Contents 1 Important safety instructions Hearing safety General information 2 Your True wireless earpieces What's in the box Other devices Overview of your True wireless earpieces 3 Get started Charge the battery How to wear App download Pair for the �rst time Pair with another Bluetooth device 8 4 Use your earpieces Connect to your Bluetooth device...
1 Important General information safety To avoid damage or malfunction: instructions Caution Do not expose headphones to excessive heat. Do not drop your headphones. Hearing safety Headphones shall not be exposed to dripping or splashing. (Refer to the IP rating of speci�c product) ...
Page 4
To avoid risk of �re, the equipment is supplied only by external power source which output shall comply with PS1 (with output capacity less than 15W). Operating and storage temperatures and humidity • Store in a place where the temperature is between -20°C (-4°F) and 50°C (122 °F) with up to 90% relative humidity.
2 Your True wireless earpieces USB-C charging cable (for charging only) Congratulations on your purchase, and welcome to Philips! To fully bene�t from the support that Philips offers, register your product at www.philips.com/support. With these Philips True wireless earpieces Quick start guide you can: •...
Overview of your True wireless earpieces LED indicator (earpieces) Multi-function touch (MFT) Bluetooth pair button LED indicator (BT pairing and factory reset) LED indicator (battery state or charging state) USB-C charging slot...
3 Get started Earpieces Place the earpieces in the charging box. • The earpieces start charging and the Charge the battery blue LED light goes on • When the earpieces are fully charged, the blue light will go off Note ...
3 sizes of silicone ear tips and stabilizers are provided : large, medium, small. The Philips Headphones App put you in charge of the music you’ve listening to. You can customize the sound so your music and calling experience always best suits your needs.
Bluetooth device. 03" Turn on the Bluetooth function of your Bluetooth device, select Philips TAA7507. Note Enter the earpieces' password “0000” The earpieces store 4 devices in the memory. If you try to pair more than 4 devices, the earliest (4 zeros) if prompted.
4 Use your Control ANC (Active Noise earpieces Cancelation) Enable ANC Connect the earpieces to Different ANC modes can be toggled via your Bluetooth device double tapping on the right earpiece. • ANC function is automatically activated when earpiece is placed in Turn on the Bluetooth function of the ear your Bluetooth device.
Power on/off Voice Assistant Task Button Operation Task Operation Trigger Voice Left Tap and Turn the Take (Siri/Google) earpiece hold earpieces earpieces Assistant 2 seconds out of the charging Stop Voice Left Single tap box to Assistant earpiece power on Put earpieces Turn the back into the...
Charging box LED indicator status When charging Indicator Battery low Amber LED lights Relative adequate White LED lights battery In use and cover Indicator is open Battery low Amber slowly blinks for 4 cycles Relatively Off adequate battery...
On your Bluetooth device, go to the Charging time: 2 hours Bluetooth menu and remove Philips Lithium-ion battery 55 mAh on TAA7507 from the device list. each earpiece, Lithium-ion battery 500 mAh on charging box Turn off the Bluetooth function of Bluetooth version: 5.2...
2013/56/EU which cannot be disposed of with normal household waste. We strongly advise you to take your product to an official collection point or a Philips service centre to have a professional remove the rechargeable battery. Inform yourself about the local separate...
if not installed and used in accordance Compliance with EMF with the instruction manual, may cause harmful interference to radio This product complies with all communications. applicable standards and regulations However, there is no guarantee that regarding exposure to electromagnetic interference will not occur in a particular �elds.
Page 16
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) L’appareil ne doit pas produire de brouillage; (2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en...
8 Trademarks Bluetooth The Bluetooth word mark and logos are ® registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by MMD Hong Kong Holding Limited is under license. Other trademarks and trade names are those of their respective owners.
(see ‘Technical data’ on page 12). connected Bluetooth devices. • On your Bluetooth device, delete Clean your headphones regularly. “Philips TAA7507” from the Bluetooth • Use a clean, damp cloth to clean your list. headphones - especially the sound •...
Page 19
Charge your headphones regularly. If the headset is not used for a long time, the rechargeable battery will begin to lose its charge. To avoid this loss, please fully charge the battery at least once every three months.
Page 20
Speci�cations are subject to change without notice. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Holding Limited or one of its affiliates, and MMD Hong Kong Holding Limited is the warrantor in relation to this product.