hit counter script
Siemens SIMATIC IPC BX-32A Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Siemens Manuals
  4. Industrial PC
  5. SIMATIC IPC BX-32A
  6. Operating instructions manual
Siemens SIMATIC IPC BX-32A Operating Instructions Manual

Siemens SIMATIC IPC BX-32A Operating Instructions Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
07102005SIMATIC IPC BX-32A
SIMATIC
Industrial PC
SIMATIC IPC BX-32A
Operating Instructions
09/2023
A5E52798407-AB
Preface
Product description
Safety instructions
Installing and connecting
the device
Commissioning the device
Operating the device
Expanding and assigning
parameters to the device
Device maintenance and
repair
Technical specifications
Dimension drawings
Standards and approvals
Hardware description
Technical support
Markings and symbols
List of abbreviations
1
2
3
4
5
6
7
8
9
10
A
B
C
D

Advertisement

Table of Contents
loading

Related Manuals for Siemens SIMATIC IPC BX-32A

Summary of Contents for Siemens SIMATIC IPC BX-32A

  • Page 1 07102005SIMATIC IPC BX-32A Preface Product description SIMATIC Safety instructions Installing and connecting the device Industrial PC SIMATIC IPC BX-32A Commissioning the device Operating the device Operating Instructions Expanding and assigning parameters to the device Device maintenance and repair Technical specifications...
  • Page 2 Note the following: WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems.

  • Page 3: Preface

    General knowledge in the field automation control engineering is recommended. Scope of the operating instructions These operating instructions are valid for all order variants of the SIMATIC IPC BX-32A. History The following editions of these operating instructions have already been published:...
  • Page 4 Siemens' products and solutions undergo continuous development to make them more secure. Siemens strongly recommends that product updates are applied as soon as they are available and that the latest product versions are used. Use of product versions that are no longer supported, and failure to apply latest updates may increase customers' exposure to cyber threats.

  • Page 5: Table Of Contents

    Securing device........................30 3.2.3 Mounting onto DIN rail ...................... 32 3.2.3.1 Attaching the DIN rail bracket..................... 32 3.2.3.2 Mounting on DIN rails ......................33 3.2.4 Wall mounting ........................34 3.2.5 Upright mounting ......................35 SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...
  • Page 6 Removing and installing hardware ..................63 7.3.1 Changing the backup battery ..................... 63 Installing operating system, software and drivers ............... 66 Configuring firmware/BIOS....................66 Backing up data and changing partitions ................67 Recycling and disposal ....................... 67 SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...
  • Page 7 UL approval ........................82 10.5 FCC (USA) .......................... 83 10.6 Canada ..........................83 10.7 Australia / New Zealand...................... 84 10.8 Eurasion Customs Union EAC ..................... 84 10.9 Korea ..........................84 10.10 Taiwan ..........................85 SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...
  • Page 8 Markings and symbols ........................100 Overview ......................... 100 Safety ..........................100 Operator controls......................100 Certificates, approvals and markings ................101 Interfaces ........................102 List of abbreviations .......................... 103 Abbreviations ........................103 Index ..............................105 SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 9: Product Description

    • Boot modes Windows® operating Information on: • Online at: system • Commissioning the operating Microsoft® Windows® 10 system (https://support.industry.siemens. • Restoring the operating system com/cs/ww/en/view/109749498) • Configuration of the operating system SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...
  • Page 10 SIMATIC IPC Creating a bootable • Creating a bootable USB flash drive USB flash drive drive for recovery of operating (https://support.industry.siemens. system, software and drivers com/cs/ww/en/view/109811224) See also SIMATIC IPC DiagBase (https://support.industry.siemens.com/cs/ww/en/view/109749690) SIMATIC IPC DiagMonitor (https://support.industry.siemens.com/cs/ww/en/view/39129913) SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 11: Product Highlights

    Product description 1.2 Product highlights Product highlights The SIMATIC IPC BX-32A with innovative Intel processor architecture is a cost-optimized industrial box PC that complements the embedded series. It is a cost- and function-reduced alternative to SIMATIC IPC BX-39A. Device view...

  • Page 12: Applications

    The SIMATIC IPC has CE certification for use in the industrial sector as well as in residential and commercial areas and small businesses. In addition to the industrial applications, therefore, it can also be used in building automation or in public facilities. SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 13: External Design Of The Device

    2 x DPP Connection for monitors with DisplayPort interface X70/X71 ⑦ 2 × Ethernet Connections for Ethernet RJ45 for 10/100/1000 Mbps X1 P1/X2 P1 • Ethernet X1 P1 is iAMT-capable • Ethernet X2 P1 SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 14: Status Displays

    Status Meaning of the status LED 1 10 Mbps Lit green 100 Mbps Lit orange 1000 Mbps LED 2 No connection Lit orange Connection exists Flashes orange Activity See also Technical support (https://support.industry.siemens.com) SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 15: Internal Design Of The Device

    Power supply 9-36 V DC ② Slot for memory module ③ Motherboard ④ Backup battery ⑤ Slot for M.2 expansion module ⑥ Slot for drive (SSD) under the heat sink ⑦ Heat sink for drive (SSD) SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 16: Accessories And Spare Parts

    Accessories and spare parts 1.6.1 Hardware accessories Accessories from Siemens are available for your device that are not included in the scope of delivery. Obtaining accessories from the SIEMENS Industry Mall 1. On the Internet, go to Industry Mall (https://mall.industry.siemens.com).

  • Page 17: Safety Instructions

    • For control cabinet mounting: Use a central, easily accessible AC circuit breaker close to the device, if possible. • When you install the device, make sure that the power supply connector is easily accessible. SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...
  • Page 18 Validate the correct functioning of the plant to avoid functional restrictions. Use in industrial environments Note Use in an industrial environment without additional protective measures This device was designed for use in a normal industrial environment according to IEC 60721-3-3. SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...
  • Page 19 The device contains electronic components which may be destroyed by electrostatic charge. This can result in malfunctions and damage to the machine or plant. Take corresponding precautionary measures before you open the device. SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 20: Note On Transport And Storage

    • Do not expose the device to direct heat radiation from a heating device. • If condensation develops, wait approximately 12 hours or until the device is completely dry before switching it on. SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 21: Notes On Mounting

    When you plan your project, you should make allowances for: • The climatic and mechanical environmental conditions specified in the operating instructions. • Do not operate the device in severe operating conditions which are subject to caustic vapors or gases. SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...
  • Page 22 • Switch off radiating devices. • Reduce the radio output of radiating devices. • Read the information on electromagnetic compatibility. • Read the information in the technical specifications. See also Ambient conditions (Page 72) SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 23: Information On I/O Devices

    • The IPC in question must be turned off and the power supply connector must be plugged • During the measurement, all cables from the plant to the IPC should be connected. • All other components in the plant must be active. SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 24: Notes On Device And System Extensions

    • UL approval of the device only applies when the UL-approved components are used according to their "Conditions of Acceptability". • We are not liable for functional limitations caused by the use of third-party devices or components. SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 25: Installing And Connecting The Device

    You will find the latest information on additional software for your device under: Accessories and spare parts (Page 16) Printed documents • Quick Install Guide SIMATIC IPC BX-32A • Product Information "Important notes on your device" SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 26: Checking The Delivery Package

    If the contents of the package are incomplete, damaged or do not correspond to your order, you can use the After Sales Information System (ASIS) (http://siemens.com/asis) to provide feedback on product deliveries and repairs. Complete the online form for product delivery (quality control notification) under the heading "Product delivery: Feedback on quality control and repairs".

  • Page 27: Identification Data Of The Device

    The following illustrations are examples. The data of your device may differ from the data in these examples. Nameplate The following image shows the nameplate on the SIMATIC IPC BX-32A as an example. COA label The COA label (Certificate of Authenticity) is located on the rear of the device.

  • Page 28: Installing The Device

    • Above at least 50 mm • At least 50 mm at the side Note Observe the permitted temperature range for operation of the device in the respective mounting position as defined in section "Technical specifications (Page 68)". SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...
  • Page 29 The interfaces are at the bottom. Vertical mounting position The vertical installation position is permissible for vertical mounting: Vertical mounting The interfaces are at the front. The con- nection for the power supply is located at the bottom. SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 30: Securing Device

    The device may not be securely fitted if you use anchors and screws other than those specified below for mounting. The device can fall and may be damaged. • Use only the specified anchors and screws. SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...
  • Page 31 8 mm, 40 mm deep • Dowel, ∅ 8 mm, 40 mm length • Screw, ∅ 5 mm, 40 mm length Plasterboard, 14 mm Toggle bolt, ∅ 4 mm, 50 mm length min. 13 mm thickness SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 32: Mounting Onto Din Rail

    (as specified in order number). Requirements • 1 DIN rail clip • 4 screws • 1 T20 screwdriver Procedure 1. Secure the DIN rail bracket with four screws with a tightening torque of 2.5 Nm. SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 33: Mounting On Din Rails

    You will hear the device click into place. Removal 1. Push down the device until it is released by the rail clips. 2. Swing the device out of the DIN rail. 3. Lift the device up and off. SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 34: Wall Mounting

    (as specified in order number). Requirements • 2 wall mounting brackets • 6 screws • 1 T20 screwdriver Procedure 1. Secure the wall mounting brackets with three screws each and a tightening torque of 2.5 Nm. SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 35: Upright Mounting

    (as specified in order number). Requirements • 2 vertical mounting brackets • 6 screws • 1 T20 screwdriver Procedure 1. Secure the portrait mounting brackets with three screws each and a tightening torque of 2.5 Nm. SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 36: Connecting The Device

    2. Screw the cable lug onto the protective conductor connection as shown. 3. Wire the protective conductor to the protective conductor connection of the control cabi- net in which the device is installed. SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 37: Connecting The Power Supply

    Utilisez des câbles en cuivre (Cu) pour tous les câbles d'alimentation qui sont raccordés à l'appareil par des bornes, par exemple les câbles d'alimentation 24 V CC sur le connecteur d'alimentation 24 V CC. SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...
  • Page 38 Installing and connecting the device 3.3 Connecting the device 1. Connect the cables as shown with a tightening torque of 0.6 Nm. Make sure the connection terminal is in the correct position as shown. SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 39: Connecting The 9-36 V C Power Supply

    The 9-36 V DC power supply is protected against polarity reversal. If you mix up the 9-36 V DC connecting cables and ground, the device is not damaged but does not switch on. After the power supply has been connected correctly, the device will again be ready to operate. SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 40: Connecting I/O Devices

    1. Connect the I/O devices to the respective interfaces. Information on the position of the interfaces is available in "Interfaces and operating elements (Page 13)". 2. Secure the cables with the strain relief. See: Securing the lines (Page 44) SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...
  • Page 41 The following table shows the various connection options for the monitors on the device interfaces. Motherboard DPP1 DPP2 Monitor 1 Monitor 2 1) - via DP to DVI-D adapter 2) - via DP-VGA adapter SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 42: Connecting Expansion Cards

    • Observe the max. permissible power consumption values for the device. Requirements • The device is switched off. Procedure The procedure is described based on the example of a USB expansion card. 1. Connect the cable to the marked slot. SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 43: Connecting The Device To Networks

    Control level. You can find information on this under SIMATIC NET (http://w3.siemens.com/mcms/automation/en/industrial- communications/Pages/Default.aspx). The software package and the documentation are not included in the scope of delivery. Additional information You can find additional information on the Internet at: Technical Support (https://support.industry.siemens.com). SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 44: Securing The Lines

    2. Pass the cable tie around the strain relief bar and secure the cables as shown. 3. Cut off the protruding ends of the cable ties. SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 45: Commissioning The Device

    You can find information on first startup of the device and commissioning the installed Windows® operating system in the operating system documentation. See also "Important instructions and manuals for operating the device (Page 9)" for more on this. SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 46: Switching Off The Device

    Perform a hardware reset only in the case of an emergency. • Operate the on/off switch to initiate a hardware reset, see "Interfaces and operating elements (Page 13)". See also General safety instructions (Page 17) SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 47: Operating The Device

    A USB keyboard and mouse and a monitor can be connected later for diagnostics. A digital DVI monitor or DisplayPort monitor is only activated retrospectively when the Windows operating system has booted completed. SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 48: Expanding And Assigning Parameters To The Device

    Take corresponding precautionary measures before you open the device. Requirements • The device is fully disconnected from the line voltage, see "Switching off the device (Page 46)". • All connecting cables are unplugged. • Screwdriver of type Torx T10 SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...
  • Page 49 6.1 Opening the Device Procedure 1. Remove the marked screws. 2. Swivel the front panel away to the rear, as shown in the image. 3. Put down the front panel. Close the device in reverse order. SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 50: Open Device With Expansion Slots

    Take corresponding precautionary measures before you open the device. Requirements • The device is fully disconnected from the line voltage, see "Switching off the device (Page 46)". • All connecting cables are unplugged. • Screwdriver of type Torx T10 SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...
  • Page 51 6.2 Open device with expansion slots Procedure 1. Remove the marked screws. 2. Slide the front panel forwards in the di- rection of the arrow. 3. Put down the front panel. Close the device in reverse order. SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 52: Expansion Cards

    • You can find information on the type of expansion card you can install in specific slots under "Expansion card slots on the bus board (Page 89)". SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...
  • Page 53 2. Remove the retainer (2). 3. Insert the expansion card into the slot on the bus board (3). Secure the expansion card with the corre- sponding screw. SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...
  • Page 54 Proceed in reverse order of installation. Configuring BIOS setup You may need to make settings in the BIOS Setup. For detailed information about installation, please refer to the documentation provided with the specific expansion card. SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 55: Expansion Modules (M.2)

    • The connecting cable between M.2 modules and conditioner card should be at least 150 mm long. See also Position of the interfaces on the motherboard (Page 87) Dimension drawing of expansion modules (M.2) (Page 80) SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 56: Installing/Removing Expansion Modules (M.2)

    Torx T8. Insert the M.2 module into the relevant slot (X100). Take care not to touch the contacts of the M.2 module when you do this. SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...
  • Page 57 You may need to make settings in the BIOS Setup. For detailed information about installation, please refer to the documentation provided with the specific expansion module. See also Replacing M.2 NVMe SSD (Page 60) SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 58: Memory Modules

    • Memory transaction rate 3200 MT/sec "unbuffered" • "without ECC" Note Use only the memory modules recommended by Siemens AG. Requirement • The device is open, see important information regarding this under "Opening the Device (Page 48)" or "Open device with expansion slots (Page 50)".
  • Page 59 After insertion and removal Close the device. The new memory capacity will be automatically detected and displayed in the BIOS setup when the device is switched on. SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 60: Drives

    • M.2 NVMe SSDs with a length of 30 or 80 mm • The device is fully disconnected from the line voltage, see "Switching off the device (Page 46)". • Screwdrivers of type Torx T10 and T8 SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...
  • Page 61 Torx T8. 4. Pull the M.2 NVMe SSD out of the slot. Procedure - Installation Follow the steps for removal in reverse order. See also Hardware accessories (Page 16) SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 62: Device Maintenance And Repair

    Replacement interval Backup battery 5 years Depending on the type of use The interval for replacement of the flash drives (SSD) depends greatly on the type of use. A specific interval cannot be given. SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 63: Removing And Installing Hardware

    100 °C and protect the battery from direct sunlight, moisture and condensation. SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...
  • Page 64 – Courant de charge anormal max. : 5 mA • Pour toute demande concernant la maintenance du produit, contactez le support technique (Page 96) Siemens. • Ne jetez pas au feu des piles au lithium, n'effectuez pas de soudage sur la pile, ne la rechargez pas, ne l'ouvrez pas, ne la court-circuitez pas, n'intervertissez pas les pôles, ne...
  • Page 65 1. Remove the battery from socket as shown. 2. Place the new battery below the two con- tacts (1) and press it into the base (2) while applying slight pressure. 3. Close the device. 4. Check the firmware/BIOS settings. SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 66: Installing Operating System, Software And Drivers

    Installing operating system, software and drivers You can restore the factory settings of the target system (i.e. the volume partitions, the operating system with installed device drivers, and the SIEMENS software products). This allows you to restore your device quickly if it has suffered damage.

  • Page 67: Backing Up Data And Changing Partitions

    Contact a certified disposal service company for electronic scrap for environmentally sound recycling and disposal of your old device, and dispose of it according to the relevant regulations in your country. SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 68: Technical Specifications

    78 W (at 24 V) 76 W (at 36 V) Noise emission < 40 dB(A) according to DIN 45635-1 Degree of protection IP 20 to IEC 60529 Quality assurance In accordance with ISO 9001 SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...
  • Page 69 • IEC 61010-2-201 • EN 61010-2-201 • DIN EN 61010-2-201 • UL 61010-2-201 • CSA C22.2 No 61010-2-201 not evaluated by UL See also Connecting the 9-36 V C power supply (Page 39) SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 70: Current/Power Requirements And Power Supply

    Device with BIOS setting "Power & 2.88 A 34.56 W 1.40 A 33.60 W Performance Scenario" = "Balanced" Device with BIOS setting "Power & 3.25 A 39.00 W 1.60 A 38.40 W Performance Scenario" = "Max Per- formance" SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 71: Technical Specifications Dc Power Supply (Dc)

    3 V/m 2.7 – 6 GHz, 80% AM to IEC 61000-4-3 • 10 V 10 kHz – 80 MHz, 80% AM to IEC 61000-4-6 Immunity to magnetic fields 100 A/m; 50 Hz; 60 Hz (according to IEC 61000-4-8) SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 72: Ambient Conditions

    This information applies to the setting "Balanced" in the BIOS Setup, menu "Advanced" > "Power&Performance" > "CPU Power Management Control" > "Power & Performance Scenario"; the maximum ambient temperature must be reduced by 5 °C for the setting "Max Performance". SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 73: Technical Specifications Of The Drives

    See the note in "Applicability of technical specifications (Page 68)". Graphics controller Intel® UHD Graphics 16 EUs: • Intel® Celeron® 6600HLE • Intel® Xeon® W-11155MLE Resolutions/frequencies/colors DisplayPort: Max. 4096 × 2304 / 60 Hz / 36 bits SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 74: Technical Specifications Of The Interfaces

    No teaming with AMT. When using AMT, the interface X1 P1 must be used for connection to remote maintenance. Only possible with ports X1 P1 and X2 P1 SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 75: Technical Specifications Of The Operating Systems

    The following table lists the partitioning for disks ≥ 200 GB in GPT mode: Partition Name Size File system First Boot 260 MB FAT32 Second 128 MB None Third System 160 GB NTFS Fourth WinRE 500 MB NTFS Fifth Data Remainder NTFS SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 76: Dimension Drawings

    Dimension drawings Dimension drawing - mounting on a DIN rail SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 77: Dimension Drawing - Wall-Mounting

    Dimension drawings 9.2 Dimension drawing - wall-mounting Dimension drawing - wall-mounting SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 78: Dimension Drawing - Vertical Mounting

    Dimension drawings 9.3 Dimension drawing - vertical mounting Dimension drawing - vertical mounting SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 79: Dimension Drawing - Device With Expansion Slots

    Dimension drawings 9.4 Dimension drawing - device with expansion slots Dimension drawing - device with expansion slots Device with one PCIe slot Dimension drawing of the expansion cards SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 80: Dimension Drawing Of Expansion Modules (M.2)

    Dimension drawings 9.6 Dimension drawing of expansion modules (M.2) Dimension drawing of expansion modules (M.2) Maximum dimensions of expansion modules Dimension drawing of the conditioner card SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 81: Standards And Approvals

    • 2011/65/EU "Restriction of the use of certain hazardous substances in electrical and electronic equipment" (RoHS Directive) EU Declaration of Conformity The associated declaration of conformity is available on the Internet at the following address: Certificate Box PC (http://support.automation.siemens.com/WW/view/en/10805671/134200). SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 82: Ukca Marking

    DIN ISO 9001 certificate and software license agreements ISO 9001 certificate The Siemens quality management system for our entire product creation process (development, production and sales) meets the requirements of ISO 9001. This has been certified by DQS (the German society for the certification of quality management systems).

  • Page 83: Fcc (Usa)

    10.6 Canada CANADA Canadian Notice This Class A digital apparatus complies with Canadian ICES-003. Avis Canadien Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Ca- nada. SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 84: Australia / New Zealand

    This product meets the requirements of Korean certification. This product satisfies the requirement of the Korean Certification (KC Mark). 이 기기는 업무용(A급) 전자파 적합기기로서 판매자 또는 사용자는 이 점을 주의하시기 바라며 가정 외의 지역에서 사용하는 것을 목적으로 합니다. SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 85: Taiwan

    Note 3：The "−" indicates that the restricted substance corresponds to the exemption. 電池和蓄電池 WARNING 警告 — 置換可能影響安全防護的錯誤型式的電池（例：在某些鋰電池類型的情形下）； — 電池丢入火焰或烤箱中，或將電池作可能導致爆炸的機械擠壓或切割； — 電池置於可能導致爆炸或可燃性液體或氣體洩漏的高溫環境中；且 — 電池承受可能導致爆炸或可燃性液體或氣體洩漏的極度低氣壓。 Responsible party for Supplier's Decalation of Conformity / 供應商符合性聲明的責任方 西門子股份有限公司 臺北市11503南港區園區街3號8樓 電子郵件信箱：Adscs.taiwan@siemens.com SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 86: Hardware Description

    Slot for expansion modules (M.2) ④ Backup battery ⑤ Slot for the bus board Technical features of the motherboard Technical features of the motherboard can be found under "Technical specifications of the motherboard (Page 73)". SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 87: Position Of The Interfaces On The Motherboard

    (10) USB 2.0 (X64 Internal 1 /X64 Internal 2) (3) 2 × Ethernet (7) COM3 (X32) (11) Power supply (X10) (X1 P1 iAMT-capable /X2 P1) (4) COM1 (X30) (8) Interface for M.2 NVMe SSD (X101) SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 88: Internal Interfaces

    USB channel, 10-pin header M.2 interface Internal M.2 Key B, assigned PCIe bus signals M.2 interface Internal M.2 Key M, occupied with PCIe bus signals A.2.2 USB ports Designation VBUS_USB1 VBUS_USB2 USB1_D- USB2_D- USB1_D+ USB2_D+ SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 89: Bus Board

    5 V voltage Output Ground + 3.3 V 3.3 V voltage Output max. permitted current: 1 A; with this power requirement, the total power requirement of the PCI slots must not be exceeded. SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 90: External Interfaces

    Assignment nector COM1 9-pin SUB-D connector COM2 9-pin SUB-D connector USB 3.2 X60, USB 3.2 Gen 2 socket type A X62, Ethernet 1, 2 X1 P1, RJ45 X2 P1, X70, 20-pin DisplayPort connector SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 91: System Resources

    The status of the user LEDs L1/L2/L3 can be read and written as follows. Note: Always use read-modify-write operations so that reserved bits are not overwritten. This can lead to impairment of the functionality of the device. SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...
  • Page 92 LED L3 / Maint dark (default) LED L3 / Maint lit red LED L3 / Maint lights up green LED L3 / Maint lit yellow Reserved WDT system reset: On WDT system reset: Off SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 93: Battery Status Register (Read Only)

    Meaning of the bits Reserved Reserved Reserved CMOS battery capacity is still sufficient CMOS battery capacity is exhausted (remain- ing capacity is sufficient for approx. one month) CMOS battery is empty or missing Reserved Reserved Reserved SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 94: Watchdog Timer (Wdt) Register (Read/Write)

    This step resets the "PC ON/WD" LED from pulsing red to its normal state (lit green). The WDT starts counting down. To prevent this behavior, stop the WDT before resetting the status to "Active". SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...
  • Page 95 WDT counter register (read/write, address 286h) Bits Meaning of the bits 00h-FFh Countdown time WDT status register (read/write, address 287h) Bits Meaning of the bits Reserved Reserved Reserved Reserved WDT status: Active WDT status: Expired Reserved Reserved Reserved SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 96: Technical Support

    You can find additional information and support for the products described on the Internet at the following addresses: • Technical support (https://support.industry.siemens.com) • Support request form (https://www.siemens.com/supportrequest) • After-sales information system for SIMATIC PC / PG (https://www.siemens.com/asis) • SIMATIC Documentation Collection (https://www.siemens.com/simatic-tech-doku-portal) • Your local representative (https://www.automation.siemens.com/aspa_app) • Training center (https://siemens.com/sitrain) •...

  • Page 97: Troubleshooting

    If you use an adapter or expansion for the mouse cable, also check these connectors. If the cursor still does not appear on the screen after you have performed these checks and actions, con- tact your technical support team. SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 98: Problems When Booting The Device

    "Boot > EFI": firmware/BIOS The boot data carrier is set up with Enable UEFI mode in the firmware/BIOS. GPT and UEFI boot is deactivated in the firmware/BIOS SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 99: Problems When Using Expansion Cards

    • Signal frequencies or signal pansion card was the cause of the fault. Replace this with a levels are not adhered to Siemens expansion card or contact the supplier of the expan- • Different pin assignment sion card. If the device still crashes, contact your technical support team.

  • Page 100: Markings And Symbols

    Disconnect the power plug before Opening for Kensington lock opening Attention ESD (Electrostatic sensitive Warning of hot surface device) Operator controls Symbol Meaning Symbol Meaning On/off switch, without electrical isola- On/off switch, without electrical isola- tion tion SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 101: Certificates, Approvals And Markings

    EFUP (Environment Friendly Use Peri- Approved for Korea od) marking for China Test mark of the Underwriters Labora- UKCA marking for Great Britain tories Approval for India Disposal information, observe the local regulations. Approval for Taiwan SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 102: Interfaces

    LAN interface, not approved for con- Line Out necting WAN or telephone Serial port Microphone input USB port Universal Audio Jack USB 2.0 high-speed port Headphone output USB 3.0 super-speed port USB 3.1 SuperSpeedPlus interface SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 103: List Of Abbreviations

    Digital display interface with digital and VGA signals Error checking and correction Error correction code Extensible Firmware Interface Electrostatic-sensitive components European standard Ground Chassis ground Hard Disk Drive Hard disk drive Height unit SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...
  • Page 104 US organization for tests and certifications accord- ing to own or binational standards (with CSA / Canada) standards. Universal Serial Bus Video Graphics Array Video adapter which meets industrial standard Watchdog Program monitoring with error detection and alarming. SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

  • Page 105: Index

    Dimensions, 68 Main memory, 73 Drive Marking Replace in the SIMATIC IPC Slider, 60 EU Declaration of Conformity, 81 Mechanical ambient conditions, 72 Memory modules, 73 Motherboard Design, 86 Mounting Modules, 42, 53, 56 SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...
  • Page 106 Protective conductor, 36 Connecting, 36 Quality control notification, 26 RJ45 Ethernet, 43 Safety instructions General, 17 Scope, 3 Securing the cables, 44 Setup, (BIOS Setup) SIMATIC IPC Image & Partition Creator, (Image & Partition Creator) SIMATIC IPC BX-32A Operating Instructions, 09/2023, A5E52798407-AB...

Table of Contents