Circulating-air mode ................5 Additional information on products, accessories, replacement Operating the appliance ............6 parts and services can be found at Lighting ....................6 www.siemens-home.bsh-group.com and in the online shop www.siemens-home.bsh-group.com/eshops Saturation signal .................6 Cleaning and maintenance ............7 : Important safety information Read these instructions carefully.
Page 4
In combination with an activated vapour Hot oil and fat can ignite very quickly. ■ extractor hood, room air is extracted from Never leave hot fat or oil unattended. the kitchen and neighbouring rooms - a Never use water to put out burning oil or partial vacuum is produced if not enough fat.
Causes of damage Caution! Risk of damage due to corrosion. Always switch on the appliance while cooking to avoid condensation. Condensate can produce corrosion damage. Always replace faulty bulbs to prevent the remaining bulbs from overloading. Risk of damage due to ingress of humidity into the electronic circuitry.
Operating the appliance Lighting Note: Switch on the extractor hood when you start cooking and switch it off again several minutes after you have finished The lighting can be switched on and off independently of the cooking. This is the most effective way of removing the kitchen ventilation system.
Cleaning and maintenance Cleaning the metal mesh grease filters Risk of burns! These instructions apply to several appliance variants. It is The appliance will become hot during operation, especially possible that individual features are described which do not near the bulbs. Allow the appliance to cool down before apply to your appliance.
Page 8
Removing metal grease filter Replacing the batteries in the remote control Press the lock on the filter cover. Note: The filter cover is heavy. Grip the filter cover with two hands. Undo screws. Remove cover. Remove the batteries. Open the filter cover downwards. Correctly insert the new batteries (23AE 12 V).
Trouble shooting Malfunctions often have simple explanations. Please read the LED lights following notes before calling the after-sales service. Defective LED lights must only be replaced by the manufacturer, their customer service department or a licensed Risk of electric shock! technician (electrician).