Installing and Removing a Blank Line Card
Step 2
This procedure shows how to remove a blank line card in a line card slot:
a) Press the two latches on the sides of a blank line card using forefingers so that the blank line card is unlocked from
the brackets on the side of the chassis. Slightly pull out the blank line card.
Note
The latches are stiff and may require extra force to fully disengage with the brackets on the sides of the
chassis.
b) Hold the blank line card using both the hands and pull the blank line card completely out of the chassis slot.
Cisco Nexus 9504 NX-OS Mode Switch Hardware Installation Guide
82
Replacing or Installing Modules, Fan Trays, and Power Supplies