Table of Contents
Advertisement
Quick Links
LCD4215 Installation Guide
42" LCD Display
Contents:
Table Top Stand Dimensions
Product Description
Type:
Resolution:
Aspect Ratio:
FCC:
Power Consumption:
BTU's:
NOTES:
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not
•
intended to be a step-by step procedure for installation.
Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local
•
building codes. All mounts should make secure contact to wood studs.
4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally
•
to fill the screen using the menus (see "Aspect Modes" in menus and user manual).
Distances are in inches, for millimeters multiply by 25.4.
•
Distances may vary ±5%.
•
Tilt Angle and Rotation
Below are the maximum angles that the monitor can be tilted in the landscape position only.
Landscape 20deg
Max. 20 deg
www.necdisplay.com
LCD Display
1366 x 768
16:9
Class B
160W (max)
545.93 BTU/hour
NEC Display Solutions of America, Inc.
Page 1
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Page 10
Screen Surface:
Dimensions without stand: 40.3"(W) x 24.2"(H) x 5.2"(D)
Dimensions with stand:
Weight without stand:
Weight with stand:
LCD4215
Rev 1.1
Anti-Reflective
40.3" (W) x 25.7" (H) x 13.0" (D)
47.6 lbs
51.6 lbs
Page 1 of 10
Advertisement
Table of Contents
Related Manuals for NEC LCD4215-R
Summary of Contents for NEC LCD4215-R
-
Page 1: Table Of Contents
Tilt Angle and Rotation Below are the maximum angles that the monitor can be tilted in the landscape position only. Landscape 20deg Max. 20 deg www.necdisplay.com NEC Display Solutions of America, Inc. Page 1 Page 1 Page 2 Page 3... -
Page 2: Ventilation Requirements
The ventilation space should not be covered or closed off at the front of the opening. If for some reason the opening needs to be • covered, other means of ventilation will need to be incorporated into the design. Contact NEC for design review and recommendations. -
Page 3: Display Dimensions
NEC Display Solutions of America, Inc. LCD4215 Installation Guide 42” LCD Display Rev 1.1 Display dimensions (PANEL DISPLAY AREA) www.necdisplay.com LCD4215 Page 3 of 10... -
Page 4: Rear & Bottom
NEC Display Solutions of America, Inc. LCD4215 Installation Guide 42” LCD Display Rev 1.1 Display dimensions (cont.) for MOUNT UNIT 100mm MOUNTING HOLE PATTERN 4-M6 Depth 11mm Power Switch Control Panel www.necdisplay.com LCD4215 Page 4 of 10... -
Page 5: New I/O Connections
NEC Display Solutions of America, Inc. LCD4215 Installation Guide 42” LCD Display Rev 1.1 Old I/O Terminal New I/O Terminal www.necdisplay.com LCD4215 Page 5 of 10... -
Page 6: Display Dimensions W/Optional Speakers And Stand
NEC Display Solutions of America, Inc. LCD4215 Installation Guide 42” LCD Display Rev 1.1 Dimensions with optional speakers and stand www.necdisplay.com LCD4215 Page 6 of 10... - Page 7 LCD4215 Installation Guide 42” LCD Display Table Top Stand Dimensions (ST-4020) 3.52 4.94 www.necdisplay.com 3.48 0.83 0.69 13.00 NEC Display Solutions of America, Inc. Table Top Stand ST-4020 0.83 LCD4215 Rev 1.1 Page 7 of 10...
-
Page 8: Optional Speaker Dimensions
LCD4215 Installation Guide 42” LCD Display Optional Speaker Dimensions (SP4020-4620) www.necdisplay.com NEC Display Solutions of America, Inc. Optional Speakers SP4020-4620 0.79 LCD4215 Rev 1.1 INPUT TERMINAL Page 8 of 10... -
Page 9: Optional Wall Mount Dimensions
NEC Display Solutions of America, Inc. LCD4215 Installation Guide 42” LCD Display Rev 1.1 Dimensions with optional Wall Mount Kit (WMK3260-L) www.necdisplay.com LCD4215 Page 9 of 10... -
Page 10: Control Codes
SCREEN MODE: NORMAL FULL WIDE ZOOM AUTO SETUP EXECUTE FILM MODE AUTO NOTE: Contact your NEC rep for codes not listed. NOTE: Use a cross/reverse/null modem cable. Cable Connection Communication Protocol: Interface: RS-232C Communication: Asynchronous Baud Rate: 9600 bps Data Length:...