Toro Recycler 20018 Operator's Manual
22" lawn mower
Hide thumbs
Also See for Recycler 20018:
- Service manual (144 pages) ,
- Operator's manual addendum (2 pages)
Table of Contents
Advertisement
Quick Links
22 Recycler
Lawn Mower
Model No. 20018—Serial No. 220000001 and Up
Introduction
Read this manual carefully to learn how to operate
and maintain your product properly and to avoid injury
and product damage. You are responsible for
operating the product properly and safely.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model
and serial numbers of your product ready. The
illustration below identifies the location of the model
and serial numbers on the product. Write the
numbers in the space provided below:
Model #:
Serial #:
This manual identifies potential hazards and has
safety messages identified by the following words:
Danger signals an extreme hazard that will
cause serious injury or death if you do not follow
the recommended precautions.
Warning signals a hazard that may cause
serious injury or death if you do not follow the
recommended precautions.
Caution signals a hazard that may cause minor
or moderate injury if you do not follow the
recommended precautions.
This manual uses two other words to highlight
information. Important: calls attention to special
mechanical information and Note: emphasizes
general information worthy of special attention.
Warning
The engine exhaust from this product contains
chemicals known to the State of California to
cause cancer, birth defects, or other reproductive
harm.
Important: This engine is not equipped with a spark
arrester muffler. It is a violation of California Public
Resource Code Section 4442 to use or operate this
engine on any forest-covered, brush-covered or
grass-covered land. Other states or federal areas
may have similar laws.
Printed in USA
Original Instructions (EN)
This spark ignition system complies with Canadian
ICES-002.
The enclosed Engine Owner's Manual is supplied for
information regarding The U.S. Environmental
Protection Agency (EPA) and the California Emission
Control Regulation of emission systems, maintenance
and warranty. Replacements may be ordered through
the engine manufacturer.
Safety
This lawn mower meets or exceeds the CPSC blade
safety requirements for walk-behind rotary lawn
mowers and the B71.1 specifications of the American
National Standards Institute in effect at the time of
production.
Read and understand the contents of this manual
before the engine is ever started.
This is the safety alert symbol. It is used to
m-5607
alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol
to avoid possible injury or death.
Improperly using or maintaining this mower
could result in injury or death. To reduce this
potential, comply with the following safety
instructions.
The following instructions have been adapted from
the ANSI/OPEI standard B71.1—1998.
General Operation
Read, understand, and follow all instructions on
the machine and in the manual. Be thoroughly
familiar with the controls and the proper use of
the mower before starting.
Do not put hands or feet near or under rotating
parts. Keep clear of the discharge opening at all
times.
Only allow responsible individuals, who are
familiar with the instructions, to operate the
mower.
Clear the area of objects such as rocks, toys,
wire, bones, sticks etc., which could be picked up
and thrown by the blade.
Be sure the area is clear of other people before
mowing. Stop mower if anyone enters the area.
3328-284
Form No. 3328-284
Operator's Manual
2002 by The Toro Company
All Rights Reserved
Advertisement
Table of Contents
Related Manuals for Toro Recycler 20018
Summary of Contents for Toro Recycler 20018
- Page 1 Whenever you need service, genuine Toro parts, or the engine manufacturer. additional information, contact an Authorized Service Dealer or Toro Customer Service and have the model and serial numbers of your product ready. The Safety illustration below identifies the location of the model and serial numbers on the product.
-
Page 2: Slope Operation
Be alert and turn mower off if children enter the See the Toro instructions for proper operation and area. installation of accessories. Only use Toro accessories. -
Page 3: Safety/Instruction Decals
Frequently check components and replace with genuine Toro parts, when necessary. Safety/Instruction Decals Important: Safety and instruction decals are located near areas of potential danger. Replace damaged decals. 104-7953... -
Page 4: Product Overview
Product Overview Setup Important: Remove and discard the protective plastic sheet that covers the engine. Unfolding the Handle Warning Folding or unfolding the handle improperly can damage the cables, causing an unsafe operating condition. Do not damage the cables when folding or unfolding the handle. -
Page 5: Filling The Engine With Oil
Filling the Engine with Oil Installing the Fuse Your mower does not come with oil in the engine, Your mower comes with a 40-amp fuse that protects but it does come with a 20 oz. (0.59 l) bottle of oil. the electric start system. -
Page 6: Filling The Fuel Tank
Filling the Fuel Tank Checking the Engine Oil Level Fill the fuel tank with fresh unleaded regular gasoline from a major name-brand service station. 1. Remove the dipstick, wipe it clean, and fully Important: To reduce starting problems next season, install the dipstick. - Page 7 Installing/Removing the Installing/Removing the Grass Bag Side Discharge Chute 1. Open the rear door. 1. Lift up the lock on the side discharge door. m-5583 m-5586 2. Lift open the side 2. Remove the rear discharge door. discharge plug. m-5584 m-5587 3.
-
Page 8: Operation
Using the Self-propel Drive Operation To operate the self-propel drive, simply walk with your Starting the Engine hands on the upper handle and your elbows at your sides, and the mower will automatically keep pace 1. Firmly push in the with you. -
Page 9: Operating Tips
Replace the blade when necessary with an original Toro replacement blade. Cutting Grass Cut only about a third of the grass blade at a time. Do not cut below the 2-inch (51 mm) setting unless the grass is sparse or it is late fall when grass growth begins to slow down. -
Page 10: Recommended Maintenance Schedule
Maintenance Note: Determine the left and right sides of the machine by standing in the operating position. Recommended Maintenance Schedule Important: Refer to your engine operator’s manual for additional maintenance procedures. Maintenance Service Maintenance Procedure Interval Check the engine oil level. Each Use Remove grass clippings and dirt from under the housing. -
Page 11: Changing The Engine Oil
Changing the Engine Oil Charging the Battery Change the engine oil after the first 2 operating hours; change it yearly thereafter. Warning Run the engine a few minutes before changing the oil to warm it. Warm oil flows better and carries more Battery posts, terminals, and related accessories contaminants. -
Page 12: Replacing The Blade
Replacing the Blade Curved or Captive Washer For the curved or captive washer (A), torque the Important: You will need a torque wrench to blade bolt to 60 ft-lb (82 N m). install the blade properly. If you do not have a torque wrench or are uncomfortable performing this procedure, contact an Authorized Service Dealer. -
Page 13: Cleaning The Mower
Cleaning the Mower Folding the Handle 1. With the engine running on a flat paved Warning surface, spray a stream of water in front of the Folding or unfolding the handle improperly can right rear wheel. damage the cables, causing an unsafe operating 1093 condition. - Page 14 3328-284...
- Page 15 3328-284...
- Page 16 Instructions for Obtaining Warranty Service If you think that your Toro Product contains a defect in materials or workmanship, or if a normal, able-bodied adult can no longer start your product’s engine in one or two pulls, follow this procedure: 1.