Table of Contents
Advertisement
Quick Links
QUICK START GUIDE
EDGE AC SHORT CIRCUIT CURRENT LIMITER
G390 – 1600480775A
•
SAVE THESE INSTRUCTIONS – This document contains
important safety and installation instructions for the
Edge Cabinet input current limiter accessory
•
Equipment is intended for installation only in restricted
access areas.
•
Rules and Regulations – Follow all national and local rules
and regulations when making field connections.
•
This equipment is not suitable for use in locations where
children are likely to be present.
Document – 8600481911P
Page 1
© 2023 ABB. All rights reserved.
•
SAUVEGARDEZ CES INSTRUCTIONS – Ce document
contient des instructions de sécurité et d'utilisation
importantes
d'entrée Edge Cabinet
•
L'équipement est destiné à être installé uniquement dans
des zones à accès restreint.
•
Règles et règlements – Suivez toutes les règles et
réglementations nationales et locales lorsque vous
établissez des connexions sur le terrain.
•
Cet équipement ne convient pas à une utilisation dans
des endroits où des enfants sont susceptibles d'être
présents.
Edge_I-lim_G390_QSG
pour l'accessoire limiteur de courant
Version. 2.0
Advertisement
Table of Contents
Related Manuals for ABB G390
Summary of Contents for ABB G390
- Page 1 This equipment is not suitable for use in locations where children are likely to be present. • Cet équipement ne convient pas à une utilisation dans des endroits où des enfants sont susceptibles d’être présents. Document – 8600481911P Page 1 © 2023 ABB. All rights reserved. Edge_I-lim_G390_QSG Version. 2.0...
-
Page 2: Table Of Contents
Figure 11 Assembling top cover ......................10 Figure 12 AC cord wiring ........................10 Figure 13 Fuse blocks ..........................11 Figure 14 Clear removable panel ......................11 Figure 15 Cabinet grounding ......................... 11 Page 2 © 2023 ABB. All rights reserved. Edge_I-lim_G390_QSG Version. 2.0... -
Page 3: Important Safety Instructions
à la barre omnibus de mise à la terre de l'armoire principale. Remarque : La mise à la terre correcte de l'alimentation CA doit être vérifiée par un personnel qualifié. • Ne placez pas de matériaux combustibles directement au-dessus ou en dessous de l'équipement. Page 3 © 2023 ABB. All rights reserved. Edge_I-lim_G390_QSG Version. 2.0... -
Page 4: Precautions
Personnel with electronic medical devices need to be aware that proximity to DC power and distribution systems, including batteries and cables, typically found in telecommunications utility rooms, can affect medical electronic devices, such as pacemakers. Effects decrease with distance. Page 4 © 2023 ABB. All rights reserved. Edge_I-lim_G390_QSG Version. 2.0... - Page 5 CC, y compris les batteries et les câbles, que l'on trouve généralement dans les locaux techniques de télécommunications, peut affecter les appareils électroniques médicaux, tels que les stimulateurs cardiaques. Les effets diminuent avec la distance. Page 5 © 2023 ABB. All rights reserved. Edge_I-lim_G390_QSG Version. 2.0...
-
Page 6: Safety
The product ID label of the EDGECABG390 model is shown below. It includes the product serial number and input - output specifications of the cabinet. Figure 2 Product ID Label Information Customer Care +1 877 546-3243 Page 6 © 2023 ABB. All rights reserved. Edge_I-lim_G390_QSG Version. 2.0... -
Page 7: Wiring Diagram
QUICK START GUIDE Wiring diagram Figure 3 wiring diagram Page 7 © 2023 ABB. All rights reserved. Edge_I-lim_G390_QSG Version. 2.0... -
Page 8: Information - Tools Required
The top of the Edge cabinet is shown here. The relevant areas are noted: AC input panel which contains two twist-n-lock AC input receptacles for AC input power. 2. Center back panel to be removed and replaced with Edge AC current limiter G390 assembly. Two AC input... -
Page 9: Step 1. Disassemble Existing Ac Connections
3. Remove the 4 screws on the back center panel and then remove the panel. Note: Both the AC input panel and the back center panel will be discarded. Figure 8 Central panel removed Page 9 © 2023 ABB. All rights reserved. Edge_I-lim_G390_QSG Version. 2.0... -
Page 10: Step 3. Assemble Edgecabg390 To Cabinet
Note: 2-hole compression lugs are also provided which can be used instead of the single-hole mechanical lug. Figure 12 AC cord wiring Page 10 © 2023 ABB. All rights reserved. Edge_I-lim_G390_QSG Version. 2.0... -
Page 11: Step 4. Final Assembly
2. Attach clear, removable panel to the top cover. Torque to 10in-lb. Figure 14 Clear removable panel 3. Connect ground wire provided in the G390 kit to the ground lug located on the bottom of the base panel assembly. Connect the other end of the ground wire to the cabinet ground bus. - Page 12 Change History (excludes grammar & clarifications) Version Date Description of the change 05-17-2023 Initial release Updated wiring diagram, Updated ordering code of 06-21-2023 fuses in “Check for deliveries” section Page 12 © 2023 ABB. All rights reserved. Edge_I-lim_G390_QSG Version. 2.0...
- Page 13 With regard parties or utilization of its contents – in whole or in parts – is to purchase orders, the agreed particulars shall prevail. ABB forbidden without prior written consent of ABB. does not accept any responsibility whatsoever for potential errors or possible lack of information in this Copyright©...