Page 1 R700/R701 User Guide...
Page 2: Table Of Contents
Chapter 1. Getting Started Product Features Before You Start Contents Safety Precautions USA ONLY Proper Posture During Computer Use Important Safety Information Replacement Parts and Accessories Regulatory Compliance Statements WEEE SYMBOL INFORMATION Overview Front View Status Indicators Right View Left View Back View Bottom View Turning the Computer On and Off Turning the computer on Turning the computer off...
Page 3: Product Features
Product Features High Performance Notebook Computer ■ Intel Core™2 Duo Processor, Intel Celeron. DDR II Memory ■ Wireless LAN , Bluetooth Easy-to-Use AV ■ Play AVStation is provided to easily play various multimedia files. ■ Camera Module Installed Sophisticated Design for Increased Usability ■ Various shortcut keys on the keyboard ■ Multi card slot ■ Luxurious design with increased usability The items marked with this symbol are optional items that are supported depending on the computer model. Note...
Page 4: Before You Start
 If a problem occurs, refer to the Q & A included in the User Guide. User Guide ■ Some devices and software referred to in the You are currently reading the User Guide. To open the User Guide may not be provided and/or changed file at any time, double-click the icon on the Desktop. by upgrade. Note Alternatively, select Start > All Programs > Samsung > Note that the computer environment referred in User Guide > User Guide. the User Guide may not be the same as your own environment. This document includes the computer functions, how to use the functions, and how to use the program. ■ Images used in this User Guide may differ from actual product. ■ This guide decribes procedures for using both the mouse and the touchpad. ■ The illustrations provided in this guide assume that your operating system is Windows Vista.
Page 5 Note support, a replacement or refund, and if our service engineer helpful information to use the function. visits you due to this problem, a service charge will be applied. This notation represents the page In addition, installing a program that does not support Windows Vista, may cause the program to not work properly. number you can refer to for information Page XX In this case, ask the corresponding software manufacturer about about related functions or as a the problem. If you request our services to resolve a problem reference. caused by incompatible software, a service charge will be Start > All This represents a menu path to run a applied. Programs > program. Samsung > User Click the Start button and then select All Guide > User Programs > Samsung > User Guide > Guide User Guide in this order from the menu.
Page 6 About the Product Capacity Representation Standard About HDD Capacity Representation The capacity of the storage device (HDD, SSD) of the manufacturer is calculated assuming that 1KB=1,000 Bytes. However, the operating system (Windows) calculates the storage device capacity assuming that 1KB=1,024 Bytes, and therefore the capacity representation of the HDD in Windows is smaller than the actual capacity due to the difference in capacity calculation. (E.g. For a 80GB HDD, Windows represents the capacity as 74.5GB, 80x1,000x1,000x1,000 byte/(1,024x1,024x1,024)byte = 74.505GB) In addition, the capacity representation in Windows may be even smaller because some programs such as Recovery Solution may reside in a hidden area of the HDD. About Memory Capacity Representation The memory capacity reported in Windows is lesser than the actual capacity of memory. This is because BIOS or a video adapter uses a portion of memory or claims it for further use. (E.g. For 1GB(=1,024MB) memory installed, Windows may report the capacity as 1,022MB or less) The actual capacity of storage device can be checked in the Main menu of the BIOS Setup, accessible by pressing F2 key during boot. For further instructions on how to enter the BIOS Setup, refer to "Settings and Upgrade" in the User Guide.
Page 7: Contents
Chapter 8. Appendix Turning the computer off Connecting with a Modem (Optional) Bluetooth (Optional) Using McAfee SecurityCenter Chapter 2. Using the Computer Bluetooth Function (Optional) Using Bluetooth Using Samsung Magic Doctor Keyboard (Optional) Touchpad Reinstalling Software Chapter 5. Using Applications CD Drive Q & A Inserting and Ejecting a CD...
Page 8: Safety Precautions
Safety Precautions For your security and to prevent damage, please read the following safety instructions carefully. Since this is commonly applied to Samsung Computers, some figures may differ from actual ones. Warning Failing to follow instructions marked with this symbol may cause personal injury and even fatality. Installation Related Do not install the product in Keep a distance of 15cm or more Avoid exposing any part of places exposed to humidity such between the computer and the your body to the heat from the as a bathrooms.
Page 9 Power Related The power plug and wall outlet figures may differ depending on the country specifications and the product model. Do not touch the mains plug or If the power cord or power outlet Plug the power cord firmly into power cord with wet hands.
Page 10 Battery Usage Related Do not bend the power cord If water or another substance excessively or do not place a enters the power input jack, heavy object over the power AC adapter or the computer, Keep the battery out of the cord.
Page 11 Usage Related Disconnect all cables connected Do not place any container filled If the computer is broken or to the computer before cleaning with water or chemicals over or dropped, disconnect the power it. If you are using a notebook near the computer.
Page 12 Upgrade Related Never disassemble the power Use only authorized parts (multi- Shut down the computer and supply or AC adapter. plug, battery and memory) and disconnect all cables before never disassemble parts. disassembling the computer. If There is a danger of electric shock. there is a modem, disconnect There is a danger of damaging the phone line.
Page 13 Custody and Movement Related Follow the instructions for the When carrying the notebook relevant location (e.g. airplane, computer with other items, hospital, etc.) when using a such as the adapter, mouse, wireless communication device books etc, take care not to press (wireless LAN, Bluetooth, etc.)..
Page 14 There is a danger of explosion or Do not place a heavy object Use only a battery authorized by fire. over the product. Samsung Electronics. This may cause a problem with Failing to do so may cause an the computer. In addition, the explosion. object may fall and cause injury, or damage the computer. Avoid contact with metal objects such as car keys or clips when...
Page 15 When handling computer parts, shock and fire. engineer after repairing the follow the instructions on the product. manual supplied with the parts. Close the LCD panel only Authorised Samsung Repair Failing to do so, may cause damage after checking if the notebook Centers will carry out safety checks to the product. computer is turned off. after a repair. Using a repaired product without testing it for safety...
Page 16 There is a danger of electric Check CDs for cracks and Failing to do so may cause electric shock if your body touches an damage prior to use. shock or fire. internal part. It may damage the disc and cause disorder of device and injury of Use parts authorized by user. Samsung Electronics only. Failing to do so, may cause fire or damage the product.
Page 17 To connect a device that is not driving. manufactured or authorized by For long periods of not using the Samsung Electronics, enquire notebook computer, discharge at your service center before the battery and preserve as it is connecting the device.
Page 18 Cautions on Preventing Data Loss (Hard Disk Management) Take care not to damage the Causes that may damage the data on a hard disk drive. data of a hard disk drive and the hard disk drive itself. ■ A hard disk drive is so sensitive to external impact that an ■ The data may be lost when an external impact may cause loss external impact is applied to...
Page 19: Usa Only
USA ONLY This Perchlorate warning applies only to primary CR (Maganese Dioxide) Lithium coin cells in the product sold or distributed ONLY in California USA. “Perchlorate Material- special handling may apply, See www.dtsc.ca.gov/hazardouswaste/perchlorate.” LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. For details see lamprecycle.org, eise.org, or call 1-800-Samsung.
Page 20: Proper Posture During Computer Use
Proper Posture During Computer Use Maintaining a proper posture during computer use is very important to prevent physical harm. The following instructions are about maintaining a proper posture during computer use developed through human engineering. Please read and follow them carefully when using the computer. Otherwise, the probability of (RSI: Repetitive Strain Injury) from repeated operations may increase and serious physical harm may be caused. The instructions in this manual have been prepared so that they can be applied within the coverage of general users. If the user is not included in the coverage, the recommendation is to be applied according to the user’s needs. Note Since this is commonly applied to Samsung Computers, some figures may differ from actual ones. Proper Posture ■ To use the computer while talking over the telephone, use a headset. Using the computer with the phone on your shoulder is bad for posture. Adjust the heights of desks and chairs appropriate to your height. ■ Keep frequently used items within a comfortable work The heights are to be adjusted so that your arm forms a range (where you can reach them with your hands). right angle when you place your hand over the keyboard while sitting down on a chair. Adjust the height of chair so that your heel is comfortably placed on the floor. ■ Do not use the computer while you are lying down, but only while you are sitting down.
Page 21 Eye Position Hand Position Keep the monitor or LCD away from your eyes by at Keep your arm at a right angle as shown by the figure. least 50cm. ■ Keep the line from your elbow to your hand straight. ■ Adjust the height of the monitor and the LCD screen so that its top height is equal to or lower than your eyes. ■ Do not place your palm over the keyboard while typing. ■ Avoid setting the monitor and LCD excessively bright. ■ Do not hold the mouse with excessive force. ■ Keep the monitor and LCD screen clean.
Page 22 Volume Control Illumination (Headphones and Speakers) ■ Do not use the computer in dark locations. The Check your volume first to listen to music. illumination level for computer use must be as bright so for reading a book. ■ Indirect illumination is recommended. Use a curtain to prevent reflection on the LCD screen. Operation Condition Check your volume!! ■ Do not use the computer in hot and humid locations. ■ Use the computer within the allowed temperature and ■ Check if the volume is too loud before using humidity range specified in the User Guide. headphones. ■ It is not recommended using headphones for long periods of time. Use Time (Break Time) ■ Take a break for 10 minutes or more after a 50-minute period when working for more than one hour.
Page 23: Important Safety Information
Important Safety Information Safety instructions Your system is designed and tested to meet the latest ■ Openings in the computer case are provided for standards for safety of information technology equipment. ventilation. Do not block or cover these openings. However, to ensure safe use of this product, it is important Make sure you provide adequate space, at least 6 that the safety instructions marked on the product and in inches (15 cm), around the system for ventilation when the documentation are followed. you set up your work area. Never insert objects of any kind into the computer ventilation openings. Always follow these instructions to help guard ■ Ensure that the fan vents on the bottom of the casing against personal injury and damage to your system. Caution are clear at all times. Do not place the computer on a soft surface, doing so will block the bottom vents. ■ If you use an extension cord with this system, make Setting Up your System sure that the total power rating on the products plugged into the extension cord does not exceed the extension cord power rating. ■ Read and follow all instructions marked on the product and in the documentation before you operate your system. Retain all safety and operating instructions for...
Page 24 Care During Use The Instruction On Safety Operation of computer ■ Do not walk on the power cord or allow anything to rest When installing and operating devices please refer to on it. safety requirements in the user guide. ■ Do not spill anything on the system. The best way to avoid spills is to not eat or drink near your system. ■ Some products have a replaceable CMOS battery on Devices can be used only with the equipment the system board. There is a danger of explosion if specified in the technical specifications of the the CMOS battery is replaced incorrectly. Replace the devices. battery with the same or equivalent type recommended by the manufacturer. Dispose of batteries according to the manufacturers If any smell of burning or smoke from the computer instructions. If the CMOS battery requires replacement insure that a qualified technician performs the task. the unit should be switched off and battery removed. The unit should be checked by a qualified technician ■ When the computer is turned off, a small amount of electrical current still flows through the computer. To before reuse. avoid electrical shock, always unplug all power cables, remove the battery and modem cables from the wall outlets before cleaning the system. Service and repair of devices should be carried out ■ Unplug the system from the wall outlet and refer by authorized service centers.
Page 25: Replacement Parts And Accessories
Replacement Parts and Accessories Use only replacement parts and accessories recommended by manufacturer. To reduce the risk of fire, use only No. 26 AWG or larger telecommunications line cord. Caution Do not use this product in areas classified as hazardous. Such areas include patient care areas of medical and dental facilities, oxygen rich environments, or industrial areas. Note Battery Disposal Laser Safety All systems equipped with CD or DVD drives comply with Do not put rechargeable batteries or products the appropriate safety standards, including IEC 60825-1. powered by non-removable rechargeable batteries The laser devices in these components are classified Caution in the garbage. as “Class 1 Laser Products” under a US Department of Health and Human Services (DHHS) Radiation Contact the Samsung Helpline for information on how to Performance Standard. Should the unit ever need dispose of batteries that you cannot use or recharge any servicing, contact an authorized service location. longer. Follow all local regulations when disposing of old batteries. Laser Safety Note: ■ Use of controls or adjustments or performance THERE IS A RISK OF EXPLOSION IF BATTERY IS Caution of procedures other than those specified in REPLACED BY AN INCORRECT TYPE. this manual may result in hazardous radiation Caution DISPOSE OF USED BATTERIES ACCORDING TO exposure. To prevent exposure to laser beams, THE INSTRUCTIONS do not try to open the enclosure of a CD or DVD drive.
Page 26 General Requirements Connect and Disconnect the AC adapter The requirements listed below are applicable to all countries: The socket-outlet shall be installed near the equipment ■ The length of the power cord set must be at least 6.00 and shall be easily accessible. feet (1.8m) and a maximum of 9.75 feet (3.0m). Do not unplug the power cord out by pulling the cable ■ All power cord sets must be approved by an acceptable only. accredited agency responsible for evaluation in the country where the power cord set will be used. ■ The power cord set must have a minimum current capacity of 7 A and a nominal voltage rating of 125 or 250 volts AC, as required by each country’s power Power Cord Requirements...
Page 27: Regulatory Compliance Statements
Regulatory Compliance Statements Wireless Guidance Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4 GHz Band, may be present (embedded) in your notebook system. The following section is a general overview of considerations while operating a wireless device. Additional limitations, cautions, and concerns for specific countries are listed in the specific country sections (or country group sections). The wireless devices in your system are only qualified for use in the countries identified by the Radio Approval Marks on the system rating label. If the country you will be using the wireless device in, is not listed, please contact your local Radio Approval agency for requirements. Wireless devices are closely regulated and use may not be allowed. The RF field strength of the wireless device or devices that may be embedded in your notebook are well below all international RF exposure limits as known at this time. Because the wireless devices (which may be embedded into your notebook) emit less energy than is allowed in radio frequency safety standards and recommendations, manufacturer believes these devices are safe for use. Regardless of the power levels, care should be taken to minimize human contact during normal operation. As a general guideline, a separation of 20 cm (8 inches) between the wireless device and the body, for use of a wireless device near the body (this does not include extremities) is typical. This device should be used more than 20 cm (8 inches) from the body when wireless devices are on and transmitting. (This Statement is not applicable to UMPC(Ultra Mobile PC) such as PDA, Portable PC.) This transmitter must not be collocated or operate in conjunction with any other antenna or transmitter except the installed Bluetooth transmitter. Some circumstances require restrictions on wireless devices. Examples of common restrictions are listed below:...
Page 28 Radio frequency wireless communication can interfere with equipment on commercial aircraft. Current aviation regulations ■ require wireless devices to be turned off while traveling in an airplane. 802.11B (also known as wireless Ethernet or Wifi) and Bluetooth communication devices are examples of devices that Caution provide wireless communication. In environments where the risk of interference to other devices or services is harmful or perceived as harmful, the option to ■ use a wireless device may be restricted or eliminated. Airports, Hospitals, and Oxygen or flammable gas laden atmospheres are limited examples where use of wireless devices may be restricted or eliminated. When in environments where you are uncertain of the sanction to use wireless devices, ask the applicable authority for authorization prior to use or turning on the wireless device. Every country has different restrictions on the use of wireless devices. Since your system is equipped with a wireless ■ device, when traveling between countries with your system, check with the local Radio Approval authorities prior to any move or trip for any restrictions on the use of a wireless device in the destination country. If your system came equipped with an internal embedded wireless device, do not operate the wireless device unless all ■ covers and shields are in place and the system is fully assembled. Wireless devices are not user serviceable. Do not modify them in any way. Modification to a wireless device will void the ■ authorization to use it. Please contact manufacturer for service. Only use drivers approved for the country in which the device will be used. See the manufacturer System Restoration Kit, or ■ contact manufacturer Technical Support for additional information.
Page 29 United States of America USA and Canada Safety Requirements Other Wireless Devices and Notices Safety Notices for Other Devices in the Wireless Network: Refer to the documentation supplied with Do not touch or move antenna while the unit is transmitting wireless Ethernet adapters or other devices in the wireless network. or receiving. Do not hold any component containing the radio such that The Part 15 radio device operates on a non- the antenna is very close or touching any exposed parts interference basis with other devices operating at of the body, especially the face or eyes, while transmitting. this frequency. Any changes or modification to said Caution product not expressly approved by Intel could void Do not operate the radio or attempt to transmit data the user’s authority to operate this device. unless the antenna is connected; if not, the radio may be damaged. Unintentional Emitter per FCC Part 15 Use in specific environments: The use of wireless devices in hazardous locations is This device complies with Part 15 of the FCC Rules.
Page 30 Intentional emitter per FCC Part 15 This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits Low power, Radio LAN type devices (radio frequency (RF) Caution are designed to provide reasonable protection wireless communication devices), operating in the 2.4 against harmful interference in a residential GHz Band, may be present (embedded) in your notebook installation. This equipment generate uses and can system. This section is only applicable if these devices are radiate radio frequency energy and if not installed present. Refer to the system label to verify the presence and used in accordance with the instructions may cause harmful interference will not occur in a of wireless devices. particular installation. If this equipment does cause Wireless devices that may be in your system are only harmful interference to radio or television reception, qualified for use in the United States of America if an FCC which can be determined by turning the equipment off and on, the user is encouraged to try to correct ID number is on the system label. the interference by one or more of the following The FCC has set a general guideline of 20 cm (8 inches) measures: separation between the device and the body, for use of Reorient or relocate the receiving antenna. ■ a wireless device near the body (this does not include Increase the separation between the equipment ■ extremities). This device should be used more than 20 and receiver. cm (8 inches) from the body when wireless devices are Connect the equipment into an outlet on a ■...
Page 31 The REN is used to determine the quantity of devices Wireless devices are not user serviceable. Do not which may be connected to telephone line. Excessive modify them in any way. RENs on the telephone line may result in the devices Caution Modification to a wireless device will void the not ringing in response to an incoming call. In most, but authorization to use it. Contact manufacturer for not all areas, the sum of RENs should not exceed five service. (5.0). To be certain of the number of devices that may be connected to a line, as determined by total RENs, contact FCC Statement for Wireless LAN use: the local telephone company to determine the maximum “While installing and operating this transmitter and REN for the calling area. Caution antenna combination the radio frequency exposure limit of 1mW/cm2 may be exceeded at distances If the terminal equipment causes harm to the telephone close to the antenna installed. Therefore, the user network, the Telephone Company will notify you in must maintain a minimum distance of 0cm from advance that temporary discontinuance of service may the antenna at all times. be required. But if advance notice is not practical, the This device can not be colocated with another transmitter and transmitting antenna.” (This telephone company will notify the customer as soon as Statement is not applicable to UMPC(Ultra Mobile possible. Also, you will be advised of your right to file a PC) such as PDA, Portable PC.) complaint with the FCC if you believe it is necessary. The telephone company may make changes in its facilities, equipment, operations, or procedures that could FCC Part 68 affect the operation of the equipment. If this happens,...
Page 32 Canada Unintentional Emitter per ICES-003 This equipment cannot be used on public coin phone service provided by the telephone company. Connection to party line service is subject to state tariffs. This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out The Telephone Consumer Protection Act of 1991 makes in the radio interference regulations of Industry Canada. it unlawful for any person to use a computer or other electronic device, including fax machines, to send any Le présent appareil numérique n’émet pas de bruits message unless such message clearly contains in a radioélectriques dépassant les limitesapplicables aux margin at the top or bottom of each transmitted page or on appareils numériques de Classe B prescrites dans le the first page of the transmission, the date and time it is règlement sur le brouillage radioélectrique édicté par sent and an identification of the business or other entity, or Industrie Canada. other individual sending the message and the telephone number of the sending machine or such business, other entity, or individual. (The telephone number provided may Intentional Emitter per RSS 210 not be any number for which charges exceed local or long-distance transmission charges.) Low power, Radio LAN type devices (radio frequency (RF) In order to program this information into your fax machine, wireless communication devices), operating in the 2.4 refer to your communications software user manual. GHz Band, may be present (embedded) in your notebook system. This section is only applicable if these devices are present. Refer to the system label to verify the presence of wireless devices.
Page 33 This transmitter must not be collocated or operate in with a single-line individual service may be extended by conjunction with any other antenna or transmitter except means of a certified connector assembly. The customer the installed Bluetooth transmitter. should be aware that compliance with the above conditions may not prevent degradation of service in some Operation of this device is subject to the following two situations. conditions: (1) This device may not cause harmful interference, and (2) this device must accept any Repairs to certified equipment should be made by an interference received, including interference that may authorized Canadian maintenance facility designated by cause undesired operation of the device. the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the To prevent radio interference to licensed service, telecommunications company cause to request the user this device is intended to be operated indoors and to disconnect the equipment. away from windows to provide maximum shielding. Caution Equipment (or its transmit antenna) that is installed Users should make sure, for their own protection, that outdoors is subject to licensing. the electrical ground connections of the power utility, telephone lines, and internal metallic water pipe system, if Wireless devices are not user serviceable. Do not present, are connected together. This precaution may be modify them in any way. Modification to a wireless particularly important in rural areas. device will void the authorization to use it. Contact Caution manufacturer for service. To avoid electrical shock or equipment malfunction do not attempt to make electrical ground connections by yourself. Contact the appropriate Caution inspection authority or an electrician, as appropriate. Telecommunications per DOC notice (for products fitted with an IC-compliant The Ringer Equivalence Number (REN) assigned to...
Page 34 European Union European Union CE Marking and European Radio Approval Information (for Compliance Notices products fitted with EU-approved radio devices) Products intended for sale within the European Union are marked with the Conformité Européene (CE) Marking, This Product is a Notebook computer; low power, which indicates compliance with the applicable Directives Radio LAN type devices (radio frequency (RF) wireless and European standards and amendments identified communication devices), operating in the 2.4 GHz band, below. This equipment also carries the Class 2 identifier. may be present (embedded) in your notebook system The following information is only applicable to systems which is intended for home or office use. This section is labeled with the CE mark only applicable if these devices are present. Refer to the system label to verify the presence of wireless devices. Wireless devices that may be in your system are only European Directives qualified for use in the European Union or associated areas if a CE mark with a Notified Body Registration This Information Technology Equipment has been Number and the Alert Symbol is on the system label.
Page 35 Translated Statements of Compliance [Spanish] Este producto cumple con las normas del Directivo Eu- [English] ropeo 1999/5/EC. This product follows the provisions of the European Direc- [Swedish] tive 1999/5/EC. Denna produkt har tillverkats i enlighet med EG-direktiv [Danish] 1999/5/EC. Dette produkt er i overensstemmelse med det europæiske European Economic Area Restrictions direktiv 1999/5/EC [Dutch] Local Restriction of 802.11b/802.11g Radio Usage Dit product is in navolging van de bepalingen van Europ- [Note to integrator: The following statements on ees Directief 1999/5/EC. local restrictions must be published in all end-user [Finnish] documentation provided with the system or product Tämä tuote noudattaa EU-direktiivin 1999/5/EC määräyk- incorporating the Intel PRO/Wireless 2200BG Network siä. Connection product.] [French] Ce produit est conforme aux exigences de la Directive Due to the fact that the frequencies used by Européenne 1999/5/EC.
Page 36 European Telecommunication Information General (for products fitted with EU-approved European standards dictate maximum radiated trans- modems) mit power of 100 mW effective isotropic radiated power (EIRP) and the frequency range 2400 – 2483.5 MHz. Marking by the symbol indicates compliance of this Belgium equipment to the Radio and Telecom Terminal Equipment The product may be used outdoors, but for outdoor trans- Directive 1999/5/EC. Such marking is indicative that missions over a distance of 300m or more, a license from this equipment meets or exceeds the following technical the BIPT is required. standards: This restriction should be indicated in the manual as fol- CTR 21 - Attachment requirements for pan-European lows: approval for connection to the analogue Public Switched Telephone Networks (PSTNs) of TE (excluding TE Dans le cas d’une utilisation privée, à l’extérieur d’un supporting voice telephony services) in which network bâtiment, au-dessus d’un espace public, aucun enregis- addressing, if provided, is by means of Dual Tone Multi- trement n’est nécessaire pour une distance de moins de Frequency (DTMF) signaling. 300m. Pour une distance supérieure à 300m un enregis- trement auprès de l’IBPT est requise. Pour une utilisation Although this equipment can use either loop publique à l’extérieur de bâtiments, une licence de l’IBPT disconnect (pulse) or DTMF (tone) signaling, only est requise. Pour les enregistrements et licences, veuillez the performance of the DTMF signaling is subject to Caution contacter l’IBPT.
Page 37: Weee Symbol Information
WEEE SYMBOL INFORMATION Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.
Page 38: Overview
Overview Before You Start! ■ The items marked with this symbol are optional items which may be changed or may not be provided depending on the computer model. ■ The actual color and appearance of the computer may differ from the pictures used in this guide. Front View C amera Lens Using this lens, you can take still pictures and record video. LCD The screen images are displayed here. Power Button Turns the computer on and off. p. 43 Keyboard A device to enter data by pressing the keys. p. 45 Microphone LCD Latch Status Indicators This latch is used to open and close the LCD panel. Shows the operating status of To open the LCD panel, slide the latch to the right the computer. The corresponding and then lift the LCD panel up. operating LED is lit when the corresponding function operates. Touchpad/Touchpad Buttons p. 38 The touchpad and touchpad buttons provide functions similar to the mouse ball and buttons. p. 48...
Page 39: Status Indicators 8
Status Indicators Num Lock This turns on when the Num Lock key is pressed and numeric keypad is activated. Caps Lock This turns on when the Caps Lock key is pressed allowing capital letters to be typed without holding the Shift button down. Power This shows the computer operating status. On : When the computer is operating Blinks: When the computer is in Sleep mode. Charge Status This shows the power source and the battery charge status. Green: When the battery is fully charged or the battery is not installed. Red: When the battery is being charged. Off: When the computer is running on battery power without being connected to AC adapter. Wireless LAN This turns on when the wireless LAN is operating. HDD This turns on when the hard disk is being accessed. Scroll Lock This turns on when the Scroll Lock key is pressed and screen scroll is locked. p. 46...
Page 40: Right View 9
Right View USB Port You can connect USB devices to the USB port such as a keyboard/mouse, digital camera, etc. CD Drive (ODD) Plays CD or DVD titles. Since an ODD drive is optional, the installed drive depends on the computer model. p. 51 Serial Port You can connect a serial device to the serial port. To use the serial port, open up the rubber cap on the port.
Page 41: Left View 0
Left View Digital Video/Audio Port (HDMI) You can connect an HDMI cable to this port. Using this port, you can enjoy digital video and audio on the TV. USB Port You can connect USB devices to the USB port such as a keyboard/mouse, digital camera, etc. Microphone Jack A jack used to connect the microphone. PCI ExpressCard Slot Install the PCI Express card into Fan Vents this slot. The internal heat of the computer is emitted through these holes. If the vents are blocked the computer may overheat. Multi Card Slot Avoid blocking the vents as this may be dangerous. A card slot that supports Memory Stick, Caution Memory Stick Pro, SD Card, SDHC, MMC, MMC Plus and xD cards. p. 57 Headphone Jack A jack used to connect the headphones.
Page 42: Back View 1
Back View Security Lock Port You can connect a Kensington lock to the Security Lock Port to prevent the computer from being stolen. Battery Wired LAN Port This is a Lithium-Ion rechargeable battery that Connect the Ethernet cable to this port. supplies power to the computer. p. 142 p. 94 USB Port You can connect USB devices to the USB port such as a keyboard/mouse, digital camera, etc. Modem Port A port to which a telephone cable is connected to in order to dial up to the Internet. Monitor Port A port used to connect a monitor, TV or projector supporting a 15pin D-SUB interface. p. 61 DC Jack A jack to connect the AC adapter that supplies power to the computer.
Page 43: Bottom View
Bottom View Battery Latches The latch used to remove or install the battery. p. 142 Hard Disk Drive Speaker Memory Compartment Cover Compartment Cover A device used to generate The main memory is installed sound. inside the cover. p. 140 The hard disk drive is installed inside the cover.
Page 44: Turning The Computer On And Off
Turning the Computer On and Off Turning the computer on Turning the computer off Install the battery and connect the AC adapter. Click the Start ( ) button on the taskbar. (Refer to the Installation Guide.). Slide the LCD Latch to the right and then lift up Click the ( ) and click on Shut down. the LCD panel. The computer will shut down. Press the Power button to turn the computer on. Power Power button LED is lit while the computer is turned Button Before Using the Power Button Since the Power Icon is set to power saving mode, selecting Start >...
Page 45: Chapter 2. Using The Computer
Chapter 2. Using the computer Keyboard Touchpad CD Drive Inserting and Ejecting a CD Burning a CD HD DVD (Optional) Blu-ray (Optional) Multi Card Slot PCI ExpressCard Slot Connecting a monitor / TV Connecting a Monitor Connecting a TV Viewing Through a Monitor / TV Using Dual View Adjusting the Volume...
Page 46: Keyboard
Keyboard The keyboard is supplied according to the corresponding country. Refer to the keyboard figure for the corresponding country. United Kingdom United States...
Page 47 REST Switches to Sleep mode. To wake the computer up, press the Power button. (Sleep Mode) Shows the remaining battery charge. Gauge You can only use this function when the Easy Display Manager program is installed. Enters the Euro monetary unit symbol. Euro This key may not be provided depending on the keyboard type. Switches the screen output to the LCD or external monitor when an external monitor (or TV) is CRT/LCD connected to the computer. Backlit Turns the LCD backlight on or off. Mute Mutes or cancels mute. Samsung Magic System diagnosis, recovery and Internet consultation program, Samsung Magic Doctor, will be Doctor launched. You can select operation mode when you need maximum system performance or low-noise/low power consumption with one-click. ■ Silent: Low-noise and low power consumption mode Easy SpeedUp ■ Normal: Normal Mode Manager ■ Speed: Maximum performance mode. The system operates in its maximum performance, and system resources are allocated to the currently active program with priority for maximum performance. Wireless LAN Turns the wireless LAN function on or off in models with wireless LAN capability. Turns the Touchpad function on or off. Touchpad When using an external mouse only, you can turn the Touchpad off.
Page 48 Screen Brightness Control Other Function Keys To adjust the LCD brightness press the Fn + ( ) key combination or the Fn + ( ) key combination. The ■ Application Key ( changed screen brightness is displayed at the center of Performs the right-click mouse function (touchpad). the screen for a moment. Volume Control To control the volume, press the Fn + ( ) key combination or the Fn + ( ) key combination. You can mute the sound or cancel the mute function by clicking the Fn + ( ) key combination.
Page 49: Touchpad
Touchpad The touchpad provides the same function as a mouse and the left and right buttons of the touchpad plays the role of the left and right buttons of a mouse. Before You Start! Use the Touchpad with your fingers. Using a sharp object may damage the Touchpad. ■ If you touch the Touchpad or press the Touchpad buttons while booting up, the Windows boot time may be extended. ■ Touchpad Scroll Area Use to move the cursor. Plays the role of the mouse wheel. You can scroll up and down using the Scroll Area. Touchpad Left Button Touchpad Right Button You can select or run a program Plays the role of the right mouse using this button. button.
Page 50 Moving the cursor on the screen Double-Click Function Place your finger on the touchpad slightly and move your Put your finger on the touchpad and quickly tap twice with finger. The mouse cursor will move accordingly. Move your finger on an item you want. your finger in the direction you wish to move the cursor. Alternatively, press the left touchpad button twice quickly. TapTap ClickClick Click Function Right Button Function Place your finger on the touchpad and tap your finger This corresponds to clicking the right mouse button. once over an item you want. Press the right touchpad button once. The corresponding Alternatively, press the left touchpad button once. pop-up menu appears. Click Click...
Page 51 Drag Function Touchpad On/Off Function If you want to use the mouse only without using the Dragging refers to moving an item to another place after touchpad, you can turn the touchpad off. selecting it. To lock the touchpad function, press the Fn + ( ) keys. Press and hold down the left touchpad button over an item you want to drag and move the item to the new location. You can set the touchpad and touchpad button settings in the tabs that appear when clicking Start > Control Panel > Hardware and Sound > Mouse. Move Note Holding down the left touchpad button Touchpad Scroll Function The touchpad scroll area provides the mouse wheel function (scroll function). Place your finger on the touchpad’s right edge for vertical scrolling or the bottom edge for horizontal scrolling and then move your finger along the edge to scroll the screen vertically or horizontally.
Page 52: Cd Drive
CD Drive An optical disk drive is optional and may differ depending on your computer model. For detailed specifications, refer to the catalogue. Before You Start! One of the following optical disk drives is installed on this computer. Drive Type Function DVD-ROM Reads CD/DVD. RW-Combo You can read CDs and DVDs, and burn a CD. You can read CDs and DVDs, and burn CDs and DVDs. DVD Super Multi Supported DVD recording types include DVD±R, DVD±RW, DVD-RAM. You can read HD DVD-ROM, HD DVD-R and HD DVD-RW disks and burn data to HD DVD-R and HD-DVD (Optional) HD DVD-RW disks. Blu-Ray (Optional) You can read BD-ROM, BD-R and BD-RE disks and burn data to BD-R and BD-RE disks. Do not insert a cracked or scratched CD. ■ Otherwise, the CD may break and damage the optical disk drive when the CD rotates at a high speed. When you clean a CD or DVD title, wipe with a soft cloth from inside to outside. ■ Caution Do not eject a CD when the CD operating LED is on. ■ HD-DVD and Blu-Ray drives are provided for some models only. ■ Inserting and Ejecting a CD Click the Eject button of the optical disk drive at the side of the computer. Emergency Status Indicator Hole Eject Button...
Page 53: Burning A Cd
When the CD tray pops out, insert a CD or DVD until Burning a CD it clicks. If your computer has a writable CD drive, you can write data onto a CD or DVD or burn an audio CD. CyberLink DVD Suite is supplied with the System Software Media (or an additional CD) so that you can burn a CD using the program. Install the provided software and use the software functions referring to the software help. Push the CD tray inward until it clicks. The CD drive status indicator is turned on. A CD drive’s reading and writing speed may ■ differ depending on the condition and type of the media. Note To eject a CD when the CD drive does not work ■ or the computer is off, place the end of a paper clip ( ) into the Emergency Hole until the CD tray is ejected.
Page 54: Hd Dvd (Optional)
HD DVD (Optional) HD-DVD is a next generation storage media than can save more data than the existing DVD format. You can record and play better quality HD movies than the existing SD-grade DVD format. Type HD DVD Logo Storage Capacity 15 GB / 30 GB 4.7 GB / 8.5 GB 0.65 GB Data Rate 36.55 Mbps 11.08 Mbps 7.8 Mbps Supported Resolution 1920 X 1080(i) 720 X 480 320 X 240 * Date Rate: The amount of data that can be read or written onto a storage media per second. Supported Disk Types HD DVD supports the following disk types. Type Function HD DVD-ROM Reads HD DVD disks. HD DVD-R Reads HD DVD disks and writes data onto HD DVD disks once. HD DVD-RW Reads and writes to rewritable HD-DVD media.
Page 55 About HD DVD You can save functions for Favorites frequently used menus. The CyberLink HD DVD Solution program is provided so that users with HD-DVD Drives can conveniently and You can play DVD/HD DVD video easily record multimedia files and other data onto HD DVD Movie Player files. disks. You can format or write data onto Data CD/DVD disks. For a more detailed description of the functions, refer to You can burn an audio CD or a the help section of the corresponding program. Music data CD/DVD with MP3 and WMA files, and you can rip an audio CD. Select Start > All Programs > CyberLink HD You can burn a VCD, SVCD and DVD Solution > CyberLink HD DVD Solution. DVD title, edit videos and photos, Video&Photo Alternatively, double-click the CyberLink HD DVD create a Slide Show, and burn a DVD folder. Solution ( ) icon on the Desktop.
Page 56: Blu-Ray (Optional)
Blu-ray (Optional) Blu-Ray is a next generation storage media that can save approximately 5 to 10 times more data than the existing DVD format. You can record and play better quality HD movies than the existing SD-grade DVD format. Type Blu-Ray Logo Storage Capacity 25 GB / 50 GB 4.7 GB / 8.5 GB 0.65 GB Data Rate 36 Mbps 11.08 Mbps 7.8 Mbps Supported Resolution 1920 X 1080(i) 720 X 480 320 X 240 * Date Rate: The amount of data that can be read or written onto a storage media per second. Supported Disk Types Blu-Ray supports the following disk types. Type Function BD-ROM Reads Blu-Ray disks. BD-R Reads Blu-Ray disks and writes data onto Blu-Ray disks once. BD-RE Reads and writes to rewritable Blu-Ray media. This only supports BD-R Ver 1.1 and BD-RE Ver 2.1 or later.
Page 57 About Blu-Ray You can save functions for Favorites frequently used menus. The CyberLink BD Solution (hereafter CBDS) program is provided so that users with Blu-Ray Drives can conveniently and easily record multimedia files and other Movie Player You can play DVD video files. data onto Blu-Ray disks. You can format or write data onto Data CD/DVD Blu-Ray disks. For a more detailed description of the functions, refer to You can burn an audio CD or a the help section of the corresponding program. Music data CD/DVD with MP3 and WMA files, and you can rip an audio CD. Select Start > All Programs > CyberLink BD You can burn a VCD, SVCD and Solution > CyberLink BD Solution. Alternatively, DVD title, edit videos and photos, Video&Photo double-click the CyberLink BD Solution ( ) icon create a Slide Show, and burn a on the Desktop. DVD folder. You can copy Blu-Ray DVD or CD Copy&Backup data.
Page 58: Multi Card Slot
Multi Card Slot Using the multi card slot, you can read and write data to a Memory Stick, Memory Stick Pro, SD card, SDHC card, MMC, MMC Plus and xD card. You can use a card as a removable disk and conveniently exchange data with digital devices such as a digital camera, digital camcorder, MP3, etc. Before You Start! A multi card slot is optional and is provided for some models only. ■ You have to additionally purchase a multi card with the necessary capacity depending on your requirements. ■ You can use a multi card just like any data storage device. A copyright protection function is not supported. ■ Since you can lose a card when moving the computer, keep the card separately. ■ Supported Cards Memory Stick Memory Stick Pro SD Card SDHC card MMC Plus xD Card...
Page 59 To Insert and Use a Memory Card You can save, move and delete data by double- clicking the corresponding drive. Insert a card into the slot according to the directions printed on the slot. Example) SD Card The card drive appears. Click Open folder and view The device name of the card drive may differ depending on your computer model. files. If the window does not appear, click Start > Note Computer. Since you can only use the card after formatting it, if it is not formatted, format the card referring to the descriptions of “Formatting a card”. Using a Memory Stick Duo, Mini SD and RS-MMC Since the above cards are too small, you cannot insert the cards into the slot directly. Note Insert the card into the dedicated adapter (available from most electronic retailers) and then insert the adapter into the multi card slot.
Page 60 To remove a memory card ■ T o use a card to exchange data with a digital device such as a digital camera, formatting the data using the digital device is recommended. Push the tip of the card lightly. Caution ■ W hen you try to use a card, which is formatted in the computer, in another digital device, you may have to format the card again in the device. ■ Y ou cannot format, write or delete data from a Memory Stick, Memory Stick Pro, SD, or SDHC If the card pops up with a clicking sound, remove the card with a write protection tab when it is in the card. Lock position. ■ I nserting and removing a memory card repeatedly may damage the memory card. To format a memory card You have to format a card first to use it. Formatting a card deletes all data saved on the card. If the card includes data, backup the data before formatting it. Caution Click Start > Computer. Right-click over a card drive with the touchpad and select Format.
Page 61: Pci Expresscard Slot
PCI ExpressCard Slot You can use PCI Express cards using this slot. The PCI ExpressCard slot can be regarded as the next generation PCMCIA card specification and supports LAN, TV Tuner and Sound cards. This computer’s slot supports the Express Card/34 and Express Card/54 specifications. Before You Start! Remove the dummy card installed to protect the slot first. Lightly push the dummy card of the slot. The dummy card pops up. ■ Eject the dummy card. This slot is a PCI ExpressCard slot. You cannot connect a PCMCIA card here. ■ To insert a card To remove a card Insert a card into the slot on the side of the Double-click the Safely Remove Hardware icon ( on the taskbar. computer. Select the card to be removed and click Stop. If the Stop a Hardware device window appears, click the OK button. PCI ExpressCard Slot Push the card in the slot lightly. Then the card pops up. If you insert a card into the slot, Windows recognizes the card automatically or a message telling you to install a driver appears. If the card is not Eject the card.
Page 62: Connecting A Monitor / Tv
Connecting a monitor / TV Using an external display device is useful when you are giving a presentation or watching a video or movie through your monitor. Before You Start! You have to buy a connection cable additionally. ■ A HDMI port is optional and provided for some models only. ■...
Page 63: Connecting A Tv
Connecting a TV Since the port to connect to a TV differs depending on the port type used to connect the TV, connect as follows. Connecting to the Monitor port Connect the monitor and computer using the PC Input (RGB) port on the TV with the monitor cable (15pin). Connecting to the HDMI port (Optional) Connect it to the HDMI port of the TV using an HDMI cable.
Page 64: Viewing Through A Monitor / Tv
Viewing Through a Monitor / TV You can switch the display device using the shortcut key. LCD: Notebook Screen CRT: External Monitor Screen Note Switching the Display Device using the HDMI : TV Screen or Monitor (when it is connected via the HDMI port). Shortcut Key LCD+CRT Clone : Notebook+ External Monitor Screen Press the Fn + ( ) key combination once. Then the LCD+CRT DualView: Notebook+ External Monitor Easy Display Manager screen appears in which you can Screen in Dual View select a display device. LCD+HDMI Clone: Notebook+ TV(or Monitor) Screen Whenever you press the ( ) key while holding down the LCD+HDMI DualView: Notebook+ TV(or Monitor)
Page 65: Using Dual View
Using Dual View Dual View enables users to expand their computer screen Click on the number 2 monitor icon and select over two display devices. Extend the desktop onto this monitor. Click Apply Dual View is convenient when a wide operating space is and then click the OK button. needed. In addition, since Dual View operates as if there are 2 graphic cards present even when there is only one, you can set the resolution and color for each display device. Selecting Dual View Check if the external display device is properly connected and follow the instructions below. Click the Start > Control Panel > Appearance and Personalization > Adjust screen resolution.
Page 66 Using Window in Dual View When notebook LCD is set as the main device, the 1 digit is displayed over it and the 2 digit is displayed Click on the window title bar of the main LCD (monitor over the auxiliary display device. Now you can number 1) and drag it into the auxiliary display device expand the Desktop screen over 2 display devices. (monitor number 2) to move the window. When using Dual View, it is recommended setting the LCD as the main device (number 1). Canceling Dual View If the resolution of the auxiliary display device is 640×480 pixels with 256 colors, click the Start > Click the Start > Control Panel > Appearance and Control Panel > Appearance and Personalization Personalization > Adjust screen resolution. > Adjust screen resolution > Monitor Number 2 and adjust the resolution and color quality.
Page 67: Adjusting The Volume
Adjusting the Volume You can adjust the volume using the keyboard and the volume control program. Adjusting the Volume using the Keyboard Using the Sound Recorder Press the Fn + ( ) key combination or Fn + ( ) key The procedures to record sound using the Windows combination to adjust the volume. Recorder are described below. Press the Fn + ( ) key combination to turn the volume on or off. Connect a microphone to the microphone jack. Adjusting the Volume using the Volume Adjustment Program Click the Volume icon ( ) on the taskbar and slide the Right-click over the Volume icon ( ) on the taskbar volume control bar to adjust the volume. and select Recording Device. Check if the microphone is set as the default recording device.
Page 68 Using EDS The EDS function enables you to experience more stereophonic sound using stereo speakers. Right-click over the Volume icon ( ) in the Taskbar and select Playback Devices (P). Select Speaker in the Play tab and click Properties. Select the Samsung EDS tab in the Speaker Properties window. Unselect the Disable Samsung EDS(Enhanced Digital Sound) option. Select a mode. Click OK. You will be able to experience a more stereophonic sound in the selected mode. The function is only supported for a computer’s built-in speakers and headphones. Note...
Page 69: Chapter 3. Using Microsoft Windows Vista
Chapter 3. Using Microsoft Windows Vista About Microsoft Windows Vista Welcome Center Help and Support Windows Vista Screen Layout Desktop Start Menu Sidebar / Gadget Window Control Panel Opening the Control Panel User Accounts Phishing Filter User control function Windows Mobile Center The screen shots used in this chapter may differ from actual screens depending on the Windows Vista version and model.
Page 70: About Microsoft Windows Vista
About Microsoft Windows Vista Microsoft Windows Vista (hereafter Windows) is a computer operating system. Since you have to learn how to use it in order to use the computer efficiently and effectively, use the Welcome Center and Windows Help and Support to learn about Windows Vista. The screen layout may differ depending on the computer model and the operating system. Note Welcome Center In the Welcome Center, you can view brief descriptions of Windows Vista functions and run the functions directly. Click Start > Welcome Center. If you click on an item, information on the function is displayed in the description window. For example, if you click View computer details, your computer information is displayed in the description window. In addition, click on Show More details, for more detailed information. Description Window Windows Vista Demo If you click Start > Welcome Center > Show all x items > Windows Vista Demo, you can watch the Windows Vista Note introduction movie.
Page 71: Help And Support
Help and Support Windows Help and Support provides information on Windows basic functions and usages. Click Start > Help and Support. You can find help for frequently used basic functions using Find an Answer and you can search for help by entering a keyword in the Search box. Help Search Find an Answer Introduces the basic usage of the computer and the Windows operation system. Windows Basics You can learn tasks and tools necessary to use the computer. Security and You can view help on computer protection and security. Maintenance Windows O If your computer is connected to the Internet, you can view the necessary information online. nline Table of Contents The help pages are arranged by subject so that users can easily find the relevant information. You can view possible problems that may occur while using Windows and solutions to the Troubleshooting problems. What’s new? You can view help for new Windows Vista features.
Page 72: Windows Vista Screen Layout
Windows Vista Screen Layout Desktop If you turn the computer on, the Desktop screen appears. The desktop is the working area on the computer. It consists of a large workspace and a taskbar at the bottom as shown in the figure below. The screen layout may differ depending on the computer model and the operation system version. Note Recycle Shortcut Gadget Icons Sidebar Start Menu Start System Button Tray with Clock Taskbar...
Page 73 You can drop useless files and folders here. Recycle Bin You can launch programs by clicking the shortcut icons on the Desktop. Shortcut Icons The menu from which you can launch programs. Start Menu Press the start button. The Start menu appears. Start Button Currently running programs are displayed here. Taskbar Shows some running program icons. Icons not being used are hidden. If you click the arrow mark on System Tray with the left, you can view hidden icons. This is a mini information program that appears on the Sidebar. Clock This is a vertical bar that appears at the side of the Desktop. Sidebar This is a mini information program that appears on the Sidebar. Gadget Some items may not be provided depending on the Windows Vista version. Note...
Page 74: Start Menu
Start Menu The menu from which you can launch programs. Click Start ( ). The Start menu appears. Alternatively, press the Windows key ( ) on the keyboard. Fixed Programs Username The program or search Search result is displayed. Computer Control Panel Help and Support All Programs Power Menu Button You can search for files, folders, etc. Lock Button Power Button...
Page 75 Search Enables users to search for files and folders. Shows storage devices such as hard disk drives, CD/DVD drives, network drives, etc. Computer In addition, you can manage files and folders here. Enables users to configure the appearance and settings of Windows such as the Desktop, Control Panel window colors, hardware and software settings, security, etc. Provides on-line help about functions and usage of Windows and troubleshooting. You can find Help and Support a solution to a problem by entering a keyword. Click the Power button to enter Sleep mode. Power Button However, what the power button does changes according to the power button setting. p. 86 To lock the computer, click this button. If you lock your computer, no one can use the computer Lock Button until you enter the password. Power Menu Button Click the Power Menu button to shut down, restart, and logoff from the computer.
Page 76: Sidebar / Gadget
Sidebar / Gadget Sidebar is a vertical bar that appears at the side of the Desktop. A mini program called Gadget runs over the Sidebar which shows information such as stocks, schedule, weather, etc. and provides frequently used tools. You can download various Gadgets from the Internet other than the default Gadget. Sidebar / Gadget Structure If you launch Windows, the Sidebar is automatically launched and the Sidebar and Gadget appear at the side of the Desktop. Gadget Sidebar If the Sidebar is not launched automatically when Windows starts, click Start > All Programs > Accessories > Windows ■ Sidebar to launch it manually. To always display the Sidebar, right-click over the Sidebar and select Properties and then select the Sidebar is always on ■ Note top of Screen option in the Arrangement field.
Page 77 Adding a Gadget You can find a gadget in the Gadget Gallery and add it to the Sidebar. If you click the + at the top of the Sidebar, the Gadget Gallery opens. If you double-click on a gadget, the gadget is added to the Sidebar. You can move a gadget to another location by dragging it with the mouse. ■ Not only can you move a gadget onto the Sidebar but also out of the Sidebar. Note If you place the mouse pointer over a gadget, the close and option buttons appear. ■...
Page 78 Exiting the Sidebar Right-click on the Sidebar icon ( ) in the System Tray with the clock on the taskbar and select Exit to exit the Sidebar. Closing the Sidebar Even if you close the Sidebar, the Sidebar continues running in the System Tray in the clock area, though it is not displayed ■ on the Desktop. Note To close the Sidebar, right-click over the Sidebar on the Desktop and select Close Sidebar. ■ To open the Sidebar again, right-click on the Sidebar icon ( ) in the System Tray with the clock on the taskbar and select Open.
Page 79: Window
Window A window is the basic frame for a computer operation. As an example, let’s see the layout of a Pictures Window. Click Start > Pictures. The items and names may differ depending on your computer model and the Windows Vista version. Note Window Layout Address Display Line Window Button Move Button Search Box Toolbar Sort Order Folder / File Search Window Detailed Information Window...
Page 80 Shows the location of the currently selected folder or file. Address Display Line You can move to the previous or next page by clicking the Back or Next buttons. Opens the previously opened page. Move Button Opens the next page, when you have returned to a previous page. Provides icons to quickly run frequently used functions. Toolbar You can view the drive structure and the currently opened window location. Search Window You can move directly to a folder by clicking the folder in the Search window. Used to resize the window. Minimizes the window. Window Button Maximizes the window. Closes the window. You can search for files by specifying the text included in the filename or within the file or Search Box file attributes. Used to change the sort order of the files. Sort Order The drives, folders and files included on the computer are displayed here. Folder / File Shows the general information of the selected file. Detailed Information Window What is a drive? ■...
Page 81 Window View Functions ► Switching between Windows This function arranges multiple windows in 3D so that If you have set up the Aero function, you can use users can easily view the windows. the window view functions. If you want to use the Aero function, click Press the Windows logo ( ) + Tab keys or click on Note Start > Control Panel > Appearance and Switch Windows ( ) at the bottom left of the Desktop, Personalization > Window Color and and the windows are displayed in 3D. Appearance. Select Window Aero from the color schemes and click OK. ► Preview If you move the mouse pointer over a window button on the Taskbar, you can preview the contents of the window without opening it.
Page 82: Control Panel
Control Panel Tools for configuring Windows are located in the Control Panel. Opening the Control Panel Click Start > Control Panel. System and Using this function, you can configure Windows performance options. Maintenance Using this function, you can check the current security status to protect the computer Security and configure the security settings for the firewall, spyware, etc. Network and Using this function, you can check the network status and configure the settings. Internet You can change the Internet connection settings. Hardware and Using this function, you can add a printer and other hardware, change the settings, and Sound update the device drivers. Using this function, you can remove a program or Windows function and download a Programs new program from the internet. You can set up the mobility, power option and personal settings for your mobile PC. You Mobile PC can also synchronize your mobile PC with another portable device or network folder.
Page 83 User Accounts and You can change the user account settings, passwords and configure the Parental Family Safety Controls function. Appearance and Using this function, you can configure the Desktop style, theme or screen saver Personalize settings. Clock, Language, Using this function, you can configure the date, time, language and regional settings. and Region Using this function, you can select options for hearing and sight impaired persons as Ease of Access well as for challenged persons. You can configure the audio recognition settings. Additional Options Using this function, you can configure other Control Panel item settings.
Page 84: User Accounts
User Accounts Using Windows Vista User Accounts, more than one user can easily share the same PC. The procedures to add and delete a user account and to switch users are described below. Adding User Accounts Click Create a new account to add a new account. Click Start > Control Panel> User Accounts and Family Safety. Click User Accounts > Manage another account. Click Create a new account. Enter a new username and select either Standard User or Administrator.
Page 85 Removing User Accounts If you click Delete files, the account and all files belonging to the account are deleted. If you click Keep files, only the account is deleted and the files belonging to the user are saved on the If there is only one administrator account for the ■ Desktop. computer, you cannot delete the administrator account. Note You can only delete another account when you ■ are logged in as an administrator. Click Start > Control Panel > User Accounts and Family Safety > User Accounts. Click Manage Another Account. Switching User Accounts Click Start ( ) on the taskbar and select Switch Click on the user account to be deleted.
Page 86 Changing the screen resolution and the color The resolution refers to the number of pixels displayed on the screen. When increasing the resolution, the items on the Desktop become smaller and more items can be displayed on the screen. The higher the color quality, the more colors are displayed on the screen. Click Start > Control Panel > Appearance and Personalization > Personalization > Display Settings. Alternatively, right-click on the Desktop and select Personalization > Display Settings from the pop-up menu. The Display Settings screen appears. Change the resolution and color settings and click the OK button. You can check the graphics chipset. To change the resolution, To change the color quality, click slide the resolution sliding bar this button and select a particular to a particular resolution. quality. The following resolutions and color qualities are recommended according to the computer LCD panel type. LCD Type Resolution Color Quality Note WXGA+...
Page 87 Configuring the Start Menu Power Button Click on Change Advanced Power Settings and open Start Menu Power Button in the Power Buttons and Lid item. The Power button on the Start menu ( ) performs various operations depending on the settings. Click Start > Control Panel > Hardware and Sound > Power Options and then Change Battery Settings. Click on Change Plan Settings in the currently selected power setting.
Page 88 Select a power plan and click the OK button. Power Button Type Description Image after Setting Change Sets the computer to enter Sleep mode. The screen and hard disk will be turned off to reduce the power consumption of Sleep the overall system. If you press the Power button on the computer, Sleep mode is deactivated and you can start working immediately. Sets the computer to hibernate. All work is automatically saved, the screen is turned off and the computer makes Hibernate no noise. If you press the Power button of the computer main body, the work environment is restored and you can start working immediately. Shut down the computer. Shut down You have to shut down the computer after closing all programs and opened folders. The Power button is set to Sleep mode by default. ■ If the computer is set to download Windows updates automatically, the update mark ( ) is displayed on the Power ■ Note button when an update is ready. If you click this button, the update is installed and the computer is shut down when the update installation is complete.
Page 89: Phishing Filter
Phishing Filter Phishing is a method used by hackers to illegally collect personal information such as credit card numbers, passwords, other account numbers, etc. through emails or websites. The Phishing Filter protects users from these phishing attempts. If the current page is judged to be a suspicious website, the Phishing Filter displays a warning message with an alarm when the Phishing Filter is enabled. In addition, if a page that the user is currently trying to open is registered as a known Phishing website list, it displays a warning page instead. Phishing Filter Settings Launch Internet Explorer. Select Tools from the menu and click Phishing Filter > Phishing Filter Settings.
Page 90 The Internet Options window opens. Locate the Phishing Filter item in the Settings field. Select Turn on automatic website checking and click the OK button to use the Phishing Filter. To not use the Phishing Filter, select Turn off automatic website checking in the Settings field in Step 3 above.
Page 91: User Control Function
User control function Using this function, you can control the content your children can access. You can determine for how long they can use the computer and the content they can access. When you have finished the settings, click OK to finish. Configuring Parental Controls Click Start > Control Panel > User Accounts and Family Safety > Parental Controls. Select a user to configure the Parental Controls for. The User Controls window for that user opens. Click Parental Controls > Use and configure the necessary settings in the Windows Settings at the bottom. If you click OK, the Parental Controls setting is completed.
Page 92 Using Activity Report To view the Activity Report, click on View Activity Report on the right of the User Controls window. You can view and evaluate your children’s internet access through the Activity Report. If you click the View Activity Report, the following window opens displaying a computer operating Open the User Controls window referring to the summary. descriptions of Parental Controls. Set Activity Reporting to On.
Page 93: Windows Mobile Center
Windows Mobile Center Using Windows Mobile Center, you can easily configure computer settings such as the volume, the wireless network connection settings, the display settings, etc. all at the same time. Some functions may not be supported depending on the Windows Vista version. Note Click Start > All Programs > Accessories > Windows Mobile Center. Alternatively, click Start > Control Panel > Mobile PC > Windows Mobile Center. Battery Status Settings Volume Control Display Connection Settings Easy Network Manager Window Configure the volume, the battery status, the external display, the Sync center, etc. according to your requirements.
Page 94: Chapter 4. Using The Network
Chapter 4. Using the Network Wired Network Wireless Network Connecting to a Wireless LAN Using the Easy Network Manager (Optional) Network Settings Using in Another Location Diagnosing the Network Status Connecting with a Modem (Optional) Bluetooth (Optional) Bluetooth Function Using Bluetooth...
Page 95: Wired Network
Wired Network A wired network is a network environment used for a company network or broadband internet connection at home. Before You Start! You can also configure the network settings using the Easy Network Manager. p. 99 Connect a LAN cable to the computer’s LAN port. Right-click over the Local Area Connection and select Properties. Click Start > Control Panel > Network and Internet > Network and Sharing Center. The LAN Device name may differ depending on your computer’s Network Device. Note Click Manage Network Connections from the left pane.
Page 96 Select Internet Protocol Version 4 (TCP/IPv4) from Configure the IP settings. the Networking tab and click Properties. When using DHCP, select Obtain an IP address automatically. To use a static IP address, select Use the following IP address, and set the IP address manually. The LAN device driver may differ depending on ■ your LAN device model. When not using DHCP, ask your network administrator for the IP address. To add a network component, click Install in the ■ Note Note screen shown in the figure above. You can add clients, services, and protocols. When you have completed the settings, click the OK button. The network settings have been completed.
Page 97 Using both DHCP and a fixed IP Select the Alternate Configuration tab, select User simultaneously configured and fill in the corresponding fields. Using the Alternate Configuration providing by Windows Vista, you can set both automatic and fixed IP addresses and then you can select to use either of them to connect to the Internet. Click Start > Control Panel > Network and Internet > Network and Sharing Center and click Manage Network Connections in the left pane. Right-click over the Local Area Connection and select Properties. Select Internet Protocol Version 4 (TCP/IPv4) from the Networking tab and select Properties.
Page 98: Wireless Network
Wireless Network A wireless network (Wireless LAN) environment is a network environment that enables communicating between multiple computers at home or a small-size office through wireless LAN devices. Before You Start! The descriptions below are for computer models with a Wireless LAN card or device. You can also configure the wireless network ■ settings using the Easy Network Manager. p. 99 A Wireless LAN device is optional. To view the installed wireless LAN card, click Start > Control Panel > Hardware and Sound > Device Manager > Network Adapter and click the + symbol. The figures in this manual may differ from the actual ones depending on your wireless LAN device model. To use the wireless LAN, you have to turn the wireless LAN on first by pressing the Fn + ( ) keys. If the wireless LAN is turned ■ on, the Wireless LAN LED ( ) is lit. Wireless LAN Connections ■ Wireless Ad-Hoc Network Type This connects computers with wireless LAN Wireless network connections can be classified into 3 communications capability.
Page 99: Connecting To A Wireless Lan
Connecting to a Wireless LAN If there is an AP, you can connect to the Internet via the AP using the Wireless LAN connection method provided Ask your network administrator for the network key, by Windows Vista. if necessary. Note Right-click over the Network Connections ( ) icon on the taskbar and click Connect to the Network. When Connected to the AP is displayed, click the Close button. You can access the network. Select an AP to connect to and click Connect. If Checking the network connection status there is a configured network key for the AP to connect to, the Enter Network Key window appears. Move the mouse pointer over the Wireless Network Connection ( ) icon on the taskbar, and the connection Enter the network key in the window and then click status is displayed. the Connect button.
Page 100: Using The Easy Network Manager (Optional)
By configuring the network settings (IP address, printer settings, etc.) for each location, you can immediately access the network without following the network setting procedures each time regardless of your location.  You can diagnose the network status. p. 102 Network Settings This section describes the procedures to connect to Click the Add button. the Internet by setting up a network. The setting up procedures include procedures to add a printer to the network. Select a network location icon and enter the name of the location (e.g. Home). Click the Next button. To use a wired LAN, connect the LAN cable to the LAN port. To use the wireless LAN, you have to turn the wireless LAN on first by pressing the Fn + ) keys. If the wireless LAN is turned on, the Wireless LAN LED lights up. Click Start > All Programs > Samsung > Easy Network Manager > Easy Network Manager.
Page 101 Select Internet Direct Connection and click the Click Add Printer and set up a printer according to Next button. the wizard. When the printer has been added, click the Refresh button, select the newly added printer and then click the Finish button. To not add a printer, click the Finish button. Note When the network settings are complete, the ’Do you want to move to the newly added location Select the LAN device, setup the IP address and now?’ message appears. Click the No button. click the Next button. An icon for the added location is created. The network settings have been completed. If you select ’Yes’, the network settings for the added location are applied. Select Device Select a device to be connected to the Internet. Select either Wired LAN or Wireless LAN. IP Settings To use a static IP address, fill in the fields. For the IP To add a new location, repeat the procedures from address information, ask your network administrator. Step 3 above. Note Obtain an IP address automatically Select DHCP to use this option (automatic IP setting).
Page 102: Using In Another Location
Using in Another Location By configuring the network settings (IP address, printer If the Internet connection is a wireless LAN, you setting, etc.) for each location, you can immediately have to select an AP as follows. access the network in one click, without performing the network setting procedures regardless of your location.  Click on the Network connection ( ) icon on the Taskbar using the touchpad and select Click Start > All Programs > Samsung > Easy Connect to the Network. Network Manager > Easy Network Manager when connected to the Internet. Select an icon that represents the corresponding location from the Saved Locations window and then click Move.  Select an available AP and click the Connect If the Internet connection is a wired LAN, you button. If a network key is required, ask your can immediately load the settings for the new network administrator for the key information.
Page 103: Diagnosing The Network Status
Diagnosing the Network Status You can diagnose the network state and find solutions for The Network Connections window appears. why you cannot connect to the network. Click Start to start the network diagnosis. Launch Easy Network Manager. When the diagnosis is complete, a device with a problem is marked by an exclamation mark icon with a description of the problem at the bottom of the Select Management > Diagnose Status from the window. menu.
Page 104: Connecting With A Modem (Optional)
Connecting with a Modem (Optional) The procedures to connect to the Internet via a phone connection are described below. Before You Start! To connect to the Internet, you have to subscribe to an Internet connection service of an Internet service provider (ISP). ■ A modem port is optional and provided for some models only. ■ Connect the phone cable to the Modem port. Take care to not connect a digital phone line to the modem port. Connect to the Internet according to the instructions of your Internet service provider (ISP). If the Internet connection is terminated abnormally, the connection is not released and the corresponding cost can be accrued. Note...
Page 105: Bluetooth (Optional)
Bluetooth (Optional) Bluetooth is wireless communications technology that allows access to nearby devices such as another computer, a cell phone, printer, keyboard, mouse, etc. without a cable connection. Using Bluetooth, you can exchange files, connect to the Internet, and construct a private network as well as communicate with a keyboard, mouse, printer, etc. without a cable connection. Before You Start! The Bluetooth supporting function is only available between devices (a computer, cell phone, PDA, printer, etc.) and the ■ connection may be restricted according to the profile of the corresponding device. The Bluetooth function is optional and may not be supported depending on your model. ■ Compatibility to devices without the authentication or logo of Bluetooth is not guaranteed. ■ Bluetooth Function You can exchange files between two Bluetooth devices. File Transmission You can exchange files with another Bluetooth device such as another computer, cell phone, PDA, etc. You can connect to another Bluetooth-installed computer in the same way as an Ad-Hoc Network Access mode in wireless LAN and connect to the network via an AP or an Internet connection sharing server. Network Access through a Phone You can connect to the network via a Bluetooth cell phone. Connection Data Sync You can synchronize PIMS data (Outlook E-mail address data) with Bluetooth devices (Synchronization) such as a cell phone, PDA, another notebook computer, etc. Electronic You can exchange business cards with Bluetooth devices such as a cell phone, PDA, Business Card...
Page 106: Using Bluetooth
If the Bluetooth Device window appears, click Add. Using Bluetooth The procedures to exchange files between computers supporting Bluetooth and to use other Bluetooth devices are described below. Using Bluetooth Devices (Connecting Headset supporting Bluetooth) As an example, the procedures to connect to a headset supporting Bluetooth will be described below. Searching for Bluetooth devices corresponds to Steps 1 to 4 and may be slightly different depending on the device. To connect to another device via Bluetooth, double- click the Bluetooth icon ( )on the Taskbar. If the Add Bluetooth Device Wizard screen appears, select the My device is set up and ready to be found and click the Next button. If the the Bluetooth icon does not appear on the Taskbar, click Start > Control Panel > Hardware and Sound > Bluetooth Devices > Options Note and select the Show the Bluetooth icon in the notification area check box. Click OK.
Page 107 When the search is complete, all available Bluetooth Enter the PIN in the device PIN field and click the devices are listed. Select the Headset from the list Next button. and click the Next button. A Bluetooth device is represented by the device For pairing, a PIN is required. Since a PIN is ■ type and name (Dedicated Bluetooth ID). provided by the headset manufacturer, refer to the corresponding manual. To use the Bluetooth headset, Bluetooth Pairing Note ■ Note Mode is required. For the procedures to set up Pairing Mode, refer If the Completing the Add Bluetooth Device Wizard to the Headset Manual. window appears, click Finish. The stereo headset is connected and you can now use the Bluetooth headset normally.
Page 108 Exchanging Files between Bluetooth Select a computer to send the file to and click the Computers OK button. The procedures to exchange files between computers with Bluetooth capability are described below. On the computer which is sending a file (hereafter Computer A), right-click the Bluetooth icon( ) on the taskbar and select File Transfer. Click Browse, select a Bluetooth device to send the file to and click the Next button in the Select Bluetooth Device window. Enter a PIN in the Bluetooth PIN Code field and click the Next button. The Bluetooth PIN Code is a password used for connecting two Bluetooth devices. The user just enters the same PIN Code (E.g. same numbers) on Note both Bluetooth devices to make the connection. Click Browse, specify a file to be sent and click Next button in the Select File to be Sent screen. When the PIN input window appears on the computer to receive the file, enter the PIN from Step 5. When the FTP file access privilege request for the file reception notification window appears, click the notification window. If the Select Access Permission window appears, click the OK button.
Page 109 Usage Instructions  Bluetooth devices to be connected must be within a 3m (10 ft.) distance.  For a better communications environment, there should be no walls or obstacles between the Bluetooth devices.  You can connect to only one Bluetooth device at a time for a phone connection, data syncing, electronic business card exchange, FAX transmission/reception, sound related functions, and serial port functions.  Using the network connection or file transmission function, multiple Bluetooth devices can be connected. However, since connecting to multiple devices may slow down the data rate or make the connection unstable, connecting to one device at a time is recommended.  The Bluetooth function of a Bluetooth PDA, mobile phone, mouse or keyboard may be turned off. To use them in connection with a Samsung computer supporting Bluetooth, you must check if the Bluetooth function of the device to connect to is turned on. For the procedures on turning on the Bluetooth function of a device, refer to the relevant device manual.  The services provided by Bluetooth devices may vary depending on their capabilities. For the services provided by the Bluetooth device, refer to the device manual.
Page 110: Chapter 5. Using Applications
Chapter 5. Using Applications Introducing Programs CyberLink PowerDVD (Optional) Samsung Update Plus (Optional) Play AVStation (Optional) Launching and Screen Layouts Movie Station Music Station Photo Station Play Camera (Optional)
Page 111: Introducing Programs
Introducing Programs Using the software supplied with the Samsung computer, you can easily use functions and troubleshoot problems. Try to use the software after learning about the basic use of the software. For detailed information, refer to the help section of the corresponding software. Before You Start! Every software program may not be provided depending on your computer model. In addition, the screen capture images may differ from actual ones depending on the computer model and software version.
Page 112  Easy Display Manager (Optional)  Play Camera (Optional) Easy Display Manager is a program that displays Using this program, you can directly take pictures and the changed setting on the screen when a setting is record video on the computer. p. 130 changed by pressing the shortcut keys, and enables changing the display mode through the Display Settings window. Management Functions  Samsung Update Plus ( ) (Optional) Samsung Update Plus is a software function that examines and updates the Samsung software and Example) T he icon that appears when pressing the drivers installed on your Samsung computer to the Fn + ( ) keys to change the screen most recent versions. p. 115 brightness.  Easy SpeedUP Manager (Optional)
Page 113 Troubleshooting Functions  SAMSUNG Magic Doctor ( ) (Optional) SAMSUNG Magic Doctor is troubleshooting software provided by Samsung Computer for system diagnosis, and restoring the system. The system diagnosis function enables users to diagnose system problems without assistance from others.
Page 114: Cyberlink Powerdvd (Optional)
CyberLink PowerDVD (Optional) CyberLink PowerDVD is a DVD player program. Before You Start! The CyberLink PowerDVD program is optional and may be not provided for some models. If it is not installed on your hard disk drive, install it using the System Software media (or additional CD). Insert a DVD title into the DVD drive. Then click the Play icon in the control panel of CyberLink PowerDVD to play the DVD title. Select PowerDVD and click the OK button. After a moment, the DVD title will play. Play Undock Player Panel If you click the Undock Player Panel button, the program control panel transforms as follows. Note If the DVD title is not automatically played, click Start > All Programs > CyberLink DVD Suite > Power DVD > CyberLink PowerDVD.
Page 115 Detailed Usage ■ For more detailed usage, click Start > All Programs > Cyberlink DVD Suite > Power DVD > PowerDVD Help. Note DVD Region Code ■ A DVD title has a region code according to the international specifications so that it can be played only in that specific region. DVD titles with a region code will only play on DVD drives and program for playing with the same region code. A DVD drive is sold with an empty region code and the region code is set when the user inserts a DVD title into the drive for the first time. Whenever a DVD title is inserted with a region code different from that of the DVD drive, the region code of the DVD drive is automatically changed to the region code of the DVD title. However, changing the region code of a DVD drive is limited to 5 changes. After that, the region code is permanently fixed to the last region code. If you need to change the region code after changing the code 5 times, contact a service center. Although a service center can help you in this case, you will be charged a service fee.
Page 116: Samsung Update Plus (Optional)
Samsung computer to the latest version. Before You Start! To search for updates and update your computer using Samsung Update Plus, your computer must be connected to the Internet. ■ The update search result may differ depending on your computer model. ■ Samsung Update Plus does not provide updates for applications installed after purchasing the computer. Note To update the software and drivers If you click on Search for new updates, new updates are searched for. Click Start > All Programs > Samsung > Samsung Update Plus > Samsung Update Plus. If this is the first time you are running the program, a window will appear asking you if you agree to the agreement in the window. Click Agree to use this Note software.
Page 117 If there are available software or driver updates for Automatic update items display your computer, the available updates will be listed. By default, your computer is configured to Select the required updates from the list and click on automatically search for updates. If there is a new Note Install Updates to start the update. update available, this is displayed in the notification area. Click the balloon help icon in the notification area. Here you will be able to find the latest available updates. Updates that must be installed separately. If you select Install for an update item that must be installed separately, a message appears informing Caution you of this. Follow the instruction message to correctly install it.
Page 118: Play Avstation (Optional)
This section describes the basic usage of Play AVStation. Before You Start! The screens used in this manual may differ from actual screens according to the program version. ■ For detailed usage, refer to the program help. ■ TV Station is only available for systems supporting the TV function. This computer is not supported. ■ Launching and Screen Layouts To launch the program, click Start > All Programs > Samsung > Play AVStation > Play AVStation. Alternatively, double-click the Play AVStation icon( )on the Desktop. Resize Window And Menu Exit Buttons Station Bar Library Movie You can play a video (movie) file.
Page 119: Movie Station
(Enhanced Digital Image Setting) EDS Button Volume Control (Enhanced Digital Sound Setting) Capture Button Create Highlight/Chapter Button ● What is EDI (Enhanced Digital Image)? EDI (Enhanced Digital Image) is visual quality enhancement technology developed by Samsung Electronics. You can view clearer and sharper images by enabling the EDI function when watching TV or playing a movie on Play AVStation. To enable Note the EDI function, click the EDI ( ) button at the bottom of the TV or Movie Station. Some TV tuner and graphics cards are not supported by EDI. ● What is EDS (Enhanced Digital Sound)? EDS (Enhanced Digital Sound) is sound quality enhancement technology developed by Samsung Electronics. You can listen to clearer sound if you enable the EDS function when playing music or movie on Play AVStation. To enable the EDS function, click the EDS (...
Page 120 Click Menu > File > Open File, select a movie file to be played and click Open. The selected file is automatically registered Note to the Library and played. Playing a Video File in Full Screen ■ 1. Double-click on the current playback screen. 2. The movie is played in full screen. In full screen, to view the movie at the default size, double-click on the current playback screen again. Capturing the Video Screen ■ Click on Capture Current Screen ( ) below the You can view captured images in the Photo Station > Captured Images folder. Captured images are saved in the C:\Samsung\Play AVStation\Data\Capture folder. You can change the captured image folder by selecting Menu > Tools > Options > Capture.
Page 121 Adding Videos to the Library Select a target folder and select Video Files option in the Target File Type field. The Movie Library is a library with movie files to be used by Movie Station. The procedures to add movie files saved on the computer to the Library are described below. The movie files found in the selected folder are added to the Library. You can add files or folders. As an example, the procedures to add folders are described below. The movie files used in Play AVStation are Select Menu > File > Add to Library > Folder. automatically added to the Library. Note...
Page 122 Highlight / Chapter Function To watch a highlight, double-click a file made and click the Highlight icon at the bottom right of the Using the Highlight function, you can watch a highlighted current movie file. part of a movie such as a sports or news item, etc. Using the Chapter function, you can create chapters for a movie and play the movie from any of the chapters. The Highlight/Chapter function works on the basis of specific standards depending on the target video. Therefore, the result of the function may differ from Note the user’s intention. Select a movie and click Make Highlight/Chapter at the bottom of the window. Chapters Highlight ON/OFF The highlight is played. If you click on a Chapter thumbnail, the corresponding Chapter is played. Select the movie type (Sports, News, Other). A Highlight / Chapter is created.
Page 123: Music Station
Music Station Launch Play AVStation and click Music on the Station Bar. Music Type Music Search Music Library Playlist Window Repeat Setting Volume Control Random Play Play Control Buttons Setting...
Page 124 Playing an Audio CD The CD is played. The procedures to play an audio CD are described below. Insert an audio CD into the CD drive. If a CD is already inserted in the CD/DVD drive, select CD in the Audio CD folder of the Library and double-click the title. The CD is played. Note If the AutoPlay window appears, select Play audio CD using Samsung PLAY AVStation.
Page 125 Playing a Music File If a music file is registered to the Music Library, you can easily play the music file. For the procedures to register tracks to the Library, refer to p. 125. Move to Music Station and double-click on All Music. Double-click a music file. The file is added to the playlist and played. Play a Track not registered to the Library Click Menu > File > Open File, select a music file to be played and click Open. The selected track is registered to the Library and played. Note...
Page 126 Adding Music Files to the Library The music files found in the selected folder are added to the Library. The music files are registered. The Music Library is a library with music files used by Music Station. The procedures to add music files saved on the computer to the Library are described below. You can add files, folders. As an example, the procedures to add a folder are described below. Select Menu > File > Add to Library > Folder. The tracks played in Play AVStation are automatically added to the Library. Note Select a target folder and select the Audio File option in the Target File Type.
Page 127: Photo Station
Photo Station Launch Play AVStation and click on Photo on the Station Bar. Photo Library Photo List and Thumbnail Window View and Edit Button Batch Edit Button SlideShow Button...
Page 128 Viewing an Image Click on To The list Screen to return to the list. The procedures to view images registered to the Photo Library individually and via a SlideShow are described Viewing an image not registered to the Library ■ below. Click Menu > File > Open File, select an image For the procedures to register image files to the Library, file to view, and click Open. Note refer to p. 129. The selected image file is registered to the Library and displayed in the Preview window. Viewing images using the SlideShow function ■ Move to Photo Station and double-click on All Click the SlideShow button at the bottom of the Images.
Page 129 Editing an Image If the Preview screen appears, click the Edit button at the bottom left. If the image editor screen appears, You can change the shape of an image, edit an image edit the image using the Edit tools at the bottom of or apply special effects to an image. The image editing the window. functions are described below. Click to switch to the Click to save the Preview screen edited image Move to Photo Station and double-click on All Images. Click on a folder which includes images, and the images in the folder are displayed. Double-click on an image or click the View and Edit button at the bottom right to switch to the Preview screen. Image Editor Window Edit Tools Click on Original View to edit the image comparing it to the original. Note You can save an edited image by clicking the Save or Save As button.
Page 130 Adding Images to the Library The Photo Library is a library with image files to be used by Photo Station. The procedures to add image files saved on the computer to the Library are described below. You can add files, add folders. As an example, the procedures to add folders are described below. Select Menu > File > Add to Library > Folder. Select a target folder and select the Image File option in the Target File Type field. The image files found in the selected folder are added to the Library. The image files used in AVStation are automatically added to the Library. Note...
Page 131: Play Camera (Optional)
Play Camera is a program that enables users to take still pictures or record videos using the camera installed on the computer. Before You Start! The program versions described in this manual are subject to change and the screen images and terms in this manual may differ ■ from actual ones. For more information on how to use the program, refer to the online help. ■ Do not take pictures or record video of someone without their permission. ■ Do not take pictures or record video in locations where photography is prohibited. ■ Note Do not take pictures or record video in locations where you could violate another person’s privacy. ■ Click Start > All Programs > Samsung > Play If you right-click over the Preview window using the Camera > Play Camera. Touchpad, you can set up the camera, resolution, device and save folder. Note Window Control Preview Window and Exit Buttons Place an object in front of the camera over the LCD and click the Snapshot ( ) or Record ) button. A still picture is taken or video starts recording. To stop a video recording, click the Stop ( button. The recording is stopped.
Page 132: Chapter 6. Settings And Upgrade
Chapter 6. Settings and Upgrade LCD Brightness Control BIOS Setup Entering the BIOS Setup The BIOS Setup Screen Setting a Boot Password Changing the Boot Priority Upgrading Memory Battery Installing/Removing the Battery Charging the Battery Measuring the Remaining Battery Charge Extending the Battery Usage Time Using the Security Lock Port...
Page 133: Lcd Brightness Control
The LCD brightness can change up to 8 levels and the brightness increases by 1 level when pressing the Fn + ( ) key once. Maintaining the changed LCD brightness even after turning the computer on again ■ To maintain the LCD brightness set by using the brightness control keys or through the Power Options, follow the procedures below. Note 1. Turn the computer on and press the F2 key when the SAMSUNG logo appears on the screen to enter the BIOS Setup. 2. Select the Boot menu and set the Brightness Mode Control item to User Control. 3. Press the F10 key to save the settings and exit Setup. Saving battery power consumption ■ Decrease the LCD brightness when the computer is running on battery power or select Samsung Optimized in Easy Battery Manager to save battery power consumption. Easy Battery Manager is optional and may not be surpported depending on your model. Defective LCD Pixels ■...
Page 134: Bios Setup
BIOS Setup The BIOS Setup enables you to configure your computer hardware according to your needs. Before You Start! Use the BIOS setup to define a boot password, change the booting priority, or add a new device. ■ Since incorrect settings may cause your system to malfunction or crash, take care when configuring the BIOS. The functions of the BIOS setup are subject to change for product function enhancement purposes. ■ The BIOS Setup menus and items may differ depending on your computer model. Note Entering the BIOS Setup Turn the computer on. When the booting screen (SAMSUNG logo) appears, press the F2 key to enter the BIOS Setup.
Page 135 After a moment, the BIOS setup screen appears. The items in the BIOS setup may differ depending on the product. Setup Menu Help Help for the selected item appears automatically. Setup Items...
Page 136: The Bios Setup Screen
The BIOS Setup Screen Menu Description Main Used to change the basic system and environment settings. Advanced Used to configure advanced functions on your computer around devices and chipsets. Security Used to configure security functions, including passwords. Boot Used to set the boot priority and other boot options Exit Used to exit the Setup either saving the changes or not.
Page 137 System Setup Keys In the Setup, you have to use the keyboard. Press to view the Setup Help. Up & Down Keys Press to move up and down. F5/F6 Press to change the item value. Press to load the default Setup settings. Press to return to a higher level menu or to move to the Exit menu. Left & Right Keys Press to move to another menu. Enter Press to select an item or to enter a sub menu. Press to save the changes and exit Setup.
Page 138: Setting A Boot Password
Setting a Boot Password When setting a password, you have to enter a password to use the computer or enter the BIOS Setup. By configuring a password, you can restrict system access to authorized users only and protect data and files saved on the computer. Before You Start! Do not lose or forget your password. If you have forgotten your password, contact a Samsung service center. In this case, a service fee will be charged. Setting a Supervisor Password Enter a password, press <Enter>, re-enter the password for confirmation, and press <Enter> again. A Supervisor Password is required to turn the computer The password can be up to 7 alphanumeric on or to start the System Setup. characters. Special characters are not allowed. When setting a Supervisor Password, users other than a supervisor cannot use the computer. Select the Security menu in the BIOS Setup. In the Set Supervisor Password item, press <Enter>. When a message confirming the password configuration appears in the [Setup Notice] window, press <Enter>. The supervisor password has been set. The supervisor password is required to turn the computer on or to enter the BIOS Setup.
Page 139 Setting a User Password Setting Up a Boot Password To setup a boot password, the administrator password Users can start the system with a user password, but (Set Supervisor Password) should be set in advance. cannot enter the System Setup. By doing this, you can prevent other users from entering Setup. Set the Password on boot item to Enabled. Once a boot password is set, you have to enter a password to boot up Before configuring a user password, a supervisor the computer. password must have been configured. Deactivating the supervisor password also deactivates the user password. In the Set User Password item, press <Enter> and Deactivating the Password complete the procedures from Step 3 of Setting a Supervisor Password. Press <Enter> on the password to be deactivated. Setting up a Hard Disk Drive Password For example, to deactivate a supervisor password in (Optional) the Set Supervisor Password item, press <Enter>. A supervisor password must be set using the Set Supervisor Password menu.
Page 140: Changing The Boot Priority
Boot Device Priority Press <Enter> on the Boot Device Priority item. Boot priority order: ▼ IDE CD : xxxxxxxxxxxxxxxxxxx ▼ IDE HDD : SAMSUNG xxxxxxx ▼ USB KEY : Not Installed ▼ USB CDROM : Not Installed ▼ USB FDC : Not Installed ▼ USB HDD : Not Installed Boot Device Priority ▼...
Page 141: Upgrading Memory
Upgrading Memory One or more memory modules are installed on the computer. There are 2 memory slots and users can replace the installed memory or add new memory. Before You Start! Replace or install new memory only after shutting the computer down completely. Do not replace or install memory when the ■ computer is in Sleep mode. Disconnect mains power and remove the battery before continuing. ■ To utilize the dual channel feature, using memory modules with the same specifications (of the same capacity and from the same ■ manufacturer) is recommended. Only use the same type of memory as specified in the Product Specification. ■ Adding a Memory Module Insert a new memory module into the memory slot at an angle of approximately 30 degrees aligning it to the angle of the memory slot. Remove the screw on the memory compartment cover at the bottom of the computer using a screw driver. Fixing Screw...
Page 142 Push the memory module down so that it is Close the memory compartment cover and fasten completely fixed. If the memory does not fit easily, the screw. push the memory module down while pulling the memory module latches outward. Removing a memory module Pull the memory module latches outward. The Note memory module will pop up. Remove the memory module out at an angle of 30 degrees.
Page 143: Battery
Battery Please refer to the following instructions when running the computer on battery power without connecting the AC power. A Lithium-Ion smart battery is supplied with this computer. Before You Start! Carefully read and follow the precautions printed on the battery before using the battery. Precautions Use only chargers specified in the User Manual. Caution Never heat the battery pack, put it near or in a fire or use at a temperature higher than 60°C, as this may cause fire. Never cause a short circuit between the battery pack terminals or disassemble the battery pack. Carefully read and follow the precautions printed on the battery and the safety instructions in the User Manual before using the battery. Please refer to the system operation environment ( p. 190) of this manual and operate and store the battery at room temperature. Installing/Removing the Battery Shutdown the system, close the LCD panel and To install the battery again, slide the battery into the place the computer upside down on a flat surface. system. The battery latches move inwards and fix the battery automatically. Pull the two battery latches outwards ( ), then remove the battery. Check if the battery latch has been moved inwards. Note...
Page 144: Charging The Battery
To view on the battery Charging the Battery Separate the battery and press the PUSH button inside Attach the battery and connect the AC adapter to the the battery. The remaining battery charge (%) will be displayed. DC-in jack of the computer. The battery will then start charging. When charging is complete, the Charge LED turns green. Status Charge LED Charging Battery Warning You will hear an alarm when the remaining Charging complete Green ■ battery charge reaches below 10%. Note AC adapter not connected In this case, connect the AC adapter or turn off the computer and install a fully charged battery. If the battery residual amount is 3~5%, the ■ computer automatically shuts down after saving the data. The battery residual amount may vary Measuring the Remaining Battery Charge depending on the computer model.
Page 145: Extending The Battery Usage Time
Extending the Battery Usage Time Decreasing the LCD Brightness Press the Fn + ( ) keys on the keyboard to decrease the LCD brightness to extend the battery usage time. Using Easy Battery Manager (Optional) Easy Battery Manager is a power management program that enables using the battery power efficiently. You can select an optimized power mode according to your requirements. Easy Battery Manager is optional and may not be surpported depending on your model. Note Click Start > Control Panel > Hardware and Sound > Power Options. Alternatively, right-click the power measuring device icon ( ) in the notification area of the taskbar and select Power Options. If the following screen appears, select one of the modes. Samsung Optimized Multimedia...
Page 146 Samsung Optimized This mode is appropriate for normal conditions. It maximizes the system performance when the computer is running on AC power while maximizing the battery usage time when the computer is running on battery power. Multimedia This mode is appropriate for a multimedia environment that requires maximum system performance. Therefore, the battery usage time may be reduced in this mode. Using the Easy Battery Manager power options To use the Easy Battery Manager power options after reinstalling Windows, you have to install the Easy Battery Manager manually using the system software media. Note Since power options in Easy Battery Manager aim at maximizing the battery usage time, programs requiring high performance may slow down when using the battery. In this case, it is recommended connecting the AC adapter or selecting Power Saver.
Page 147 Using the Battery Calibration Function Highlight Yes in the Battery Calibration Confirmation window and press <Enter>. When charging/discharging the battery repeatedly for a The Battery Calibration function is activated and short time only, the battery usage time may be reduced by the battery is forcefully discharged. To stop the the difference between the actual battery charge and the operation, press the (Esc) button. remaining charge display. This operation requires 3~5 hours depending on the In this case, the actual battery charge and the remaining battery capacity and the remaining battery charge. charge display will be the same by discharging the battery completely using the Battery Calibration function, and then recharging it again. Disconnect the AC power adapter after turning off the computer. Restart your computer and press the F2 button when the Samsung logo appears, to start the BIOS Setup. Move to the Boot > Smart Battery Calibration item using the direction keys and press <Enter>.
Page 148: Using The Security Lock Port
Using the Security Lock Port You can connect a Kensington lock to the Security Lock port to prevent your computer being stolen when you have to use the computer in a public place. To use this feature, you have to purchase the Kensington lock additionally. To use the Kensington lock, refer to the product manual. Tie the Kensington lock cable to a fixed object and install the other end of the cable to the Security Lock port.
Page 149: Chapter 7. Windows Media Center
Chapter 7. Windows Media Center About Package Contents and the Program Guide 149 Connecting and Setting Up Media Center Optional Devices Using Media Center Start Screen Layout Pictures + Videos Music TV + Movies Windows Media Center is provided for some versions of Windows Vista only. Therefore, this chapter is for models with Windows Media Center only.
Page 150: About Package Contents And The Program Guide
About Package Contents and the Program Guide About the Package Contents The package contents of your Samsung computer may differ depending on the computer model. The Media Center remote control, external-type remote control sensor and TV tuner card are not supplied with your computer and the devices are not required to use Media Center. However, if you purchase and connect the devices, you can more easily use the various Media Center features. About the Program Guide An electronic TV program guide, the Electronic Program Guide (EPG) is provided by the EPG provider and the contents of the EPG may differ from the actual TV program depending on programming changes by the EPG provider or broadcast station. You can use the Media Center TV function only when there is an installed TV tuner card. ■ The contents of this manual are subject to change for product improvement purposes. ■ Note...
Page 151: Connecting And Setting Up Media Center
Connecting and Setting Up Media Center The basic usage of Media Center for Microsoft Windows Vista Home Premium is described below. Before You Start! This manual will describe procedures assuming that you are using Media Center with a mouse. ■ Since Media Center supports the use of a mouse, keyboard and remote control, in this manual, [Select] means clicking with the ■ mouse or pressing the corresponding button on the remote control. Optional Devices The remote control, external-type remote control sensor and TV tuner card are not essential for using Media Center. Since these devices are not supplied with your Samsung notebook computer, you have to purchase them additionally if necessary. Remote Control Using the Media Center remote control, you can use Media Center more conveniently over a short distance. External-Type Remote Control Sensor To use Media Center using a remote control, you have to install the remote control sensor on the computer. When purchasing a remote control, purchase an external-type remote control sensor at the same time. ■ Connect the external-type remote control sensor to the USB port of the computer and turn the sensor so that it faces the remote control.
Page 152 TV Tuner Card ► Connecting the TV antenna Using a TV tuner card, you can watch and record TV To use the Media Center TV function, you have to connect programs. the TV antenna to the TV tuner card. Some models have built-in TV tuner cards. This manual If your computer has a built-in TV tuner card, connect the describes their usage assuming your computer has a TV antenna cable to the TV Antenna Input port. built-in TV tuner card. If you do not have an installed TV tuner card, you There are two types of TV tuner cards, built-in cannot use the TV function. and external types, and they may not support a Note recording function depending on the model. Caution Connecting Devices ► Connecting an external-type remote control sensor Connect the external-type remote control sensor to the USB port of the computer. ► Connecting to the Internet To view the TV Guide or to move to Media Center sites in Media Center, you have to connect to the Internet.
Page 153 Media Center Setup If the following start screen appears, select the installation option. Connect all necessary devices and setup Media Center. Express Setup enables you to use the basic You have to complete the settings to use Media Center. functions of Media Center when clicking OK. However, you cannot use TV and Internet related functions using Express Setup. Turn the computer on. Custom Setup allows you to configure all settings including TV and Internet settings. If you click OK, the Setup Wizard starts. Click Start > Windows Media Center or Start > All Programs > Windows Media Center. To setup the TV or Internet after an Express Setup, select Tasks > Settings > General > Windows Media Center Setup in the Media Center start screen and Note setup the following items.
Page 154 If you have selected Custom Setup, continue with Changing the Media Center settings the setup according to the Setup Wizard instructions. You can change the settings by selecting Tasks If there are no installed TV tuner cards, the TV > Settings in the Media Center start screen after Note completing the Configuration Wizard. related setup steps will appear during the Media Center setup. In addition, if the computer is not connected to the Internet, you cannot setup and use the TV Guide (Channel Information). When the Media Center setup is complete, click Finish. Now you can use the Media Center.
Page 155: Using Media Center
Using Media Center The descriptions of the Media Center start screen and basic functions will be given below. Start Screen Layout Before You Start! If you selected Run Setup Later in the Media Center start screen or did not complete the Setup Wizard, the Setup Wizard screen appears when launching Media Center. If you complete the setup, the Media Center start screen appears. Click Start > Windows Media Center or Start > All Programs > Windows Media Center. Move to the Media Center Start Screen Exit Media Move to the Center Previous Screen Resize...
Page 156: Pictures + Videos
Pictures + Videos: You can view pictures, images and Pictures + Videos video files. In Pictures + Videos, you can view pictures and videos Music: You can listen to music files, audio CDs and the registered to the Media Center library. radio. In addition, you can also view files not registered to the TV + Movies : You can watch and record TV programs library by registering them, as well as viewing files on a and play DVD titles. removable disk. Online Media: You can access all kinds of multimedia content over the . Registering to the Library Tasks: You can change the Media Center settings. The procedures to register files to the library are described below. Navigation Arrow: If you move the mouse pointer over the arrow, you can navigate through the menu in the up, down, left and right directions. Launch Media Center, and select Pictures + Videos > Picture Library or Video Library. The Menu and Play Control buttons appear for a moment only when moving the mouse pointer. The Media Player window size decreases if you perform...
Page 157 Viewing Pictures and Images If the Library Setup screen appears, select Add Folder to Watch. The procedures to view pictures and images registered to the library are described below. Specify the path for the folder according to the instructions on the screen. Picture and image files are saved in the Computer > Local Disk (C:) > Users > User Accounts > Picture Folder or Computer > Local Disk (C:) > Note Users > Public > Public Pictures folder. If the following screen appears, click Finish. You can view the newly added folder in the Picture Library or Launch Media Center, and select Pictures + Videos. Video Library.
Page 158 Viewing Videos If you select a picture, the picture is displayed in full screen. The procedures to view videos registered to the library are You can view another picture by using the Play described below. Control buttons or the direction buttons on the keyboard. Video files are saved in the Computer > Local Disk (C:) > Users > User Accounts > Video Folder or Computer > Local Disk (C:) > Users > Public > Note To view pictures in a SlideShow, click on Play Public Video folder. SlideShow. Launch Media Center, and select Pictures + Videos. Alternatively, select Pictures + Videos >...
Page 159 Viewing Pictures and Videos Saved on After a while, a window notifying you that new media Removable Media has been found appears. Select View Pictures or View Videos. The procedures to view pictures, images and videos saved on removable media in Media Center are described below. Launch Media Center. Insert a removable media with picture, image or video files. Removable media refers to a CD, DVD, USB flash memory, memory card, etc. If the file list appears, select a file. To view pictures saved on a digital camera, connect the digital camera and the computer using a USB cable. Note View the picture or video.
Page 160: Music
Music In Music of Media Center, you can play music files or Select Copy CD at the bottom left of the Music audio CDs. In addition, you can rip the tracks of an audio Player window. CD onto the computer and play them later individually or by using a playlist. Playing an Audio CD Launch Media Center. Press the Eject button of the CD-ROM drive to open the CD tray and insert an audio CD. The tracks on the CD are played automatically. When running the Rip CD function for the first time, Ripping an Audio CD the Ripping Options appear. Configure the ripping options according to the instructions on the screen, Note and complete the following procedures. From the Launch Media Center. second time the program is run, the setup options are omitted. Insert an audio CD into the CD-ROM drive and play the CD.
Page 161 If the Rip CD window appears, click Yes. If you select Music Library, the album list appears including the ripped album. Ripping a CD begins by showing rotating CD icon on the right side that indicates ripping a CD is in progress. When ripping is complete, the ripping CD complete message appears. The ripped tracks are displayed in the Music > Music Library of Media Center and in the Library of Windows Media Player. The ripped tracks are copied Note to Start > Music of the Desktop as album files. To change the folder to save the ripped tracks to, launch Windows Media Player and right-click over the top taskbar and select More Options > Rip Ripped music albums Music > Rip music to this location from the pop- up menu. Select an album to be played and click Play Album in the left pane. Playing Ripped Tracks The album is played.
Page 162 Using Playlists The + mark starts blinking at the bottom left of the Media Player window and disappears the selected You can easily create, manage and play a playlist with music files are added to the queue. ripped music albums and music files downloaded from the Internet. Launch Media Center, and select Music > Music Library. You can search for a music file by selecting the album, artist, genre or song at the top. If you select Playlist > All Music, all registered music files are listed. Select the music files to be added to the playlist and Media Player Window click Add to Queue in the left pane. Select the Media Player window at the bottom left and click View Queue.
Page 163 Select Save As Playlist, enter a playlist name and If a music file appears in the Media Center ■ select Save. If you have a remote control, you can even after the file has been deleted enter a name using the numeric buttons on the If you deleted a music file, you must also Note remote control. manually delete the file from the Media Center playlist. Deleting a playlist from Media Center ■ Select Media Center > Music Library > Playlist, select a saved playlist and click Delete. Then the selected playlist is deleted.
Page 164: Tv + Movies
TV + Movies Play DVD: The DVD title Before You Start! appears. The TV function is only available when a TV tuner card is installed on your computer. TV + Movies Menus Search: You can search for a program by the title, Live TV: You can watch live TV programs. keyword or genre. Recorded TV: You can watch recorded TV programs. What is a TV Program Guide - EPG? An Electronic Program Guide (EPG) is a TV program guide. You can select a program and view detailed Note information on that program or easily reserve a recording. The guide information is updated by Guide (TV Broadcast Program Media Center more than once a day. Guide - EPG) You can view the TV program guide. You can watch or record...
Page 165 Watching TV Recording a TV Program The procedures to record the current program and reserve a recording will be described below. Launch Media Center and select TV + Movies. ► Recording the current program Select Live TV or Guide from the menu. Moving the mouse will display the play control buttons. When the play control buttons appear, click ■ When Live TV is selected the Record( ) button. A TV program is played immediately. Switch to the A red dot appears indicating that a recording is in channel you want to start watching it. progress and the recording begins. ■ When Guide is selected When the Guide List is displayed, select a program currently being broadcast. The program on the selected channel is displayed. To stop the recording, right-click and select Stop Recording from the pop-up menu.
Page 166 Watching a recorded program ► Recording or reserving a recording in the Guide Recorded files are saved in the Computer > Local Disk (C:) > Users > Common > Recorded TV Launch the Media Center and select TV + Movies. Note folder. Launch Media Center and select TV + Movies. Select Guide from the menu. Select Recorded TV from the menu. Move to a program to be recorded. Right-click over a program to be recorded and select Record. A red dot appears over the program list. Select a program you want to watch in the following window.
Page 167 Playing a DVD After a moment, the DVD menu is displayed. It the DVD menu is not automatically displayed, The procedures to watch a DVD title are described below. select Play DVD in the start screen. Launch Media Center. Press the Eject button of the DVD drive to open the tray and insert a DVD title. If you insert a DVD title without starting Media Center, the Auto Play selection window appears. Select Play DVD Video using Media Center and Note click OK. Select Watch Movie or Play from the DVD menu. The DVD title is played. If you move the mouse, the Play Control buttons appear. Using the Play Control buttons, you can play the DVD from a particular point or stop playing the DVD.
Page 168 Online Media You can access more online content through Online Media. Online Media is a service provided by content providers via the Media Center. You can enjoy all kinds of multimedia content such as movies, news, sports, etc. over the Internet. To use Online Media, your computer must be ■ connected to the Internet. For problems encountered while using Online ■ Note Media, contact the corresponding online service provider. Online Media content services are not the responsibility of the computer manufacturer.
Page 169 Chapter 8. Appendix Using McAfee SecurityCenter (Optional) Using Samsung Magic Doctor (Optional) Reinstalling Software Q & A Display Related Modem Related Wired Network (LAN) Related Wireless Network (WLAN) Related Game and Program Related Bluetooth HD DVD Blu-Ray Other Intel Turbo Memory Device (Only for some models) Q & A Product Specifi cations Glossary Index...
Page 170: Using Mcafee Securitycenter
Using McAfee SecurityCenter (Optional) A computer virus is a program that damages computer files and information saved on a computer. A computer is infected by an already infected file or by another computer over the Internet. Let’s learn how to use McAfee SecurityCenter in order to scan and remove viruses and to protect your computer from various threats on the Internet. Before You Start! ■ When McAfee SecurityCenter is run for the first time, the Registration screen appears. Register according to the instructions on the screen. You have to register the software to protect the PC with the latest security information. ■ If you cannot find McAfee Security Center icon on the Taskbar or a shortcut icon on the Desktop, then double click McAfee Web Essentials icon and install the program. ■ If you install McAfee SecurityCenter and another anti-virus program (e.g. Norton Internet Security, Kaspersky, etc) on the same computer, your computer performance may become degraded and your computer may not be protected from threats due to a conflict between the programs. It is highly recommended installing only one security program. Scanning and Curing Viruses If a virus is found, remove the virus according to the instructions on the screen. Click Start > All Programs > McAfee > McAfee SecurityCenter. If a virus is found, remove the virus according to the instructions of the Restoration Wizard. Click Scan from the left pane of the program. To protect yourself against the latest viruses, update McAfee SecurityCenter regularly.
Page 171: Using Samsung Magic Doctor (Optional)
Using Samsung Magic Doctor (Optional) Magic Doctor is troubleshooting software provided by Samsung Computer. A user can diagnose system problems via one-click or by selecting diagnostic items. Before You Start! The screens used in this manual may differ from actual screens according to the program version. Diagnosing the System When the system diagnosis is completed, the diagnostic result appears. If problems are found, Diagnosing the System is a function to check system click the Cure button to correct the problem. connections and diagnose problems affecting to system Samsung Magic Doctor starts the corrective operation and solve it. operations. Click Start > All Programs > Samsung > Samsung Magic Doctor > Samsung Magic Doctor. Click on Diagnose the System to start diagnosing the system.
Page 172 Viewing My Computer Information You can view detailed information about your computer in Samsung Magic Doctor. Click on the icon in the shape of a monitor at the bottom of the main program screen to view detailed information about the computer.
Page 173: Reinstalling Software
Reinstalling Software You can reinstall software using the System Software Media, when a device driver or computer application is not working properly. Before You Start! When software is not working properly, it is recommended removing the software using the Add or Remove Programs of the Control Panel and reinstalling the software using the System Software Media. The System Software Media is supplied as a CD or DVD depending on your computer model. Running the System Software Media The System Software Media will launch. Select an instillation option to start the installation. The System Diagnosis function enables users to diagnose the system connectivity, any system problems and resolve these problems. Insert the System Software Media into the CD drive. If the Auto Play window appears, select Run SoftwareMedia..in the Install or Run Program field. In the User Account Control window, click Allow. If you are not logged in with an administrator account, you have to enter an administrator password in the User Account Control window. Caution...
Page 174 If you select this option, programs not currently installed on the computer are listed.  Standard Installation  If you select this option, programs are listed that need to be installed on the computer (drivers, Minimum Installation Windows updates, etc.). You can conveniently use this option, when you need to install essential programs only.  If you select this option, you can select the programs to be installed. Custom Installation You can conveniently use this option, when you need to install an individual driver or program that is causing a problem. Installing Software If the Start Standard Installation window appears, click the Yes button.
Page 175: Q & A
Q & A This section provides information on possible problems, solutions and other references for using the system. Display Related When I connect a projector, and change the The LCD screen is too dark or too bright. settings to display the screen image on both the LCD and the projector by pressing the Fn+ ), the screen is not displayed properly.
Page 176: Modem Related
I have connected a monitor (or projector) to Modem Related the computer, but the colors on the monitor are abnormally displayed. I cannot hear the modem A Check if the monitor and computer are properly connected with the signal cable and reconnect the A1 Check if the phone line is properly connected to the cable if necessary. modem. A2 Check if the modem driver is properly installed. I am trying to view the screen through a TV (or a ...
Page 177 When you are unable to make a call when using a switchboard When using the modem overseas A In general, the dial tone of a switchboard or a digital A1 Check if the country setting of the modem is set to phone switching system is not continuous unlike that the current country. of a PSTN line. Therefore, the modem may not make Since each country has slightly different a phone call as it misreads the dial tone as a busy telecommunication values, if the location is not set tone. In this case, perform the following. to the corresponding country, the modem may fail to make a phone call. Use the AT Command  Click Start > Control Panel > Hardware and Add the ATX3 command for initialization.
Page 178: Wired Network (Lan) Related
How can I receive a FAX in Sleep mode (Standby Wired Network (LAN) Related Mode)? A To receive a FAX when the computer is in Sleep The <Wake On LAN> function Mode (Standby Mode), the computer must be configured as follows. A1 <Wake On LAN> is a function that activates the The FAX program must be configured so that it system from Sleep mode when a signal (such as receives FAXES automatically referring to the FAX a ping or magic packet command) arrives over the program manual. network (wired LAN).  Click Start > Control Panel > Hardware and Sound.
Page 179: Wireless Network (Wlan) Related
Wireless Network (WLAN) Related  Click Start > Control Panel > Network and I cannot find an AP. Internet > Network and Sharing Center > Manage Network Connections.  Right-click on the Wireless Network Connections A Verify whether the Wireless LAN LED is on. and select Disable. If it is turned off, turn it on by pressing the Wireless LAN On/Off button (Fn + When I am connected to a 100Mbps/1Gbps wired LAN and the computer exits Sleep/hibernation The Wireless LAN device is operating properly, mode, a message appears informing you of a...
Page 180 The signal strength is excellent, but I cannot connect to the network. I cannot connect to the AP. ► Even if the signal strength is excellent, the ► Check the Computer Settings network connection may not operate properly A1 Select Start > All Programs > Accessories > if the TCP/IP properties are not properly Windows Mobile Center and check the wireless configured, or the network key (encryption key)
Page 181 A2 Verify whether the same network key (encryption A6 Check the network key settings (encryption key) has been entered for both the AP and the key) again. When automatic code conversion (a computer. The network key is an encryption key for passphrase function) has been selected and data encrypting the data transmitted between the AP and communication is not functioning even with a normal the computer. It is recommended setting the network wireless connection, it is recommended entering the key manually. network key (encryption key) manually. ► Check the AP Settings A7 Check the AP settings as follows. (The following is recommended for a standard environment and thus For the AP settings, refer to the User Guide provided may differ according to the specific wireless network by the AP manufacturer. environment.) A3 Verify whether the environment is suitable for using ● When several APs are present simultaneously, a wireless LAN. The use of a wireless LAN may be check the channel settings for each AP. When restricted according to the environment and distance. different APs are using nearby channels, Obstacles such as walls or doors affect the use of interference may occur between the electronic a wireless LAN. Install the AP in a high and open waves. Set the AP channels further apart from space, 50cm from the wall and far removed from any each other. (Ex: Ch1, Ch5, Ch9, Ch13) other radio signal sources.
Page 182 I cannot connect to a computer connected to the During the wireless Ad-Hoc network operation, Ad-Hoc network. the AP (Access Point) is intermittently not found. A1 Check the security settings and network name of the A This problem occurs intermittently during the wireless wireless Ad-Hoc network. Ad-Hoc network operation. Even if this problem occurs, the wireless Ad-Hoc network operation is A2 Check the TCP/IP settings of the computers working properly and is not affected. Click Refresh to connected to the wireless Ad-Hoc network. The IP update the AP list. addresses of the computers to be connected to a wireless Ad-Hoc network must be set to the same sub-network address. I have set the same IP address for both the ● For example, if the TCP/IP setting is configured wireless and wired connections, but they do not...
Page 183: Game And Program Related
Game and Program Related The wireless LAN does not work properly when Windows Vista may not provide some functions properly there is a device operating on an adjacent when performing some applications especially games, or frequency in the vicinity of the product. may cause a problem due to a device driver compatibility issue. For the latest device drivers and bug fixes, please refer to the respective company’s website. A1 Channel interference may occur when a wireless video transceiver or a microwave oven is being used. If you experience channel interference from other A 3D game does not work, or some functions are equipment, we recommended changing the channel not working.
Page 184: Bluetooth
Bluetooth The picture on the screen is displayed as a When no headset is found or cannot be broken image for some games. connected A A part of the picture on the screen may be broken A1 If the headset is already connected to another when playing some games that require a high- device, you will not be able to find the headset and specification graphics card. cannot connect to the headset even if the headset is In this case, set the 3D function setting for the game found. Disconnect the connection to the other device to a lower value or set the game resolution to a lower and then start the search again. value. A2 If the headset is connected to a power adapter, you cannot make a Bluetooth connection. Disconnect the power adapter and then retry.
Page 185 T here is no sound or sound is intermittently A2 If your head set is a stereo headset, you have interrupted after connecting a headset to check if the headset is connected as a stereo headset. To resolve the problem, complete the procedures below. A1 If your headset is a mono headset, check if a mono headset connection has been ...
Page 186: Hd Dvd
HD DVD Is it compatible with the existing CD/DVD Can I burn a HD DVD disk using a general CD-RW formats? or DVD-RW drive? A All Burning, Playback and Authoring functions are A A general CD-RW or DVD-RW drive does not support supported for the CD/DVD formats. burning the HD DVD format. Can I burn a HD DVD disk using the CyberLink Can I play Blu-Ray titles? DVD Solution? A Since HD-DVD and Blu-Ray disk are different, Blu-...
Page 187: Blu-Ray
Blu-Ray Is it compatible with the existing CD/DVD Can I burn a Blu-Ray disk using a general CD-RW formats? or DVD-RW drive? A All Burning, Playback and Authoring functions are A A general CD-RW or DVD-RW drive does not support supported for the CD/DVD formats. burning the Blu-Ray format. Can I burn a Blu-Ray disk using the CyberLink Can I play an HD-DVD title? DVD Solution (CDS)? A Since HD-DVD and Blu-Ray disk are different, HD- A Although the CyberLink DVD Solution supports...
Page 188: Other
Other 4GB memory is not recognized by Windows The User Controls window appears when correctly. installing or running a program in Windows Vista. A This is due to a limitation in 32bit operating A In this case, click Allow (or OK) to install or run systems that exists in notebook computers of the program. However, if you do not have an other manufacturers. Although the address space administrator account, you have to enter the of the 32bit operating system is 2³²= 4294967296 administrator password in the User Controls window = 4,096MB = 4GB, all of it cannot be allocated and then click Allow (or OK). If no administrator to memory, as some of it needs to be used for password is set you can click Allow (or OK) without other purposes by the operating system. Because entering a password. approximately 1GB of address space needs to be allocated to other system resources such as the BIOS, PCI Device, and VGA for a PC to operate normally. Therefore, even if 4GB of physical memory...
Page 189: Intel Turbo Memory Device (Only For Some Models)
Intel Turbo Memory Device (Only for some models) Intel Turbo Memory is a device that enhances program execution speed, minimizes power consumption and reduces the booting time by optimizing the hard disk drive access. To use the Intel Turbo Memory device, perform the setup as follows. You can only use the Intel Turbo Memory device with Windows Vista. ■ This function is only supported for a specific model. ■ Note Select Start( ) > All Programs > Intel Turbo Memory > Intel Turbo Memory Console. Select the Information tab and check if both Windows ReadyBoost*and Windows ReadyDrive* in the Arguments fields are set to Available. If they are not set to Available, select the Select a cache policy to use option. If the Restart the computer message appears, select Yes and then the computer restarts.
Page 190: Q & A
Q & A What is ReadyBoost? How does Intel Turbo Memory work? A new Windows Vista technology that enhances the program execution speed by using the embedded flash A Intel Turbo Memory enhances memory performance memory. and reduces the power consumption by minimizing the number of hard disk drive read and write What is ReadyDrive? operations through the inter-operation of the installed device driver and the embedded flash memory. A new Windows Vista technology that enhances the booting and drive access of the hard disk drive by using the embedded flash memory. Can I use Intel Turbo Memory in Windows XP? Turning the Intel Turbo Memory device off Unselect the device items in the Select a cache policy Note to use field in Step 2 above and restart the computer...
Page 191: Product Specifications
Caution The system specifications are subject to change without notice. ■ The hard disk drive capacity of a computer in which Samsung Recovery Solution II is installed, is represented as smaller ■ than the product specification.
Page 192 Wireless LAN Specifications (802.11a/b/g, 802.11n Card) Intel 802.11ABG WLAN  The Name of the Registered Equipment : Special Low Power Wireless Device for Wireless Data Communication Systems. Item Detailed Specifications Dimensions 30.0 × 50.95mm (Width X Height) Physical Same as System Operations Operating Specifications Temperature And Temperature: Bet. 0°C and 70°C, Humidity: Less than 85% Humidity Power Power 3.3V Specifications Compatibility IEEE 802.11a, IEEE 802.11b, IEEE 802.11g Operating System Microsoft Windows XP/Vista Network Media Access Protocol CSMA/CA (Collision Avoidance) with Acknowledgement (ACK) Specifications (MAC) Wired Equivalent Privacy support (WEP) 64bit/128bit WPA...
Page 193  Radio Specifications RF Band 2.4GHz, 5GHz Supported Channels Channels allowed per country. Device Transceiver Standard Output Power MAX 10mW 11a mode : OFDM Modulation Scheme 11b mode : DSSS 11g mode : OFDM 11a mode** : 54, 48, 36, 24, 18, 12, 9, 6 Data Rate (Mbps)* 11b mode : 11, 5.5, 2, 1 11g mode*** : 54, 48, 36, 24, 18, 12, 9, 6 Antenna Type Built-in Antenna * The data rate may differ from the real data transmission rate. ** 11a mode is only supported when the device is connected to an IEEE 802.11a device. (e.g. Access Point supporting IEEE 802.11a) *** 11g mode is only supported when the device is connected to an IEEE 802.11g device. (e.g. Access Point supporting IEEE 802.11g)
Page 194 Intel 802.11AGN WLAN  The Name of the Registered Equipment : Special Low Power Wireless Device for Wireless Data Communication Systems. Item Detailed Specifications Dimensions 30.0 × 50.95mm (Width X Height) Physical Operating Specifications Temperature And Temperature: Between 0°C and 70°C, Maximum Humidity: 85% Humidity Power Power 3.3V Specifications Compatibility IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n Operating System Microsoft Windows XP/Vista Network Specifications Media Access CSMA/CA (Collision Avoidance) with Acknowledgement (ACK) Protocol (MAC) Security Wired Equivalent Privacy support (WEP) 64bit/128bit WPA * This device supports the Wireless LAN Security Specifications WPA (Wi-Fi Protected Access) for Wi-Fi. To connect to a WPA wireless network, you have to configure the settings according to the network connection environment. For detailed setting information, ask your network administrator.
Page 195  Radio Specifications RF Band 2.4GHz, 5GHz Supported Channels Channels allowed per country. Device Transceiver Standard Output Power MAX 10mW 11a mode : OFDM 11b mode : DSSS Modulation Scheme 11g mode : OFDM 11n mode : MIMO 11a mode** : 54,48,36,24,18,12,9,6 11b mode : 11, 5.5, 2, 1 Data Rate (Mbps)* 11g mode*** : 54, 48, 36, 24, 18, 12, 9, 6 11n mode**** : 300, 270, 243, 216, 162, 144, 130, 117, 108, 104, 81, 78, 54, 52, 39, 27, 26, 13 Antenna Type Built-in Antenna * The data rate may differ from the real data transmission rate. **11a mode is only supported when it is connected to an IEEE802.11a device (e.g. Access Point supporting IEEE802.11a). *** 11g mode is supported only when you are connected to an IEEE 802.11g device (e.g. An Access Point supporting IEEE 802.11g). **** 11n mode is only supported when it is connected to an IEEE802.11n device (e.g. Access Point supporting IEEE802.11n).
Page 196 Wireless LAN Specifications (802.11BG Card) Intel 802.11BG WLAN  The Name of the Registered Equipment : Special Low Power Wireless Device for Wireless Data Communication Systems. Item Detailed Specifications Dimensions 30.0 × 50.95mm (Width X Height) Physical Same as System Operations Operating Specifications Temperature And Temperature: Bet. 0°C and 70°C, Humidity: Less than 85% Humidity Power Power 3.3V Specifications Compatibility IEEE 802.11b, IEEE 802.11g Operating System Microsoft Windows XP/Vista Network Media Access Protocol CSMA/CA (Collision Avoidance) with Acknowledgement (ACK) Specifications (MAC) Wired Equivalent Privacy support (WEP) 64bit/128bit WPA Security...
Page 197  Radio Specifications RF Band 2.4GHz Supported Channels Channels allowed per country. Device Transceiver Standard Output Power MAX 10mW 11b mode : DSSS Modulation Scheme 11g mode : OFDM 11b mode : 11, 5.5, 2, 1 Data Rate (Mbps)* 11g mode** : 54, 48, 36, 24, 18, 12, 9, 6 Antenna Type Built-in Antenna * The data rate may differ from the real data transmission rate. ** 11g mode is only supported when the device is connected to an IEEE 802.11g device. (e.g. Access Point supporting IEEE 802.11g)
Page 198 Atheros 802.11BG WLAN  The Name of the Registered Equipment : Special Low Power Wireless Device for Wireless Data Communication Systems. Item Detailed Specifications Dimensions 30.0 × 50.95mm (Width X Height) Physical Operating Specifications Temperature And Temperature: Between 0°C and 70°C, Maximum Humidity: 85% Humidity Power Power 3.3V Specifications Compatibility IEEE 802.11b, IEEE 802.11g Operating System Microsoft Windows XP/Vista Network Specifications Media Access Protocol CSMA/CA (Collision Avoidance) with Acknowledgement (ACK) (MAC) Wired Equivalent Privacy support (WEP) 64bit/128bit WPA Security * This device supports the Wireless LAN Security Specifications WPA (Wi-Fi Protected Access) for Wi-Fi. To connect to a WPA wireless network, you have to configure the settings according to the network connection environment. For detailed setting information, ask your network administrator.
Page 199  Radio Specifications RF Band 2.4GHz Supported Channels Channels allowed per country. Device Transceiver Standard Output Power MAX 10mW Modulation Scheme DSSS, OFDM 11b mode : 11, 5.5, 2, 1 Data Rate (Mbps) 11g mode** : 54, 48, 36, 24, 18, 12, 9, 6 Antenna Type Built-in Antenna * The data rate may differ from the real data transmission rate. ** 11g mode is supported only when you are connected to an IEEE 802.11g device (e.g. An Access Point supporting IEEE 802.11g).
Page 200 Registered Trademarks Samsung is a registered trademark of Samsung Co., Ltd. SENS is a registered trademark of Samsung Electronics Co., Ltd. Intel, Pentium/Celeron are registered trademarks of the Intel Corporation. Microsoft, MS-DOS, and Windows are registered trademarks of the Microsoft Corporation. “Memory Stick” and are trademarks of the Sony Corporation. All other product or company names mentioned herein are registered trademarks of their respective companies. Macrovision Certification This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Page 201: Glossary
Glossary The Glossary lists the terminologies used in this User Guide. For terminologies other than these, look in Windows Help. Backup Direct X A way to save the current data to restore it later if An application interface developed to enable Windows necessary. A backup is a way to restore computer data application programs to access hardware devices when the data or computer is damaged. at a very high speed. Since the operating speed of graphics, memory and sound cards must be very fast to provide high quality video and sound for games, Client Direct X enables faster control and interaction between This refers to a computer that uses a shared network applications and hardware devices. By using Direct resource provided by a server. X, the multimedia performance of Windows has been hugely improved. DDR SDRAM (Double Data Rate Synchronous Dynamic Random Access Memory) Driver DRAM is a memory type whose cells consist of a Software that interacts between the hardware and capacitor and transistor manufactured at a low price. the operating system. An operating system knows the SDRAM is a memory type whose performance has hardware information and controls the hardware. In been improved by synchronizing the clock with the general, a driver is supplied with the corresponding external CPU clock. DDR SDRAM is a memory type hardware device. whose performance has been improved by doubling the operating speed of the SDRAM and is widely used DVD (Digital Versatile Disk) nowadays. This computer uses DDR SDRAM. DVD was developed to replace CD (compact disk).
Page 202 Firewall LCD (Liquid Crystal Display) A security system used to protect an internal network or There are Passive Matrix and Active Matrix LCD types. intranet from external networks This computer uses the Active Matrix type LCD called a TFT LCD. Since an LCD is implemented by transistors through an authentication procedure. instead of a cathode-ray tube unlike a CRT, its size can be slim. And because it does not blink, it reduces eye Hibernation Mode strain. A power mode that saves all data in memory to the hard disk and turns the CPU and hard disk off. When Network canceling Hibernation Mode, all application programs A group of computers and devices, such as printers that were running are restored to their last state. and scanners, connected by a communications link. A network can be either small or large and can be Icon connected permanently through cables or temporarily This refers to a small image that represents a file that through telephone lines or wireless links. The biggest users can use. network is the Internet, a worldwide network. LAN (Local Area Network) Notification Area A communications network connecting computers, This refers to the right area of the Taskbar including printers and other devices within a local area such as program icons such as the volume control, the power within a building. A LAN enables all connected devices options and the time. to interact with other devices on the network. The current LAN uses the Ethernet media access control Power Schemes method developed in the early 1980s. To connect to an Ethernet, a network card called a LAN card, Ethernet This refers to a pre-determined power management...
Page 203 Quick Launch Sleep Mode This refers to a toolbar that can be configured so that A power mode that enables computers to save power you can launch a program such as Internet Explorer or consumption when they are not being used. When a display the Windows Desktop with one click. You can computer is in Sleep Mode, the data on the computer add any icon to the quick launch area of the Taskbar memory is not saved to the hard disk. If the power is and launch frequently used program by clicking that tuned off, the data in memory will be lost. icon. System File Server System Files refer to files that are read and used by In general, a server refers to a computer that provides the Windows operating system. In general, system files shared resources for network users. must not be deleted or moved. Share This refers to setting a resource of a computer such as a folder or printer so that other users can also use it. Shared Folder A folder that can be used by other users on the network. Network Administrator A user who plans, configures and manages network operations. Sometimes, a network administrator is called a system administrator.
Page 204 USB (Universal Serial Bus) This refers to a serial interface standard developed to replace the conventional interface standards such as Serial and PS/2. While USB 1.1 supports 12Mbps (12 million bits per second), USB 2.0 supports a data rate that is 40 times (480Mpbs) faster than that of USB 1.1. The data rate of USB 2.0 is equivalent to that of IEEE1394. Therefore USB 2.0 is used for A/V devices supported by IEEE 1394 and a 2nd HDD and CDRW that require a high data rate. Windows Media Player A multimedia program included with Windows. Using this program, you can play a media file, create an audio CD, listen to a radio broadcast, search and manage media files, and copy files to a portable device, etc.
Page 205: Index
Index Battery Samsung Update Plus LCD Brightness Battery Calibration Security Lock Port BIOS Setup Safety Precautions Bluetooth Shortcut Keys Booting Priority SlideShow Memory Status Indicators Modem Connection Multi Card Slot Multimedia CD Drive / Recording Charge Touchpad Click Connecting AP / AP Network Connect / Output Monitor Network Status Diagnosis Control Panel User Accounts / Switch User CyberLink PowerDVD Password Play AVStation Video Play Dual View Playing Music Volume Control Desktop / Change Product Name Product Specifications Program Wired Network Easy Battery Manager...
Page 206: Contact Samsung World Wide
Contact SAMSUNG WORLD WIDE [U.S.A. / U.K.] Contact SAMSUNG WORLD WIDE If you have any comments or questions regarding a Samsung products, contact the SAMSUNG customer care center. Customer Care Center Web Site U.S.A. 1-800-SAMSUNG (726-7864) www.samsung.com/us U.K. 0870-SAMSUNG (726-7864) www.samsung.com/uk [FRANCE] Comment contacter Samsung dans le monde Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service Consommateurs Samsung. Customer Care Center Web Site FRANCE 3260 SAMSUNG (726-7864) www.samsung.com/fr...
Page 207 [RUSSIA / UKRAINE] Customer Care Center Web Site RUSSIA 8-800-555-55-55 www.samsung.ru UKRAINE 8-800-502-0000 www.samsung.ua [CHINA] Customer Care Center Web Site CHINA 800-810-5858 www.samsung.com.cn 010-6475 1880 [HONG KONG] Contact SAMSUNG WORLD WIDE If you have any comments or questions regarding a Samsung products, contact the SAMSUNG customer care center. Customer Care Center Web Site HONG KONG 3698-4698 www.samsung.com/hk Rev.1.6...

This manual is also suitable for:

R700

Samsung R701 User Manual

Quick Links

Chapters

Related Manuals for Samsung R701

Summary of Contents for Samsung R701

This manual is also suitable for: