Advertisement
Quick Links
This newly designed battery-powered tap timer is easy to program with simple dial settings. The ball valve mechanism provides
reliable and consistent performance for home, garden hose and drip irrigation systems.
Key Features
• Connects to 3/4" hose bib or Y ball valve
• Inlet: 3/4" FHT (female hose thread)
• Outlet: 3/4" MHT (male hose thread)
• Powered by two AA alkaline batteries (not included)
• 11 frequency and duration settings provide
customized combinations
• Both programmed and manual watering options
are available
• Durable and consistent watering control utilizing
ball valve design
• Low battery indicator
• Time delay function up to 12 hours per day
• Max. & Min. Operating Pressure: 125/5 PSI
Safety Guidelines
• This timer is designed for residential outdoor
watering use only.
• Detach the timer from the faucet tap at the end of
the watering season.
• Do not use with water exceeding 100°F (38°C)
or with pressure exceeding 125 PSI.
• Drain all water and remove batteries before
storage.
Installation
1. Hold the controller with the battery compartment facing
you (Figure 1).
2. Unscrew the battery cover and insert two AA alkaline
batteries. Replace the cover and fasten the screws.
Ensure that the battery compartment stays dry while
installing the batteries.
3. Before attaching the timer onto the outdoor faucet,
manually check the timer operation by turning the
"Run Time" knob to the "ON" position. The indicator
light will flash once in "green". This indicates that the
batteries have been installed correctly and the timer is
ready for use. If the battery power is low, the indicator
will continuously flash in "red" until the power runs out.
4. Proceed with programming the timer prior to connecting
to the tap (see "Set Watering Run Time" and "Set Water-
ing Frequency").
5. Once the timer has been programmed, hold the unit
steady and hand-tighten the collar onto the faucet/tap
until it is secured. Be sure all connections are secure
before turning on the water. Do not use a wrench or
pliers, and avoid over-tightening. Turn on the faucet/tap
and the timer is ready to use.
All manuals and user guides at all-guides.com
Low-Pressure Tap Timer
Model 53453 • Installation Instructions
Figure 1
IMPORTANT: READ ALL
INSTRUCTIONS BEFORE
INSTALLING BATTERIES.
SAVE THIS INSTRUCTION FOR
FUTURE REFERENCE.
3/4" Swivel Faucet Coupling
Run Time Dial
Low Battery Indicator Light
Manual Watering "ON"
Frequency Dial
Delay Start Indicator
3/4" Hose Connector
Advertisement
Related Manuals for Toro 53453
Summary of Contents for Toro 53453
- Page 1 All manuals and user guides at all-guides.com Low-Pressure Tap Timer Model 53453 • Installation Instructions This newly designed battery-powered tap timer is easy to program with simple dial settings. The ball valve mechanism provides reliable and consistent performance for home, garden hose and drip irrigation systems.
- Page 2 • If red indicator is lit, change the batteries and reset the program Warning: Do not use a wrench to tighten the swivel faucet coupling. It might cause damage to the swivel coupling of the timer. © 2018 The Toro Company Part No. 373-0969 Revision A...