Page 2
Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.
Contents Safety information ....................... v About this guide ......................vi ROG STRIX Z690-A GAMING WIFI specifications summary ......... vii Package contents ...................... xii Installation tools and components ................. xiii Chapter 1: Product Introduction Before you proceed ................... 1-1 Motherboard layout ..................1-2...
Page 4
Appendix Notices ........................A-1 Warranty ........................A-8 ASUS contact information ..................A-10 Service and Support ..................... A-10...
Safety information Electrical safety • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.
Refer to the following sources for additional information and for product and software updates. ASUS website The ASUS website (www.asus.com) provides updated information on ASUS hardware and software products. Optional documentation Your product package may include optional documentation, such as warranty flyers, that may have been added by your dealer.
Extreme Memory Profile (XMP) ® OptiMem II * Actual memory data rate support depends on the CPU types and DRAM modules, for more information refer to www.asus.com for the Memory QVL (Qualified Vendors Lists). 1 x DisplayPort** 1 x HDMI port*** ®...
Page 8
ROG STRIX Z690-A GAMING WIFI specifications summary 1 x Intel 2.5Gb Ethernet ® Ethernet ASUS LANGuard Wi-Fi 6E 2x2 Wi-Fi 6E (802.11 a/b/g/n/ac/ax) Supports 2.4/5/6GHz frequency band* Wireless & Bluetooth Bluetooth v5.2 * WiFi 6E 6GHz regulatory may vary between countries, and function will be ready in Windows 11 or later.
Page 9
ROG STRIX Z690-A GAMING WIFI specifications summary Fan and Cooling related 1 x 4-pin CPU Fan header(s) 1 x 4-pin CPU OPT Fan header(s) 1 x 4-pin AIO Pump header(s) 5 x 4-pin Chassis Fan header(s) Power related 1 x 24-pin Main Power connector...
Page 10
AURA Sync - AURA RGB header - Addressable Gen 2 RGB headers ASUS HYDRANODE - 1 x Chassis fan support* (CHA_FAN1P) * Visit ASUS Website for the latest compatibility list. TPM header ROG Exclusive Software - GameFirst VI - ROG CPU-Z...
Page 11
Form Factor 12 inch x 9.6 inch ( 30.5 cm x 24.4 cm ) • Specifications are subject to change without notice. Please refer to the ASUS website for the latest specifications. • MyASUS offers a variety of support features such as helping to troubleshoot issues, optimizing product performance, integrating ASUS software, and recovery drive creation.
Package contents Check your motherboard package for the following items. Motherboard 1 x ROG STRIX Z690-A GAMING WIFI motherboard Cables 4 x SATA 6Gb/s cables 1 x ASUS Wi-Fi moving antennas 1 x Cable ties pack 1 x M.2 Rubber Package 1 x M.2 Q-Latch package...
Installation tools and components Phillips (cross) screwdriver PC chassis Power supply unit Intel LGA 1700 CPU Intel LGA 1700 compatible CPU Fan ® ® DDR5 DIMM SATA hard disk drive SATA optical disc drive (optional) Graphics card (optional) M.2 SSD module (optional) 1 Bag of screws The tools and components in the table above are not included in the motherboard package.
Failure to do so may cause severe damage to the motherboard, peripherals, or components. The pin definitions in this chapter are for reference only. The pin names depend on the location of the header/jumper/connector. ROG STRIX Z690-A GAMING WIFI...
Contact your retailer immediately if the PnP cap is missing, or if you see any damage to the PnP cap/socket contacts/motherboard components. ASUS will shoulder the cost of repair only if the damage is shipment/ transit-related.
(Double Data Rate 5) memory modules. A DDR5 memory module is notched differently from a DDR, DDR2, DDR3 or DDR4 module. DO NOT install a DDR, DDR2, DDR3, or DDR4 memory module to the DDR5 slot. Recommended memory configurations ROG STRIX Z690-A GAMING WIFI...
Page 20
(D/C) from the same vendor. Check with the vendor to get the correct memory modules. • Visit the ASUS website for the latest QVL. Chapter 1: Product Introduction...
Expansion slots Unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components. ROG STRIX Z690-A GAMING WIFI...
Fan and Pump headers The Fan and Pump headers allow you to connect fans or pumps to cool the system. When an ASUS HYDRANODE fan is connected to a ASUS HYDRANODE fan connector, the ASUS HYDRANODE function will be available.
• If you want to use two or more high-end PCI Express x16 cards, use a PSU with 1000W power or above to ensure the system stability. ROG STRIX Z690-A GAMING WIFI...
M.2 slot The M.2 slot allows you to install M.2 devices such as M.2 SSD modules. • Intel ® Gen Processors: - M.2_1 supports PCIE 4.0 x4 mode M Key design and type 2242 / 2260 / 2280 / 22110 storage devices. •...
Z690 chipset. ® • RAID configuration is not supported on the SATA6G_E1-2 ports. Before creating a RAID set, refer to the RAID Configuration Guide. You can download the RAID Configuration Guide from the ASUS website. ROG STRIX Z690-A GAMING WIFI 1-11...
USB 3.2 Gen 2x2 Type-C Front Panel connector ® The USB 3.2 Gen 2x2 Type-C connector allows you to connect a USB 3.2 Gen 2x2 ® Type-C module for an additional USB 3.2 Gen 2x2 Type-C port on the front panel. ®...
2.0 ports. The USB 2.0 header provides data transfer speeds of up to 480 Mb/s connection speed. DO NOT connect a 1394 cable to the USB connectors. Doing so will damage the motherboard! The USB 2.0 module is purchased separately. ROG STRIX Z690-A GAMING WIFI 1-13...
Addressable Gen2 header The Addressable Gen2 header allows you to connect individually addressable RGB WS2812B LED strips or WS2812B based LED strips. The Addressable Gen2 header supports WS2812B addressable RGB LED strips (5V/ Data/Ground), with a maximum power rating of 3A (5V), and the addressable headers on this board can handle a combined maximum of 500 LEDs.
RGB LED strip is connected in the correct orientation, and the 12V connector is aligned with the 12V header on the motherboard. • The LED strip will only light up when the system is powered on. • The LED strip is purchased separately. ROG STRIX Z690-A GAMING WIFI 1-15...
CPU Over Voltage jumper The CPU Over Voltage jumper allows you to set a higher CPU voltage for a flexible overclocking system (depending on the type of the installed CPU). Set to pins 2-3 to increase the CPU voltage setting, or set to pins 1-2 to use the default CPU voltage setting.
S/PDIF Out header The S/PDIF Out header allows you to connect the Sony/Philips Digital Interface (S/ PDIF) Out module. The S/PDIF module is purchased separately. ROG STRIX Z690-A GAMING WIFI 1-17...
System Panel header The System Panel header supports several chassis-mounted functions. • System Power LED header (PLED) The 2-pin and/or 3-1 pin headers allow you to connect the System Power LED. The System Power LED lights up when the system is connected to a power source, or when you turn on the system power, and blinks when the system is in sleep mode.
Connect the thermal sensor and place it on the device or the motherboard’s component to detect its temperature. The thermal sensor is purchased separately. ROG STRIX Z690-A GAMING WIFI 1-19...
Thunderbolt™ header The Thunderbolt™ header allows you to connect an add-on Thunderbolt™ I/O card that supports Intel®’s Thunderbolt™ Technology, allowing you to connect Thunderbolt™-enabled devices to form a daisy-chain configuration. • The add-on Thunderbolt™ I/O card and Thunderbolt™ cables are purchased separately.
The TPM header allows you to connect a TPM module, which securely stores keys, digital certificates, passwords, and data. A TPM system also helps enhance network security, protect digital identities, and ensures platform integrity. The TPM module is purchased separately. ROG STRIX Z690-A GAMING WIFI 1-21...
Q-LEDs The Q-LEDs check key components (CPU, DRAM, VGA, and booting devices) during the motherboard booting process. If an error is found, the critical component’s LED stays lit up until the problem is solved. The Q-LEDs provide the most probable cause of an error code as a starting point for troubleshooting.
CPU designed for LGA1155, LGA1156, LGA1151, and LGA1200 sockets on the LGA1700 socket. • ASUS will not cover damages resulting from incorrect CPU installation/removal, incorrect CPU orientation/placement, or other damages resulting from negligence by the user. Take caution when lifting the load...
Page 38
Ensure to remove the CPU Socket lever protector on the lever latch before locking the lever latch under the retention tab. Failure to do so may cause damages to your system when installing the cooling system. Chapter 2: Basic Installation...
Ensure to remove the CPU Socket lever protector on the lever latch before installing the cooling system, failure to do so may cause damages to your system. To install a CPU heatsink and fan assembly ROG STRIX Z690-A GAMING WIFI...
Page 40
Intel ® 600 series motherboard. • Additional holes for LGA1200 compatible cooling systems are also available on ASUS’ Intel 600 series motherboards, ® however, we still strongly advise consulting with your cooling system vendor or manufacturer on the compatibility and...
Page 41
• If you wish to install an AIO cooler, we recommend installing the AIO cooler after installing the motherboard into the chassis. AIO_PUMP CPU_FAN CPU_OPT ROG STRIX Z690-A GAMING WIFI...
If the thermal pad on the M.2 heatsink becomes damaged and needs to replaced, we recommend replacing it with a thermal pad with a thickness of 1.25mm. • The M.2 is purchased separately. Loosen the screws from the M.2 heatsinks. Lift and remove the heatsinks. ROG STRIX Z690-A GAMING WIFI...
Page 44
Install your M.2 to your M.2 slot. The steps may differ between installing M.2 of different lengths, please refer to the different types and their installation steps below: • To install an M.2 to M.2_1 slot For 22110 length A. Remove the pre-installed M.2 Q-latch at the 2280 length screw hole by rotating the handle counterclockwise then pushing it towards the M.2 slot and removing it from the latch hole.
Page 45
M.2 slot. B. Remove the plastic film from the thermal pad. C. Install your M.2 to the M.2 slot. D. Rotate the M.2 Q-Latch clockwise to secure the M.2 in place. ROG STRIX Z690-A GAMING WIFI...
Page 46
For 2242 and 2260 length A. Remove the pre-installed M.2 Q-latch at the 2280 length screw hole by rotating the handle counterclockwise then pushing it towards the M.2 slot and removing it from the latch hole. B. Remove the plastic film from the thermal pad. C.
Page 47
C. Rotate and adjust the M.2 Q-latch so that the handle points away from the M.2 slot. D. Install your M.2 to the M.2 slot. E. Rotate the M.2 Q-Latch clockwise to secure the M.2 in place. OPTIONAL ROG STRIX Z690-A GAMING WIFI 2-11...
Page 48
For 2242, 2260 length A. (optional) Remove the M.2 rubber pad. Follow this step only if you wish to install an M.2 to type 2242. B. (optional) If required, remove the pre-installed removable M.2 Q-Latch screw at the 2280 length screw hole. C.
Page 49
If the thermal pad on the M.2 heatsink becomes damaged and needs to replaced, we recommend replacing it with a thermal pad with a thickness of 1.25mm. Replace the heatsinks. Secure the heatsinks using the screws removed previously. ROG STRIX Z690-A GAMING WIFI 2-13...
2.1.5 Motherboard installation Place the motherboard into the chassis, ensuring that its rear I/O ports are aligned to the chassis’ rear I/O panel. Place nine (9) screws into the holes indicated by circles to secure the motherboard to the chassis. DO NOT over tighten the screws! Doing so can damage the motherboard.
Push the connector until it clicks into place. To install USB 3.2 Gen 1 connector To install USB 2.0 connector USB 2.0 USB 3.2 Gen 1 To install front panel audio connector AAFP ROG STRIX Z690-A GAMING WIFI 2-17...
2.1.9 Expansion card installation To install PCIe x16 cards To install PCIe x1 cards Chapter 2: Basic Installation 2-18...
Page 55
The TypeC_1 port can support up to 20V devices, and the TypeC_2 port can support up to 9V devices when the 6-pin PCIe power connector is connected. • Please visit the official website of your purchased Thunderbolt™ card for more details on compatibility. ROG STRIX Z690-A GAMING WIFI 2-19...
Page 56
Using the PCIe Slot Q-Release The PCIEX16(G5) slot comes with a PCIe Slot Q-Release button allowing you to easily remove an expansion card installed to this PCIe slot, even when the expansion card may be blocking the PCIe push-latch, such as a graphics card. Before installing an expansion card: Pressing the PCIe Slot Q-Release button before installing an expansion card to this slot will ensure the PCIe push-latch is completely pushed down before installation.
2.1.10 Wi-Fi moving antenna installation Installing the ASUS Wi-Fi moving antenna Connect the bundled ASUS Wi-Fi moving antenna connector to the Wi-Fi ports at the back of the chassis. • Ensure that the ASUS Wi-Fi moving antenna is securely installed to the Wi-Fi ports.
2.1.11 ROG Reusable Cable Organizer Your motherboard comes with a cable organizer which functions as a stylish accessory on your motherboard, or you may remove it and use it as a cable organizer, Chapter 2: Basic Installation 2-22...
• Updating BIOS may have risks. If the BIOS program is damaged during the process and results to the system’s failure to boot up, please contact your local ASUS Service Center. ROG STRIX Z690-A GAMING WIFI...
Page 60
For more information on using the BIOS FlashBack™ feature, please refer to https://www.asus.com/support/, or by scanning the QR code below. Chapter 2: Basic Installation 2-24...
If the steps above do not help, remove the onboard button cell battery and press the Clear CMOS button again to clear the CMOS RTC RAM data. After clearing the CMOS, reinstall the button cell battery. ROG STRIX Z690-A GAMING WIFI 2-25...
Motherboard rear and audio connections 2.4.1 Rear I/O connection Rear panel connectors DisplayPort USB 2.0 ports 11 and 12 USB 3.2 Gen 1 Type-A ports E1, E2, E3, and E4 Intel I225-V 2.5Gb Ethernet port* ® HDMI port ® Clear CMOS button (CLR_CMOS). Press this button to clear the BIOS setup information only when the systems hangs due to overclocking.
Mic In Mic In Orange – – Center/Sub Center/Sub woofer woofer Black – Rear Speaker Out Rear Speaker Out Rear Speaker Out 2.4.2 Audio I/O connections Audio I/O ports Connect to Headphone and Mic ROG STRIX Z690-A GAMING WIFI 2-27...
Page 64
Connect to Stereo Speakers Connect to 2-channel Speakers Connect to 4-channel Speakers Chapter 2: Basic Installation 2-28...
Page 65
Connect to 5.1-channel Speakers Connect to 7.1-channel Speakers ROG STRIX Z690-A GAMING WIFI 2-29...
Starting up for the first time After making all the connections, replace the system case cover. Ensure that all switches are off. Connect the power cord to the power connector at the back of the system chassis. Connect the power cord to a power outlet that is equipped with a surge protector. Turn on the devices in the following order: Monitor External storage devices (starting with the last device on the chain)
Knowing BIOS The new ASUS UEFI BIOS is a Unified Extensible Interface that complies with UEFI architecture, offering a user-friendly interface that goes beyond the traditional keyboard- only BIOS controls to enable a more flexible and convenient mouse input. You can easily navigate the new UEFI BIOS with the same smoothness as your operating system.
BIOS setup program Use the BIOS Setup to update the BIOS or configure its parameters. The BIOS screen include navigation keys and brief onscreen help to guide you in using the BIOS Setup program. Entering BIOS at startup To enter BIOS Setup at startup, press <Delete> or <F2> during the Power-On Self Test (POST).
ASUS EZ Flash 3 The ASUS EZ Flash 3 feature allows you to update the BIOS without using an OS-based utility. Ensure to load the BIOS default settings to ensure system compatibility and stability. Select the Load Optimized Defaults item under the Exit menu or press hotkey <F5>.
ASUS CrashFree BIOS 3 The ASUS CrashFree BIOS 3 utility is an auto recovery tool that allows you to restore the BIOS file when it fails or gets corrupted during the updating process. You can restore a corrupted BIOS file using a USB flash drive that contains the BIOS file.
For more information on configuring your RAID sets, please refer to the RAID Configuration Guide which you can find at https://www.asus.com/support, or by scanning the QR code. RAID definitions RAID 0 (Data striping) optimizes two identical hard disk drives to read and write data in parallel, interleaved stacks.
Page 73
RF exposure compliance. HDMI Trademark Notice The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. ROG STRIX Z690-A GAMING WIFI...
Page 74
Compliance Statement of Innovation, Science and Economic Development Canada (ISED) This device complies with Innovation, Science and Economic Development Canada licence exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Page 75
Tenez cet appareil à distance du ventre des femmes enceintes et du bas-ventre des adolescents. ROG STRIX Z690-A GAMING WIFI...
Page 76
ASUS products sold in Vietnam, on or after September 23, 2011,meet the requirements of the Vietnam Circular 30/2011/TT-BCT. Các sản phẩm ASUS bán tại Việt Nam, vào ngày 23 tháng 9 năm2011 trở về sau, đều phải đáp ứng các yêu cầu của Thông tư 30/2011/TT-BCT của Việt Nam.
Page 77
ASUSTek Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of The Radio Equipment Regulations 2017 (S.I. 2017/1206). Full text of UKCA declaration of conformity is available at https://www.asus.com/support/. The WiFi operating in the band 5150-5350MHz shall be restricted to indoor use for the country listed below:...
Page 78
Pilns ES atbilstības paziņojuma teksts pieejams šeit: zahtjevima i ostalim odgovarajućim odredbama direktive 2014/53/EU. Cijeli https://www.asus.com/support/ tekst EU izjave o sukladnosti dostupan je na https://www.asus.com/support/ Wi-Fi darbība 5150–5350 MHz ir jāierobežo lietošanai telpās valstīs, kuras WiFi koji radi na opsegu frekvencija 5150-5350 MHz bit će ograničen na norādītas tālāk.
Page 79
TA2020/6750 ASUSTek Computer Inc. tukaj izjavlja, da je ta naprava skladna s temeljnimi zahtevami in drugimi relevantnimii določili Direktive 2014/53/EU. Polno APPROVED besedilo izjave EU o skladnosti je na voljo na https://www.asus.com/ Complies with support/ IMDA Standards WiFi, ki deluje v pasovnem območju 5150–5350 MHz, mora biti v državah,...
Page 80
• ASUS offers a voluntary manufacturer’s Commercial Guarantee. • ASUS dragovoljno nudi komercijalno proizvođačko jamstvo. • ASUS reserves the right to interpret the provisions of the ASUS • ASUS zadržava prava na tumačenje odredbi ASUS komercijalnog Commercial Guarantee. jamstva. •...
Page 81
• ASUS tilbyr som produsent en frivillig kommersiell garanti. • Bảo hành thương mại này của ASUS được cung cấp độc lập và ngoài • ASUS forbeholder seg retten til å tolke bestemmelsene i ASUS sin Bảo đảm pháp lý theo luật định và không có cách nào ảnh hưởng đến kommersielle garanti.
Page 82
Address: 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112, Taiwan ASUS COMPUTER INTERNATIONAL (America) Address: 48720 Kato Rd., Fremont, CA 94538, USA ASUS COMPUTER GmbH (Germany and Austria) Address: Harkortstrasse 21-23, 40880 Ratingen, Germany ASUSTeK (UK) LIMITED Address: 1st Floor, Sackville House, 143-149 Fenchurch Street, London, EC3M 6BL,...