Solving Setup Problems; Noise After Filling The Ink - Epson EcoTank ET-M1170 User Manual

Table of Contents

6. Do one of the following, depending on the results of the product check:

• If the page prints and the nozzle check pattern is complete, the product is operating properly. Any

operation problem you may have could be caused by your computer, cable, software, or selected

settings. Check the other solutions in this book or try uninstalling and reinstalling your printer

software.

• If the page prints but the nozzle check pattern has gaps, clean or align the print head.

• If the page does not print, the product may have a problem. Check the other solutions in this

manual. If they do not work, contact Epson.

Parent topic:

Related concepts

Print Head Nozzle Check

Print Head Cleaning

Print Head Alignment

Uninstall Your Product Software

Related references

Where to Get Help

Solving Setup Problems

Check these sections if you have problems while setting up your product.

Software Installation Problems

Parent topic:

Noise After Filling the Ink

If you hear noises from your product after filling the ink tank with ink, check these solutions:

• The first time you fill the tank with ink, the product must charge its print head. Wait until charging

finishes before you turn off the product, or it may charge improperly and use excess ink the next time

you turn it on. Your product is finished charging the print head when the

• If the product's print head stops moving or making noise, and the charging process has not finished,

turn off your product. Turn it back on and check to see if charging is still in progress. If it is still in

progress, contact Epson for help.

Solving Problems

134

power light stops flashing.

Table of Contents

Show Quick Links

Table of Contents