Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Beko BDF1401X
Summary of Contents for Beko BDF1401X
- Page 1 Dishwasher User’s Manual BDF1401X 15 8665 0100_AB_BEKO_A6AU_EN/ 19-08-22.(11:07)
- Page 2 Please read this user manual first! Dear Customer, We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
-
Page 3: Table Of Contents
CONTENTS 1 INSTRUCTIONS FOR SAFETY Upper basket height adjustable rack 22 Upper basket multipurpose service AND ENVIRONMENT rack ............22 General safety ........4 Adjusting the height of the upper Intended use ..........4 basket ..........23 Children’s safety ........5 Collapsible upper basket wires ..24 Disposing of packaging material ..5 Height setting with empty basket .. - Page 4 Mandatory Warnings Dishwashers The appliance is not intended for use by persons (including children) • with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervised or instruction concerning use of the appliance by a responsible person for their safely.
-
Page 5: Instructions For Safety And Environment
instructions for safety and environment This section contains safety Never touch the plug with • instructions that will help to get wet hands! Never unplug by protected from risk of personal pulling on the cable, always injury or property damage. Failure pull out by grabbing the plug. -
Page 6: Children's Safety
instructions for safety and environment This appliance is intended WARNING: Some dishwasher • to be used in household and detergents are strongly similar applications such as: alkaline. They can be extremely - Staff kitchen areas in shops, dangerous if swallowed. Avoid offices and other working contact with the skin and eyes environments;... -
Page 7: Transportation Of The Product
instructions for safety and environment Transportation of the learn about these collection centers. product Compliance with RoHS If you need to move the Directive product, do it in upright position and hold from The product you have purchased the rear side. Slanting complies with EU RoHS Directive the product onto its (2011/65/EU). -
Page 8: Dishwasher Overview
Dishwasher Overview 1. Upper basket 2. Upper impeller 3. Lower impeller 4. Silverware basket (depends on model) 5. Door 6. Rating Label 7. Control panel 8. Detergent dispenser 9. Lower basket 10. Filters (depends on model) 11. Salt reservoir lid 12. -
Page 9: Fan Drying System
Dishwasher Technical specifications Compliance to standards and test data / EC declaration of conformity This product complies with the following EU directives; Development, production and sales stages of this product comply with the safety rules included in all pertaining European Community regulations. 2014/35/EU, 2014/30/EU, 93/68/EC, IEC 60436/DIN 44990, EN 50242 Power input 220-240 V, 50 Hz (see rating label) -
Page 10: Installation
Installation Appropriate installation Refer to the nearest Authorised Service Agent for installation of your product. To location make the product ready for use, make sure Place the product on a solid and flat • that the electricity, tap water supply and floor that has sufficient load carrying water drainage systems are appropriate capacity! The product must be... -
Page 11: Connection To The Drain
Installation Permitted water temperature: For your safety, close the water up to 25°C ( 60°C for products inlet tap completely after the equipped with Aquasafe+; please washing programme is over. refer toAquasafe+ section ) The dishwasher may not be connected to Connection to the drain open warm water devices or flow-through Water discharge hose can directly be... -
Page 12: Aquasafe
Installation Aquasafe+ liable for any damages that will arise when the product is used without grounding in (depends on model) accordance with the local regulations. The Aquasafe+ system protects against Connection must comply with national • water leaks that may occur at the hose regulations. - Page 13 Installation perform first operation in the shortest programme with detergent while the machine is empty. During the initial use, fill the salt reservoir with 1 litre of water prior to filling it with salt. There might be a small amount of water left in the product after factory quality control tests.
-
Page 14: Preparation Tips For Energy Saving
Preparation Tips for energy saving detergent dispenser lid (A). Following information will help you use the product in an ecological and energy- efficient manner. Wipe away any coarse food remnants on the dishes before putting them in the product. Operate the product after filling it completely. -
Page 15: Tablet Detergents
Preparation The best washing performance in dishwashers is obtained by using detergent, rinse aid and water softening salt individually. Observe the instructions of the detergent manufacturer on the package when using tablet detergents. Contact the detergent manufacturer if your dishes Use powder or liquid/gel are wet and/or if you notice limescale spots particularly on... -
Page 16: Rinse Aid
Preparation Rinse aid 4. If there are stains on tableware items after washing, level must be increased The rinse aid used in and if there is a blue trace after wiping dishwashers is a special them by hand, it must be decreased. combination that aims to This is set to position 3 as factory increase drying efficiency and... -
Page 17: Placing The Dishes Into The Dishwasher
Preparation Placing the dishes into the dishwasher You can use your dishwasher in the optimum way with respect to energy consumption and washing and drying performance only if you place the dishes in an orderly way. Wipe away any coarse food remnants •... - Page 18 Installation Suggestions for loading the dishwasher Improper Loading Of Dishware Lower basket Upper basket Improper Loading Of Dishware Dishwasher / User’s Manual 17 / 41 EN...
-
Page 19: Cutlery Basket
Installation Cutlery basket Cutlery basket (depends on model) (depends on model) Cutlery basket is designed to wash your Cutlery basket is designed to wash your dishes such as knife, fork, spoon, etc. in an dishes such as knife, fork, spoon, etc. in an efficient manner. -
Page 20: Collapsible Lower Basket Tines
Installation Collapsible lower basket Bringing the tines to the tines horizontal position by holding them from the tips may cause (depends on model) them to bend. Therefore, it There are foldable tines (A) located at the will be appropriate to bring the tines in the middle to horizontal lower basket of the machine are designed or vertical position by holding... -
Page 21: Tray Wash Supports
Installation SoftTouch Accessory (depends on model) The SoftTouch Accessory found in the lower basket of your machine enables a safe washing for your fragile glasses. Bringing the tines to the horizontal position by holding them from the tips may cause them to bend. -
Page 22: Lower Basket Multipurpose / Height Adjustable Service Rack
Installation Lower basket multipurpose Make sure that the impeller / height adjustable service does not touch the dishes you rack placed on the racks. (depends on model) To close the racks: This accessory located at the lower basket Fold the rack (A). of your machine allows you to easily wash 2. -
Page 23: Lower Basket Bottle Wire
Installation Lower basket bottle wire Upper basket multipurpose service rack (depends on model) The bottle wire is designed for easier (depends on model) washing of long pieces with wide mouths. This accessory located at the upper basket You may take out the bottle wire from the of your machine allows you to easily wash basket when not in use by pulling it out pieces such as extra long ladles and bread... -
Page 24: Adjusting The Height Of The Upper Basket
Installation Adjusting the height of the To raise the basket, hold the wires of the basket and pull the basket upwards upper basket with both hands while the basket is at (depends on model) the lowermost position (B) Upper basket height adjustment 2. -
Page 25: Collapsible Upper Basket Wires
Installation Height setting with empty Collapsible upper basket basket wires (depends on model) (depends on model) In this model, the height setting of the upper You can use collapsible wires when you basket may be changed using the wheels need a larger space for your dishes in the which are mounted at two different heights. -
Page 26: Ceiling Cutlery Basket
Installation Ceiling cutlery basket (depends on model) Ceiling cutlery basket is designed to wash your cutlery items such as forks, spoons and etc. by placing them between the bars on the basket. When the central tray is in the lower position, you can load long/high items such as coffee cups, ladles, etc. -
Page 27: Operation Of The Product
Operation of the product 3 4 5 6 7 1. On-Off / Program Selection knob 2. Rinse aid ( ) indicator ( depends on model ) 3. Low salt ( ) warning indicator Half load indicator 5. Delay indicator Child Lock Indicator 7. -
Page 28: Keys
Operation of the product Keys On-Off / Program Selection knob When you select a program with the On- Off / Program Selection knob, On Warning control light is illuminated, and it is turned off when you bring the knob to Off position. Start / Pause / Cancel key Used for starting, holding or cancelling the selected program. - Page 29 Operation of the product /41 EN Dishwasher / User’s Manual...
-
Page 30: Auxiliary Functions
Operation of the product Auxiliary functions Press and hold the tablet function buttons on the panel to activate the tablet function Washing programmes of your dishwasher for appropriate programmes. Selecting are designed to obtain the best cleaning the tablet function will light the Tablet effect, considering the type of the soil, Detergent indicator. - Page 31 Operation of the product Child (Key) Lock Interior Lighting (depends on the model) (Depends on the Model) Some models have interior lighting to You may prevent other persons from illuminate the interior when the door is affecting and changing the program flow opened.
-
Page 32: Programming The Washing Period
Operation of the product Programming the Washing Machine softens the water as per the Period hardness of the mains water. The washing period may differ due to the Time Delay key water softening process. Moreover, You may delay the start time of the program program period may also change while up to 9 hours with the Delay key. -
Page 33: Setting The Rinse Aid Amount
Operation of the product Cancelling the program Setting the Rinse aid Amount Press the Start / Pause / Cancel key for 3 seconds to cancel the program. While the Program Selection Knob is “Off”, press and hold the Half Load/ 2. -
Page 34: End Of Program
Operation of the product Level of Rinse Aid program Rinse Aid Setting Indicator Amount selection knob Applies 1 dose The washing indicator on of rinse aid. the panel illuminates. Applies 2 dose The drying indicator on the of rinse aid. panel illuminates. -
Page 35: Maintenance And Cleaning
Maintenance and cleaning Cleaning the filters Service life of the product extends and frequently faced problems decrease if it is Clean the filters at least once a week in cleaned at regular intervals. order for the machine operates efficiently. Unplug the product and turn off Check if food residues are left on the filters. -
Page 36: Cleaning The Hose Filter
Maintenance and cleaning Cleaning the hose filter Damages on the machine that may be caused by impurities coming from the urban supply water or your own water installation (such as sand, dirt, rust, etc.) can be prevented by means of the filter attached to the water inlet hose. -
Page 37: Cleaning The Impellers
Maintenance and cleaning Cleaning the impellers Upper impeller Clean the impellers at least once a week in Check if the holes on the upper impeller (1) order for the machine operates efficiently. are clogged. If they are clogged, remove and clean the impeller. Turn its nut to left to Lower impeller remove the upper impeller. -
Page 38: Troubleshooting
Troubleshooting Machine does not start. • Power cable is unplugged. >>> Check if the power cable is plugged in. • Fuse is blown. >>> Check the fuses in your house. • Water is cut. >>> Make sure that the water inlet tap is open. •... - Page 39 Troubleshooting • Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the machine. • Machine is unloaded right after the programme is over. >>> Do not unload your machine right after washing process is completed.
- Page 40 Troubleshooting There is a different odour in the machine A new machine has a peculiar odour. It will fade out after a couple of washes. • Filters are clogged. >>> Check if the filter system is clean. Clean the filter system regularly as illustrated in section “Cleaning and Care”.
- Page 41 Troubleshooting • Detergent is stored under unsuitable conditions. >>> If you are using powder detergent, do not store the detergent package in humid places. Keep it in a closed container if possible. For ease-of-storing, we recommend you to use tablet detergents. •...
- Page 42 Troubleshooting • Lid of the rinse aid reservoir is left open. >>> Make sure that the lid of the rinse aid reservoir is closed after adding rinse aid. Kitchen utensils are broken. • Dishes are not placed orderly in the machine. >>> Load the dishes as described in the user manual.