Page 1
R32 or R410A OWNER’S MANUAL ENGLISH ENGLISH AIR CONDITIONER (SPLIT TYPE) For general public use Indoor unit RAS-B10, 13, 18J2FVG-E Outdoor unit RAS-10, 13, 18J2AVSG-E RAS-10, 13J2AVSG-E1 1112150197-2...
PRECAUTIONS FOR SAFETY Read the precautions in this manual carefully before This appliance is fi lled with R32. operating the unit. ■ Warning indications on the air conditioner unit Warning indication Description CAUTION CAUTION BURST HAZARD BURST HAZARD Open the service valves before the operation, Open the service valves before the operation, otherwise there might be the burst.
Page 3
PRECAUTIONS FOR SAFETY ● This appliance is not intended for use by person (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. ●...
Page 4
INDOOR UNIT DISPLAY & UNIT AIR FLOW DIRECTION OPERATION PANEL This indoor unit can be operated with the unit operation panel or using remote control. Press : Move the louver in the Operational contents will be followed the one which was operated later. desired vertical direction.
Page 5
COMFORT SLEEP OPERATION FLOOR WARMING OPERATION For comfortable sleep, automatically control air fl ow and automatically turn Heating will operate with downward blowing only. OFF (Except in DRY mode). Temperature of air outlet will be higher than usual. FLOOR Press : Start and stop the operation.
Page 6
CHANGE AIR OUTLET GRILLE ON Temp. Outdoor Temperature Room Temperature Operation STABLE TIME (COOLING ONLY) Heating -15°C ~ 24°C Less than 28°C On cooling operation, whichever air outlet is set, only Upper is used when the Cooling -15°C ~ 46°C 21°C ~ 32°C room temperature approaches the set temperature.
Page 7
WEEKLY TIMER OPERATION How to set WEEKLY TIMER *Point remote control at air conditioner receiving module then, press SET button until you hear the “BeepBeep” 1. Press to enter WEEKLY TIMER setting. sound. This means the setting operation has been completed.