Safety Precautions The following safety precautions must be taken when installing and using your air conditioner. The air conditioner must be plugged into its own specific power source, which must be installed in compliance with national wiring, earthing and safety regulations. Depending on national regulations and your specific installation, you may need to install: A circuit breaker For further information on electrical requirements, contact a professional electrician.
Contents REPARING ONDITIONER Safety Precautions ..................Air Conditioning Unit - Main Parts, Buttons and Display ....... Remote Control Buttons ................. Getting Started ....................Inserting the Remote Control Batteries ............PERATING ONDITIONER Cooling Your Room ..................Airing Your Room ................... Adjusting the Air Flow Direction Horizontally ..........10 Adjusting the Air Flow Direction Vertically ............
Air Conditioning Unit - Main Parts, Buttons and Display The design and shape are subject to change according to the model. Inner air flow blades (right/left orientation) Air outlet Air inlet (inside) Outer air flow blades (up/down orientation) Air filter (The air filter is Air inlet (Outside) located inside)
Getting Started You have just purchased a window-type room air conditioner and it has been installed by your installation specialist. Your Owner’s Instructions contain valuable information on using your air conditioner. Please take the time to read them as they will help you take full advantage of the unit’s functions. This Owner’s Instructions is just for using your air conditioner correctly.
Inserting the Remote Control Batteries You must insert or replace the remote control batteries when: You purchase the air conditioner The remote control does not work correctly Use two AAA, LR03 1.5 V batteries. Do not use old batteries or different kinds of batteries together. Batteries may be completely discharged after 12 months, even if they have not actually been used.
Cooling Your Room You must select the Cool mode if you wish to lower the temperature in your room. You can also set the fan speed. Remote Control Control Panel If necessary, press the (On/Off) button. Result: The operating mode indicator (COOL or FAN) on the unit comes on.
Airing Your Room If the atmosphere in your room is stale, you can air it using the Fan feature and if necessary, evacuate the stale air outside. If you wish to evacuate stale air outside, push the ventilation lever on the front of the unit to the right and the open position ( Result: The air inside the room circulates and stale air is evacuated outside.
Adjusting the Air Flow Direction Horizontally Depending on the position of the unit in your room, you can adjust the orientation of the inner air flow blades on the right-hand side of the Remote Control Control Panel unit, thus increasing the efficiency of the air conditioner. Press the on the unit) button on the remote control.
Setting the On timer The On Timer enables you to switch on the air conditioner automatically after a given period time. You can set the period of time from 1 hour to 24 hours. Remote Control You can select the On timer only when the air conditioner is off. Control Panel Check that the air conditioner has been switched off;...
Setting the Off Timer The Off Timer enables you to switch off the air conditioner automatically after a given period of time. You can set the period of time from 1 hour to 24 hours. Remote Control Control Panel You can select the Off timer only when the air conditioner is on. Check that the air conditioner has been switched on;...
Setting the Sleep timer The Sleep Timer can be used when you are cooling your room to switch the air conditioner off automatically after a period of 8 hours. Remote Control Control Panel If you wish to switch the unit off at a specific time, refer to page 12. Make sure that you have selected either COOL mode.
Selecting Energy Saving mode If you wish to save energy when using your air conditioner, Remote Control Control Panel select the energy saving mode with the Energy Saver button. To select the energy saving mode, press the Energy Saver button on the remote control or unit one or more times until the Energy Saver indicator lights up.
Cleaning Your Air Conditioner models) Be sure to clean the air filter periodically to maintain the air conditioner in the best condition for a long period of time. When cleaning the air conditioner, turn it off and pull out IMPORTANT the power plug.
Page 16
Cleaning Your Air Conditioner AA/GA models) Be sure to clean the air filter periodically to maintain the air conditioner in the best condition for a long period of time. When cleaning the air conditioner, turn it off and pull out the power plug.
Solving Common Problems Before contacting the after-sales service, perform the following simple checks. They may save you the time and expense of an unnecessary service call. Problem Explanation/Solution The air conditioner does not Check that the circuit breaker used for the air conditioner has not operate at all been triggered.
Technical Specifications Design and specifications are subject to change without notice. Model Power Supply AA/AB/AC 115V~, 60Hz BA/BB/BC/BD 220V(230V)~, 60Hz CA/CB/CC/CD 230-208V~, 60Hz DA/DB 200-220V~, 50Hz EA/EB/EC 220-240V~, 50Hz...
Installation (for 60Hz) Electrical Requirements For personal safety: This appliance must be properly grounded. Do not, under any circumstances, cut or remove the third grounding prong from the power cord. We recommend that you do not use an extension cord or an adapter plug with this appliance.
Page 20
Installation Before installation, be sure to check the installation area or the air conditioner, and drain hose. Checkpoints prior to installation Check the cabinet and front grille of the unit for any harmful defects such as scratches. Be sure to check the power supply. - Refer to the specifications on the label attached to the unit.
Page 21
In some region, drain tube and drain pan may not be supplied. Please contact the sales agent. Installation of the Drain Tube Fix the drain tube as shown in the figure. Rear Rubber cap Gasket Drain Tube Screws(2EA) Installation of the Drain Pan The procedure for installing the drain pan should be determined by the condition of the installing area.
Page 22
THIS AIR CONDITIONER IS MANUFACTURED BY: ESTE ACONDICIONADOR DE AIRE HA SIDO FABRICADO POR: CE CLIMATISEUR EST FABRIQUÉ PAR: ESTE APARELHO DE AR CONDICIONADO É FABRICADO POR: QUESTO CONDIZIONATORE D’ARIA È PRODOTTO DA: Printed in Korea...