Loading the Washer Adding Cleaning Products Control Panel Wash Cycles Cycle Modifiers Special Care Features Options and Extra Functions 31 SMART FUNCTIONS LG ThinQ Application Smart Diagnosis Function 35 MAINTENANCE Regular Cleaning Periodic Maintenance Care in Cold Climates 40 TROUBLESHOOTING...
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USE Safety Messages Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and follow all safety messages.
Page 4
• If the product has been submerged in water, sitting in standing water, or waterlogged, do not come in contact with the product and immediately contact an LG Electronics customer information center for instructions before resuming use.
Page 5
IMPORTANT SAFETY INSTRUCTIONS • Do not modify or extend the power cord. • If the electrical supply cord is damaged, it must only be replaced by the manufacturer or its service agent or a similar qualified person in order to avoid a hazard. •...
IMPORTANT SAFETY INSTRUCTIONS CAUTION STATEMENTS CAUTION • To reduce the risk of minor or moderate injury to persons, malfunction, or damage to the product or property when using this product, follow basic precautions, including the following: Installation • Install the product on a firm and level floor. Operation •...
• For your safety and for extended product life, use only authorized components. The manufacturer is not responsible for product malfunction, property damage or bodily injury caused by the use of separately purchased unauthorized components, parts, or non-LG products. Front View...
Page 8
PRODUCT OVERVIEW Accessories Included Accessories Tie Strap † Leg Holders † Refer to the installation guide included with the leg holders for instructions on proper usage. Required Accessories (sold separately) Hot and Cold Water Hoses Product Specifications The appearance and specifications listed in this manual may vary due to constant product improvements. Model WT7250C* / WT7300C* WT7400C* / WT7480C*...
INSTALLATION INSTALLATION Before Installing WARNING • Moving or installation of the appliance requires two or more people. Failure to follow these instructions may result in injury. • Store and install the appliance where it will not be exposed to temperatures below freezing or exposed to outdoor weather conditions.
10 INSTALLATION Connecting to the Power Supply Final Installation Check Tools Needed Pliers Flat-Blade Screwdriver Level Choosing the Proper • The washer must be installed on firm flooring to minimize vibration during the spin cycle. Location Concrete flooring is best, but a wood floor is sufficient, provided it is built to FHA standards.
• Do not reuse old hoses. Use only new hoses when installing the washer. Old hoses could leak or burst causing flooding and property damage. Contact an LG Customer Information Center for assistance in buying hoses.
12 INSTALLATION • Connect the blue hose to the cold water NOTE faucet and the red hose to the hot water faucet. • Periodically check the hoses for cracks, leaks, and wear, and replace the hoses every five years. • Do not stretch the water hoses intentionally, and make sure that they are not pinched, crushed or kinked by other objects.
INSTALLATION hose can result in flooding and property NOTE damage. • If the drain is large enough for the flange on the hose to fit inside, then do not insert the flange NOTE more than 1 - 2 inches into the drain. •...
14 INSTALLATION How to Level the Washer the top of the lid. Using these surfaces will result in the washer being unlevel. Position the washer in its final location. • Take special care not to pinch, strain, or crush the water and drain hoses. If you have a carpenter’s level , you can use it to check that the washer is level.
Page 15
INSTALLATION • Connect this appliance to a grounded outlet Press the Start/Pause button. conforming to the rating prior to use. Failure to • The test will run for about 3 minutes. do so may result in fire, electric shock, or •...
16 OPERATION OPERATION Before Use Adjust settings. • Default settings for the selected cycle can be changed, if desired, using the cycle WARNING modifier and option buttons. • To reduce the risk of fire, electric shock, or injury • Not all modifiers and options are available to persons, read the SAFETY INSTRUCTIONS on all cycles.
OPERATION Sorting Laundry • Use the Bedding cycle for buoyant or nonabsorbent items such as pillows or comforters. Failure to follow this caution can Grouping Similar Items result in leakage. For the best washing results, and to reduce the • Clothing or articles that are waterproof or water possibility of damage to clothing, sort clothing into resistant must be washed in the Waterproof loads made up of similar items.
18 OPERATION Loading the Washer Bulky Items • Do not wash entire pillows or cushions. Remove General Tips pillow or cushion inserts and wash the covers only. • Check and empty pockets. Paper clips, coins, • Use the Bedding cycle for large or bulky items matches, and other items can damage clothing such as poly-filled jackets, comforters, pillows, and the washer.
OPERATION Adding Cleaning Products Single-Use Detergent Packs / Gel or Tablet Detergents About Detergent Use Place liquid or powdered detergent packs, or gel or tablet detergents in the tub before loading This washer is designed for use with only HE (High- laundry.
Page 20
20 OPERATION • If you use a detergent that does not dissolve easily or a detergent with high viscosity, it will leave a residue and clog the dispenser. Fabric Softener Compartment This compartment holds liquid fabric softener, which is automatically dispensed during the final rinse cycle.
Page 21
OPERATION Carefully pour the pre-measured amount of bleach directly into the bleach dispenser. • If you are using powdered bleach of any kind, pour it directly into the tub before adding the laundry. • Never add powdered bleach to the liquid bleach dispenser.
22 OPERATION Control Panel Control Panel Features Power On/Off Button • Press this button to turn the washer on or off. • Pressing this button during a cycle will cancel that cycle and any load settings will be lost. • The door will unlock after a brief pause. NOTE •...
Page 23
OPERATION Time and Status Display Estimated Time Remaining • When a cycle is selected, the default time for that cycle is displayed. This time will change as modifiers or options are selected. • If the display shows , then the time will be displayed after the load sensing has detected the load size.
24 OPERATION Wash Cycles The wash cycles are designed for specific types of wash loads. Select the cycle that best matches the load contents for maximum wash performance and fabric care. See the Sorting Laundry section for best results, and follow the fabric care labels on your garments. For a guide to fabric care symbols, see the Sorting Laundry section.
Page 25
OPERATION Cycle Waterproof Description Suitable for washing waterproof items such as water resistant clothing, mattress covers, outdoor clothes, and plastic mats. (less than 14 lb) NOTE • Do not use any other wash cycle to wash waterproof items. • Do not use this cycle to wash a mixed load of waterproof and non-waterproof items.
Page 26
• The default cycle is Small Load, used for normally soiled loads with a few items. This cycle is also available for download. • Refer to the LG ThinQ application to see the cycles available for download. Wash Temp. Default: Warm...
OPERATION Cycle Modifiers • Press the Spin button repeatedly until the desired speed is selected. • Some fabrics, such as delicates, require a slower About Modifier Buttons spin speed. To protect your clothing, not all spin Each cycle has default settings that are selected speeds are available for all cycles.
28 OPERATION NOTE NOTE • Best results are obtained with smaller loads (less • This washer is equipped with a special drain than 6 lb.) feature that is designed to make your washer as safe as possible. If the washer is paused or shut off while there is still water in the tub, the water will drain automatically after several minutes of Speed Wash...
Page 29
OPERATION Signal Press and hold the Spin button for 3 seconds. • You can change the spin speed by pressing The washer plays a melody when the wash cycle is the Spin button. finished. The buttons make a sound each time they are pressed.
Page 30
30 OPERATION NOTE • Turning off the power will not reset this function. You must deactivate this function before you can access any other options and functions. Locking the Control Panel Turn on the power. Press and hold the Signal button for 3 seconds to activate this function.
• Settings Run the LG ThinQ app and sign in with your - Allows you to set various options on the appliance and in the application. existing account or create an LG account to sign in.
Page 32
Internet service provider or refer to your wireless router manual. Press the Power button. • LG ThinQ is not responsible for any network connection problems or any faults, malfunctions, Press and hold the Remote Start button for 3 or errors caused by network connection.
Page 33
LG Electronics will also provide open source code FCC RF Radiation Exposure to you on CD-ROM for a charge covering the cost Statement...
If you experience a problem with your Wi-Fi equipped appliance, it can transmit troubleshooting data to a smartphone using the LG ThinQ application. • Launch the LG ThinQ application and select the Smart Diagnosis feature in the menu. Follow the instructions provided in the LG ThinQ application.
MAINTENANCE MAINTENANCE WARNING • To reduce the risk of fire, electric shock, or injury to persons, read this entire owner’s manual, including the SAFETY INSTRUCTIONS, before operating this appliance. • Unplug the appliance before cleaning to avoid the risk of electric shock. Failure to follow this warning can cause serious injury, fire, electric shock, or death.
Page 36
36 MAINTENANCE Leaving the Lid Open • For other tub cleaning products, follow the cleaner manufacturer’s instructions and After you finish using the washer, leave the lid recommendations. open overnight to allow air to circulate and dry the • Do not exceed the maximum fill line when tub.
Page 37
MAINTENANCE Wipe off any moisture with a dry towel or WARNING cloth after cleaning. • The inlet screens protect the delicate parts of the inlet valve from being damaged by particles that To clean the drawer opening, use a small, could enter the valves with the water supply.
38 MAINTENANCE preferably with the faucets wide open for Press the Start/Pause button to start the maximum flow. drain pump for 1 minute. • This will expel some of the antifreeze, NOTE leaving enough to protect the washer from damage. •...
Page 39
MAINTENANCE Press and hold the Spin button for 3 seconds to operate Spin Only cycle for draining and spinning. Press the Start/Pause button and check that the water fills properly. When the Drain Hose is Frozen Pour hot water in the washer tub and close the lid.
40 TROUBLESHOOTING TROUBLESHOOTING The washer is equipped with an automatic error-monitoring system to detect and diagnose problems at an early stage. If the washer does not function properly or does not function at all, check the following before you call for service. Before Calling for Service Error Messages Problem...
Page 41
TROUBLESHOOTING Problem Possible Cause & Solution The control lock function is on to prevent anyone from changing cycles or operating the washer. CONTROL LOCK • Turn off the control lock function in the control panel. See Control Lock under Options FUNCTION and Extra Functions.
Page 42
• Mechanical failure CLUTCH ERROR • Unplug the washer and call for service. Supply voltage is not correct. • Please call LG service center. You can find your local LG service center phone number on SUPPLY VOLTAGE the back cover page. ERROR...
Page 43
TROUBLESHOOTING Problem Possible Cause & Solution Vibrating noise Not all leveling feet are resting firmly and evenly on the floor. • See Leveling the Washer in INSTALLATION. Floor is not rigid enough. • Make sure that the floor is solid and does not flex. See Flooring in INSTALLATION. Squeaking noise Packaging materials were not removed.
Page 44
44 TROUBLESHOOTING Problem Possible Cause & Solution Washer will not turn Power cord is not properly plugged in. • Make sure that the plug is plugged securely into a grounded, 3-prong, 120-VAC, 60 Hz outlet. House fuse is blown, circuit breaker has tripped, or power outage has occurred. •...
Page 45
TROUBLESHOOTING Problem Possible Cause & Solution Washer will not Extremely low water pressure. operate. • Check another faucet in the house to make sure that household water pressure is adequate. Washer is too cold. • If the washer has been exposed to temperatures below freezing for an extended period of time, allow it to warm up before pressing the Power button.
Page 46
• Find the Wi-Fi network connected to your smartphone and remove it, then connect your not connected to the appliance on LG ThinQ. Wi-Fi network. Mobile data for your smartphone is turned on. • Turn off the Mobile data of your smartphone and connect the appliance using the Wi-Fi network.
Page 47
TROUBLESHOOTING Problem Possible Cause & Solution Your home appliance The router frequency is not 2.4 GHz. and smartphone are • Only a 2.4 GHz router frequency is supported. Set the wireless router to 2.4 GHz and not connected to the connect the appliance to the wireless router.
Should your LG Washer (“Product”) fail due to a defect in materials or workmanship under normal and proper use, during the warranty period set forth below, LG will, at its option, repair or replace the Product. This limited warranty is valid only to the original retail purchaser of the Product (“You”) and applies only when purchased lawfully and used within the United States including U.S.
Page 49
Notice of Dispute. In the event you intend to commence an arbitration proceeding, you must first notify LG in writing at least 30 days in advance of initiating the arbitration by sending a letter to LG at LG Electronics USA, Inc. Attn: Legal Department- Arbitration 111 Sylvan Avenue, Englewood Cliffs, NJ 07632.
Page 50
If you and LG are unable to resolve the dispute within 30 days, either party may proceed to file a claim for arbitration.
ARE NOT PERMITTED. PLEASE SEE THE SECTION TITLED “PROCEDURE FOR RESOLVING DISPUTES” BELOW. Should your LG Washer ("Product") fail due to a defect in materials or workmanship under normal and proper use, during the warranty period set forth below, LG Electronics Canada, Inc. ("LGECI") will, at its option, repair, replace or pro rate the Product upon receipt of proof of the original retail purchase.
Page 52
(ASC), as determined by LG Canada. If your Product is located outside a 150 km radius from a ASC, as determined by LG Canada, it will be your responsibility to bring the Product, at your sole expense, to the ASC for in-warranty repair.
Page 53
If you and LG are unable to resolve the dispute within 30 days of LG’s receipt of the Notice of Dispute, the dispute shall be resolved by binding arbitration in accordance with the procedure set out herein.
Page 54
If you prevail in the arbitration, LG will pay your attorneys’ fees and expenses as long as they are reasonable, by considering factors including, but not limited to, the purchase amount and claim amount. Notwithstanding the foregoing, if applicable law allows for an award of reasonable attorneys’...
Page 56
LG Customer Information Center For inquiries or comments, visit www.lg.com or call: U.S.A. 1-800-243-0000 1-888-542-2623 CANADA Register your product Online! www.lg.com...