hit counter script
IBM x 340 Series Hardware Maintenance Manual
  1. Manuals
  2. Brands
  3. IBM Manuals
  4. Desktop
  5. x 340 Series
  6. Hardware maintenance manual
IBM x 340 Series Hardware Maintenance Manual

IBM x 340 Series Hardware Maintenance Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Hardware Maintenance Manual
IBM
xSeries 340 Model 6RY

Advertisement

Table of Contents
loading

Related Manuals for IBM x 340 Series

Summary of Contents for IBM x 340 Series

  • Page 1 Hardware Maintenance Manual xSeries 340 Model 6RY...
  • Page 3 Hardware Maintenance Manual xSeries 340 Model 6RY...
  • Page 4 This publication was developed for products and services offered in the United States of America. IBM may not offer the products, services, or features discussed in this document in other countries, and the information is subject to change without notice.

  • Page 5: About This Manual

    This manual contains diagnostic information, a Symptom-to-FRU index, service information, error codes, error messages, and configuration information for the IBM® xSeries 340. Important: This manual is intended for trained servicers who are familiar with IBM PC Server products. Important safety information Be sure to read all caution and danger statements in this book before performing any of the instructions.

  • Page 6: Online Support

    Lea atentamente todas las declaraciones de precaución y peligro ante de llevar a cabo cualquier operación. Online support Use the World Wide Web (WWW) to download Diagnostic, BIOS Flash, and Device Driver files, and documents. The web address is: http://www.ibm.com/pc/support Hardware Maintenance Manual: xSeries 340 Model 6RY...

  • Page 7: Table Of Contents

    Power-on password ......33 Managing your IBM Netfinity server with Netfinity Administrator password ....35 Manager .
  • Page 8 Starting the Netfinity Manager installation program . 78 Automated installation ..... . . 100 Netfinity Manager database support ....83 Customized installation .

  • Page 9: General Checkout

    YES. Schedule maintenance with the customer. Shut down all systems related to the cluster. Run storage test. NO. Go to step 2. IS THE SYSTEM NOT PART OF A CLUSTER? • Power-off the computer and all external devices. © Copyright IBM Corp. 2000...
  • Page 10 • Check all cables and power cords. • Set all display controls to the middle position. • Power-on all external devices. • Power-on the computer. • Record any POST error messages displayed on the screen. If an error is displayed, look up the first error in the“POST error codes” on page 120. •...

  • Page 11: General Information

    270 Watt (115-230 Vac) • Minimum: One • Maximum: Two, second power supply provides redundant power Redundant cooling: • Three hot-swap fans Video: • S3 video controller • Compatible with SVGA and VGA • 8 MB video memory © Copyright IBM Corp. 2000...
  • Page 12 Size (Rack Model) • Height: 13.4 mm (5.25 in.) • Depth: 66.1 mm (26 in.) • Width: 41.5 mm (16.3 in.) • Weight: 22.7 to 29.5 (50 to 65lbs.) depending upon configuration Integrated functions: • Advanced System Management processor • Dual channel Ultra SCSI controller (two internal channels) •...

  • Page 13: Server Features

    Server features The xSeries 340 is designed to be cost-effective, powerful, and flexible. Your server offers: • Impressive performance using an innovative approach to SMP Your server supports up to two Intel Pentium III microprocessors. Your server comes with one microprocessor installed; you can install an additional microprocessor to enhance performance and provide SMP capability.

  • Page 14: Reliability, Availability, And Serviceability Features

    The addition of an optional digital linear tape drive (DLT) allows quick backup of large amounts of data. • IBM ServerGuide CDs The ServerGuide CDs included with your xSeries 340 provide programs to help you set up your server and install the network operating system (NOS). The ServerGuide program detects the hardware options installed, and provides the correct configuration programs and device drivers.

  • Page 15: Controls And Indicators

    CAUTION: The power control button on the device and the power switch on the power supply do not turn off the electrical current supplied to the device. The device also might have more than one power cord. To remove all electrical current from the device, ensure that all power cords are disconnected from the power source.
  • Page 16 Statement 5 CAUTION: The power control button on the device and the power switch on the power supply do not turn off the electrical current supplied to the device. The device also might have more than one power cord. To remove all electrical current from the device, ensure that all power cords are disconnected from the power source.
  • Page 17 • You can turn off the server by pressing the Power Control button on the front of the server. Pressing the Power Control button starts an orderly shutdown of the operating system, if this feature is supported by your operating system, and places the server in standby mode.

  • Page 18: Operator Information Panel

    Operator information panel LINK c 1 d SCSI Hard Disk Drive Activity light c 2 d Ethernet Link Status light c 3 d Ethernet Transmit/Receive Activity light c 4 d Information light c 5 d System Error light SCSI Hard Disk Drive Activity Light: This green light is on when there is activity on a hard disk drive.

  • Page 19: Diagnostics

    AC power source is good and the power supplies can supply +5V dc current to the server. This feature helps you isolate the problem if an error causes the server to shut down. See “Light path diagnostics table” on page 12. © Copyright IBM Corp. 2000...

  • Page 20: Diagnostics Panel

    Diagnostics panel The following illustration shows the LEDs on the diagnostics panel on the system board. See “Light path diagnostics table” for information on identifying problems using these LEDs. OVER TEMP PCI A PCI B DASD1 DASD2 Light path diagnostics table The System Error LED on the operator information panel is lit when certain system errors occur.

  • Page 21: Post Error Messages

    error message, the other error messages usually will not occur the next time you run the test. POST error messages The table,“POST error codes” on page 120, provides information about the POST error messages that can appear during startup. Event/error logs The POST error log contains the three most recent error codes and messages that the system generated during POST.

  • Page 22: Text Messages

    is the three-digit device ID. (These codes are for trained service personnel and are described in the Hardware Maintenance Manual.) date is the date that the diagnostic test was run and the error recorded. is the check digit that is used to verify the validity of the information. text message is the diagnostic message that indicates the reason for the problem.

  • Page 23: Viewing The Test Log

    Notes: If the server stops during testing and you cannot continue, restart the server and try running the diagnostic programs again. b. The keyboard and mouse (pointing device) tests assume that a keyboard and mouse are attached to the server. If you run the diagnostic programs with either no mouse or a USB mouse attached to your server, you will not be able to navigate between test categories using the Next Cat and Prev Cat buttons.

  • Page 24: Recovering Bios

    Use the ServerGuide program to make a BIOS flash diskette. • Download a BIOS flash diskette from the World Wide Web. Go to http://www.pc.ibm.com/support/, select IBM Server Support, and make the selections for your server. • Contact your IBM service representative.

  • Page 25: Ethernet Controller Troubleshooting Chart

    If you set the Ethernet controller to operate at 100 Mbps, you must use Category 5 cabling. If you directly connect two workstations (without a hub), or if you are not using a hub with X ports, use a crossover cable. Note: To determine whether a hub has an X port, check the port label.
  • Page 26 Table 1. Ethernet troubleshooting chart. Ethernet controller problem Suggested Action The server stops running The PCI BIOS interrupt settings are incorrect. when loading device drivers. Check the following: • Determine if the interrupt (IRQ) setting assigned to the Ethernet controller is also assigned to another device in the Configuration/Setup Utility program.

  • Page 27: Ethernet Controller Messages

    Table 1. Ethernet troubleshooting chart. Ethernet controller problem Suggested Action The Ethernet controller Check the following: stopped working when • Make sure that the cable is connected to the Ethernet controller. another adapter was added • Make sure that your PCI system BIOS is current. to the server.
  • Page 28 Explanation: You tried to load another instance of the driver with a different I/O address. This new adapter could not be found. Action: Verify that you installed an IBM Netfinity 10/100 Fault Tolerant Adapter and make sure that the adapter is seated correctly. If the adapter is seated correctly, go to “Starting the diagnostic programs”...
  • Page 29 Table 2. Novell NetWare or IntraNetWare ODI driver messages for the Ethernet controller. PCNTNW-NW-075 The Multiple Link Interface Driver (MLID) cannot be registered with the Link Support Layer (LSL). Explanation: An error occurred while the driver was trying to register with the LSL.

  • Page 30: Network Driver Interface Specification 2.01 (Os/2)

    Table 2. Novell NetWare or IntraNetWare ODI driver messages for the Ethernet controller. PCNTNW-NW-165 The device was not found at IOADDRESS. Explanation: The Ethernet controller cannot be found at the I/O address specified. Action: The Ethernet controller does not require a parameter for the I/O address.

  • Page 31: Ndis 4.0 (Windows Nt) Driver Messages

    Table 3. NDIS 2.01 (OS/2) driver messages for the Ethernet controller. PCNTND-15 Device not found. Explanation: The driver cannot find an Ethernet controller in the server. Action: Verify that the Ethernet controller is enabled. If the Ethernet controller is enabled, go to “Starting the diagnostic programs” on page 14 to run the diagnostic programs.

  • Page 32: Unix Messages

    Table 4. NDIS (Windows NT) driver messages for the Ethernet controller. PermaNet™Server: No Secondary Adapter Found. Grouping Mode is disabled. Explanation: The failover option requires an adapter that is compatible with the device driver of the Ethernet controller on the system board. No such adapter was found. Action: Make sure the correct adapter is installed.
  • Page 33 Explanation: The SunSoft Solaris driver cannot find any more Ethernet controllers. Action: Verify that additional IBM Netfinity 10/100 Fault Tolerant Adapters are present or replace the Ethernet adapter that fails to respond. If the problem persists, run the diagnostic programs.

  • Page 34: Power Checkout

    (see page 130). For specific problems, see“Power error messages” on page 127. Replacing the battery IBM has designed this product with your safety in mind. The lithium battery must be handled correctly to avoid possible danger. If you replace the battery, you must adhere to the following instructions.
  • Page 35 Repair or disassemble Dispose of the battery as required by local ordinances or regulations. Note: In the U.S., call 1-800-IBM-4333 for information about battery disposal. If you replace the original lithium battery with a heavy-metal battery or a battery with heavy-metal components, be aware of the following environmental consideration.

  • Page 36: Temperature Checkout

    b. As you slide it under the battery clip, press the battery down into the socket. Reinstall the server cover and connect the cables. Note: Wait approximately 20 seconds after you plug the power cord of your server into an electrical outlet for the Power Control button to become active.

  • Page 37: Configuring The Server

    ServeRAID adapter installed, you must use the ServeRAID Configuration program to define and configure your disk-array subsystem before you install your operating system. See “Configuring the server”“Chapter 5. Using IBM ServeRAID,” on page 29 for more detailed information. Using the Configuration/Setup Utility program This section provides the instructions needed to start the Configuration/Setup Utility program and descriptions of the menu choices available.

  • Page 38: Choices Available From The Configuration/Setup Main

    Choices available from the Configuration/Setup main menu From the Configuration/Setup Utility main menu, you can select settings that you want to change. The Configuration/Setup Utility main menu is similar to the following: IBM - © IBM Corporation 2000 Configuration/Setup Utility • System Summary •...
  • Page 39 • Devices and I/O Ports Select this choice to view or change the assignments for devices and input/output ports. This choice appears only on the full Configuration/Setup Utility main menu. • Date and Time Select this choice to set the system date and time and to change the system time sent to the Configuration/Setup Utility (service processor) when the server is started.
  • Page 40 — Core Chipset Control Select this choice to modify settings that control features of the core chip set on the system board. Attention: Do not make changes here unless directed to do so by an IBM authorized service representative. — Cache Control Select this choice to enable or disable the microprocessor cache.

  • Page 41: Using Passwords

    – If the on-board SCSI controller is disabled and no other controller and mass storage device are installed, operating system startup cannot occur. – If the video controller is disabled and no video adapter is installed, the server will have no video capability. However, turning the server off and on three times results in a default startup that enables video again.
  • Page 42 the power-on password, you can regain access to the server through one of the following methods: • If an administrator password is set, enter the administrator password at the power-on prompt. Start the Configuration/Setup Utility program and change the power-on password. •...

  • Page 43: Administrator Password

    Note: You can now start the Configuration/Setup utility program and change the power-on password. If you want the server to ask for a password when you turn on the server, set the password override switch back to the OFF position. Administrator password Select this choice to set an administrator password.

  • Page 44: Choices Available From The Scsiselect Menu

    Note: If an administrator password has been set, a prompt appears asking you to enter the password to start the SCSISelect Utility program. When prompted, select either channel A (internal) or channel B (external). Use the arrow keys to select a choice from the menu. •...
  • Page 45 Note: If you press Ctrl+A before the selected drives are ready, an Unexpected SCSI Command Failure screen might appear. Restart the server and watch the SCSISelect messages as each drive spins up. After the drive that you want to view or format spins up, press Ctrl+A. •...
  • Page 46 Hardware Maintenance Manual: xSeries 340 Model 6RY...

  • Page 47: Installing Options

    4 d Filler panel for the power supply bay c 5 d Filler panel for the device bay c 6 d System board c 7 d Terminator Card c 8 d DIMM c 9 d Microprocessor © Copyright IBM Corp. 2000...

  • Page 48: System Board Layout

    c 10 d Air baffle c 11 d Rear fan System board layout The illustrations in the following sections show the components on the system board. System board options connectors The following illustration shows a layout of the system board and identifies system- board connectors for user-installable options.

  • Page 49: System Board Internal Cable Connectors

    System board internal cable connectors The following illustration shows internal cable connectors on the system board. c 1 d Internal SCSI channel A (J29) c 2 d Internal SCSI channel B (J17) c 3 d Fan 3 (J35) c 4 d Main Power (J4) c 5 d Power (J51)

  • Page 50: System Board Switches And Jumpers

    c 1 d Parallel port (J22) c 2 d Video / Advanced System Management Process or port (J13) c 3 d USB ports (J11) c 4 d Ethernet ports (J9) c 5 d Keyboard / mouse port (J6) c 6 d Serial ports (J3) System board switches and jumpers The following illustration identifies the switches and jumpers on the system board.
  • Page 51 c 1 d System board switch block (SW1) c 2 d Boot block jumper (J37) System board jumper blocks Any jumper blocks on the system board that are not shown in the illustration are reserved. For normal operation of the system, no jumpers should be installed on any of the jumper blocks.

  • Page 52: System Board Led Locations

    Table 7. Switches 1-8. Switch number Description Password override. When On, bypass the power-on password. When Off, require the user to enter the power-on password at startup, if one is set. The default setting is Off. Table 8. Microprocessor speed settings. Microprocessor speed Switch 1 Switch 2...

  • Page 53: Before You Begin

    c 11 d DIMM4 failure (CR20) Table 9. Diagnostics panel LEDs. Description Power supply 1 failure. Power supply 2 failure. Not used. Non-redundant power. OVER Overspecification. The system has exceeded the power capibilities of the installed power supply units. Non-maskable-interrupt occurred. TEMP System temperature exceeded maximum rating.

  • Page 54: Working Inside A Server With Power On

    • Each of the drive bays has either a drive or a filler panel installed. • Each of the power supply bays has either a power supply or a filler panel installed. • The cover is in place during normal operation. •...

  • Page 55: Removing The Cover And Bezel

    Removing the cover and bezel c 1 d Cover c 2 d Cover release latch c 3 d Flanges To remove the server top cover: Review the information in “Before you begin” on page 45. If you are planning to install or remove any part other than a hot-swap hard disk drive, hot-swap power supply, or hot-swap fan, turn off the server and all attached devices and disconnect all external cables and power cords.

  • Page 56: Adapter Considerations

    c 1 d PCI slot 5 64-bit (J44) c 2 d PCI slot 4 64-bit (J39) c 3 d PCI slot 3 64-bit (J34) c 4 d PCI slot 2 32-bit (J32) c 5 d PCI slot 1 32-bit (J27) Adapter considerations Before you continue with the adapter-installation procedure: •...

  • Page 57: Adapter Installation Instructions

    You can use the Configuration/Setup Utility program to change the boot precedence for your server. Select Start Options from the Configuration/Setup Utility program. Adapter installation instructions c 1 d Adapter c 2 d Expansion-slot cover The following illustration shows the rerouting of the SCSI cable if you install a ServerRAID adapter.

  • Page 58: Installing Internal Drives

    Remove the expansion-slot cover: Loosen and remove the screw on the top of the expansion-slot cover. b. Slide the expansion-slot cover out of the server. Store it in a safe place for future use. Attention: Expansion-slot covers must be installed on the openings for all vacant slots.

  • Page 59: Internal Drive Bays

    faulty and needs to be replaced. When the hard-disk status light indicates a drive fault, you can replace that hot-swap drive without turning off the server. Each hot-swap drive that you plan to install must have a hot-swap-drive tray attached. The drive must have a single connector attachment (SCA) connector. Hot- swap-drive trays come with the hot-swap drives.

  • Page 60: Scsi Ids

    Notes: Any information about SCSI drives also applies to other SCSI devices, such as tape drives. If you plan to install both internal and external SCSI devices, you must follow the instructions in “Connecting external options” on page 61, in addition to the instructions in this section.

  • Page 61: Installing A Non-Hot-Swap Drive

    c 1 d Filler panel c 2 d Drive-tray assembly c 3 d Drive handle To install a drive in a hot-swap drive bay: Review the information in “Before you begin” on page 45. Attention: To maintain proper system cooling, do not operate the server for more than two minutes without either a drive or a filler panel installed for each bay.
  • Page 62 c 1 d Slide rails c 2 d Filler panel c 3 d Slide rail c 4 d Drive c 5 d Slide rail To install a non-hot-swap drive: Review the information in“Before you begin” on page 45. Turn off the server and peripheral devices and then remove the cover. (See “Removing the cover and bezel”...

  • Page 63: Installing A Microprocessor

    (BIOS). The latest level of BIOS for your server is available through the World Wide Web and the IBM Bulletin Board System (BBS). The latest level of BIOS for your server is available through the World Wide Web Obtain an SMP-capable operating system (optional).
  • Page 64 Attention: To avoid damage and ensure proper server operation when you install a new or an additional microprocessor, use microprocessors that have the same cache size and type, and the same clock speed. Microprocessor internal and external clock frequencies must be identical. c 1 d Air baffle c 1 d...

  • Page 65: Installing A Hot-Swap Power Supply

    Turn off the server and peripheral devices and disconnect all external cables and power cords; then remove the cover (see “Removing the cover and bezel” on page 47). Remove the air baffle by grasping it at the sides and lifting it from the server. Remove the terminator card from the microprocessor connector.
  • Page 66 Statement 8 CAUTION: Never remove the cover on a power supply or any part that has the following label attached. Hazardous voltage, current, and energy levels are present inside any component that has this label attached. There are no serviceable parts inside these components.

  • Page 67: Replacing A Hot-Swap Fan Assembly

    c 1 d Filler panel c 2 d Power supply c 3 d Handle c 4 d AC Power light c 5 d DC Power light To install a power supply: Remove the filler panel from the empty power supply bay by inserting your finger into the depression on the filler panel and pulling it away from the server.

  • Page 68: Installing The Server Cover And Bezel

    c 5 d Fan 2 To replace a hot-swap fan assembly: Remove the cover. See “Removing the cover and bezel” on page 47. Attention: To ensure proper system cooling, do not remove the top cover for more than 30 minutes during this procedure. The LED on the failing fan assembly will be lit.

  • Page 69: Connecting External Options

    If you install a SCSI adapter, you can attach a SCSI storage expansion enclosure to your server. Cabling requirements To select and order the correct cables for use with external devices, contact your IBM reseller or IBM marketing representative. For information about the maximum length of SCSI cable between the terminated ends of the cable, see ANSI SCSI Standards: •...

  • Page 70: Parallel Port

    c 1 d Mouse c 2 d Management port C c 3 d Advanced System Management Interconnect knockout c 4 d Parallel c 5 d Video c 6 d Universal serial bus (USB) 1 and 2 c 7 d Ethernet c 8 d Keyboard c 9 d...

  • Page 71: Parallel Port Connector

    Parallel port connector The following table shows the pin-number assignments for the 25-pin, female D-shell parallel-port connector on the rear of your server. Table 11. Parallel-port connector pin-number assignments. SPP/ECP Signal EPP Signal -STROBE -WRITE Data 0 Data 0 Data 1 Data 1 Data 2 Data 2...

  • Page 72: Keyboard Port

    Note: If you install a PCI video adapter, the server BIOS will automatically disable the integrated video adapter. The following table shows the pin-number assignments for the 15-pin analog video connector on the rear of your server. Table 12. Video-port connector pin-number assignments. Signal Signal Signal...

  • Page 73: Auxiliary-Device (Pointing Device) Port

    RAID adapter. SCSI cabling requirements If you plan to attach external SCSI devices, you must order additional SCSI cables. To select and order the correct cables for use with external devices, contact your IBM reseller or IBM marketing representative. Installing options...

  • Page 74: Setting Scsi Ids

    For information about the maximum length of SCSI cable between the terminated ends of the cable, refer to the ANSI SCSI standards. Adhering to these standards will help ensure that your server operates properly. Setting SCSI IDs Each SCSI device connected to a SCSI controller must have a unique SCSI ID. This ID enables the SCSI controller to identify the device and ensure that different devices on the same SCSI channel do not attempt to transfer data simultaneously.

  • Page 75: Serial Ports

    Table 15. 68-pin SCSI connector pin-number assignments. Signal Signal Reserved Reserved Ground Ground +Attention -Attention Ground Ground +Busy -Busy +Acknowledge -Acknowledge +Reset -Reset +Message -Message +Select -Select +Control/Data -Control/Data +Request -Request +Input/Output -Input/Output +Data 8 -Data 8 +Data 9 -Data9 +Data 10 -Data 10 +Data 11...

  • Page 76: Serial-Port Connectors

    Serial-port connectors The following table shows the pin-number assignments for the 9-pin, male D-shell serial-port connectors on the rear of your server. These pin-number assignments conform to the industry standard. Table 16. Serial-port connectors pin-number assignments. Signal Signal Data carrier detect Data set ready Receive data Request to send...

  • Page 77: Ethernet Port

    ServerGuide CDs. Failover for redundant Ethernet The IBM Netfinity 10/100 Fault Tolerant Adapter is an optional redundant network interface card (NIC adapter) that you can install in your server. If you install this NIC adapter and connect it to the same logical segment as the primary Ethernet controller, you can configure the server to support a failover function.
  • Page 78 The failover function is now enabled. Windows NT Server: IBM offers hot-plug support for Windows NT Server Version 4.0. Failover can work in conjunction with hot-plug support or independently. If you are not using hot-plug support, go to “Windows NT Server failover setup” on page 71.
  • Page 79 Enter the brand type of Server, click on Downloadable files and look for Hot Plug. The IBM Netfinity Hot Plug PCI for Windows NT Server 4.0 package uses the Intel Desktop Management Interface (DMI) to control hot-plug support for the Ethernet controllers.
  • Page 80 Two options are available for recovering from a failover condition. The options are determined by the Enable for DMI / Hot Swap Support checkbox. If the IBM Netfinity Hot Plug PCI for Windows NT Server 4.0 package is installed, this checkbox will appear at the bottom of the Adapter Properties panel.

  • Page 81: Ethernet Port Connector

    automatically switch back to the primary adapter when the primary adapter comes back online. In this case, issue the command: LOAD d:\path\PCNTNW SCAN where d and path are the drive and path where the driver is located. This command causes the device driver to locate the primary adapter and switch the Ethernet traffic to it.
  • Page 82 c 1 d Power supply 1 power cord connector c 2 d Serial A c 3 d Mouse c 4 d Universal serial bus (USB) 1 and 2 c 5 d Management port C c 6 d Parallel c 7 d Video c 8 d Ethernet...

  • Page 83: Netfinity Manager

    Web, you can access your Netfinity Manager systems from anywhere in the world. Managing your IBM Netfinity server with Netfinity Manager The copy of Netfinity Manager that is included with ServerGuide entitles you to one Netfinity Manager installation. You are also entitled to additional installations of Client Services for Netfinity Manager.

  • Page 84: Netfinity Manager System Requirements

    • A LAN adapter card and one or more of the following communications protocols: — IBM TCP/IP for OS/2 version 1.2 or later (required for Netfinity Manager with Web Enhancement) — NetBIOS Note: The Netfinity Manager NetBIOS requirements are three names, two sessions, and nine network control blocks (NCBs).

  • Page 85: Netfinity Manager For Windows Nt System

    • A LAN adapter card and one or more of the following communications protocols: — TCP/IP (must be WinSock Version 1.1-compatible; required for Netfinity Manager with Web Enhancement) — NetBIOS Note: The Netfinity Manager NetBIOS requirements are three names, two sessions, and nine network control blocks (NCBs).

  • Page 86: Starting The Netfinity Manager Installation Program

    Type SCOS2 and then press Enter. The ServerGuide Netfinity Applications windows opens. Select IBM Netfinity Manager from the Available Applications selection list. Note: To install Client Services for Netfinity Manager, select Client Services for Netfinity Manager from the Available Applications list and then refer to the Client Services for Netfinity Manager User’s...
  • Page 87 Select IBM Netfinity Manager from the Available Applications selection list. Note: To install Client Services for Netfinity Manager, select Client Services for Netfinity Manager from the Available Applications list and then refer to the Client Services for Netfinity Manager User’s Guide for additional installation instructions.
  • Page 88 IBM selection server. • World Wide Web Enhancement (TCP/IP Required) Click World Wide Web Enhancement (TCP/IP Required) if the Netfinity Manager is being installed on a system that will be used to manage other Netfinity Manager systems, and can be accessed and controlled remotely over the Internet using a World Wide Web browser.
  • Page 89 DMI Service Layer, ECC Memory, a System Partition, a RAID adapter, or a PFA-enabled disk drive. This enables a network administrator to remotely access these services on other systems within a network. However, the installation program installs the base program that enables local use of the service only if the required hardware or system configuration is present.
  • Page 90 8.24.67.32) to communicate with remote systems and will not attempt to resolve the numeric address into an alphanumeric, Domain Name Server (DNS) address (for example, your.system.ibm.com). Select this option if you are using Netfinity Manager is a WINS networking environment or if you are using TCP/IP in an environment that does not have a Domain Name Server.

  • Page 91: Netfinity Manager Database Support

    g. Save the configuration and continue. Click Save to save the configuration. Then, click Exit to continue. Note: The configuration can be changed later by double-clicking the Network Driver Configuration object in the Netfinity Manager folder. 10. After finishing configuring the system for network access, the installation program displays a list of changes that must be made to the system configuration files, and asks whether the installation program should make the changes.

  • Page 92: Db2 Database Support

    DB2 database support Support for DB2 database export is automatically configured during installation of the Netfinity Manager. However, the database system itself must be configured. Instructions for configuring the database follow. A raw data dump to a file is also available and will run without a database. System requirements Netfinity Manager DB2 database export is supported on systems running Netfinity Manager for OS/2, Netfinity Manager for Windows 95, Netfinity Manager for...

  • Page 93: Activating The Database

    where databasename is the name of the database and d is the drive where the database will be located. Note: If any part of the database already exists, the utility program will create only the portions of the database that are missing. Press Enter.
  • Page 94 — ALL — ALL PRIVILEGES Note: Grants all the appropriate privileges, except CONTROL, on the database. — ALTER — CONTROL — DELETE — INDEX — INSERT — REFERENCES — SELECT — UPDATE • tablename is the name of the table as specified during database installation. A listing of the Netfinity database table names can be found in the Netfinity User’s Guide (Appendix H: Netfinity Relational Database Tables).

  • Page 95: Deleting The Database

    NETFINDB GRANT /ID=id PUBLIC /DBNAME=databasename /PRIV=privilegecode where • id is the user ID to be granted access • databasename is the name of the database as specified during NETFINDB execution • privilegecode is one of the following privilege codes: — ALL —...

  • Page 96: Lotus Notes Database Support

    Make the CD-ROM drive the active drive. Type E: and press Enter. Type the following command at the OS/2 prompt: NETFINDB DELETE /DBNAME=databasename where databasename is the name of the database as specified during NETFINDB execution. Press Enter. To configure Netfinity Manager to discontinue export data through ODBC for use on DB2, refer to “ODBC database support”...

  • Page 97: Browsing The Netfinity Manager Lotus Notes

    Note: When installing the database on a remote server, select the name of the remote server from the Servers list. Type in the Filename field: NETFINDB.NSF Type in the Title field: Netfinity Database Click New to create the database and close the New Database window. 10.

  • Page 98: Odbc Database Support

    — Microsoft SQL Server (using the Visigenic driver provided with Microsoft SQL Server) — IBM DB2 For detailed information about supported ODBC platforms, see Table 19 on page Note: The ODBC database name must not be longer than 8 characters.

  • Page 99: Creating The Netfinity Manager Tables

    In Windows NT, when exporting to MS SQL, NETFIN must be the owner of the database or be given table create rights. Create the database with the appropriate relationship with the NETFIN ID. Make a database ODBC source either using the ODBC tools shipped with the operating system or the database.

  • Page 100: Supported And Certified Databases

    Win 95 Win NT 3.51 Win NT 4.0 OS/2 Warp Connect OS/2 Warp 4.0 IBM DB2 Version 2.1.2 Yes IBM DB2 Universal Database 5.0 ODBC - IBM DB2 Yes, DB2 Driver Yes, DB2 Driver Yes, DB2 Driver Yes, DB2 Driver Yes, DB2 Driver Version 2.1.2...

  • Page 101: Starting Netfinity Manager

    Table 19. Supported Netfinity Databases.. Reference by operating system and database client version. Product Win 95 Win NT 3.51 Win NT 4.0 OS/2 Warp Connect OS/2 Warp 4.0 Lotus Notes Version 4.63 Oracle Version 7.3 Yes, Oracle Yes, Oracle Yes, Oracle Driver Version Driver Version Driver Version...

  • Page 102: Netfinity Manager Service Descriptions

    Advanced System Management The Advanced System Management service provides extensive functionality available for your IBM PC Server Advanced System Management Adapter, Netfinity Advanced System Management PCI Adapter, or Netfinity Advanced System Management Processor. With the Advanced System Management service, you can configure system management events (such as POST, loader, and operating system time-outs or critical temperature, voltage, and tamper alerts).

  • Page 103: Alert On Lan Configuration

    of the alert, the ID of the application that generated the alert, as well as any text that was generated and any action taken by the Alert Manager. Individual or multiple alerts can be selected from the log and printed for later reference, or deleted once problems are corrected.

  • Page 104: File Transfer

    File Transfer Use the File Transfer service to easily send, receive, or delete files or entire directories to and from remote Netfinity Manager systems on the network. Power-On Error Detect The Power-On Error Detect service can warn you immediately when a remote Netfinity Manager system has start-up problems, enabling you to react quickly to problems and minimize downtime.

  • Page 105: Remote Workstation Control

    Remote Workstation Control Remote Workstation Control can monitor or control the screen display of a remote system that is running Netfinity Manager (or Client Services for Netfinity Manager). Once you initiate a Remote Workstation Control session with another Netfinity Manager system, you can passively monitor events that are occurring on the display of the remote system or actively control the remote system desktop.

  • Page 106: System Information Tool

    System Information Tool gathers information about almost any computer; however, the most detail is provided when this service is used with IBM computers. This service is available for both stand-alone and network use.

  • Page 107: Delaying Netfinity Manager Startup On Os/2 Systems

    the Netfinity Manager Web server functions. Delaying Netfinity Manager startup on OS/2 systems In some cases, it might be necessary for you to delay the automatic startup of the Netfinity Manager Network Interface (NETFBASE.EXE) in order to allow other time- sensitive applications to start up correctly or to allow your system to fully configure itself prior to beginning network operations.

  • Page 108: Installation Options

    If the system has a CID-enabled (CID stands for customization, installation, and distribution) software distribution manager utility (such as LAN CID, included with IBM Network Transport Services/2), Netfinity Manager can be installed on systems within the network by using the Netfinity Manager installation program command line parameters and response file.

  • Page 109: Customized Installation

    Copy the files from the appropriate Client Services for Netfinity Manager directories. For example, when creating a source directory to distribute Netfinity Manager for OS/2, copy all of the files from the OS2/SERVICES directory into the source directory. Copy the files from the appropriate Netfinity Manager directory. For example, when creating a source directory to distribute Netfinity Manager for OS/2, copy all of the files from the OS2/MANAGER directory into the source directory.
  • Page 110 The second line is a list of the options in the third section that will be installed when this choice is selected for installation. For example: ;IBM SysMgt Install Script, Version 2 (Do not remove this comment line) Netfinity Manager Installation [Manager 16900] Advanced System Management Support [ServProc 450]...
  • Page 111 Option Name An identifying comment by the installation program. All options must have a different Option Name. This is used only for identification. Dll-entrypoint Used to determine whether an option is valid for a given target machine. In most cases, it should be the reserved string "NULL." The easiest way to customize an installation is to simply put a semicolon in front of any service that you want to remove from the installation.
  • Page 112 Hardware Maintenance Manual: xSeries 340 Model 6RY...

  • Page 113: Fru Information (Service Only)

    Remove the cover. See “Removing the cover and bezel” on page 47. From the back of the cover, release the four tabs c 1 d and gently pry away the LED cover c 2 d . © Copyright IBM Corp. 2000...

  • Page 114: Removing The On/Off Reset Board

    Removing the on/off reset board c 1 d On/Off Reset Board c 2 d Screw To remove the on/off reset board: Remove the cover. See “Removing the cover and bezel” on page 47. Disconnect the cables from the system board. Remove the screw c 2 d .

  • Page 115: Removing The Led Board

    Removing the LED board c 1 d LED board c 2 d Screws(2) To remove the LED board: Remove the cover. See “Removing the cover and bezel” on page 47. Disconnect the LED board cable from the system board . Remove the two screws c 2 d .

  • Page 116: Removing The Hot-Swap Hard Disk Drive Backplane

    Removing the hot-swap hard disk drive backplane c 1 d Backplane bracket c 2 d Backplane board c 3 d Screws (4) To remove the hot-swap hard disk drive backplane: Remove the cover. See “Removing the cover and bezel” on page 47. Pull out the hard drives in order to disconnect them from the backplane.

  • Page 117: Removing The Power Supply Backplane

    Removing the power supply backplane c 1 d Backplane c 2 d Insulator c 3 d Screws (2) c 4 d Plastic retainer To remove the power supply backplane: Remove the cover. See “Removing the cover and bezel” on page 47. Remove power supplies from the backplane c 1 d .

  • Page 118: Removing The System Board

    c 4 d Chassis slot c 5 d Cable receptacle To remove the AC distribution box: Remove the cover. See “Removing the cover and bezel” on page 47. Remove screw c 1 d . Pull the AC distribution box c 2 d toward front of machine in order to release it from the chassis clips c 3 d .

  • Page 119: Symptom-To-Fru Index

    1-2-3(DMA page register write/read System Board failed) 1-2-4 (RAM refresh verification DIMM failed) System Board 1-3-1 (1st 64K RAM test failed) DIMM 1-3-2 (1st 64K RAM parity test DIMM failed) System Board 2-1-1(Secondary DMA register System Board failed) © Copyright IBM Corp. 2000...
  • Page 120 Beep/Symptom FRU/Action 2-1-2(Primary DMA register failed) System Board 2-1-3(Primary interrupt mask System Board register failed) 2-1-4(Secondary interrupt mask System Board register failed) 2-2-2 (Keyboard controller failed) System Board Keyboard 2-2-3 (CMOS power failure and Battery checksum checks failed) System Board 2-2-4(CMOS configuration Battery information validation failed)

  • Page 121: No Beep Symptoms

    Beep/Symptom FRU/Action 3-3-3 (No operational Install or reseat the memory modules, then do a 3 boot reset. (See “Using memory in system) the Configuration/Setup Utility program” on page 29.) DIMMs Memory Board System Board Two Short Beeps(Information only, Run Diagnostics the configuration has changed) Run Configuration/Setup Three Short Beeps...

  • Page 122: Information Panel System Error Led

    Information panel system error LED The system error LED is turned on when an error is detected. If the system error LED is on, remove the cover and check the diagnostic panel LEDs. The following is a complete list of diagnostic panel LEDs followed by the FRU/Action for correcting the problem.

  • Page 123: Diagnostic Error Codes

    Diagnostic Panel LED FRU/Action PCI C LED on Remove all PCI adapters from slots 1-5. System Board. PS1 LED on Check the DC Good LED on power supply 1. If off, replace power supply Power Backplane. PS2 LED on Check the DC Good LED on power supply 2. If off, replace power supply Power Backplane.
  • Page 124 Error Code/Symptom FRU/Action 011-XXX-000 (Failed COM1 Serial System Board Port test) 011-XXX-001 (Failed COM2 Serial System Board Port test) 014-XXX-000 (Failed Parallel Port System Board test) 015-XXX-001 (USB interface not found, System Board board damaged) 015-XXX-015 (Failed USB external loopback System Board test) Make sure parrallel port is not disabled.
  • Page 125 Error Code/Symptom FRU/Action 089-XXX-002 (Failed VRM 2 for Optional Microprocessor 2 Optional Microprocessor test) Optional Microprocessor 2 165-XXX-000 (Failed Service Processor System Board. Before replacing the System Board, ensure that test) System Board jumper J45 is not installed (the default) when the error occurs.
  • Page 126 Error Code/Symptom FRU/Action 217-XXX-000 (Failed BIOS Fixed Fixed Disk 1 Disk test) If RAID is configured, the fixed Note: disk number refers to the RAID logical array (Failed BIOS Fixed Disk 217-XXX-001 Fixed Disk 2 test) Note: If RAID is configured, the fixed disk number refers to the RAID logical array 217-XXX-002...

  • Page 127: Error Symptoms

    Run Diskette Drive Diagnostics Cable Diskette Drive System Board Monitor problems (general). Some IBM Monitor monitors have their own self-tests. If you Run Video Diagnostics. If diagnostics pass, the problem may be a suspect a problem with the monitor, refer to video driver.

  • Page 128: Post Error Codes

    • Power Supply • Power Backplane • System Board (with pins 2 and 3 on J23 extension cable connected together to bypass the power switch; see “System board switches and jumpers” on page 42). AC Good LED DC Good LED Description FRU/Action No power to system or ac...
  • Page 129 Error Code/Symptom FRU/Action (Internal cache error) Processor Optional Processor (if installed) (Real time clock error) Run Diagnostics Battery System Board (Real time clock battery error) Run Configuration/Setup Battery System Board (Device Configuration Error) Run Configuration/Setup Note: Be sure to load the default settings Battery and any additional desired Failing Device...
  • Page 130 Error Code/Symptom FRU/Action (Cache error) Processor Optional Processor (if installed) (DRAM parity configuration Run configuration / setsup error) Battery System Board (DIMM has been disabled the user Run Configuration/Setup, if disabled by user or system, see "Memory Settings" on page Disabled DIMM, if not disabled by user.
  • Page 131 Error Code/Symptom FRU/Action 1301 C cable to front panel not Cable found) Front Panel Power Switch Assembly System Board 1302 C cable from system board Cable to power on and reset switches not found) Power Switch Assembly System Board 1303 C cable from system board Cable to power backplane not found)
  • Page 132 Error Code/Symptom FRU/Action 1800 (No more hardware interrupt Run Configuration/Setup available for PCI adapter) Failing Adapter System Board 1962 (Drive does not contain a valid Verify a bootable operating system is installed. boot sector) Run Diagnostics Hard Disk Drive SCSI Backplane Cable System Board 2400...
  • Page 133 Error Code/Symptom FRU/Action 00180400 (No more memory (below Run Configuration/Setup 1MB for PCI adapter) Move the failing adapter to slot 1 or 2 Failing Adapter System Board 00180500 (PCI option ROM Remove Failing PCI Card checksum error) System Board 00180600 (PCI to PCI bridge error) Run Configuration/Setup Move the failing adapter to slot 1 or 2...

  • Page 134: Scsi Error Codes

    SCSI error codes Error Code FRU/Action All SCSI Errors One or more of External SCSI devices must be powered-on before you power-on the following might be causing the problem: the server. • A failing SCSI device (adapter, drive, The cables for all external SCSI devices are connected correctly. controller) If you have attached an external SCSI device to the server, make •...

  • Page 135: Fan Error Messages

    Message Action System under recommended CPU "X" Ambient temperature must be within normal operating temperature (level-warning; system specifications; see “Features and specifications” on page 3. reporting under temperature condition for CPU "X") Fan error messages Message Action (level-critical; fan "X" Fan "X"...

  • Page 136: System Shutdown

    Message Action System under recommended voltage for "X" Check connections to power subsystem (level-warning; indicated Replace power supply voltage supply under nominal value; value Replace power backplane for "X" can be +12, -12, or +5) System under recommended voltage on 3.3 Check connections to power subsystem (level-warning;...

  • Page 137: Temperature Related System Shutdown

    Message Action System shutoff due to VRM "X" over Replace power supply voltage Replace power supply backplane Temperature related system shutdown Message Action System shutoff due to board over Ensure system is being properly cooled, see “Temperature temperature (level-critical; board checkout”...

  • Page 138: Bus Fault Messages

    Remove or disconnect the following (one at a time) until you find the failure (power-on the computer and reconfigure each time). Any external devices Surge suppressor device (on the computer) Modem, printer, mouse, or non-IBM devices Each adapter Drives Memory-Modules (Minimum requirement = 128 MB (4x128 MB DIMMs))
  • Page 139 Notes: If the problem goes away when you remove an adapter from the system, and replacing that adapter does not correct the problem, suspect the System Board. If you suspect a networking problem and all the system tests pass, suspect a network cabling problem external to the system.
  • Page 140 Hardware Maintenance Manual: xSeries 340 Model 6RY...

  • Page 141: Parts Listing (Xseries 340)

    19K0611 Panel, Power Supply Filler (All Models) 37L0331 Power Supply with Mounting, 270 WF (All Models) 37L0311 Front Bezel, 18mm (All Models) 37L0331 12.7MM Diskette Drive (All Models) 36L8645 24X CDROM (Primary) (All Models) 09N0883 © Copyright IBM Corp. 2000...
  • Page 142 Index System Part (Model No.) FRU No. Blank 5.25 Hard DIsk Drive Bezel (Snap Mount) (All Models) 00N6407 Card Assembly, Front Switch Card (All Models) 00N7213 Frame Assembly, (Chassis Weldment) (All Models) 37L0303 System Board Assembly with Tray (All Models) 09N7812 Processor Terminator Card (All Models) 37L5949...

  • Page 143: Keyboards

    Index System Part (Model No.) FRU No. Cable, Signal - SCSI Single Ended - Planar to Media (All Models) 00N7187 Cable, Power - Signal - Power Backplane to IO Planar 2X10 (All Models) 03K9346 Cable, Signal - Planar to Floppy Drive (Flex Cable) (All Models) 37L0346 Cable, Signal LVD-SCSI - Planar to SCSI Backplane (All Models) 37L0350...

  • Page 144: Power Cords

    Keyboard FRU No. Spanish 37L2576 Swedish/Finn 37L2577 Swiss, F/G 37L2578 Turkish 37L2579 Turkish 37L2580 UK English 37L2581 Yugosl/Lat 37L2582 US English-EMEA 37L2583 Chinese/US 37L2585 Thailand 37L2587 French Canadian 37L0913 Power cords Power cord FRU No. China (PRC) 01K9851 Japan 01K9853 Thailand 12J5120 Israel...

  • Page 145: Related Service Information

    Safety information The following section contains the safety information that you need to be familiar with before servicing an IBM mobile computer. General safety Follow these rules to ensure general safety: •...

  • Page 146: Electrical Safety

    • Reinstall all covers correctly before returning the machine to the customer. Electrical safety CAUTION: Electrical current from power, telephone, and communication cables can be hazardous. To avoid personal injury or equipment damage, disconnect the attached power cords, telecommunication systems, networks, and modems before you open the server covers, unless instructed otherwise in the installation and configuration procedures.

  • Page 147: Safety Inspection Guide

    This guide addresses only those items. However, good judgment should be used to identify potential safety hazards due to attachment of non-IBM features or options not covered by this inspection guide.

  • Page 148: Handling Electrostatic Discharge-Sensitive Devices

    Insulation must not be frayed or worn. Remove the cover. Check for any obvious non-IBM alterations. Use good judgment as to the safety of any non-IBM alterations. Check inside the unit for any obvious unsafe conditions, such as metal filings, contamination, water or other liquids, or signs of fire or smoke damage.

  • Page 149: Grounding Requirements

    Grounding requirements Electrical grounding of the computer is required for operator safety and correct system function. Proper grounding of the electrical outlet can be verified by a certified electrician. Safety notices (multi-lingual translations) The caution and danger safety notices in this section are provided in the following languages: •...
  • Page 150 Statement 2 CAUTION: When replacing the lithium battery, use only IBM Part Number 33F8354 or an equivalent type battery recommended by the manufacturer. If your system has a module containing a lithium battery, replace it only with the same module type made by the same manufacturer.
  • Page 151 DANGER Some laser products contain an embedded Class 3A or Class 3B laser diode. Note the following: Laser radiation when open. Do not stare into the beam, do not view directly with optical instruments, and avoid direct exposure to the beam. •...
  • Page 152 • Statement 10 CAUTION: Do not place any object weighing more than 82 kg (180 lbs.) on top of rack-mounted devices. Hardware Maintenance Manual: xSeries 340 Model 6RY...
  • Page 153 Importante: Todas as instruções de cuidado e perigo da Server Library começam com um número. Este número é utilizado para fazer referência cruzada de uma instrução de cuidado ou perigo no idioma inglês com as versões traduzidas das instruções de cuidado ou perigo encontradas nesta seção.
  • Page 154 Aqueça a mais de 100°C (212°F) • Conserte nem desmonte Para descartar a bateria, entre em contato com a área de atendimento a clientes IBM, pelo telefone (011) 889-8986, para obter informações sobre como enviar a bateria pelo correio para a IBM.
  • Page 155 • A utilização de controles ou ajustes ou a execução de procedimentos diferentes dos especificados aqui pode resultar em exposição prejudicial à radiação. PERIGO Alguns produtos a laser contêm um diodo laser da Classe 3A ou Classe 3B embutido. Observe o seguinte: Radiação de laser quando aberto.
  • Page 156 CUIDADO: Instrução 10 CUIDADO: Não coloque nenhum objeto com peso superior a 82 kg (180 lbs.) sobre dispositivos montados em rack. Hardware Maintenance Manual: xSeries 340 Model 6RY...
  • Page 157 Related service information...
  • Page 158 Hardware Maintenance Manual: xSeries 340 Model 6RY...
  • Page 159 Related service information...
  • Page 160 Hardware Maintenance Manual: xSeries 340 Model 6RY...
  • Page 161 Related service information...
  • Page 162 Hardware Maintenance Manual: xSeries 340 Model 6RY...
  • Page 163 Related service information...
  • Page 164 Hardware Maintenance Manual: xSeries 340 Model 6RY...
  • Page 165 Important: Toutes les consignes Attention et Danger indiquées dans la bibliothèque Server sont précédées d'un numéro. Ce dernier permet de mettre en correspondance la consigne en anglais avec ses versions traduites dans la présente section. Par exemple, si une consigne de type Attention est précédée du chiffre 1, ses traductions sont également précédées du chiffre 1 dans la présente section.
  • Page 166 ATTENTION: Remplacez la pile au lithium usagée par une pile de référence identique exclusivement - voir la référence IBM - ou par une pile équivalente recommandée par le fabricant. Si votre système est doté d'un module contenant une pile au lithium, vous devez le remplacer uniquement par un module identique, produit par le même fabricant.
  • Page 167 DANGER Certains produits laser contiennent une diode laser de classe 3A ou 3B. Prenez connaissance des informations suivantes: Rayonnement laser lorsque le carter est ouvert. évitez de regarder fixement le faisceau ou de l'observer à l'aide d'instruments optiques. évitez une exposition directe au rayon.
  • Page 168 Notice n° 10 ATTENTION: Ne posez pas d'objet dont le poids dépasse 82 kg sur les unités montées en armoire. Hardware Maintenance Manual: xSeries 340 Model 6RY...
  • Page 169 Wichtig: Alle Sicherheitshinweise in dieser Server-Bibliothek beginnen mit einer Nummer. Diese Nummer verweist auf einen englischen Sicherheitshinweis mit den übersetzten Versionen dieses Hinweises in diesem Abschnitt. Wenn z. B. ein Sicherheitshinweis mit der Nummer 1 beginnt, so erscheint die übersetzung für diesen Sicherheitshinweis in diesem Abschnitt unter dem Hinweis 1. Lesen Sie alle Sicherheitshinweise, bevor Sie eine Anweisung ausführen.
  • Page 170 Hinweis 2 ACHTUNG: Eine verbrauchte Batterie nur durch eine Batterie mit der IBM Teilenummer 33F8354 oder durch eine vom Hersteller empfohlene Batterie ersetzen. Wenn Ihr System ein Modul mit einer Lithium-Batterie enthält, ersetzen Sie es immer mit dem selben Modultyp vom selben Hersteller. Die Batterie enthält Lithium und kann bei unsachgemäßer Verwendung, Handhabung oder Entsorgung explodieren.
  • Page 171 Laserstrahlung bei geöffneter Tür. Niemals direkt in den Laserstrahl sehen, nicht direkt mit optischen Instrumenten betrachten und den Strahlungsbereich meiden. Hinweis 4 ≥18 kg ≥32 kg ≥55 kg ACHTUNG: Beim Anheben der Maschine die vorgeschriebenen Sicherheitsbestimmungen beachten. Hinweis 5 ACHTUNG: Mit dem Betriebsspannungsschalter an der Vorderseite des Servers und dem Betriebsspannungsschalter am Netzteil wird die Stromversorgung für den Server nicht unterbrochen.
  • Page 172 ACHTUNG: Keine Gegenstände, die mehr als 82 kg wiegen, auf Rack-Einheiten ablegen. Hardware Maintenance Manual: xSeries 340 Model 6RY...
  • Page 173 Importante: Tutti gli avvisi di attenzione e di pericolo riportati nella pubblicazione Server Library iniziano con un numero. Questo numero viene utilizzato per confrontare avvisi di attenzione o di pericolo in inglese con le versioni tradotte riportate in questa sezione. Ad esempio, se un avviso di attenzione inizia con il numero 1, la relativa versione tradotta è...
  • Page 174 Avviso 2 ATTENZIONE: Quando si sostituisce la batteria al litio, utilizzare solo una batteria IBM con numero parte 33F8354 o batterie dello stesso tipo o di tipo equivalente consigliate dal produttore. Se il sistema di cui si dispone è provvisto di un modulo contenente una batteria al litio, sostituire tale batteria solo con un tipo di modulo uguale a quello fornito dal produttore.
  • Page 175 Aprendo l'unità vengono emesse radiazioni laser. Non fissare il fascio, non guardarlo direttamente con strumenti ottici ed evitare l'esposizione diretta al fascio. Avviso 4 ≥18 kg ≥32 kg ≥55 kg ATTENZIONE: Durante il sollevamento della macchina seguire delle norme di sicurezza. Avviso 5 ATTENZIONE: Il pulsante del controllo dell'alimentazione situato sull'unità...
  • Page 176 ATTENZIONE: Non poggiare oggetti che pesano più di 82 kg sulla parte superiore delle unità montate in rack. Hardware Maintenance Manual: xSeries 340 Model 6RY...
  • Page 177 Related service information...
  • Page 178 Hardware Maintenance Manual: xSeries 340 Model 6RY...
  • Page 179 Related service information...
  • Page 180 Importante: Todas las declaraciones de precauciín de esta Biblioteca del servidor empiezan con un número. Dicho número se emplea para establecer una referencia cruzada de una declaraciín de precauciín o peligro en inglés con las versiones traducidas que de dichas declaraciones pueden encontrarse en esta secciín. Por ejemplo, si una declaraciín de peligro empieza con el número 1, las traducciones de esta declaraciín de precauciín aparecen en esta secciín bajo Declaraciín 1.
  • Page 181 Cuando desee sustituir la batería de litio, utilice únicamente el número de pieza 33F8354 de IBM o cualquier tipo de batería equivalente que recomiende el fabricante. Si el sistema tiene un mídulo que contiene una batería de litio, sustitúyalo únicamente por el mismo tipo de mídulo, que ha de estar creado por el mismo fabricante.
  • Page 182 • No retire las cubiertas. Si retira las cubiertas del producto láser, puede quedar expuesto a radiaciín láser perjudicial. Dentro del dispositivo no existe ninguna pieza que requiera mantenimiento. • El uso de controles o ajustes o la realizaciín de procedimientos que no sean los que se han especificado aquí...
  • Page 183 eliminar la corriente eléctrica del dispositivo, asegúrese de desconectar todos los cables de alimentaciín de la fuente de alimentaciín. Declaración 10 PRECAUCIÓN: No coloque ningún objeto que pese más de 82 kg (180 libras) encima de los dispositivos montados en bastidor. Related service information...

  • Page 184: Send Us Your Comments

    We want to know your opinion about this manual (part number 19K6113). Your input will help us to improve our publications. Please photocopy this survey, complete it, and then fax it to IBM HMM Survey at 919-543-8167 (USA). Name: _________________________________________...

  • Page 185: Problem Determination Tips

    IBM intends to make these available in all countries in which IBM operates. Any reference to an IBM product, program, or service is not intended to state or imply that only that IBM product, program, or service may be used. Subject to IBM’s valid...

  • Page 186: Trademarks

    Trademarks The following items are trademarks of the IBM Corporation in the United States or other countries or both: HelpCenter HelpFax OS/2 NetBAY3 Netfinity Netfinity Manager ThinkPad SystemXtra xSeries The following terms are trademarks of other companies: Notes Lotus Development Corporation MMX and Pentium are trademarks or registered trademarks of Intel Corporation.
  • Page 188 IBM@ Part Number: 19K6113 Printed in the United States of America on recycled paper containing 10% recovered post-consumer fiber. 19K6113 0419K6113...

This manual is also suitable for:

6ry

Table of Contents