Replacing The Hydraulic Pump Drive Belt - Toro 74915 Operator's Manual

With 60in or 72in turbo force side discharge mower

Hide thumbs Also See for 74915:

Table of Contents

Figure 76

1. Clutch pulley

2. Mower belt

3. Spring loaded idler pulley

4. Ratchet

10. Install the belt guide on the idler arm shown in

Figure 76.

11. Using the ratchet in the square hole, install the idler

spring (Figure 76).

Make sure the spring ends are seated in the anchor

grooves.

12. Install the belt covers (Figure 77).

5. Square hole in the idler

arm for the ratchet

6. Idler grease zerk

7. Belt guide

1. Position the belt cover

2. Slide belt cover under the

side catches

Replacing the Hydraulic Pump

Drive Belt

1. Disengage the PTO and set the parking brake.

2. Stop the engine, remove the key, and wait for all moving

parts to stop before leaving the operating position.

3. Remove mower belt. Refer to Replacing the Mower

Belt in Maintenance.

4. Raise the machine and support it with jack stands

(Figure 78).

Figure 77

3. Ensure the tab is under

the metal catch

Table of Contents

Z master professional 5000 series 74916