Table of Contents
Advertisement
Onboard a Device with Low-Touch Provisioning
modem. If after adjusting the network cable, the device does not reach the Cisco cloud after about 10 more
minutes, call your IT department.
What to do next
• Communicate with your IT department to confirm your onboarding timeline and activities. You should
• After you complete this task, your CDO administrator will be able to configure and manage the device
Onboard a Device with Low-Touch Provisioning
Onboard the threat defense using low-touch provisioning and the device serial number.
Procedure
Step 1
In the CDO navigation pane, click Inventory, then click the blue plus button (
Step 2
Select the FTD tile.
Step 3
Under Management Mode, be sure FTD is selected.
At any point after selecting FTD as the management mode, you can click Manage Smart License to enroll
in or modify the existing smart licenses available for your device. See
which licenses are available.
Step 4
Select Use Serial Number as the onboarding method.
Figure 43: Use Serial Number
Step 5
In the Connection area, enter the Device Serial Number and the Device Name and then click Next.
Step 6
In the Password Reset area, click the Yes, this new device has never been logged into or configured for
a manager radio button, and click Next.
Step 7
For the Policy Assignment, use the drop-down menu to choose an access control policy for the device. If you
have no policies configured, choose the Default Access Control Policy.
Step 8
For the Subscription License, check each of the feature licenses you want to enable. Click Next.
Cisco Firepower 1010 Getting Started Guide
132
have a communication plan in place with the CDO administrator at your central headquarters.
remotely. You're done.
Threat Defense Deployment with CDO
) to Onboard a device.
Obtain Licenses, on page 122
to see
Advertisement
Chapters
Table of Contents
