"Remove the strip cover" on page 65
"Remove the LCD panel" on page 66
"Remove the camera privacy shutter" on page 67
Step 1.
Disconnect the EDP cable from the microphone board and then remove the camera module.
Figure 68. Remove the camera module
Step 2.
Disconnect the camera cable from the microphone board and then separate the camera from the
microphone board.
Figure 69. Separate the camera from the microphone board
Go to
https://support.lenovo.com/partslookup
replacement parts:
Camera
Microphone board
Remove the EDP cable
Make sure the following FRUs (CRUs) have been removed.
"Remove the LCD unit" on page 63
"Remove the strip cover" on page 65
"Remove the LCD panel" on page 66
Step 1.
Disconnect the EDP cable from the microphone board. Peel off the tape and then remove the EDP
cable.
68
Hardware Maintenance Manual
to look up the Lenovo part numbers of the following