hit counter script
Sony SLV-T2000 Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. VCR
  5. SLV-T2000
  6. Operating instructions manual
Sony SLV-T2000 Operating Instructions Manual

Sony SLV-T2000 Operating Instructions Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

3-860-334-11 (1)
Video Cassette
Recorder
Operating Instructions
PAL
H H H H H
SLV-T2000
©1997 by Sony Corporation

Advertisement

Table of Contents
loading

Related Manuals for Sony SLV-T2000

Summary of Contents for Sony SLV-T2000

  • Page 1 3-860-334-11 (1) Video Cassette Recorder Operating Instructions H H H H H SLV-T2000 ©1997 by Sony Corporation...
  • Page 2 41 Adjusting slow motion 42 Presetting channels 14, 19 V, W, X, Y, Z G-CODE recording 35 VPS (Video Programme System) 40 setting up 22 Quick timer 43 Guide channel setting 35 ZWEITON broadcasts 46 Sony Corporation Printed in Japan...
  • Page 3 Caution WARNING Television programmes, films, video tapes and To prevent fire or shock hazard, do not expose other materials may be copyrighted. the unit to rain or moisture. Unauthorized recording of such material may To avoid electrical shock, do not open the be contrary to the provisions of the copyright cabinet.

  • Page 4: Table Of Contents

    Table of contents Getting Started 4 Step 1: Unpacking 5 Step 2: Setting up the remote commander 9 Step 3: Connecting the VCR 12 Step 4: Tuning your TV to the VCR 14 Step 5: Setting up the VCR with EASY SET UP 18 Manual setup —...

  • Page 5: Getting Started

    Getting Started Step 1 Unpacking Check that you have received the following items with the VCR: • S-video cable • Remote commander • Mains lead (2) • R6 (size AA) batteries • Aerial cable • 21-pin adaptor • Audio / video cable Checking your model name The instructions in this manual are for the 2 models : SLV-T2000MN, T2000AS.

  • Page 6: Step 2: Setting Up The Remote Commander

    Using the remote commander You can use this remote commander to operate this Remote VCR and a Sony TV. Buttons sensor on the remote commander marked with a dot (•) can be used to operate your Sony TV. TV / VIDEO...
  • Page 7 Step 2 : Setting up the remote commander (continued) AUDIO Menu button MONITOR DISPLAY FASTEXT buttons TV/VIDEO Programme number buttons PROG+/–/ √ /◊ VOL+/– TV control buttons Press Turn the TV into standby or active mode u (on/standby) Select an input source of the TV either from TV/VIDEO aerial in or from line in Select the programme position of the TV...
  • Page 8 VTR 3: For Sony VHS format VCRs Controlling other TVs with the remote commander The remote commander is preprogrammed to control non- Sony TVs. If your TV is listed in the table on the next page, set the TV / appropriate manufacturer’s code VIDEO number.
  • Page 9 • If you enter a new code number, the code number previously entered will be erased. • When you replace the batteries of the remote commander, the code number automatically resets to 01 (Sony). Reset the appropriate code number. Getting Started...

  • Page 10: Step 3: Connecting The Vcr

    Step 3 Connecting the VCR to mains AC IN AERIAL IN AERIAL OUT : Signal flow AERIAL IN Aerial cable Disconnect the aerial cable from your TV and connect it to AERIAL IN on the rear AERIAL panel of the VCR. Connect AERIAL OUT of the VCR and AERIAL the aerial input of your TV using the...
  • Page 11 Step 3 : Connecting the VCR (continued) Additional connections To a TV that has a EURO-AV (Scart) connector This additional connection improves picture and sound quality. Connect the : LINE-1 (TV) EURO-AV TV as shown on the right. Whenever (Scart) you want to watch the VCR picture, press TV/VIDEO on the remote VMC-2121 EURO-AV cable (not supplied)
  • Page 12 To a TV that has an S-VIDEO connector The S-VIDEO connection in addition to the audio / video connection can LINE S VIDEO S VIDEO LINE OUT improve picture quality. S-Video cable (supplied) Audio/video cable (supplied) Note If your TV has an S-VIDEO / VIDEO selector switch, set this to the S-VIDEO position to view the picture from the S-VIDEO connector.

  • Page 13: Step 4: Tuning Your Tv To The Vcr

    Step 4 Tuning your TV to the VCR If you have connected your VCR to the TV using the EURO-AV cable, skip this step. Make sure to match the COMMAND MODE of the VCR and the remote commander. This VCR and remote commander are set to VTR3 at the factory.
  • Page 14 Press RF-CH. You have now tuned your TV to the VCR. From now on, whenever RF-CH you want to play a tape, set the TV to the video channel. To check to see if the TV tuning is correct Set the TV to the video channel and press PROGRAM +/– on the VCR. If the TV screen changes to a different programme each time you press PROGRAM +/–, the TV tuning is correct.

  • Page 15: Step 5: Setting Up The Vcr With Easy Set Up

    Step 5 Setting up the VCR with EASY SET UP EXECUTE Before using the VCR for the first time, set up the VCR using the EASY SET UP CURSOR function. With this function, you can set > /. /? // the language for the on-screen display, TV channels, guide channels for G-CODE, and the VCR clock, guided by...
  • Page 16 For SLV-T2000AS On-screen On-screen Corresponding Corresponding channel number channel number TV channel TV channel AS65 AS66 AS67 AS68 AS69 S1 - S41 S1 - S41 AS5A S42 - S46 S01 - S05 For SLV-T2000MN AS9A On-screen Corresponding AS10 channel number TV channel AS11 AS12...
  • Page 17 Step 5 : Setting up the VCR with EASY SET UP (continued) When all the channels are preset, the following screen appears. Using CURSOR > /. /? // , set G-CODE guide channels and change the programme positions. (If not necessary, skip this step.) CURSOR The setting procedures are the same as those described in “Manual setup —...
  • Page 18 EXECUTE Press EXECUTE . A programme position appears on the TV screen. Note • Do not exit EASY SET UP while the VCR is presetting channels. If you do, repeat EASY SET UP from the beginning. Getting Started...

  • Page 19: Manual Setup

    Manual setup — Selecting a language MENU You can change the on-screen display EXECUTE language from the one you selected with CURSOR EASY SET UP. > /. /? // Before you start… • Turn on the VCR and the TV. •...
  • Page 20 Manual setup — Presetting channels MENU If some channels could not be preset EXECUTE using EASY SET UP, you can preset them manually. CURSOR > /. /? // Before you start… • Turn on the VCR and the TV. • Set the TV to the video channel. PROG+/–...
  • Page 21 Manual setup –– Presetting channels (continued) Selected programme Press PROG +/– to select the programme position position. PROG Press CURSOR / to start tuning. The VCR starts searching for a channel and CURSOR displays the first one it finds on the TV screen.
  • Page 22 Disabling unwanted programme positions After tuning the TV channels, you can disable unused programme positions. The disabled positions will be skipped later when you press the PROG +/– buttons. In step 4 on the previous page, press programme number button “0” twice to display the number “0”...
  • Page 23 Manual setup — Setting up G-CODE MENU G-CODE is a feature that simplifies programming the VCR to make timer EXECUTE recordings. To use G-CODE, each programme position needs to be CURSOR matched with its G-CODE guide > /. /? // channel.
  • Page 24 Press CURSOR > /. to move the cursor (I) to the row on which you want to set the CURSOR guide channel. To display other pages for programme positions 6 to 60, press CURSOR > /. repeatedly. Press CURSOR / twice to highlight the guide channel column.
  • Page 25 Manual setup — Setting up G-CODE (continued) Setting up G-CODE for satellite broadcasts When your satellite tuner is connected via the AERIAL IN connector, first you have to set the programme position for each satellite channel using the TUNER PRESET menu. Then set the guide channel number for each satellite channel using the SET UP CH AND G-CODE menu.
  • Page 26 Manual setup –– Changing programme MENU positions EXECUTE After setting the channels and G-CODE CURSOR guide channels, you can change the > /. /? // programme positions as you like. Before you start… • Turn on the VCR and the TV. •...
  • Page 27 Manual setup –– Changing programme positions (continued) Press CURSOR ? to confirm the setting. The two rows exchange the positions. To change the programme position of another station, repeat steps 2 to 4. EXECUTE Press EXECUTE. Getting Started...
  • Page 28 Manual setup — Setting the clock MENU You must set the time and date on the VCR to be able to use the timer EXECUTE recording features properly. You can set the clock manually. CURSOR Before you start… > /. /? // •...
  • Page 29 Manual setup — Setting the clock (continued) Set the year, hour and minutes in sequence, using CURSOR / to highlight CURSOR the item to be set, and CURSOR > /. to select the digits. EXECUTE Press EXECUTE to start the clock. •...

  • Page 30: Basic Operations

    Basic Operations Playing a tape 6 EJECT TAPE RETURN COUNTER RESET HI-SPEED P PAUSE Æ PLAY p STOP Video8 CLICK SHUTTLE ring Turn on your TV and set it to the video channel. Press either Video8 or VHS whichever you want to play back the tape.
  • Page 31 Playing a tape (continued) Additional tasks Press Stop play p STOP Pause play P PAUSE* Resume play after pause P PAUSE or Æ PLAY Search forward ) FF during playback Search backward 0 REW during playback Fast-forward the tape ) FF during stop Rewind the tape 0 REW during stop High-speed rewind...

  • Page 32: Recording Tv Programmes

    Recording TV programmes DISPLAY COUNTER/ REMAIN PROG +/– r REC TAPE SPEED SP/LP (VHS) Video8 TAPE SELECT (VHS deck only) Turn on your TV and set it to the video channel. To record from a decoder, turn it on. Press either Video8 or VHS for the deck you want to use. Insert a VHS tape with its safety tab in place or an 8 mm tape with the safety switch slid back so that the red portion does not show.
  • Page 33 Recording TV programmes (continued) Press TAPE SPEED to select the tape speed, SP or LP. (VHS deck TAPE SPEED SP/LP only) LP provides recording time twice as long as SP; however, SP (VHS) produces better picture and audio quality. When recording with 8mm tape, the VCR records in SP mode automatically.
  • Page 34 To watch another TV pr ogramme while r ecor ding Press TV/VIDEO on the remote commander (or TV/VTR on the VCR) to turn off the VTR indicator in the display window. Select another programme position on the TV. To save a r ecor ding 8 mm tapes Video tapes have a safety switch to protect against accidental...
  • Page 35 Recording TV programmes (continued) VHS tape Maximum recording / playback time Tape type 5 hrs. E-300 10 hrs. 4 hrs. E-240 8 hrs. 3 hrs. E-180 6 hrs. 2 hrs. E-120 4 hrs. 1hr. E-60 2hrs. If you use types other than those listed above, the remaining tape length may not be displayed correctly.

  • Page 36: Recording Tv Programmes Using G-Code

    Recording TV programmes using G-CODE G-CODE Just enter the programme’s G-CODE Programme number listed in the TV programme number guide. The date, times and programme buttons position of that programme are set automatically. You can preset up to eight programmes at a time. Befor e you star t…...
  • Page 37 Recording TV programmes using G-CODE (continued) Press the programme number buttons to enter the programme’s G-CODE number. If you make a mistake, press TIMER CLEAR and re-enter the correct number. Press TAPE SPEED to select SP or LP. TAPE SPEED (VHS tape) SP/LP When you record with an 8 mm tape, skip...
  • Page 38 To stop r ecor ding To stop the VCR while recording, press TIMER REC ON/OFF. To recor d satellite br oadcasts If you connect a satellite tuner and the VCR, you can record satellite programmes. Turn on the satellite tuner. On the satellite tuner, select the satellite programme for which you wish to make a timer setting.

  • Page 39: Setting The Timer Manually

    Setting the timer manually MENU If G-CODE is not available in your area, follow the instructions below to set the timer to record programmes. EXECUTE You can preset up to eight programmes CURSOR at a time. > /. /? // TIMER REC Befor e you star t…...
  • Page 40 Set the date, start and stop times, programme position, and tape speed CURSOR (VHS deck only) : 1 Press CURSOR / to highlight each item in turn. 2 Press CURSOR > /. to set each item. To correct a setting, press CURSOR ? to return to that setting and reset.
  • Page 41 Setting the timer manually (continued) Daily/weekly r ecor ding In step 3 on the previous page, press CURSOR . to select the recording pattern. Each time you press CURSOR . , the indication changes as shown below. the current date n SUN-SAT n MON-SAT n MON-FRI n EVERY SAT ..n EVERY MON n EVERY SUN n 1 month later n (dates count down) n the current date Timer r ecor ding with VPS/PDC signals...

  • Page 42: Additional Operations

    Additional Operations Playing/searching at various speeds SKIP CLICK SHUTTLE ring Playback options Operation Fast-for ward/r ewind During stop, pr ess ) FF or 0 REW. View the pictur e during fast- During fast-for ward, hold ) FF down. During r ewind, hold for ward or rewind 0 REW down.
  • Page 43 Playing/searching at various speeds (continued) Using the CLICK SHUTTLE ring With the CLICK SHUTTLE ring, you can operate a variety of playback options. During playback or pause, turn the CLICK SHUTTLE ring clockwise or counter clockwise. Each change in the CLICK SHUTTLE ring position changes the playback mode, and the cor responding mark appears on the TV screen for a few seconds in the following way if the on-scr...

  • Page 44: Recording Tv Programmes Using The Quick Timer

    Recording TV programmes using the quick timer QUICK TIMER After star ting r ecor ding in the nor mal way, you can have the VCR stop recording automatically after a specified duration. While recor ding, pr ess QUICK TIMER once. Press QUICK TIMER r e peatedly to set the duration.

  • Page 45: Checking/Changing/Cancelling Timer Settings

    Checking/ changing/ cancelling timer settings MENU Befor e you star t... EXECUTE • Turn on your TV and set it to the CURSOR video channel. > /. /? // TIMER CLEAR Press either VHS or V ideo8 whichever you set the timer for Press TIMER REC ON/OFF to tur n of f the TIMER REC indicator.
  • Page 46 When the timer settings overlap The programme that star ts first has priority and the second pr ogramme star ts recor ding only after the first pr ogramme has finished. If the programmes star t at the same time, the pr ogramme listed first in the menu has priority .

  • Page 47: Recording Stereo And Bilingual Programmes

    Recording stereo and bilingual programmes In ZWEITON (German stereo) system (SLV-T2000MN only) This VCR automatically r eceives and r ecor ds ster eo and bilingual programmes based on the ZWEITON system. When a ster eo or bilingual programme is r eceived, the STEREO or MAIN/L indicator appears in the display window .
  • Page 48 Bilingual programme To listen to On-screen display Display window Main MAIN M A I N / L SUB/R Main and sub MAIN/SUB MAIN/L, SUB/R Standar d sound* No indicator No indicator * Usually the main sound (monaural) (VHS deck only) Selecting the sound during playback Press AUDIO MONITOR to select the sound you want.
  • Page 49 Recording stereo and bilingual programmes (continued) How sound is recorded on a video tape This VCR r ecor ds sound onto two dif fer ent tracks. High-fidelity sound (usually ster eo) is r ecor ded onto the main track (VHS tape) or the standar (AFM) track (8 mm tape) along with the pictur e.

  • Page 50: Searching Using The Index Function (Vhs Deck Only)

    Searching using the index function (VHS INDEX deck only) SEARCH (VHS) The VCR marks the tape with an index signal at the point wher e each r ecording begins. Use these signals as r efer ences to find a specific r ecor ding. The VCR can sear ch up to 99 index signals ahead of or behind the cur rent position.

  • Page 51: Adjusting The Picture (Vhs Deck Only)

    Adjusting the picture (VHS deck only) Adjusting the tracking Although the VCR automatically adjusts the tracking when playing a tape (the AUTO TRACKING indicator flashes in the display window , then lights steadily), distor tion may occur if the tape was r ecor ded in poor condition. If so, manually adjust the tracking.

  • Page 52: Changing Menu Options

    Changing menu options Press MENU, then select SET UP MENU. SLV-T2000MN Press CURSOR > / . to select the option to change, then pr ess CURSOR ? / / to change the setting. Press EXECUTE to retur n to the original screen.
  • Page 53 Changing menu options (continued) Menu option Set this option to VHS AUDIO MIX ON to listen to the hi-fi and normal audio tracks at the same time when selected the VHS deck. The AUDIO MONITOR button becomes inoperable. OFF to select the sound using the AUDIO MONITOR button when selected the VHS deck.

  • Page 54: Using The 8 Mm Deck And Vhs Deck At The Same Time

    Using the 8 mm deck and VHS deck at the same time Video8 Using one deck while the other is playing back a tape Press Video8 or VHS to select the deck that is not in use. Use the selected deck. Using one deck while the other is recording Press Video8 or VHS to select the deck that is not in the r ecor ding...

  • Page 55: Editing

    Editing One button dubbing Video8÷ One button dubbing is a way of editing the entire tape contents to another tape automatically from one deck to the other. Befor e you star t editing • Turn on your TV and set it to the video channel.

  • Page 56: Cut Editing

    Cut editing Video8 You can edit VCR recording from one deck to the other with cutting your unwanted event. Befor e you star t editing • Turn on your TV and set it to the EDIT ON(DIR) /OFF CLICK SHUTTLE SP/LP video channel.
  • Page 57 Cut editing (continued) Select the playback deck and turn the CLICK SHUTTLE ring on the VCR until the unwanted event ends. Press EDIT STANDBY/START again when a desired event appears on the screen. Editing starts. The indicator above the button lights. Repeat steps 6 to 8 to cut other unwanted events.

  • Page 58: Audio Dubbing (Vhs Deck Only)

    Audio dubbing (VHS deck only) This feature lets you record over the normal audio track. The monaural sound previously recorded is replaced while the original hi-fi sound remains unchanged. Use this feature to add commentary to a tape that you have recorded with a camcorder.
  • Page 59 Audio dubbing (VHS deck only) (continued) To start editing, press the P PAUSE buttons on this VCR and the stereo system (or other VCR) at the same time. When the counter reaches “0H00M00S,” audio dubbing stops automatically. To stop while editing Press the p STOP buttons on this VCR and the stereo system (or other VCR).

  • Page 60: Editing With Another Vcr

    Editing with another VCR How to hook up to record on this unit This unit (Recorder) LINE-2 IN S VIDEO Other VCR (Player) LINE OUT S VIDEO OUT Audio/video cable (supplied) S-video cable (supplied) : Signal flow How to hook up to record on another VCR This unit (Player) S VIDEO LINE OUT...
  • Page 61 Editing with another VCR (continued) Tips • Make sure you connect the plugs to jacks of the same colour. • If the other VCR is a monaural type, leave the red plug unconnected. • When connection is made using the EURO-AV connector, if the other VCR doesn’t have a EURO-AV (Scart) connector, use the VMC-2106 EURO-AV connecting cable.
  • Page 62 To stop editing Press the p STOP buttons on both VCRs. Tips • To make your editing more precise, release the VCRs from pause by pressing P PAUSE buttons on the VCRs, not on the remote comander. • To cut out unwanted events while editing, press P PAUSE on this VCR when an unwanted event begins.

  • Page 63: Additional Information

    Additional Information Troubleshooting If you have any questions or pr oblems not cover ed below , please consult your near est Sony service facility . Symptom Remedy The ON/ST ANDBY switch • Connect the mains lead secur ely. does not function.
  • Page 64 Symptom Remedy The pictur e has no sound. • The tape is defective. Use a new tape. The sound is unstable or has an • When you play a tape with the same sound r ecorded echo. on both the hi-fi and nor mal sound tracks, make sur e the VHS AUDIO MIX option in the SET UP MENU is set to OFF.
  • Page 65 Troubleshooting (continued) Symptom Remedy A tape cannot be inserted. • Check that a tape isn’ t alr eady in the tape compartment. The remote commander does • Make sur e you ar e pointing the r emote commander at not function. the r emote sensor on the VCR.

  • Page 66: High Eight) Video System

    (high eight) video system Both H and standar d h cassette tapes can be used with this VCR. Refer to the charts below for the compatibility between the video system and the standar d h system. When playing a tape/r ecor ding on a tape This VCR automatically detects the type of tape, either or standar d h .

  • Page 67: Specifications

    Specifications System General Channel coverage Power requirements SLV-T2000MN: 220 – 240 V AC, 50 Hz VHF R1 to R12, E2 to E12, NZ1 to NZ9 Power consumption UHF E21 to E69, R21 to R69 37 W CATV S01 to S05, S1 to S41 Operating temperature SLV-T2000AS: 5°C to 40°C...

  • Page 68: Index To Parts And Controls

    Index to parts and controls Refer to the pages indicated in par entheses ( ) for details. Front panel !¢ !£ !“ !` 0 CLICK SHUTTLE ring (42) ON/ST ANDBY switch/indicator (12) Æ PLA Y button (29) 8 mm 6 EJECT button (30) !…...
  • Page 69 Index to parts and controls (continued) Front panel, with cover opened !ƒ !⁄ ! !¢ !£ !“ !` 0 9 8 7 Video8 button (29) !… QUICK TIMER button (43) TV/VTR button (33) !` TAPE SPEED SP /LP (VHS) button (32) AUDIO DUB (VHS) button (57) !“...
  • Page 70 Rear panel AERIAL OUT connector (9) AC IN connector (9) LINE-1 (TV) connector (10) LINE OUT AUDIO / VIDEO jacks (10) DECODER connector LINE OUT S VIDEO connector (11) AERIAL IN connector (9) continued Additional Information...
  • Page 71 Index to parts and control (continued) Display window !` !“ !£ 7 8 9 SP LP video8 MAIN/L STEREO OPC SP LP REMAIN VPS PDC SUB/R NICAM !¥ !ƒ !⁄ !¢ 8 mm tape indicator !… STEREO indicator (46) 8 mm tape speed indicator !` OPC indicator (50) VTR indicator !“...
  • Page 72 Remote commander 6 EJECT button (30) TV / VIDEO r e mote contr ol switch (5) ; V TV T eletext buttons (6) COUNTER RESET button (30) TAPE RETURN button (30) Programme number buttons (6, 35) -/-- (ten’s digit) button (34) SET button (36) - HI-SPEED REW (V ideo8) button (30)
  • Page 73 Index to parts and control (continued) !∞ COMMAND MODE switch (7) !⁄ u (on/standby) switch (6) !⁄ !ƒ !ƒ AUDIO MONITOR button (6, 47) !¥ !¥ DISPLA Y button (6) !» @… !» WIDE button ( for TV) (8) @“ @…...
  • Page 74 Remote commander (In the lid) Menu buttons (6, 51) MENU button CURSOR > / . / ? / / buttons EXECUTE button $ /4 TRACKING AUTO/MANU (VHS) buttons (VHS deck only) (50) FASTEXT buttons (6) INDEX SEARCH buttons (49) COUNTER RESET button (30) !“...
  • Page 75 Additional Information...
  • Page 76 Additional Information...

Table of Contents