Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Asus Pro WS W680-ACE
Summary of Contents for Asus Pro WS W680-ACE
- Page 1 Pro WS W680-ACE Pro WS W680-ACE IPMI...
- Page 2 Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.
-
Page 3: Table Of Contents
Contents Safety information ....................... v About this guide ......................vi Pro WS W680-ACE specifications summary ............vii Package contents ...................... xii Chapter 1: Product Introduction Before you proceed ................... 1-1 Motherboard layout ..................1-2 Chapter 2: Basic Installation Building your PC system ................2-1 2.1.1... - Page 4 Appendix Q-Code table ......................A-1 Notices ........................A-5 Warranty ......................... A-10 ASUS contact information ..................A-12 Service and Support ..................... A-12...
-
Page 5: Safety Information
Safety information Electrical safety • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device. -
Page 6: About This Guide
Refer to the following sources for additional information and for product and software updates. ASUS website The ASUS website (www.asus.com) provides updated information on ASUS hardware and software products. Optional documentation Your product package may include optional documentation, such as warranty flyers, that may have been added by your dealer. -
Page 7: Pro Ws W680-Ace Specifications Summary
Supports Intel Turbo Boost Technology 2.0 and Intel Turbo Boost Max ® ® Technology 3.0** * Refer to www.asus.com for CPU support list. ** Intel Turbo Boost Max Technology 3.0 support depends on the CPU types. ® Intel W680 Chipset Chipset ®... - Page 8 Pro WS W680-ACE specifications summary Intel W680 Chipset ® - M.2_2 slot (Key M), type 2242/2260/2280 (supports PCIe 4.0 x4 mode) - M.2_3 slot (Key M), type 2242/2260/2280/22110 (supports PCIe 4.0 x4 mode) - 4 x SATA 6Gb/s ports - 1 x SlimSAS Slot Support SlimSAS NVMe device (supports PCIe 4.0...
- Page 9 Pro WS W680-ACE specifications summary Fan and Cooling related 1 x 4-pin CPU Fan header 1 x 4-pin CPU OPT Fan header 1 x 4-pin W_PUMP+ header 3 x 4-pin Chassis Fan headers Power related 1 x 24-pin Main Power connector...
- Page 10 Pro WS W680-ACE specifications summary ASUS Q-Design - M.2 Q-Latch - Q-Code - Q-Connector - Q-DIMM - Q-LED (CPU [red], DRAM [yellow], VGA [white], Boot Device [yellow green]) - Q-Slot ASUS Thermal Solution - M.2 heatsink Special Features - VRM heatsink design...
- Page 11 • Specifications are subject to change without notice. Please refer to the ASUS website for the latest specifications. • For more information on downloading and installing drivers and utilities for your motherboard, please scan the QR code below:...
-
Page 12: Package Contents
Package contents Check your motherboard package for the following items. 1 x Pro WS W680-ACE IPMI motherboard or Motherboard 1 x Pro WS W680-ACE motherboard Cables 2 x SATA 6Gb/s cables 1 x IPMI expansion card 1 x BMC cable... -
Page 13: Chapter 1: Product Introduction
• The pin definitions in this chapter are for reference only. The pin names depend on the location of the header/jumper/connector. • For more information on installing your motherboard, please scan the QR code below: Pro WS W680-ACE Series... -
Page 14: Motherboard Layout
Motherboard layout Chapter 1: Product Introduction... - Page 15 21. System Panel header 1-23 22. Thermal Sensor header 1-24 23. Thunderbolt™ header 1-25 24. TPM header 1-26 25. Q-Code LED 1-26 26. Q LEDs 1-27 27. BIOS FlashBack™ LED 28. 8-pin Power Plug LED 1-28 Pro WS W680-ACE Series...
- Page 16 Contact your retailer immediately if the PnP cap is missing, or if you see any damage to the PnP cap/socket contacts/motherboard components. ASUS will shoulder the cost of repair only if the damage is shipment/ transit-related.
- Page 17 (Double Data Rate 5) memory modules. A DDR5 memory module is notched differently from a DDR, DDR2, DDR3, or DDR4 module. DO NOT install a DDR, DDR2, DDR3, or DDR4 memory module to the DDR5 slot. Recommended memory configurations Pro WS W680-ACE Series...
- Page 18 (D/C) from the same vendor. Check with the vendor to get the correct memory modules. • Visit the ASUS website for the latest QVL. Chapter 1: Product Introduction...
- Page 19 For full details on the PCIe bifurcation, you may visit the support site at https://www.asus.com/support/FAQ/1037507/. • The Hyper M.2 X16 series card is sold separately. • Adjust the PCIe bifurcation under BIOS settings. Please refer to the following tables for the recommended VGA configuration and PCIe bifurcation configuration. Pro WS W680-ACE Series...
- Page 20 Recommended VGA configuration Slot Description Single VGA Dual VGA Triple VGA Quad VGA PCIEX16(G5)_1 PCIEX16(G5)_2 PCIEX16(G3)_1 PCIEX16(G3)_2 • Connect a chassis fan to the chassis fan connectors when using multiple graphics cards for better thermal environment. • When installing a dual VGA card, we recommend selecting a chassis case which supports 7 or more expansion slots PCIe bifurcation &...
- Page 21 For water cooling kits, connect the pump connector to the W_PUMP+ header. Header Max. Current Max. Power Default Speed Shared Control CPU_FAN Q-Fan Controlled CPU_OPT Q-Fan Controlled CHA_FAN1 Q-Fan Controlled CHA_FAN2 Q-Fan Controlled CHA_FAN3 Q-Fan Controlled W_PUMP+ Full Speed Pro WS W680-ACE Series...
- Page 22 Power connectors These Power connectors allow you to connect your motherboard to a power supply. The power supply plugs are designed to fit in only one orientation, find the proper orientation and push down firmly until the power supply plugs are fully inserted. Ensure to connect the 8-pin power plug, or both the 8-pin and 4-pin power plugs.
- Page 23 - M.2_3 supports PCIE 4.0 x4 mode M Key design and type 2242 / 2260 / 2280 / 22110 storage devices. • Intel ® Rapid Storage Technology supports PCIe RAID 0/1/5/10, SATA RAID 0/1/5/10. The M.2 SSD module is purchased separately. Pro WS W680-ACE Series 1-11...
- Page 24 1, 5, and 10 configuration with the Intel Rapid Storage Technology through the onboard ® Intel W680 chipset. ® Before creating a RAID set, refer to the RAID Configuration Guide. You can download the RAID Configuration Guide from the ASUS website. Chapter 1: Product Introduction 1-12...
- Page 25 USB 3.2 Gen 2x2 ports on the front panel. The USB 3.2 ® Gen 2x2 Type-C connector provides data transfer speeds of up to 20 Gb/s. ® The USB 3.2 Gen 2x2 Type-C module is purchased separately. ® Pro WS W680-ACE Series 1-13...
- Page 26 USB 3.2 Gen 1 header The USB 3.2 Gen 1 header allows you to connect a USB 3.2 Gen 1 module for additional USB 3.2 Gen 1 ports. The USB 3.2 Gen 1 header provides data transfer speeds of up to 5 Gb/s. The USB 3.2 Gen 1 module is purchased separately.
- Page 27 2.0 ports. The USB 2.0 header provides data transfer speeds of up to 480 MB/s connection speed. DO NOT connect a 1394 cable to the USB connectors. Doing so will damage the motherboard! The USB 2.0 module is purchased separately. Pro WS W680-ACE Series 1-15...
- Page 28 The BMC header allows you to connect and support an IPMI card. • The IPMI card is purchased separately. • For more information on the installation and information regarding the IPMI card, please visit www.asus.com. Chapter 1: Product Introduction 1-16...
- Page 29 If the steps above do not help, remove the onboard button cell battery and short the two pins again to clear the CMOS RTC RAM data. After clearing the CMOS, reinstall the button cell battery. Pro WS W680-ACE Series 1-17...
- Page 30 COM Port connector The COM (Serial) Port connector allows you to connect a COM port module. Connect the COM port module cable to this connector, then install the module to a slot opening on the system chassis. The COM port module is purchased separately. Chapter 1: Product Introduction 1-18...
- Page 31 Press the FlexKey button to reboot the system. You may also configure the button and assign a quick access feature such as activating Safe Boot to the button. This button set to [Reset] by default. You can assign a different function to this button in the BIOS settings. Pro WS W680-ACE Series 1-19...
- Page 32 Front Panel Audio header The Front Panel Audio header is for a chassis-mounted front panel audio I/O module that supports HD Audio. Connect one end of the front panel audio I/O module cable to this header. We recommend that you connect a high-definition front panel audio module to this connector to avail of the motherboard’s high-definition audio capability.
- Page 33 The LPT and Q-Code Switch header allows you to enable either LPT (Line Printing Thermal) connector or Q-Code. M.2 slot (Key E) The M.2 Wi-Fi slot allows you to install an M.2 Wi-Fi module (E-key, type 2230; PCIe interface). The M.2 Wi-Fi module is purchased separately. Pro WS W680-ACE Series 1-21...
- Page 34 Start button Press the Power button to power up the system, or put the system into sleep or soft- off mode (depending on the operating system settings). Chapter 1: Product Introduction 1-22...
- Page 35 The 2-pin connector allows you to connect the chassis-mounted intrusion detection sensor or switch. The chassis intrusion sensor or switch sends a high-level signal to the connector when a chassis component is removed or replaced, the signal is then generated as a chassis intrusion event. Pro WS W680-ACE Series 1-23...
- Page 36 Thermal Sensor header The Thermal Sensor header allows you to connect a sensor to monitor the temperature of the devices and the critical components inside the motherboard. Connect the thermal sensor and place it on the device or the motherboard’s component to detect its temperature.
- Page 37 Please visit the official website of your purchased Thunderbolt™ card for more details on compatibility. The Thunderbolt™ card can only be used when installed to the PCIEX16(G3)_2 slot. Ensure to install your Thunderbolt™ card to the PCIEX16(G3)_2 slot. Pro WS W680-ACE Series 1-25...
- Page 38 TPM header The TPM header allows you to connect a TPM module, which securely stores keys, digital certificates, passwords, and data. A TPM system also helps enhance network security, protect digital identities, and ensures platform integrity. The TPM module is purchased separately. Q-Code LED The Q-Code LED design provides you with a 2-digit error code that displays the system status.
- Page 39 BIOS FlashBack™ LED The BIOS FlashBack™ LED lights up or blinks to indicate the status of the BIOS FlashBack™. Refer to the BIOS update utility section for more information on using the BIOS FlashBack™ feature. Pro WS W680-ACE Series 1-27...
- Page 40 8-pin Power Plug LED The 8-pin Power Plug LED lights up to indicate that the 8-pin power plug is not connected. Chapter 1: Product Introduction 1-28...
-
Page 41: Building Your Pc System
CPU designed for LGA1155, LGA1156, LGA1151, and LGA1200 sockets on the LGA1700 socket. • ASUS will not cover damages resulting from incorrect CPU installation/removal, incorrect CPU orientation/placement, or other damages resulting from negligence by the user. Take caution when lifting the load... - Page 42 Ensure to remove the CPU Socket lever protector on the lever latch before locking the lever latch under the retention tab. Failure to do so may cause damages to your system when installing the cooling system. Chapter 2: Basic Installation...
-
Page 43: Cooling System Installation
• Ensure to remove the CPU Socket lever protector on the lever latch before installing the cooling system, failure to do so may cause damages to your system. To install a CPU heatsink and fan assembly Pro WS W680-ACE Series... - Page 44 Intel 600 series ® motherboard. • Additional holes for LGA1200 compatible cooling systems are also available on ASUS’ Intel 600 series motherboards, ® however, we still strongly advise consulting with your cooling system vendor or manufacturer on the compatibility and functionality of the cooling system.
- Page 45 • If you wish to install an AIO cooler, we recommend installing the AIO cooler after installing the motherboard into the chassis. CPU_FAN W_PUMP+/ CPU_OPT AIO_PUMP Pro WS W680-ACE Series...
-
Page 46: Dimm Installation
2.1.3 DIMM installation To remove a DIMM Chapter 2: Basic Installation... -
Page 47: Installation
• Use a Phillips screwdriver when removing or installing the screws or screw stands mentioned in this section. • The M.2 is purchased separately. Completely loosen the screws on the heatsinks. Lift and remove the heatsinks. Pro WS W680-ACE Series... - Page 48 Install your M.2 to your M.2 slot. The steps may differ between installing M.2 of different lengths, please refer to the different types and their installation steps below: • To install an M.2 to M.2_1 slot For 2280 length (optional) Install the bundled rubber for M.2 if you are installing a single sided M.2 storage device.
- Page 49 Follow this step only if you wish to install an M.2 to type 2242. Install the bundled screw stand to the M.2 length screw hole you wish to install your M.2 to. Install your M.2 to the M.2 slot. Secure your M.2 using the bundled screw stand’s screw. Pro WS W680-ACE Series...
- Page 50 • To install an M.2 to M.2_2 slot For 2242, 2260, 2280 length Install the bundled screw stand to the M.2 length screw hole you wish to install your M.2 to. Install your M.2 to the M.2 slot. Secure your M.2 using the bundled screw stand’s screw. Chapter 2: Basic Installation 2-10...
- Page 51 Follow step A and B only when you wish to install an 2242, 2260, or 22110 length M.2. Rotate and adjust the M.2 Q-latch so that the handle points away from the M.2 slot. Install your M.2 to the M.2 slot. Rotate the M.2 Q-Latch clockwise to secure the M.2 in place. Pro WS W680-ACE Series 2-11...
- Page 52 Remove the plastic film from the thermal pads on the bottom of the heatsinks. If the thermal pad on the M.2 heatsink becomes damaged, we recommend replacing it with a thermal pad with a thickness of 1.25mm. Replace the heatsinks. Secure the heatsinks using the screws on the heatsink.
-
Page 53: Motherboard Installation
Place the motherboard into the chassis, ensuring that its rear I/O ports are aligned to the chassis’ rear I/O panel. Place nine (9) screws into the holes indicated by circles to secure the motherboard to the chassis. DO NOT over tighten the screws! Doing so can damage the motherboard. Pro WS W680-ACE Series 2-13... -
Page 54: Atx Power Connection
2.1.6 ATX power connection Ensure to connect the 8-pin power plug, or both the 8-pin and 4-pin power plugs. Chapter 2: Basic Installation 2-14... - Page 55 The PCIE_6P_PWR connector provides additional power for your PCIe X16 slots. Pro WS W680-ACE Series 2-15...
-
Page 56: Sata Device Connection
2.1.7 SATA device connection 2.1.8 SlimSAS connection Chapter 2: Basic Installation 2-16... -
Page 57: Front I/O Connector
This connector will only fit in one orientation. Push the connector until it clicks into place. To install USB 3.2 Gen 1 connector To install USB 2.0 connector USB 2.0 USB 3.2 Gen 1 To install front panel audio connector AAFP Pro WS W680-ACE Series 2-17... -
Page 58: Expansion Card Installation
2.1.10 Expansion card installation To install PCIe x16 cards To install PCIe x1 cards Chapter 2: Basic Installation 2-18... - Page 59 The TypeC_1 port can support up to 20V devices, and the TypeC_2 port can support up to 9V devices when the 6-pin PCIe power connector is connected. • Please visit the official website of your purchased Thunderbolt™ card for more details on compatibility. Pro WS W680-ACE Series 2-19...
-
Page 60: M.2 Wi-Fi Module And Antenna Installation
2.1.11 M.2 Wi-Fi module and antenna installation Installing the M.2 W-Fi Module • Ensure that the ASUS Wi-Fi moving antenna is securely installed to the Wi-Fi ports. • Ensure that the antenna is at least 20 cm away from all persons. -
Page 61: Bios Update Utility
• Updating BIOS may have risks. If the BIOS program is damaged during the process and results to the system’s failure to boot up, please contact your local ASUS Service Center. Pro WS W680-ACE Series... - Page 62 For more information on using the BIOS FlashBack™ feature, please refer to https://www.asus.com/support/, or by scanning the QR code below. Chapter 2: Basic Installation 2-22...
-
Page 63: Motherboard Rear And Audio Connections
We strongly recommend that you connect your devices to ports with matching data transfer rate. For example connecting your USB 3.2 Gen 1 devices to USB 3.2 Gen 1 ports for faster and better performance for your devices. Pro WS W680-ACE Series 2-23... - Page 64 * Intel 2.5Gb Ethernet port LED indications ® ACT/LINK SPEED Activity Link LED Speed LED Status Description Status Description No link No link GREEN Linked 100 Mbps / 10 Mbps LAN port connection BLINKING Data activity GREEN 2.5 Gbps connection ORANGE 1 Gbps connection ** Audio 2, 4, 5.1 or 7.1-channel configuration...
-
Page 65: Audio I/O Connections
2.3.2 Audio I/O connections Audio I/O ports Connect to Headphone and Mic Connect to 2-channel Speakers Connect to 4-channel Speakers Pro WS W680-ACE Series 2-25... - Page 66 Connect to 5.1-channel Speakers Connect to 7.1-channel Speakers Chapter 2: Basic Installation 2-26...
-
Page 67: Starting Up For The First Time
While the system is ON, press the power button for less than four seconds to put the system on sleep mode or soft-off mode, depending on the BIOS setting. Press the power button for more than four seconds to let the system enter the soft-off mode regardless of the BIOS setting. Pro WS W680-ACE Series 2-27... - Page 68 Chapter 2: Basic Installation 2-28...
-
Page 69: Chapter 3: Bios And Raid Support
BIOS and RAID Support Knowing BIOS The new ASUS UEFI BIOS is a Unified Extensible Interface that complies with UEFI architecture, offering a user-friendly interface that goes beyond the traditional keyboard- only BIOS controls to enable a more flexible and convenient mouse input. You can easily navigate the new UEFI BIOS with the same smoothness as your operating system. -
Page 70: Bios Setup Program
BIOS setup program Use the BIOS Setup to update the BIOS or configure its parameters. The BIOS screen include navigation keys and brief onscreen help to guide you in using the BIOS Setup program. Entering BIOS at startup To enter BIOS Setup at startup, press <Delete> or <F2> during the Power-On Self Test (POST). -
Page 71: Asus Ez Flash 3
ASUS EZ Flash 3 The ASUS EZ Flash 3 feature allows you to update the BIOS without using an OS-based utility. Ensure to load the BIOS default settings to ensure system compatibility and stability. Select the Load Optimized Defaults item under the Exit menu or press hotkey <F5>. -
Page 72: Asus Crashfree Bios 3
ASUS CrashFree BIOS 3 The ASUS CrashFree BIOS 3 utility is an auto recovery tool that allows you to restore the BIOS file when it fails or gets corrupted during the updating process. You can restore a corrupted BIOS file using a USB flash drive that contains the BIOS file. -
Page 73: Raid Configurations
For more information on configuring your RAID sets, please refer to the RAID Configuration Guide which you can find at https://www.asus.com/support, or by scanning the QR code. RAID definitions RAID 0 (Data striping) optimizes two identical hard disk drives to read and write data in parallel, interleaved stacks. - Page 74 Chapter 3: BIOS Setup...
-
Page 75: Appendix
CPU self test failed or possible CPU cache error CPU micro-code is not found or micro-code update is failed Internal CPU error Reset PPI is not available Reserved for future AMI error codes 5C – 5F (continued on the next page) Pro WS W680-ACE Series... -
Page 76: Q-Code Table
Q-Code table Code Description S3 Resume is stared (S3 Resume PPI is called by the DXE IPL) S3 Boot Script execution Video repost OS S3 wake vector call E4 – E7 Reserved for future AMI progress codes S3 Resume Failed S3 Resume PPI not Found S3 Resume Boot Script Error S3 OS Wake Error... - Page 77 Reserved for ASL (see ASL Status Codes section below) Ready To Boot event Legacy Boot event Exit Boot Services event Runtime Set Virtual Address MAP Begin Runtime Set Virtual Address MAP End Legacy Option ROM Initialization System Reset (continued on the next page) Pro WS W680-ACE Series...
- Page 78 Q-Code table Code Description USB hot plug PCI bus hot plug Clean-up of NVRAM Configuration Reset (reset of NVRAM settings) Reserved for future AMI codes B8– BF CPU initialization error System Agent initialization error PCH initialization error Some of the Architectural Protocols are not available PCI resource allocation error.
-
Page 79: Notices
Notices FCC Compliance Information Responsible Party: Asus Computer International Address: 48720 Kato Rd., Fremont, CA 94538, USA Phone / Fax No: (510)739-3777 / (510)608-4555 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. - Page 80 Compliance Statement of Innovation, Science and Economic Development Canada (ISED) This device complies with Innovation, Science and Economic Development Canada licence exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
- Page 81 ASUS products sold in Vietnam, on or after September 23, 2011,meet the requirements of the Vietnam Circular 30/2011/TT-BCT. Các sản phẩm ASUS bán tại Việt Nam, vào ngày 23 tháng 9 năm2011 trở về sau, đều phải đáp ứng các yêu cầu của Thông tư 30/2011/TT-BCT của Việt Nam.
- Page 82 ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials.
- Page 83 Français AsusTek Computer Inc. déclare par la présente que cet appareil est conforme aux critères essentiels et autres clauses pertinentes des directives concernées. La déclaration de conformité de l’UE peut être téléchargée à partir du site Internet suivant : www.asus.com/support.
-
Page 84: Warranty
• ASUS offers a voluntary manufacturer’s Commercial Guarantee. • ASUS dragovoljno nudi komercijalno proizvođačko jamstvo. • ASUS reserves the right to interpret the provisions of the ASUS • ASUS zadržava prava na tumačenje odredbi ASUS komercijalnog Commercial Guarantee. jamstva. •... - Page 85 • ASUS tilbyr som produsent en frivillig kommersiell garanti. • Bảo hành thương mại này của ASUS được cung cấp độc lập và ngoài • ASUS forbeholder seg retten til å tolke bestemmelsene i ASUS sin Bảo đảm pháp lý theo luật định và không có cách nào ảnh hưởng đến kommersielle garanti.
-
Page 86: Asus Contact Information
Address: 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112 ASUS COMPUTER INTERNATIONAL (America) Address: 48720 Kato Rd., Fremont, CA 94538, USA ASUS COMPUTER GmbH (Germany and Austria) Address: Harkortstrasse 21-23, 40880 Ratingen, Germany ASUSTeK (UK) LIMITED Address: 1st Floor, Sackville House, 143-149 Fenchurch Street, London, EC3M 6BL,...