Softap - LG UR76 Series Installation Manual

Hide thumbs Also See for UR76 Series:

Installation manual (81 pages)

Installation manual (68 pages)

Installation manual (68 pages)

Table Of Contents

Table of Contents

SoftAP

(Depending on model)

• SoftAP is similar to Access Point. When you enable this function, TV acts as an Access Point.

• Regardless of the Instant On mode, the SoftAP setting stays unchanged after power off/on. (Depending on model)

Use Default

• If you want to use default password(this password was generated randomly), you must select 'Enable' in this item.

Security Key

• If you want to change default password, you need to change 'Use Default' value into 'Disable' .

Wi-Fi Signal Strength

• You can control wireless signal strength on SoftAP. This is controlled by 5 step. If you select 'Not Used' , wireless signal strength will be set to Max value.

Wi-Fi Channel

• You can control the wireless channel in SoftAP mode. It is controlled by 1 to 11 channels(2.4GHz). The 5GHz channel is controlled by the channel

supported by the country where it is set. However, DFS channels cannot be set. If you select'Auto' , the SoftAP' s wireless channel is set to a random

channel.

Mode

(Depending on model)

• You can select NAT(Network address translation) mode and Bridge mode for Soft AP.

Security Type

(Depending on model)

• This menu is activated only when Bridge mode is selected.

• Type of security authentication protocol required for wireless connectivity

• WPA2-PSK, 802.1X EAP, and OPEN are available from this menu.

Radius Server IP, Radius Server Port, Radius Server Key

(Depending on model)

• This menu is activated only when Bridge mode is selected and 802.1X EAP is selected.

• If you want to use 802.1X, you must enter the IP address of the authentication server that manages the user' s credentials, as well as the Port and Key

information.

VLAN ID

(Depending on model)

• This menu is activated only when Bridge mode is selected.

• SoftAP VLAN ID is needed when you want to separate TV packets and SoftAP packets.

• The packets via SoftAP are tagged when the packets go through LAN port to external network.

• It is not compatible with Network

VLAN ID. (SoftAP VLAN is not available if LAN port or AUX port in VLAN ID is set.)

Table of Contents