Table of Contents
Advertisement
Ipv4 PXE Support [Enabled]
This item allows user to disable or enable the Ipv4 PXE Boot support.
Configuration options: [Disabled] [Enabled]
Ipv6 PXE Support [Enabled]
This item allows user to disable or enable the Ipv6 PXE Boot support.
Configuration options: [Disabled] [Enabled]
3.4.12
NVMe Configuration
This menu displays the NVMe controller and drive information of the connected
devices.
3.4.13
HDD Secure Erase
This menu displays the HDDs that suppot Secure Erase function.
3.4.14
HDD/SSD SMART Information
This menu displays the SMART information of the connected devices.
3.5
Monitor menu
The Monitor menu displays the system temperature/power status, and allows you
to change the fan settings.
CPU / MotherBoard Temperature [xxxºC/xxxºF]
The onboard hardware monitor automatically detects and displays the CPU/
motherboard temperatures. Select Ignore if you do not wish to display the
detected temperature.
CPU / Chassis Fan Speed [xxxx RPM] or [Ignore] / [N/A]
The onboard hardware monitor automatically detects and displays the CPU /
chassis fan speeds in rotations per minute (RPM). If the fan is not connected to the
motherboard, the field shows N/A. Select Ignore if you do not wish to display the
detected speed.
CPU Core Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage
The onboard hardware monitor automatically detects the voltage output through
the onboard voltage regulators. Select Ignore if you do not want to detect this item.
Q-Fan Configuration
Q-Fan Tuning
Click [OK] button to detect the lowest speed and configure the minimum duty circle
for each fan. Do not shut down or reset your system during the tuning progress.
Configuration options: [Ok] [Cancel]
3-25
Chapter 3: BIOS setup
Advertisement
Table of Contents
