Advertisement
Power input
Equipment is to be used only in a restricted access location and installed/operated only by trained service personnel.
RPS2300 Redundant Power Supply (Optional)
The MS210 series supports connecting the Cisco RPS2300 for optional power redundancy. MS210 series models
support failover and reversion to main power once it has been restored. The following Cisco part numbers are
supported:
Part number
PWR-RPS2300
C3K-PWR-750WAC
C3K-PWR-1150WAC
CAB-RPS2300-E=
Bringing your Stack Online
The MS210 and MS225 series switches additionally support cross-model stacking, meaning an MS210 can be
stacked with an MS225 and vice-versa.
MS210 switches can be connected in a physical stack using dedicated stacking ports and cables. Configuration steps
and additional information about stacking can be found here.
Mounting hardware
The mounting hardware includes a rack mount kit for standard 1U racks. When installing the device, make sure that
there is sufficient space between the rear of the rack and other obstacles to ensure adequate airflow.
Optional Mid-Mount bracket
MS210 48 port models are designed for an optional MA-MNT-MID-1 mid-mount bracket when using 2-post racks.
Power cords may be ordered separately.
Description
RPS Chassis
750W RPS Power supply (see recommendations)
1150W RPS Power supply (see recommendations)
RPS 22-pin cable
4
Advertisement
