Control Panel and Programme Table............29 Extra Options and Functions ................33 OPERATION-DRYER Operation Overview..................36 Preparing the Laundry ..................37 Control Panel and Programme Table............39 Extra Options and Functions ................44 SMART FUNCTIONS Using LG ThinQ Application................47 Smart Diagnosis ....................49 MAINTENANCE Washer ......................51 Dryer ........................54...
SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USE The following safety guidelines are intended to prevent unforeseen risks or damage from unsafe or incorrect operation of the appliance. The guidelines are separated into ‘WARNING’ and ‘CAUTION’ as described below. Safety Messages This symbol is displayed to indicate matters and operations that can cause risk.
Page 5
SAFETY INSTRUCTIONS • Children should be supervised to ensure that they do not play with the appliance. • The inlet water pressure must be between 50 kPa and 800 kPa. • Use a new hose or hose-set supplied with the appliance. Reusing old hoses can cause a water leak and subsequent property damage.
Page 6
SAFETY INSTRUCTIONS • The appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by a utility. • Remove clothes from the product immediately when drying is complete or the power is turned off during the drying process.
Page 7
SAFETY INSTRUCTIONS power plug. The power plug must be plugged into an appropriate outlet socket that is installed and earthed / grounded in accordance with all local codes and ordinances. • Improper connection of the equipment-grounding conductor can result in risk of electric shock. Check with a qualified electrician or service personnel if you are in doubt as to whether the appliance is properly grounded.
Page 8
• Do not touch the door during a high temperature programme. • In case of a water leak from the appliance or flood, disconnect the power plug and contact the LG Electronics customer information centre. • Turn off water taps to relieve pressure on hoses and valves and to minimize leakage if a break or rupture should occur.
Page 9
• Only qualified service personnel from LG Electronics service centre should disassemble, repair, or modify the appliance. Contact an LG Electronics customer information centre if you move and install the appliance in a different location.
INSTALLATION INSTALLATION Parts and Specifications NOTE • Appearance and specifications may change without notice to improve the quality of the appliance. Front View Washer Drum Washer Door Magnet Drain Hose Drain Pump Filter Drain Pump Filter Cover Leveling Feet Rear View Control Panel Lint Filter Dryer Drum...
Page 11
INSTALLATION Power Cord (for Dryer) Drain Hole (for Dryer) Cold Water Inlet (for Washer) Shipping Bolts Drain Hose (for Washer) Power Cord (for Washer)
Page 12
INSTALLATION Accessories Connecting Supply Hose Water Drain Hose (for Band Clamps (5 EA) (for Washer) Dryer) Cable Ties (3 EA) Caps for Covering Transit Spanner Bolt Holes Anti-slip Sheets (4 EA) Elbow Bracket for Dry Rack Securing Drain Hose Drain Hose Connector Short Drain Hose Screws (10 EA) Leg Stoppers (2 EA)
Page 13
INSTALLATION Model WT2116SH** Maximum Power 2000-2350 W (Wash) / 1350-1400 W (Dry) Permissible Inlet Water pressure 50 KPa ~ 800 KPa (0.5~8.0 kgf/cm²) Allowable temperature 5 - 35 ℃...
INSTALLATION Installation Place 30 cm Requirements 70 cm Before installing the appliance, check the following information to make sure that the appliance 5 cm should be installed in a correct place. 20 cm Installation Location 77 cm • This appliance must be installed on firm flooring 140 cm to minimize vibration during the spin cycle.
Page 15
• You can purchase rubber cups (part No. MJB65174401, MJB65174501) from the LG • The appliance performs best at a room service centre. temperature of 23 ℃.
Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local authorised LG repairer. • The power plug must be plugged into an appropriate outlet socket that is installed and grounded/earthed in accordance with all local codes and ordinances.
INSTALLATION Checking the Rubber Seal • Locate the hole caps included in the accessory pack or attached on the back. Two rubber seals are supplied with the water supply hose. They are used for preventing water leaks. Connection to taps is sufficiently tight. •...
Page 18
INSTALLATION Remove the guide plate if the tap is too large Remove the guide plate if the tap is too large to fit the adapter. to fit the adapter. Push the adapter onto the end of the tap so Push the adapter onto the end of the tap so that the rubber seal is connected to be that the rubber seal is connected to be watertight.
INSTALLATION Connecting the Hose to the Insert the hose clamp onto the drain hose of the dryer. Appliance Screw the supply hose to the water inlet valve on the back of the appliance. Connect the drain hose of the dryer and secure the hose clamp.
Page 20
INSTALLATION Use the provided tie strap to secure the 2 band clamp to keep the washer hose in drain hoses in place. place. Use the band clamp on the short drain hose (included) to attach it to the bottom opening of the drain hose connector.
INSTALLATION • Make sure the drain hoses are not kinked or • If the appliance rocks when pushing the top pinched. This is a potential cause of drainage plate of the appliance diagonally, adjust the feet problems or noise. again. •...
Page 22
• Do not install the washing machine on a plinth, purchased. stand or elevated surface unless it is If you install the appliance on a slippery surface, it manufactured by LG Electronics for use with this may move because of excessive vibration. model. Incorrect levelling may cause malfunction through noise and vibration.
INSTALLATION Disassembly Pull the control panel forward to remove it. Disassembling the Washer and Dryer The washer and dryer cannot be disassembled and installed for use side by side. If it is necessary to disassemble the appliance in order to move or reinstall it, follow these instructions.
Page 24
INSTALLATION Lift the dryer and separate it from the washer. WARNING • Protect your hands and arms from sharp edges of the panel frame exposed on the top of the washer. • To avoid strain injuries, use 2 or more people to lift the dryer.
OPERATION-WASHER OPERATION-WASHER Operation Overview CAUTION Using the Washer • Remove items from the flexible door seal gasket to prevent clothing and door seal damage. Before the first wash, select the Normal wash programme and add a half amount of the detergent.
OPERATION-WASHER • When the cycle is finished, a melody will Symbol Wash / Fabric type sound. Immediately remove your clothing from the appliance to reduce wrinkling. • Do not wash Preparing the Wash Load NOTE • The dashes under the symbol give you Sorting the Clothes information about the type of fabric and the maximum allowance of mechanical stress.
OPERATION-WASHER Adding Detergents and NOTE Softeners • Do not let the detergent harden. Doing so may lead to blockages, poor rinse performance or Detergent Dosage odour. • Full load: According to manufacturer’s • Detergent should be used according to the recommendation.
Page 28
OPERATION-WASHER Adding Detergent Tablets Fabric Softener Compartment This compartment holds liquid fabric softener, Detergent tablets can also be used when washing. which is automatically dispensed during the final rinse cycle. Either powdered or liquid fabric Open the door and put detergent tablets into softener may be used.
• To use the extra functions, press and hold the corresponding button for 3 seconds. The corresponding symbol lights up in the display. Remote Start With the LG ThinQ app, you can use a smartphone to control your appliance remotely. • In order to use this function, refer to SMART FUNCTIONS. Wi-Fi Press and hold the Wash button for 3 seconds to initiate the connection of the appliance to the LG ThinQ application.
Page 30
Beep sound can be turned on or off only through the LG ThinQ application.
Page 31
OPERATION-WASHER Washing Programme Normal 40 °C (Cold to 60 °C) Max. Load: Rating Description Washes normally soiled clothes by combining various drum motions. • Pressing the Start/Pause button without selecting a programme will cause the Normal programme to begin immediately, using the default settings. Note for test •...
Page 32
OPERATION-WASHER Extra Options Programme TurboWash Steam Normal Duvet Wool Hygiene Quick Wash *1 This option is automatically included in the programme. NOTE • Add Item option can be selected for every washing programme in this table.
OPERATION-WASHER Extra Options and Add detergent. Functions Select a washing programme. Customizing a Washing Programme Customize the washing programme (Wash, Rinse, Spin, and Temp.) as necessary. Each programme has default settings that are selected automatically. You may also customize these settings using these buttons. Press the Start/Pause button.
Page 34
OPERATION-WASHER Select a washing programme. NOTE • the Prepare to Dry function will not be activated Change the washing programme (Temp., in the following cases: Rinse or Spin) as necessary. - If you don't start the dryer within 15 minutes after the washing programme has finished Press the Steam or TurboWash button.
Page 35
OPERATION-WASHER Press and hold the Tub Clean button for 3 Press and hold the Spin button for 3 seconds to seconds as necessary. deactivate this function. Open the door after it unlocks itself and add or remove necessary clothing items. Close the door and press the Start/Pause button.
OPERATION-DRYER OPERATION-DRYER Operation Overview • If you press the Start/Pause button without choosing a programme, the appliance will proceed with the Normal programme. Using the Dryer Please refer to the programme table for the detailed information. Before the first cycle, set the appliance to dry for 5 minutes to warm up the drum.
OPERATION-DRYER remaining time will then continue when it is the WARNING actual time that remains. • Make sure to empty all pockets. Items such as • For safety reasons, do not allow children or animals to enter the appliance. It may cause nails, hair clips, matches, pens, coins and keys damage or injury.
Page 38
OPERATION-DRYER Checking the Fabric Care Label The symbols on the fabric care label tell you about the fabric content of your clothes and how it should be dried. Symbol Description Tumble Dry Permanent Press / Crease Resistant Gentle / Delicate Do not Tumble Dry Do not Dry High Heating...
OPERATION-DRYER Control Panel and Programme Table Control Panel Features Description Power On/Off button • Press the button to turn the appliance on. Hold again to turn the appliance off. • Pressing the Power button during a programme will cancel that programme and any load settings will be lost.
Page 40
This function can be turned on or off only through the LG ThinQ application.
Page 41
OPERATION-DRYER Description lights up or blinks while the condenser is being washed or the thawing mode is operating. • Condenser cleaning operates every 30 drying cycles. NOTE • Drying times will be longer than usual when the condenser is being washed. •...
Page 42
OPERATION-DRYER Max. Load Programme Wool 1 kg Capacity Description Use this programme for drying shrinkable woolen or hand-washable items requiring delicate care. Dry Level Not adjustable Max. Load Programme Bedding Refresh 3 kg Capacity Description Remove dust from the beddings with airflow. Dry Level Not adjustable Max.
Page 43
OPERATION-DRYER NOTE • Only Normal programme is available to select dryness level. • Anti Crease option can be selected for every drying programme. • The estimated time remaining will change if you select extra options for the programme.
OPERATION-DRYER Extra Options and Follow the next steps to customize a drying programme: Functions Prepare the clothes and load the drum. Customizing a Drying Programme Press the Power button. Each programme has default settings that are selected automatically. You may also customize Select a drying programme.
Page 45
Child Lock your model. Please contact LG Electronics Use this option to disable the controls. This Customer Information Centre or visit the LG function can prevent children from changing cycles Website at http://www.lg.com for purchase. or operating the appliance.
Page 46
OPERATION-DRYER Press and hold the Time Dry button for 3 seconds to activate this function. • A beeper will sound, and will appear on the display. Unlocking the Control Panel Turn on the power. Press and hold the Time Dry button for 3 seconds to deactivate this function.
You can download new and special cycles that are notifications on a smartphone. The notifications not included in the basic cycles on the appliance. are triggered even if the LG ThinQ application is A variety of specialty cycles specific to the appliance off.
Page 48
You can also monitor your cycle operation so you know how much time is left in the • LG ThinQ is not responsible for any network cycle. connection problems or any faults, malfunctions, or errors caused by network Using this function connection.
GPL, LGPL, MPL, and other open source licenses that have the obligation to disclose source code, and to access all referred license Start a cycle from the LG ThinQ application on terms, copyright notices and other relevant your smartphone.
Page 50
If you experience a problem with your Wi-Fi equipped appliance, it can transmit troubleshooting data to a smartphone using the LG ThinQ application. • Launch the LG ThinQ application and select the Smart Diagnosis feature in the menu. Follow the instructions provided in the LG ThinQ application.
MAINTENANCE MAINTENANCE WARNING • Unplug the appliance before cleaning to avoid the risk of electric shock. Failure to follow this warning may result in serious injury, fire, electric shock, or death. • Never use harsh chemicals, abrasive cleaners, or solvents to clean the appliance. They may damage the finish.
Page 52
MAINTENANCE weeks in addition to the regularly prompted time (e.g. holiday), especially if there is no floor intervals. drain (gully) in the immediate vicinity. • error message will be displayed on the NOTE control panel when the water is not entering the detergent drawer.
Page 53
MAINTENANCE Open the cover cap and pull out the drain tube. check for build-up of cleaning products once or twice a month. Remove the detergent dispenser drawer by pulling the drawer straight out until the drawer stops. • Then gently pull the drawer outward while pressing hard the disengage button.
MAINTENANCE Dryer • Open the filter by unfolding it in the direction of the arrow. WARNING • Remove the power plug when you clean the appliance. Not removing the plug may result in electric shock. Clean a large cluster of lint first, then clean the Cleaning the Lint Filter residual lint using vacuum cleaner or washing under running water.
Page 55
MAINTENANCE Remove the inner filter. Wipe the sensors inside the drum. Open the outer filter by unfolding in the direction of the arrow grasping the top edge of the outer filter. Clean the residual lint using vacuum cleaner or washing under running water. CAUTION •...
Page 56
MAINTENANCE Reinsert both inner and outer filter and close WARNING the dryer's door. • For safety reasons, do not allow children or animals to enter the appliance. It may cause damage or injury. Using Condenser Clean Feature Turn on the appliance. The appliance washes lint, which builds up onto the surface of the condenser, automatically using Press the Condenser Care button.
Page 57
MAINTENANCE Press the Start/Pause button to start the Dry the clothes as usual. thawing mode. • Actual thawing time varies depending on the installation environment such as installation location and ambient temperatures of the appliance. Dry the clothes as usual. Thawing out the appliance manually Open the dryer's door and pull out both inner and outer filter.
Page 58
Operation of your appliance can lead to errors and malfunctions. The following tables contain possible causes and notes for resolving an error message or malfunction. It is recommended to read the tables carefully below in order to save your time and money that may cost for calling to LG Electronics service centre.
Page 59
• Close the door and make sure that nothing is caught under the door preventing it from closing completely. Door sensor malfunctions. • Close the door. Please call LG service centre. You can find your local LG service centre phone number in the warranty card. This is a control error.
Page 60
TROUBLESHOOTING Symptoms Possible Cause & Solution Thumping sound The clothes may be out of balance. • Pause the programme and redistribute the clothes after the door unlocks. Vibrating noise Package materials are not removed. • Remove package materials. The clothes may be unevenly distributed in the drum. •...
Page 61
TROUBLESHOOTING Symptoms Possible Cause & Solution Appliance does not Circuit breaker/fuse is tripped/blown. operate. • Check house circuit breakers/fuses. Replace fuses or reset breaker. The appliance should be on a dedicated branch circuit. The appliance will resume the programme where it stopped once power is restored. Control needs to be reset.
Page 62
TROUBLESHOOTING Symptoms Possible Cause & Solution Detergent is not Drain Pump Filter may be blocked. dispensed • Clean the Drain filter. incompletely or not dispensed at all. Cycle time is longer The load is too small. than usual. • Add more items to allow the appliance to balance the loads. Heavy articles are mixed with lighter items.
Page 63
TROUBLESHOOTING Performance Symptoms Possible Cause & Solution Poor stain removal Previously set stains. • Articles that have been previously washed may have stains which have been set. These stains may be difficult to remove and may require hand washing or pre-treating to aid in stain removal. Staining Bleach or softener is dispensed too soon.
Page 64
TROUBLESHOOTING Odour Symptoms Possible Cause & Solution Musty or mildewy Inside of drum is not cleaned properly. odour in appliance • Run the Tub Clean function regularly. Odours can occur if the drain hose is not properly installed, causing siphoning (water flowing back inside of the appliance). •...
Page 65
TROUBLESHOOTING Dryer Error Messages Symptoms Possible Cause & Solution The door has been opened while the appliance is in operation or the appliance is being operated without the door being closed properly. DOOR ERROR • Close the door completely. • If is not released, call for service.
Page 66
The door is closed while clothes or foreign substance is caught in the door. • Check if clothes or foreign substance is caught in the door before using the appliance. If water leaks continuously, contact the LG Electronics Customer Information Centre. Appliance runs and This is how the anti crease option works.
Page 67
TROUBLESHOOTING Symptoms Possible Cause & Solution Clothes take too long Appliance controls are not set properly. to dry. • Use the appropriate control settings for the type of load you are drying. Some loads may require an adjustment of the dry level setting for proper drying.
Page 68
TROUBLESHOOTING Symptoms Possible Cause & Solution Clothes are shrinking. Garment care instructions are not being followed. • To avoid shrinking your clothes, always consult and follow fabric care instructions. Some fabrics will naturally shrink when washed. Other fabrics can be washed but will shrink when dried in the appliance. Use a low or no heat setting.
Page 69
• Find the Wi-Fi network connected to your smartphone and remove it, then not connected to the register your appliance on LG ThinQ. Wi-Fi network. Mobile data for your smartphone is turned on. • Turn off the Mobile data of your smartphone and register the appliance using the Wi-Fi network.