Defining The Message Severity Level - Cisco Catalyst 9500 Manual
System management configuration guide, cisco ios xe amsterdam 17.2.x
Hide thumbs
Also See for Catalyst 9500:
- Manual (310 pages) ,
- Configuration manual (223 pages) ,
- Hardware installation manual (122 pages)
Table of Contents
Advertisement
Configuring System Message Logs
Step 2
Step 3
Defining the Message Severity Level
Limit messages displayed to the selected device by specifying the severity level of the message.
This task is optional.
Procedure
Step 1
Step 2
Step 3
Step 4
Command or Action
Device# configure terminal
service sequence-numbers
Example:
Device(config)# service sequence-numbers
end
Example:
Device(config)# end
Command or Action
configure terminal
Example:
Device# configure terminal
logging console level
Example:
Device(config)# logging console 3
logging monitor level
Example:
Device(config)# logging monitor 3
logging trap level
Example:
Device(config)# logging trap 3
System Management Configuration Guide, Cisco IOS XE Amsterdam 17.2.x (Catalyst 9500 Switches)
Defining the Message Severity Level
Purpose
Enables sequence numbers.
Returns to privileged EXEC mode.
Purpose
Enters global configuration mode.
Limits messages logged to the console.
By default, the console receives debugging
messages and numerically lower levels.
Limits messages logged to the terminal lines.
By default, the terminal receives debugging
messages and numerically lower levels.
Limits messages logged to the syslog servers.
By default, syslog servers receive informational
messages and numerically lower levels.
185
Advertisement
Table of Contents
Troubleshooting
