Page 2
Please read this user manual first! Dear Customer, We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
CONTENTS 1 INSTRUCTIONS FOR SAFETY Adjusting the height of the upper basket ..........25 AND ENVIRONMENT Collapsible upper basket wires ..26 General safety ........4 Ceiling cutlery basket ......26 Intended use ..........4 Children’s safety ........5 5 OPERATING THE PRODUCT 27 Disposing of packaging material ..5 Programme Selection / Programme Transportation of the product ....5...
instructions for safety and environment This section contains safety Never touch the plug with • instructions that will help to get wet hands! Never unplug by protected from risk of personal pulling on the cable, always injury or property damage. Failure pull out by grabbing the plug.
instructions for safety and environment Children’s safety This appliance is intended • to be used in household and Electrical products are • similar applications such as: dangerous for the children. - Staff kitchen areas in shops, Keep children away from the offices and other working product when it is in use.
instructions for safety and environment Package information 1. Unplug the product before transporting it. Packaging materials of the 2. Remove water drainage and product are manufactured water supply connections. from recyclable materials in accordance with our National 3. Drain the remaining water in Environment Regulations.
Dishwasher Technical specifications Compliance to standards and test data / EC declaration of conformity This product complies with the following EU directives; Development, production and sales stages of this product comply with the safety rules included in all pertaining European Community regulations. 2014/35/EU, 2014/30/EU, 93/68/EC, IEC 60436/DIN 44990, EN 50242 Power input 220-240 V, 50 Hz (see rating label)
Installation Appropriate installation Refer to the nearest Authorised Service Agent for installation of your product. To location make the product ready for use, make sure Place the product on a solid and flat • that the electricity, tap water supply and floor that has sufficient load carrying water drainage systems are appropriate capacity! The product must be...
Installation Permitted water temperature: connected to the drain hole or sink’s up to 25°C ( 60°C for products drainage. The length of this connection equipped with Aquasafe+; please must be min. 50 cm and max. 100 cm from refer toAquasafe+ section ) the floor.
Installation Aquasafe+ The voltage and allowed fuse or breaker • protection are specified in the “Technical (depends on model) specifications” section. If the current The Aquasafe+ system protects against value of the fuse or breaker in the house water leaks that may occur at the hose is less than 16 Amps, have a qualified inlet.Water contact with the valve box of electrician install a 16 Amp fuse.
Preparation Tips for energy saving Adjusting the water softening system Following information will help you use the product in an ecological and energy- Cleaning, rinsing and drying performance of efficient manner. your dishwasher will increase when water Wipe away any coarse food remnants on softening system is adjusted properly.
Page 13
Preparation Remove the test Turn on the tap and Hold the test strip in Remove the test Wait for 1 minute. The test strip shows strip from the let the water run for the water for about strip from the water you the hardness packet.
Page 14
Preparation Water hardness level adjustment table Hardness English Water German Water French Water Water Hardness Level Indicator Level Hardness °dE Hardness °dH Hardness °dF Level 0 Press the Selection key to switch the water hardness level to position 1. (r1) Level 1 9-13 Level 2...
Preparation It is recommended to use If the hardness level of the supply water granule- or powder-formed is above 90 °dF or if you are using well softening salts in the water water, then it is recommended to use water softening system.
Preparation Adding detergent You can put about 2 kg of softening salt into the salt Pay attention to the warnings reservoir. on the detergent packaging to get better washing and 5. Replace the lid and tighten it when the drying results. Contact the reservoir is full.
Preparation Use powder or liquid/gel detergent in short programmes without prewash since the solubility of the tablet detergent changes depending on the temperature and time. Tablet detergents In addition to the conventional tablet 3. Push the lid of the detergent dispenser detergents, there are also commercially to close it.
Preparation 2. Fill the reservoir until “MAX” level. Contact the detergent manufacturer if your dishes are wet and/or if you notice limescale spots particularly on your glasses after the washing programme is over when using a tablet detergent. When you switch to powder detergent from tablet detergent: Make sure that salt and rinse aid 3.
Preparation Items not suitable for of water in deep hollows is prevented. washing in the dishwasher To prevent possible injuries, always place the sharp and Never wash dishes soiled by cigarette • pointed dishes such as service ash, candle remnants, polish, dyestuff, fork, bread knife, etc.
Page 20
Preparation Suggestions for loading the dishwasher Improper Loading Of Dishware Lower basket Upper basket /43 EN Dishwasher / User’s Manual...
Preparation Cutlery basket Collapsible lower basket tines (depends on model) Cutlery basket is designed to wash your (depends on model) dishes such as knife, fork, spoon, etc. in an Foldable tines (A) located at the lower efficient manner. basket of the machine are designed for Since the cutlery basket can be moved (A, an easier placement of large pieces such B), you can create more space while placing...
Preparation Bringing the tines to the horizontal position by holding them from the tips may cause them to bend. Therefore, it will be appropriate to bring the tines in the middle to horizontal or vertical position by holding them from their stems and pushing in the direction of arrow.
Preparation Lower basket bottle wire (depends on model) The bottle wire is designed for easier washing of long pieces with wide mouths. You may take out the bottle wire from the basket when not in use by pulling it out from both sides (H).
Preparation Adjusting the height of the To lower the basket, while it is in the uppermost position; upper basket Hold the upper basket wires with both (depends on model) hands, slightly lift up the basket and The upper basket height adjustment simultaneously push and release the mechanism has been designed for you to latches shown in the figure (B).
Preparation Adjusting the height of the To raise the basket, hold the wires of upper basket the basket and pull the basket upwards (depends on model) with both hands while the basket is at Upper basket height adjustment the lowermost position (B) mechanism is designed so that you can 2.
Preparation Collapsible upper basket Ceiling cutlery basket wires (depends on model) Ceiling cutlery basket is designed to wash (depends on model) your cutlery items such as forks, spoons You can use collapsible wires when you and etc. by placing them between the bars need a larger space for your dishes in the on the basket.
Operating the product 3 4 5 On / Off Key 2. Programme Selection Keys 3. Menu Direction Selection Key / Hygiene Intense function 4. Menu Key (3 sec) / Selection / Confirmation Key / AquaIntense Function Fast+ Function 5. Menu Direction Selection Key / 6.
Operating the product On/Off Key Programme selection When you press the On/Off key, the Press the On/Off button to turn on indicator lights illuminate on the display your machine. for ON position. The lights turn off in OFF 2. Check the Salt and Rinse Aid indicators position.
Operating the product Auxiliary functions Fast+ Function It shortens the time of the washing cycle Washing programmes of your dishwasher selected and decreases water consumption are designed to obtain the best cleaning by enabling washing under higher pressure. effect, considering the type of the soiling, soiling degree and properties of the dishes Floor illumination to be washed.
Page 31
Operating the product Submenu Functions: Automatic Liquid/Gel Detergent Function (depends on the model) Off/On SelfDry Function Off/On Detergent use setting: Tablet Detergent Function Off/On Level 1: 10 ml lower than the default value Level 2: 5 ml lower than the default value Level 3: Use the default liquid detergent amount determined by the program.
Page 32
Operating the product Tablet detergent function Interior Lighting (depends on model) (depends on the model) Allows to obtain a better drying Some models have interior lighting to performance from the multi-purpose illuminate the interior when the door is detergents called as all in one detergents opened.
Operating the product Scheduling the washing 2 - 1 countdown, 0:01 is displayed, close time the door of the product and wait for the draining process complete. Draining is Time Delay completed in 2 minutes and the machine If an economical electricity tariff is applied gives an audible warning when it is in your region, you can use the Time completed.
Operating the product Cancelling the programme Adjusting the amount of rinse aid Open the door of the product Press and hold the Programme Selection / Programme After switching on your machine, press Cancel keys for 3 seconds. After the 3 - the Menu key for 3 second.
Operating the product InnerClean For energy saving, the machine is automatically turned off This programme is recommended to be following the completion of the operated on each 1-2 months for machine programme or if the programme cleaning and necessary hygiene. The is not started.
Maintenance and cleaning Cleaning the filters Service life of the product extends and frequently faced problems decrease if it is Clean the filters at least once a week in cleaned at regular intervals. order for the machine operates efficiently. Unplug the product and turn off Check if food residues are left on the filters.
Maintenance and cleaning Cleaning the hose filter Damages on the machine that may be caused by impurities coming from the urban supply water or your own water installation (such as sand, dirt, rust, etc.) can be prevented by means of the filter attached to the water inlet hose.
Maintenance and cleaning Cleaning the impellers Upper impeller Clean the impellers at least once a week in Check if the holes on the upper impeller (1) order for the machine operates efficiently. are clogged. If they are clogged, remove and clean the impeller. Turn its nut to left to Lower impeller remove the upper impeller.
Troubleshooting Machine does not start. • Power cable is unplugged. >>> Check if the power cable is plugged in. • Fuse is blown. >>> Check the fuses in your house. • Water is cut. >>> Make sure that the water inlet tap is open. •...
Page 40
Troubleshooting • Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the machine. • Machine is unloaded right after the programme is over. >>> Do not unload your machine right after washing process is completed.
Page 41
Troubleshooting the filling process. Run the prewash programme to remove the salt that spilled inside the machine. Since the salt granules that will remain under the lid will dissolve during prewash, causing the lid loosen, check the lid once again at the end of the programme. There is a different odour in the machine A new machine has a peculiar odour.
Page 42
Troubleshooting Detergent remains in detergent dispenser. • Detergent dispenser was damp when adding detergent. >>> Make sure that the detergent dispenser is dried well prior to filling it with detergent. • Detergent is added long before the washing process. >>> Pay attention to add detergent shortly before start-up of the washing.
Page 43
Troubleshooting A smear remains on glasses that resembles milk stain which can not be removed when wiped by hand. A bluish / rainbow appearance occurs when the glass is pointed to light. • Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled rinse aid when adding rinse aid.