Related Manuals for Siemens WM6YH890ES
Summary of Contents for Siemens WM6YH890ES
- Page 1 Washing machine WM6YH890ES, WM6YH89XES siemens-home.com/welcome Register your product online ens-home.com/welcome...
- Page 2 Your new washing machine Display rules : Warning! You have chosen a Siemens washing machine. This combination of symbol and signal word indicates a possibly dangerous Please take a few minutes to read and situation. Not heeding the warning can become familiar with the advantages of cause death or injuries.
-
Page 3: Table Of Contents
Contents e n I n s t r u c t i o n M a n u a l a n d I n s t a l l a t i o n I n s t r u c t i o n s Intended use. - Page 4 Changing the programme ..45 Cleaning and maintenance . . . 59 Cancel the programme ..45 Machine housing/control panel ..59 Programme end during rinse hold .
-
Page 5: Intended Use
Intended use Intended use This appliance is intended for private ■ I n t e n d e d u s e domestic use only. Do not install or operate this ■ appliance anywhere that is liable to experience frost and/or outdoor conditions. -
Page 6: Safety Instructions
Safety instructions Do not allow children to Safety instructions ■ clean or maintain this appliance unsupervised. The following safety information Keep children under 3 years S a f e t y i n s t r u c t i o n s and warnings are provided to ■... -
Page 7: Installation
Safety instructions Warning Installation Risk of suffocation! Warning If allowed to play with the Risk of electric shock/fire/ packaging/plastic film or material damage/damage to packing components, children the appliance! may become caught in these or If the appliance is not installed pull them over their heads and properly, this may lead to a suffocate. - Page 8 Safety instructions If you take hold of any of the Warning ■ appliance's protruding parts Risk of electric shock/fire/ (e.g. the appliance door) in material damage/damage to order to lift or move it, these the appliance! parts may break off and If the appliance's mains cable is cause injury.
- Page 9 Safety instructions The appliance is secured for Caution! ■ transportation by transport Material damage/damage to locking devices. If the the appliance transport locking devices are If the water pressure is too ■ not removed before the high or too low, the appliance is operated, this appliance may not be able to may result in damage to the...
-
Page 10: Operation
Safety instructions If you reach into the drum Operation ■ while it is still rotating, you Warning risk injuring your hands. Risk of explosions/fire! Wait until the drum has Laundry that has been stopped rotating. pretreated with cleaning agents Warning that contain solvents, e.g. -
Page 11: Cleaning/Maintenance
Safety instructions Caution! Cleaning/Maintenance Material damage/damage to Warning the appliance Danger of death! If the amount of laundry in ■ The appliance is powered by the appliance exceeds its electricity. There is a risk of maximum load capacity, it electric shock if you come into may not be able to operate contact with live components. - Page 12 Safety instructions Warning Caution! Risk of poisoning! Material damage/damage to the appliance Poisonous fumes may be given off by cleaning agents that Cleaning agents and agents for contain solvents, e.g. cleaning pretreating laundry (e.g. stain solvent. removers, prewash sprays, etc.) Do not use cleaning agents that may cause damage if they contain solvents.
-
Page 13: Environmental Protection
Environmental protection Information on energy and water ■ Environmental consumption: ~ Page 27 The displays provide information protection about the relative level of energy and water consumption in the selected Packaging/used appliance programmes. E n v i r o n m e n t a l p r o t e c t i o n The more display segments are Dispose of packaging in an visible, the higher the respective... -
Page 14: Positioning And Connecting
Positioning and connecting ( Mains cable Positioning and 0 Bag: connecting Installation and operating ■ instructions Included with the appliance Customer services location ■ P o s i t i o n i n g a n d c o n n e c t i n g directory* Check the machine for transport Note:... -
Page 15: Safety Instructions
Positioning and connecting Safety instructions Installation surface The washing machine be stable Warning Note: so that it does not move around. Risk of injury! The installation surface must be firm The washing machine is very heavy. ■ ■ and level. Be careful when lifting/transporting Soft floors/floor coverings are not the washing machine. -
Page 16: Installing The Appliance In A Kitchenette
Positioning and connecting Installing the appliance in a Keep the screws and sleeves in Note: a safe place. kitchenette Warning Danger of death! There is a risk of electric shock if you touch live components. Do not remove the appliance covering plate. -
Page 17: Hose And Cable Lengths
Positioning and connecting Hose and cable lengths Left-hand connection ■ Right-hand connection ■ The following are available from Tip: specialist dealers/customer services: Extension for Aqua-Stop and cold ■ water supply hose (approx. 2.50 m); order no. WM Z2380, WZ 10130, CZ 11350, Z 7070X0 A longer supply hose ■... -
Page 18: Water Inlet
Positioning and connecting Water inlet Optimum water pressure in the supply network Warning At least 100 kPa (1 bar) Danger of death! Maximum 1000 kPa (10 bar) There is a risk of electric shock if you When the tap is open, the water flow touch live components. -
Page 19: Water Outlet
Positioning and connecting Water outlet Connection Drainage into a washbasin Warning ■ Risk of scalding! When you are washing at high temperatures, there is a risk of scalding if you come into contact with hot water (e.g. when draining hot water into a washbasin). -
Page 20: Levelling
Positioning and connecting Levelling Align the appliance using a spirit level. Incorrect alignment may result in loud noises, vibrations and machine "movement". Loosen the lock nuts using a WAF17 spanner, by turning it in a clockwise direction. Check the alignment of the washing machine with a spirit level, and adjust it if necessary. -
Page 21: Electrical Connection
Positioning and connecting Electrical connection The mains plug can be accessed at ■ all times. The mains cable is not kinked, Warning ■ squashed, altered or cut through. Danger of death! The mains cable does not come into There is a risk of electric shock if you ■... -
Page 22: Before Washing For The First Time
Positioning and connecting Before washing for the first time The washing machine was thoroughly tested before leaving the factory. To remove any water that may be left over from the test, run the first wash cycle without any laundry. Notes The washing machine must be ■... -
Page 23: Transportation
Positioning and connecting Transportation Insert all four sleeves. Clip the mains cable securely in the E.g. when moving house holders. Insert the transportation securing bolts and tighten them with Caution! a wrench (WAF 13). Risk of damage to the appliance caused by detergent/fabric softener leaking from the dispensers. -
Page 24: Main Points In Brief
Main points in brief Main points in brief M a i n p o i n t s i n b r i e f Plug into the mains. Open the washing Sort the laundry. To switch on, press Turn on the tap. machine door. -
Page 25: Getting To Know The Appliance
Getting to know the appliance Getting to know the appliance Washing machine G e t t i n g t o k n o w t h e a p p l i a n c e Service flap Detergent drawer with illuminated displays for the i-Dos dispenser on the drawer handle ~ Page 47... -
Page 26: Control Panel
Getting to know the appliance Control panel All the buttons are sensitive Buttons Basic settings 3 sec. Note: (except for the main switch) and only (ajuste base 3s.) for changing need to be pressed lightly. the appliance settings, e.g. button signals, an overview of all selectable Main switch To switch the appliance on/off:... -
Page 27: Display Panel
Getting to know the appliance The Remote Start } button releases the appliance so that the programme can be started remotely via the Home Connect app. Remote start remains enabled for 24 hours after it has been activated. It is automatically deactivated if you do not start the programme via the Home Connect app during this... - Page 28 Getting to know the appliance Wait or go back to the main menu by Use the i-Dos button to select the pressing the Options × (menu ×) dispenser and the dosage quantity button. Press the i-Dos button. Use the buttons below the two left-hand Basic settings 3 sec.
-
Page 29: Laundry
Laundry Some examples of soiling levels can Laundry be found on ~ Page 30 – Light: Do not prewash, select the P repare the laundry speedPerfect ( setting if L a u n d r y necessary Caution! – Normal Damage to the appliance/fabrics –... -
Page 30: Detergent
Detergent Saving energy and detergent Detergent For light and normal soiling, you can C orrect selection of detergent save energy (lower washing D e t e r g e n t temperature) and detergent. The care label is crucial for selecting the correct detergent, temperature and Saving Soiling/note... -
Page 31: Overview Of Programmes
Overview of programmes Overview of programmes Programmes on the programme selector O v e r v i e w o f p r o g r a m m e s Programme/type of laundry/instructions Settings Name of the programme Max. load Brief explanation of the programme and the fabrics for which it is Temperature that can be selected;... - Page 32 Overview of programmes Programme/type of laundry/instructions Settings Easy-Care(sintéticos) Max. 4 kg Textiles made of synthetic materials or blended fabrics ¯ - 60 °C 0-1200** rpm ¦, (, ã, !, l, Ã, æ, õ, $, ç Detergent è, fabric softener è Max.
- Page 33 Overview of programmes Programme/type of laundry/instructions Settings Super 15/30 (express 15/30 min.) * Max. 2 / 3,5 kg Extra-short programme of approx. 15 / 30 minutes, suitable for ¯ - 40 °C small items of lightly soiled laundry 0-1200** rpm The Super 15 programme is run for the speedPerfect ( Note: .
- Page 34 Overview of programmes Programme/type of laundry/instructions Settings Shirts / Business (camisas / business) Max. 2 kg Non-iron shirts or blouses made of cotton, linen, synthetic fibres or ¯ - 60 °C blended fabrics 0-800** rpm Notes ¦, (, ã, !, l, Ã, æ, õ, Shirts/blouses are only given a short spin on the Less Iron (æ) ■...
- Page 35 Overview of programmes Programme/type of laundry/instructions Settings Rinse / Freshen Up * Rinse Plus with spin 0-1600** rpm Ã, l, $, æ Detergent -, fabric softener è Spin * Extra spin with selectable speed 0-1600** rpm æ Detergent -, fabric softener - Drain * For the rinsing water, e.g.
-
Page 36: Starching
Overview of programmes Programme/type of laundry/instructions Settings Sportswear * Max. 2 kg Sportswear and leisurewear made from microfibre fabrics ¯-40 °C Notes 0-800** rpm Laundry must not be treated with fabric softener. ■ ¦, (, ã, !, l, Ã, æ, õ, Before washing, clean the detergent drawer thoroughly (manual ■... -
Page 37: Programme Default Settings
Programme default settings Finish in Programme default (terminado en/em) settings The programme duration is shown after selecting the programme. The programme default settings are P r o g r a m m e d e f a u l t s e t t i n g s displayed in the main menu after Before starting the programme, you selecting the programme. -
Page 38: I-Dos Settings
Programme default settings i-Dos settings i-Dos i for fabric softener Dosage strengths Your washing machine has an intelligent dosing system for liquid detergent and High: high level of softness ª fabric softener (or detergent when using Medium: medium level of softness ©... -
Page 39: Additional Programme Settings/Options (* Depending On The Model)
Additional programme settings/options Prewash * Additional programme settings/options (* Settings that can be selected: depending on the on – off model) For heavily soiled laundry. The settings/options that are available Notes A d d i t i o n a l p r o g r a m m e s e t t i n g s / o p t i o n s depend on the model. -
Page 40: Less Iron
Additional programme settings/options Less Iron * Rinse Hold * (æ) Settings that can be selected: Settings that can be selected: on – off on – off Reduces creasing thanks to a special The washing remains in the water after spin sequence followed by fluffing and the last rinse cycle. -
Page 41: Stains
Additional programme settings/options Stains * The washing machine adjusts the average washing temperature, drum movement and soaking time to the specific type of stain. Hot or cold water, In total, there are 16 different types of gentle or intensive washing and long or stain to choose from. -
Page 42: Operating The Appliance
Press the # button. The appliance is settings for each washing cycle. switched on. To do this, repeatedly press the The Siemens logo appears on the corresponding button until the required display and all indicator lamps light up. setting is displayed. ~ Page 37 The Cottons programme set at the factory is then always displayed. -
Page 43: Select Additional Programme
Additional programme settings/options load. ~ Page 39 Wait until the Siemens logo no longer ■ appears before adding laundry. The load screen appears when the Placing laundry into the drum ■... -
Page 44: Start The Programme
Operating the appliance Start the programme Note: Foam detection If Foam has been detected also Make sure that no items of laundry are appears on the display panel, the trapped between the door and the washing machine has detected too rubber seal, and close the door. -
Page 45: Adding Laundry
Operating the appliance Adding laundry Cancel the programme After starting the programme, you can For programmes at high temperatures: add or remove laundry if necessary. Press the Ü button. To cool down laundry: Press the Ü button to do this. Select Rinse / Freshen Up. -
Page 46: Removing Laundry/Switching Off The Appliance
Operating the appliance Removing laundry/switching off the appliance Open the loading door and remove the laundry. Follow the information on the display panel. Press the # button. The appliance is switched off. Turn off the tap. Not required for AquaStop Note: models. -
Page 47: Intelligent Dosing System
Intelligent dosing system Notes Intelligent dosing Only use easy-pour liquid products ■ system that the manufacturer recommends adding to the detergent drawer. Do not mix different liquid Intelligent dosing system in ■ detergents. If changing your liquid I n t e l l i g e n t d o s i n g s y s t e m the detergent drawer detergent (type, manufacturer, etc.), empty the dispenser completely and... -
Page 48: Everyday Use
Intelligent dosing system When the appliance is switched on, the The dosage strength has been preset to following indicates that the detergent low (lightly soiled laundry) for drawer is closed completely: detergent ô and to medium (medium level of softness) for fabric softener i. It The corresponding illuminated ■... -
Page 49: Base Dosage
Intelligent dosing system Base dosage Set the basic detergent dosage according to the detergent's packaging label. Take your water hardness into The basic dosages are: consideration when doing so. For detergents – based on the Select the basic fabric softener dosage ■... -
Page 50: Manual Dosage
Intelligent dosing system The i-Dos ô dispenser is Caution! ■ automatically deactivated if Damage to the appliance detergent dosing is activated for the Cleaning agents and agents for i-Dos iIô dispenser. pretreating laundry (e.g. stain removers, The settings for this programme are prewash sprays, etc.) may cause saved until they are changed. -
Page 51: Home Connect
Home Connect Connecting to your home Home Connect network automatically T his appliance is Wi-Fi enabled and can If your router has a WPS function, you H o m e C o n n e c t be controlled remotely via a smartphone can connect the appliance to your home or tablet PC. -
Page 52: Connecting To Your Home Network Manually
Home Connect Connecting to your home network manually If you have already automatically connected your appliance to your home network, you can skip the manual connection step and connect it to the Home Connect app ~ Page 53. If your router does not have a WPS function, you will need to connect the appliance to your home network The appliance will now set up its... -
Page 53: Connecting To The Home Connect App
Home Connect Connecting to the Home Open the Home Connect app on your smartphone or tablet PC and Connect app select Connect to add your new appliance. If your appliance is connected to your If your smartphone or Note: home network, you can connect it to the tablet PC is still connected to the Home Connect app. -
Page 54: Switching Wi-Fi On And Off
Home Connect Switching Wi-Fi on and off Resetting your network settings You can switch the Home Connect function on your appliance on or off You can clear the network settings and permanently at any time. break the connection to your smartphone or tablet PC by resetting Switch the appliance on. -
Page 55: Updating The Software
Home Connect If you want to operate the Use either of the right-hand arrow Note: appliance via the Home Connect app buttons to select Install now. again, you must reconnect it to your home network and to the Home Connect app either automatically or manually. -
Page 56: About Data Protection
Home Connect functionality meets the basic requirements and other relevant provisions of the Directive 1999/5/EC. A detailed R&TTE Declaration of Conformity can be found online at www.siemens-home.com among the additional documents on the product page for your appliance. -
Page 57: Appliance Settings
Appliance settings Basic dosage: ■ Appliance settings i-Dos ô Basic 10 ml – 200 ml You can change the following appliance Set the basic dosage in accordance A p p l i a n c e s e t t i n g s settings: with the recommendation of the detergent manufacturer. -
Page 58: Sensors
Sensors Load sensor/display Sensors The load sensor detects the load level A utomatic load sensing in the washing machine when the door S e n s o r s is open. This is indicated by the bar Depending on the type of fabric and filling on the display panel. -
Page 59: Cleaning And Maintenance
Cleaning and maintenance Machine housing/control Cleaning and panel maintenance Wipe the housing and the control ■ Warning panel with a soft, damp cloth. C l e a n i n g a n d m a i n t e n a n c e Remove the detergent residue Danger of death! ■... -
Page 60: I-Dos Detergent Draw And Its Housing
Cleaning and maintenance i-Dos detergent draw and its The detergent drawer can be removed completely to allow you to housing clean to dispensers after you have emptied them. Emptying the dispensers: a) Empty the dispensers before The dispensers have emptying removing the drawer. -
Page 61: The Drain Pump Is Blocked, Emergency Draining
Cleaning and maintenance – Protect the rear drawer connector The drain pump is blocked, against water, detergent or fabric- emergency draining softener residue; if necessary, clean the outer surfaces with a Warning soft, damp cloth. Dry before Risk of scalding! putting back in. -
Page 62: The Drain Hose At The Siphon Is Blocked
Cleaning and maintenance Filter in the water supply blocked First, reduce the water pressure in the supply hose: Turn off the tap. Select any programme (except Rinse/Spin/Empty). Put the service flap back on, lock it Press the Ü button. Allow the into place and close it. -
Page 63: Faults And What To Do About Them
Faults and what to do about them. Caution! Faults and what to do Water damage about them. Any escaping water may cause water damage. Emergency release Do not open the door if water can be F a u l t s a n d w h a t t o d o a b o u t t h e m . seen through the glass. -
Page 64: Information On The Display Panel
Faults and what to do about them. Information on the display panel Display Cause/remedy Top up the i-Dos The i-Dos dispensers are below the minimum fill level; top up ~ Page 47. iIô, ô container i-Dos iIô, i-Dos ô Set i-Dos iIô, i-Dos ô to Off. error;... - Page 65 Faults and what to do about them. Display Cause/remedy Drum care This instruction reminds you to run the Drum clean 90 °C programme or a 60 °C information: programme to clean and care for the drum and the outer tub. Notes Run the programme without laundry.
-
Page 66: Faults And What To Do About Them
Faults and what to do about them. Faults and what to do about them. Faults Cause/remedy Water is leaking from the Attach the drain hose correctly or replace it. ■ machine. Tighten the threaded joint on the supply hose. ■ The appliance is not filling Have you pressed the Ü... - Page 67 Faults and what to do about them. Faults Cause/remedy The programme is taking Not a fault – the unbalanced load detection system is adjusting an ■ longer than usual. imbalance by repeatedly redistributing the laundry. Not a fault – the foam detection system is active – a rinse cycle has been ■...
-
Page 68: After-Sales Service
After-sales service Faults Cause/remedy In the "Reload" status, Ü The water level is too high. It is not possible to add laundry. Close the door ■ flashes very quickly and a immediately, if necessary. signal sounds. Press the Ü button to resume the programme. ■... -
Page 69: Consumption Rates
Consumption rates Consumption rates Energy and water consumption, programme duration and C o n s u m p t i o n r a t e s residual moisture for the main washing programmes (approximate values) Programme Load Energy Water Programme consumption* consumption*... -
Page 70: Efficiency Test Programmes For Cotton Fabrics
Technical data Efficiency test programmes for cotton fabrics The following programmes (standard programmes, indicated by ü) are suitable for cleaning normally soiled cotton fabrics and are the most efficient with respect to combined energy and water consumption. Standard programmes for cottons in accordance with Regulation (EU) no. 1015/2010 Programme + temperature Load Approximate programme... -
Page 71: Aqua-Stop Warranty
Aqua-Stop warranty Aqua-Stop warranty Only for appliances with Aqua-Stop A q u a - S t o p w a r r a n t y In addition to warranty claims against the vendor based on the purchase agreement and to our appliance warranty, we will provide compensation under the following conditions: If water damage is caused due to a... - Page 72 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) You can find the contact information for all countries in the attached after-sales service directory. BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München GERMANY siemens-home.com *9001186508* 9001186508 (9603)