Max. load (kg) Bomuld Wash hard-wearing items made from cotton, linen 10.0 (Cotton) or blended fabrics. Also suitable as a short programme for normally soiled laundry when you activate Programme setting: ¡... - Page 26 en Programmes Programme Description Max. load (kg) ¡ Max. 1400 rpm Finvask/Silke Wash delicate, washable items made from silk, vis- (Delicate/Silk) cose and synthetic fabrics. Use a detergent that is suitable for delicates or silk. Note: Wash especially delicate items or items with hooks, eyelets or clips in a mesh laundry bag.
- Page 27 Programmes en Programme Description Max. load (kg) Skjorter Wash non-iron shirts and blouses made from cot- (Shirts) ton, linen, or synthetic or blended fabrics. Tip: In order to avoid creasing in your laundry, you can activate . The laundry is only given a short spin and can be removed while still dripping wet.
-
Page 28: Laundry
en Programmes Programme Description Max. load (kg) Halve the amount of detergent to avoid foaming. Do not use fabric softener. Do not use liquid detergent or detergent that is in- tended for woollens or delicates. Note: The drum cleaning indicator flashes to re- mind you if you have not used a programme at 60 °C or higher for a long time. -
Page 29: Preparing The Laundry
Accessories en 10 Accessories Use original accessories. These have been made especially for your appli- ance. Note: Some accessories are avail- able in other colours. Contact → "Customer Service", Page 54. Order number Water inlet hose exten- Extend the water inlet WZ10131 sion hose for cold water or AquaStop (approx. -
Page 30: Detergents And Care
en Detergents and care products Turn the programme selector and 12 Detergents and care set the required programme. → "Programmes", Page 25 products If required, adjust the programme The manufacturer's instructions for settings. use and dosage can be found on the → "Adjusting the programme set- packaging. -
Page 31: Inserting The Measuring Aid For Liquid Detergent
operation en Fold the measuring aid down and 13.5 Inserting the measuring click it into place. aid for liquid detergent If you order the measuring aid as an accessory, you must use the measur- ing aid. Pull out the detergent drawer. Press down on the insert and re- move the detergent drawer. -
Page 32: Adding Laundry
en operation a The display shows the programme 13.11 Resuming the pro- duration or the programme end gramme when the pro- time. gramme status is Rinse a After the programme has ended, the display shows: End. Hold Requirements 13.9 Adding laundry ¡ Rinse Stop is activated. ¡... -
Page 33: Childproof Lock
Childproof lock en This function is available depending 14 Childproof lock on the selected programme and is activated automatically. Secure your appliance against being Note operated unintentionally using the If you are using the intelligent dosing controls. system, do not add additional deter- gent or fabric softener into the com- 14.1 Activating the childproof partment for manual dosing. -
Page 34: Filling The Dispensers
en Intelligent dosing system To replace the contents of the dis- Open the dispenser cover. penser with another product, clean the detergent drawer. → "Cleaning the detergent drawer", Page 37 If required, adjust the contents of the dispenser. If required, adjust the basic dosage → Page 35. -
Page 35: Basic Dosage
Intelligent dosing system en 15.3 Basic dosage The basic dosage depends on the manufacturer's instructions for the de- tergent, the water hardness and the degree of soiling of the laundry. Always set a basic dosage that cor- responds to the dosage for a stand- ard load of 4.5 kg. -
Page 36: Basic Settings
en Basic settings 16 Basic settings You can configure the basic settings for your appliance to meet your needs. 16.1 Overview of the basic settings Basic setting Programme Value Description position End signal 0 (off) Set the volume of the signal at the 1 (quiet) end of the programme. -
Page 37: Changing The Basic Set- Tings
Cleaning and servicing en 16.2 Changing the basic set- 17 Cleaning and servi- tings cing Set the programme selector to po- To keep your appliance working effi- sition 1. ciently for a long time, it is important to clean and maintain it carefully. 17.1 Cleaning the drum CAUTION Risk of injury! - Page 38 en Cleaning and servicing Switch off the appliance. Empty the detergent drawer. → "Switching off the appliance", Page 32 Pull out the detergent drawer. Press down on the insert and re- move the detergent drawer. Clean the pump unit with a damp cloth. Remove the pump unit.
-
Page 39: Cleaning The Drain Pump
Cleaning and servicing en Switch off the appliance. → "Switching off the appliance", Page 32 Disconnect the appliance's mains plug from the power supply. Open and remove the service flap. Slide a sufficiently large container under the opening. Clean the housing of the detergent drawer in the appliance. - Page 40 en Cleaning and servicing Cleaning the drain pump CAUTION - Risk of scalding! When you wash at high temperat- Requirement: The drain pump is ures, the detergent solution gets empty. → Page 39 hot. Since water may remain in the Do not touch the hot detergent ▶...
- Page 41 Cleaning and servicing en Insert the pump cap. Insert and close the service flap. Ensure that the parts of the ‒ pump cap are correctly as- sembled. Before the next wash To prevent unused detergent from flowing straight into the outlet in the Screw the pump cap as far as it next wash, run a suitable programme will go.
-
Page 42: Troubleshooting
en Troubleshooting 18 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶... - Page 43 Troubleshooting en Fault Cause and troubleshooting "E:30 / -80" Unapproved extension installed on the water drain hose. Remove any unapproved extensions from the water ▶ hose. → "Connecting the appliance", Page 14 The pump cap is not fully screwed in. Ensure that the pump cap is screwed in all the way ▶...
- Page 44 en Troubleshooting Fault Cause and troubleshooting "E:30 / -10" and/or First wait approx. 5 minutes until the drain process ends. To reset the error message, switch the appliance off. Switch the appliance back on. If the error message is displayed again, call cus- tomer service.
- Page 45 Troubleshooting en Fault Cause and troubleshooting "E:30/-20" Detergent dosage is too high. If you dose manually, reduce the amount of deter- ▶ gent for the next washing cycle with the same load. Additional water is added. Do not add any extra water to the appliance while it ▶...
- Page 46 en Troubleshooting Fault Cause and troubleshooting The programme does Note: You can deactivate and manually dose the intel- not start. ligent dosing system until the fault is rectified. → "Buttons", Page 23 The detergent drawer has not been pushed in fully. Push in the detergent drawer until the symbol goes ▶...
- Page 47 Troubleshooting en Fault Cause and troubleshooting The water is not drain- Remove any unapproved extensions from the water ▶ ing. hose. → "Connecting the appliance", Page 14 The pump cap is not fully screwed in. Ensure that the pump cap is screwed in all the way ▶...
- Page 48 en Troubleshooting Fault Cause and troubleshooting Drum jerks after the This is caused by an internal motor test. programme starts. Not a fault – no action required. ▶ Vibrations and move- Appliance is not correctly aligned. ment of the appliance → "Aligning the appliance", Page 15 ▶...
- Page 49 Troubleshooting en Fault Cause and troubleshooting High spin speed not Note: Where possible, mix large and small items in reached. the drum. Different sized items of laundry distribute themselves better during the spin cycle. Start the Centrifugering programme. ▶ The spin programme Drain pipe or water outlet hose is blocked. does not start.
- Page 50 en Troubleshooting Fault Cause and troubleshooting Creasing. The spin speed is too high. The next time you run a wash cycle, set a lower ▶ spin speed. The load is too large. The next time you run a wash cycle, reduce the ▶...
- Page 51 Troubleshooting en Fault Cause and troubleshooting Detergent residue on Unsuitable detergent added to the dispenser of the in- the damp washing. telligent dosing system. Check whether the detergent used is suitable. → "Detergents and care products", Page 30 Drain the dispenser. → "Cleaning the detergent drawer", Page 37 Clean the dispenser.
- Page 52 en Troubleshooting Fault Cause and troubleshooting Insufficient cleaning. Check whether the detergent used is suitable. → "Detergents and care products", Page 30 Drain the dispenser. → "Cleaning the detergent drawer", Page 37 Clean the dispenser. Refill the dispenser. → "Filling the dispensers", Page 34 Water is leaking out at Water inlet hose is not correctly/securely connected.
-
Page 53: Emergency Release
Transportation, storage and disposal en 18.1 Emergency release 19.2 Inserting the transit bolts Releasing the door Secure the appliance before trans- Requirement: The drain pump is portation using transit bolts in order empty. → Page 39 to prevent transport damage. ATTENTION! Escaping water may Use a screwdriver to remove the 4 cause material damage. -
Page 54: Disposing Of Old Appliance
en Customer Service 19.4 Disposing of old appli- 20 Customer Service ance Function-relevant genuine spare parts Valuable raw materials can be re- according to the corresponding Eco- used by recycling. design Order can be obtained from Customer Service for a period of at WARNING least 10 years from the date on Risk of harm to health! -
Page 55: Consumption Values
Consumption values en 21 Consumption values The following information is provided in accordance with the EU Ecodesign Regulation. The values given for programs other than the Eco 40-60 are indicat- ive only and were determined in accordance with the applicable standard EN60456. The automatic dosing function has been deactivated for this pur- pose. - Page 56 en Technical data Mains voltage 220-240 V, Length of the wa- 150 cm 50-60 Hz ter outlet hose Minimum in- Length of the 210 cm stallation protec- power cord tion You can find more information about Nominal power 2300 W your model online at https:// eprel.ec.europa.eu/ .
- Page 60 Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd. Grand Union House Old Wolverton Road Wolverton, Milton Keynes MK12 5PT United Kingdom Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG *9001800522* 9001800522 (021115)