Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for AEG LFR7314O4V
Summary of Contents for AEG LFR7314O4V
- Page 1 EN User Manual | Washing Machine LFR7314O4V aeg.com\register...
-
Page 2: Table Of Contents
FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. -
Page 3: Safety Information
SAFETY INFORMATION Before beginning the installation and use of this appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. - Page 4 1.2 General Safety • This appliance is for washing domestic-type, machine- washable laundry only. • This appliance is designed for single household domestic use in an indoor environment. • This appliance may be used in, offices, hotel guest rooms, bed & breakfast guest rooms, farm guest houses and other similar accommodation where such use does not exceed (average) domestic usage levels.
-
Page 5: Safety Instructions
2. SAFETY INSTRUCTIONS 2.1 Installation • WARNING: This appliance is designed to be installed / connected to a grounding connection in the building. • Always use a correctly installed The installation must comply with shockproof socket. relevant national regulations. • Make sure that the parameters on the rating plate are compatible with the •... -
Page 6: Product Description
• Make sure that there is access to the tap elements, including heat pumps, piping after the installation. and related equipment including hoses, valves, filters and aquastops, printed 2.4 Use circuit boards, electronic displays, pressure switches, thermostats and sensors, software and firmware including WARNING! reset software, door, door hinge and Risk of injury, electric shock, fire, burns... - Page 7 • The AEG Steam Fragrance, thanks to the necessary. steam programmes offers the perfect • The steam has a quick and easy way to solution for refreshing even the most refresh the clothes.
-
Page 8: Technical Data
4. TECHNICAL DATA Dimension Width/ Height/ Total depth 59.7 cm /84.7 cm /66.0 cm Electrical connection Voltage 230 V Overall power 2100 W Fuse 10 A Frequency 50 Hz Level of protection against ingress of solid particles and moisture ensured IPX4 by the protective cover, except where the low voltage equipment has no protection against moisture... - Page 9 5. Carefully put the appliance down on its rear side. 9. Remove the power supply cable and the 6. Put the front polystyrene packaging drain hose from the hose holders. element on the floor under the appliance. It is possible to see water flowing Make sure not to damage the hoses.
- Page 10 2. Loosen or tighten the feet to adjust the level. If you install the appliance on a plinth that is not an accessory supplied by AEG, secure WARNING! the appliance with the fixing plates. This spare part is available in web shop or from Do not put cardboard, wood or equivalent authorised dealer.
- Page 11 Do not use an extension hose if the inlet hose is too short. Contact the service 45º 45º centre for information on inlet hose 20º 20º replacement. 5.5 Water-stop device The inlet hose has a water stop device. This device prevents water leaks in the hose because of its natural ageing.
- Page 12 It is possible to connect the drain hose in different ways: min.600 mm max.1000 mm • Connect the drain hose to the spigot and tighten it with a clamp. • Position the hose directly to a built-in drain The end of the drain hose must always pipe in the room wall and tighten it with a be ventilated , i.e.
-
Page 13: Control Panel
Connect the appliance to an earthed The power supply cable must be easily socket. accessible after installing the appliance. For any electrical work required to install this appliance, contact our Authorised Service Centre. The manufacturer does not accept any responsibility for damage or injury through failure to comply with the above safety precaution. - Page 14 6.2 Display Door locked indicator. Washing phase indicator. It flashes during pre-wash and wash phase. Rinsing phase indicator. It flashes during rinse phase. Spinning and draining phase indicator. It flashes during spin and drain phase. Steam phase indicator. Anti-crease phase indicator. Eco programme indicator: it lights on when the selected programme and options have an eco profile.
-
Page 15: Dial And Buttons
The digital indicator can show: • Programme duration (e. g. The time shown when the programme is set could not correspond to effective duration and change after ProSense phase. • Maximum load. • Finish in time (e. g. • Cycle end ( ). •... - Page 16 7.3 Introduction When activated the relevant indicator is on. Follow the Pods manufacturer's dosage and storage recommendations. The options/functions are not selectable Put maximum two tablets or single-dose with all washing programmes. Check the detergents in the PODS® compartment in the compatibility between options/functions detergent dispenser drawer.
- Page 17 When the anti-crease movements stop and Pour the stain remover into compartment the door unlocks, the appliance proposes . The stain remover will be added in again the previous set programme. the appropriate phase of the washing programme. A small laundry load helps to reach better results.
-
Page 18: Settings
All spinning phases (intermediate spin and programme. Set this option for very final spin) are suppressed and the delicate fabrics. The rinses phase uses programme ends with water in the drum. more water for some washing This helps to reduce creasing. programmes As the programme is very quiet, it is suitable for use at night time when... -
Page 19: Before First Use
8.4 Operating Hours Counter It is possible to visualise the total operating If the procedure does not work (due to time of the appliance in hours, starting from timeout or wrong keys combination), the first switching on. This value will count switch the appliance off and repeat operating time of the cycles (does not include sequence from the beginning. - Page 20 Washing programmes Programme Programme description Cotton and mixed synthetic fabrics. Ideal to wash your daily load in a short time, for a better clothes care and good cleaning already at 30°C. MixLoad 69min Low energy cycle for cottons. Decreases temperature and extends time to reach good washing results.
- Page 21 Programme Programme description Outdoor Do not use fabric softener and make sure that there is no softener residue in the detergent dispenser. Outdoor clothing, technical, sport fabrics, waterproof and breathable jackets, shell jackets with a removable fleece or inner insulation. The recommended laundry load is 2.0 kg.
- Page 22 Programme temperature, maximum spin speed and maximum load Programme Default tempera‐ Reference spin speed Maximum load ture Spin speed range Temperature range 30 °C 1400 rpm 5.0 kg 60 °C - 30 °C 1400 rpm - 400 rpm MixLoad 69min 1400 rpm 10.0 kg 40 °C...
- Page 23 The Steam programmes do not remove particularly intense odour and do not perform any hygienic cycle. After the steam treatment the laundry can The fragrance is available on AEG web be humid. Hang items out for a few shop or by authorised dealer. minutes.
- Page 24 10.4 Options compatibility with programmes Spin ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Rinse Hold ■ ■ ■ Extra Silent ■ No Spin ■ ■ ■ Stains ■ ■...
-
Page 25: Daily Use
Programme Universal Liquid Univer‐ Liquid for col‐ Delicates Special oureds woollens powder 1) Wool ▲ ▲ 20min 3kg ▲ ▲ Outdoor ▲ ▲ Hygiene ▲ ▲ ▲ At temperature higher than 60 °C the use of powder detergent is recommended. ▲... - Page 26 11.3 Filling the detergent and 1. Open the detergent dispenser. additives 2. If a prewash phase is set, put the powder detergent in compartment 3. For main wash, chose the proper compartment depending on the type of - Compartment for detergent pods (Max 2 pods). When using detergent tablets, make sure that the detergent: Pods®...
- Page 27 In case a selection is not possible, no indicator comes on and an acoustic signal sounds. 11.5 Starting a programme Touch the Start/Pause button to start the programme. The related indicator stops flashing and stays In the display, the indicator of the operating c) Put the tablets in the compartment phase starts flashing.
- Page 28 After setting a washing programme, the icon lights up on the display if the The ProSense detection is carried out programme supports it. with complete washing programmes only (no skipping phase selected). After touching the Start/Pause button, the ProSense starts the laundry load detection: 1.
- Page 29 11.10 Cancelling a running 11.12 End of the programme programme When the programme has finished, the appliance stops automatically. The acoustic 1. Press the On/Off button to cancel the signals operate (if they are active). programme and to deactivate the appliance.
-
Page 30: Hints And Tips
• You do not use the appliance for 5 • If you have set , the appliance minutes before you touch the Start/Pause drains the water and spins. button. • If you have set , the appliance only drains the water. Press the On/Off button to activate the appliance again. - Page 31 – powder detergents (also tablets and single-dose detergents) for all types of fabric, excluding delicate. Prefer powder detergents containing bleach for whites and laundry sanitization, – liquid detergents (also single-dose detergents) , preferably for low temperature wash programmes (60 °C max) for all types of fabric, or special ones for woollens only.
-
Page 32: Care And Cleaning
laundry can then be washed at a lower In areas where the water is soft it is not temperature. necessary to use a water softener. • Set the maximum possible spin speed To find out the water hardness in your area, for the selected washing programme contact your local water authority. - Page 33 13.4 Descaling If the water in your area is hard or medium hard, we recommend that you use a water softener for washing machines. Regularly examine the drum to check for limescale. Clean it when needed, using ammonia cream The regular detergents already contain water cleanser agent without scratching the seal softening agents, but we recommend to run a surface.
- Page 34 4. Add a manually small quantity of powder detergent or a specific product into the empty drum, in order to rinse out any left residues. Occasionally, at the end of a cycle the display may show the icon : this is a recommendation to perform the “drum cleaning”.
- Page 35 CLICK 7. Make sure that all detergent residue is removed from the conveyor. Use only soft damp clothes. 8. Put bottom cover back to its position by 9. Reassembly the drawer as follows: aligning its holes on drawer hooks as a.
- Page 36 • The drum does not turn. • The appliance makes an unusual noise because of the blockage of the drain pump. • The display shows the alarm code WARNING! • Do not remove the filter while the appliance operates. • Do not clean the pump if the water in the appliance is hot.
- Page 37 13.10 Cleaning the inlet hose and the valve filter It is recommended to clean both the filters of the inlet hose and valve occasionally to remove any deposit, collected over the time: 1. Remove the inlet hose from the tap and clean the filter.
-
Page 38: Troubleshooting
13.12 Frost precautions If the appliance is installed in an area where the temperature can reach the values around 0° C or drop below, remove the remaining water from the inlet hose and the drain pump. 1. Disconnect the mains plug from the mains socket. - Page 39 With some problems, the display shows an alarm code and the Start/ Pause button may flash continuously: If the appliance is overloaded, remove some items from the drum and/or keep pressed the door while touching the Start/Pause button until the indicator stops flashing (see the picture below).
- Page 40 If the display shows other alarm codes, deactivate and activate the appliance. If the problem continues, contact the Authorised Service Centre. In case of different problem with the appliance check the table below for possible solutions. Problem Possible solution • Make sure that the mains plug is connected to the mains socket.
- Page 41 Problem Possible solution • Reduce the quantity of detergent or the number of tablets or single-dose deter‐ Too much foam in the drum during the washing cycle. gents. • Make sure you have used the detergent dispenser according the indications given in this user manual.
-
Page 42: Consumption Values
15. CONSUMPTION VALUES 15.1 Introduction See the web link www.theenergylabel.eu for detailed information about Energy Label. The QR code on the energy label supplied with the appliance provides a web link to the information related to the performance of the appliance in the EU EPREL database. Keep the energy label for reference together with the user manual and all other documents provided with this appliance. -
Page 43: Quick Guide
Power consumption in different modes Off (W) Stand-by (W) Delay start (W) 0.50 0.50 4.00 Time to Off/Standby mode is 15 minutes maximum. 15.4 Common programmes These values are indicative only. Programme rpm 1) Litres hh:mm °C Cottons 10.0 2.900 90.0 04:05 52.00... - Page 44 • Connect the mains plug to the mains • Pour the detergent and other treatments in socket. the proper compartment of the detergent • Open the water tap. dispenser. If you use tablets, please activate the Pods® option • Push the On/Off button to turn the •...
-
Page 45: Environmental Concerns
Programmes Load Product description 3.0 kg Cotton and synthetic lightly soiled items or once worn items. 20min 3kg 1.0 kg Cotton and synthetic items that need to de-wrinkle. Steam 2.0 kg Modern outdoor sporting garments. Outdoor 1.0 kg White cotton items. This programme removes more than 10.0 kg 99,99% of bacteria and viruses . - Page 48 157076210-A-272023...