Playback; Selecting A Component - Sony STR-DG900 Operating Instructions Manual
Multi channel av receiver
Hide thumbs
Also See for STR-DG900:
- Operating instructions manual (51 pages) ,
- Quick setup manual (2 pages)
Table of Contents
Advertisement
5
Press control button V/v
repeatedly to select "TEST
TONE YES".
The test tone is output from each speaker
in sequence as follows:
Front left t Center t Front right t
Surround right t Surround back right*
t Surround back left* t Surround left
t Sub woofer
*You will only hear the test tone from the
– surround back left and right speakers when
surround back speaker selection is set to
"DUAL".
– surround back left speaker when surround
back speaker selection is set to "SINGLE".
6
Adjust the speaker levels and
balance using the LEVEL menu
so that the level of the test tone
sounds the same from each
speaker.
For details, see "Adjusting the level
(LEVEL menu)" (page 50).
Tips
• To adjust the level of all speakers at the same
time, press MASTER VOL +/–. You can also
use MASTER VOLUME on the receiver.
• The adjusted value are shown on the display
during adjustment.
7
Repeat steps 1 to 5 to select
"TEST TONE NO".
The test tone turns off.
Playback
Selecting a component
VIDEO 1 VIDEO 2
1
TV/SAT MD/TAPE
PHONO
MULTI CH SOURCE
2CH
CATEGORY
SLEEP
1
4
7
– /– –
CLEAR
>10
DISPLAY
B
RETURN/
EXIT
REPLAY ADVANCE
.
TUNING –
m
DISC SKIP
TV VOL
MASTER VOL
MUTING
3
1
Press the input button to select
a component.
You can also use INPUT SELECTOR on
the receiver. To select a component
connected to the MULTI CH IN jack,
press MULTI CH. You can also use
MULTI CH IN/DIRECT on the receiver.
To select a component connected to the
HDMI 1 and HDMI 2 jacks, press HDMI
on the receiver.
SYSTEM STANDBY
VIDEO 3
DVD
SA-CD/CD
TUNER
ZONE 2
A.F.D.
MOVIE
MUSIC
MODE
D. TUNING ON SCREEN
2
3
5
6
8
9
0/10
ENTER
MEMORY
TOOLS
V
B
v
AMP
MENU
– CATEGORY +
<
<
>
TUNING +
H
M
X
x
TV CH
PRESET
continued
39
US
Hide quick links:
Advertisement
Table of Contents
