Page 1
OPERATING INSTRUCTIONS TX-43JX600B / TX-43JX600BZ / TX-43JX610B TX-50JX600B / TX-50JX600BZ / TX-50JX610B TX-55JX600B / TX-55JX600BZ / TX-55JX610B TX-58JX600B / TX-58JX600BZ / TX-58JX610B TX-65JX600B / TX-65JX600BZ / TX-65JX610B LED TV You can find instructions for your TV’s features in the E-Manual.
• Do not place any heat sources such as electric Safety Information heaters, radiators, etc. near the TV set. • Do not place the TV on the floor or inclined surfaces. CAUTION • To avoid danger of suffocation, keep plastic bags RISK OF ELECTRIC SHOCK out of the reach of babies, children and domestic DO NOT OPEN...
Page 4
WARNING Apparatus connected to the protective earthing of the building installation through the MAINS connection or • Do not ingest the battery, Chemical Burn Hazard. through other apparatus with a connection to protective earthing – and to a television distribution system using • This product or the accessories supplied with the coaxial cable, may in some circumstances create a fire product may contain a coin/button cell battery.
Maintenance Assembling / Removing the pedestal First, remove the mains plug from the mains Preparations socket. Take out the pedestal(s) and the TV from the packing Display panel, Cabinet, Pedestal case and put the TV onto a work table with the screen panel down on the clean and soft cloth (blanket, etc.) Regular care: • Use a flat and firm table bigger than the TV.
• Remove the stand(s). You can also turn the screen off using the Screen Off When using the wall-hanging bracket option, if you want to hear the sound only and don't Please contact your local Panasonic dealer to need to watch. If pressed Right button or Left button purchase the recommended wall-hanging bracket. consecutively Screen Off option will be selected and “Screen will be off in 15 seconds.” message will be...
Ultra HD (UHD) Accessories Included TV supports Ultra HD (Ultra High Definition - also • Remote Control known as 4K) which provides resolution of 3840 x • Batteries: 2 x AA 2160 (4K:2K). It equals 4 times the resolution of Full • Operating Instructions HD TV by doubling the pixel count of the Full HD TV both horizontally and vertically.
TV Control & Operation Using Main TV Menu When the Home button is pressed, the main TV menu will appear on the screen. You can navigate through the menu items using the directional buttons on the remote. To select an item or see the sub-menu options of the highlighted menu press OK button.
3.2. Guide 3.9. Accessibility You can access the electronic programme guide menu You can access the accessibility settings menu directly using this option. Refer to Electronic Programme using this option. Guide section for more information. 3.10. Privacy Settings 3.3. Channels You can access the privacy settings menu directly You can access the Channels menu using this option.
Power Connection Licence Notification IMPORTANT: The TV set is designed to operate on a The terms HDMI, HDMI High-Definition Multimedia 220-240V AC, 50 Hz supply. After unpacking, allow the Interface, and the HDMI Logo are trademarks or TV set to reach the ambient room temperature before registered trademarks of HDMI Licensing Administrator, you connect the set to the mains.
• Most major credit and debit cards accepted. on human health and the environment. • All enquiries transactions and distribution facilities For more information about collection are provided directly by Panasonic UK. and recycling, please contact your local • It couldn’t be simpler! municipality.
16/9 43” 16/9 50” 16/9 55” 16/9 58” 16/9 65” Operation temperature and 0ºC up to 40ºC, 85% humidity max operation humidity For more product information, please visit EPREL: https://eprel.ec.europa.eu. EPREL registration number is available on https://eprel.panasonic.eu/product. English - 11 -...
The requirements for any country may change at any time. It’s recommended that user checks with Panasonic assumes no responsibility and makes no local authorities for the current status of their national warranty for the availability or the continuity of the regulations for 5 GHz wireless LAN’s.
Remote Control Standby: Switches On / Off the TV Info: Displays information about on-screen content, shows hidden information (reveal - in TXT mode) Guide: Displays the electronic programme guide Home: Displays TV menu Directional buttons: Helps navigate menus, content, etc. and displays the subpages in TXT mode when pressed Right or Left OK: Confirms user selections, holds the page (in TXT mode), views Channels menu (DTV mode)
Connections When using the wall mounting Connector Type Cables Device kit (available from a third party in the market, if not supplied), HDMI we recommend that you plug all Connection your cables into the back of the (side&back) TV before mounting on the wall. Insert or remove the CI module SPDIF SPDIF...
Depending on the model of your TV, the picture mode Switching On/Off selection screen may appear at this point. In order To Switch the TV On for your TV to consume less energy and be more Connect the power cord to a power source such as a environmentally friendly select Natural and press OK wall socket (220-240V AC, 50 Hz).
checkbox next to the selected option will be checked. • DiSEqC switch: If you have multiple satellite dishes To turn the search option off clear the checkbox by and a DiSEqC switch, select this antenna type. Then pressing OK, Left or Right directional button after set the DiSEqC version and press OK to continue.
USB input from the Sources menu and press OK. You Note: When viewing media files the Media Browser menu can only display a maximum of 1000 media files per folder. can also press the Source button on the remote and then select your USB storage device from the list of Media Browser sources.
frequencies or amount of data that is being transferred If the ALLM option is enabled, picture mode can not at a time. Higher bandwidth translates into a higher be changed as long as ALLM signal is received from amount of data that can be transferred. Higher the current HDMI source.
Settings Menu Content Picture Menu Content You can change the picture mode to suit your preference or requirements. Picture mode can be set to one of these options: Cinema, Game, Sports, Dynamic and Natural. Note: Available options may differ depending on the input source. Mode Dolby Vision Modes: If Dolby Vision content is detected Dolby Vision Dark and Dolby Vision Bright picture mode options will be available instead of Cinema and...
Page 21
Opens colour tuner settings. Set the Colour Tuner as Enabled to adjust the Hue, Colour Tuner Colour and Brightness values manually. You can use this option to set the range of colours displayed on your TV screen. When set as On, colours are set according to the source signal. When set as Off, the TV’s Gamut Mapping maximum colour capacity is used by default (recommended option).
Page 22
Sets headphone volume. This option will not be available if the Sound Output option is set as Lineout. Headphone Please ensure before using headphones that the headphone volume is set to a low level, to prevent damage to your hearing. Sets sound balance.
Page 23
System Menu Content Displays accessibility options of the TV. Some options will not be available if no channels Accessibility are installed. Increase the contrast of the menu options and texts to make them easier to read. White High Contrast Text, Yellow Text and Off options will be available. Hard of Hearing Enables any special feature sent from the broadcaster.
Page 24
Edit the names, enable or disable selected source options. There are also Regular and Enhanced options available for HDMI sources. These options are affecting the colour settings of the selected HDMI source. To be able to watch 4K or HDR/HLG images from Sources an HDMI source related source setting should be set as Enhanced if the connected device is compatible with HDMI 2.0 and subsequent versions.
Page 25
You can use this option to sign out. If you sign out Works With Alexa feature will be Sign Out disabled. Starts the setup process to enable your TV to work with Google Assistant devices. Highlight Start and press OK. If the setup is priorly completed Sign Out option will be Google Assistant available.
maturity level is disabled, prohibits access to the General TV Operation broadcast. Using the Channel List Note: If the country option in the First Time Installation is The TV sorts all stored stations in the channel list. You set as France, Italy or Austria, Maturity Lock’s value will be set to 18 as default.
programme guide matching the selected genre will Teletext Services (where available) be highlighted. Press the Text button to enter. Press again to activate Guide Search: Displays searching options. Using mix mode, which allows you to see the teletext page these options, you can search the programme guide and the TV broadcast at the same time.
will be displayed, press OK button to complete software • The batteries maybe inserted incorrectly. Refer to upgrade process and restart TV. the section “Inserting the Batteries into the Remote”. 3 AM search and upgrade mode No signal on an input source Your TV will search for new upgrades at 3:00 o’clock • It is possible that no device is connected.
Supported DVI Resolutions When connecting devices to your TV’s connectors by using DVI converter cable (DVI to HDMI cable - not supplied), you can refer to the following resolution information. 56Hz 60Hz 66Hz 70Hz 72Hz 75Hz 640x480 800x600 1024x768 1280x768 1280x960 1360x768 1366x768 1280x1024 1400x1050 1600x900 1920x1080 English - 29 -...
Internet Speed Test Connectivity Highlight Internet Speed Test and press the OK Wired Connectivity button. TV will check the internet connection bandwidth To Connect to a Wired Network and display the result when complete. • You must have a modem/router connected to an Advanced Settings active broadband connection.
When using Internet connecting function of this TV, If your router has WPS, you can directly connect to the after agreeing to Panasonic’s terms of service / privacy modem/router without entering a password or adding policy (hereinafter referred to as terms and conditions the network first.
Scan for devices. After you select your TV and connect, • Panasonic will not be held responsible for collecting the screen of your device will be displayed on your TV. or using customer Information via application Note: This feature can be used only if the mobile device provided by third party on this TV or website.
each time when you connect to the internet. This is a PC/HDD/Media Player or any other devices that are precaution against unauthorised access. Since your compatible should be used with a wired connection for TV has its own MAC address, your internet service higher playback quality. provider cannot validate the MAC address of your TV. Use a LAN connection for quicker file sharing between For this reason, your TV cannot connect to the internet.
Catch-up content can also be accessed and played the OK button again. Name and Address will be filled back directly from the TV Guide. Refer to the section automatically according to the site you are visiting. Electronic Programme Guide for more information. Highlight OK and press the OK button to add.
green, yellow, blue, may be defined for some other (*) The Microphone Box can be purchased separately if not supplied with the TV. For more information contact your local functions, e.g. shortcuts). dealer or retail outlet where you bought your TV. If you switch to another channel while an HbbTV application is active (either in red button icon mode • Connect your Microphone Box to your TV...
If you skip the setup wizard after the first time ins- Command Function tallation you can use the Works With Alexa option Alexa, turn the volume Decreases volume by in the Settings>System>Voice Assistant menu to down on ‘FN’ 10 units carry out the setup later manually.
• You will be asked to determine a name for your TV DVB functionality information on the next screen, called ‘Friendly Name’(FN). A This DVB receiver is only suitable for use in the country ‘Friendly Name’ is a name that reminds you of your which it was designed to be used in.
Important Instruction For your own safety read following instruction carefully before attempting to connect this unit to the mains supply. MAINS (AC) OPERATION The wires in the mains lead are coloured in accordance with the following code : Green&Yellow (Earth) (if there is earth cable) Blue (Neutral) Brown (Live) Fuse...