Table of Contents
Advertisement
en Before using for the first time
Before using for the first time
9 Before using for the
first time
Before using for the first time
9.1 Performing the initial con-
figuration
On initial start-up or after a reset to
the factory settings, you will need to
make settings.
Tip: Connect your appliance to a mo-
bile device. You can conveniently
change all settings via the
Home Connect app.
Requirement: The appliance has
been installed and connected.
→ Page 11
Add special salt. → Page 23
1.
Add rinse aid. → Page 25
2.
Switch on the appliance.
3.
→ Page 31
Setting the water softening system.
4.
→ Page 23
Set the amount of rinse aid to be
5.
dispensed. → Page 25
10.1 Overview of water hardness settings
You can find an overview of the water hardness values that can be selected
here.
You can find out how hard your water is from your local water company or by
using a water hardness tester.
Water hardness
°E
0 - 8
9 - 10
11 - 12
13 - 15
16 - 20
21 - 26
27 - 38
22
Hardness range
Soft
Soft
Medium
Medium
Medium
Hard
Hard
Add detergent → Page 26.
6.
Start the Programme with the
7.
highest cleaning temperature
without tableware.
To remove any marks from water
or other residues, we recommend
you operate the appliance without
tableware before using it for the
first time.
Tip: You can change these settings
and other Basic settings → Page 33
at any time.
Water softening system
10 Water softening sys-
tem
Hard water leaves limescale on the
Water softening system
tableware as well as the washing
tank, and parts of the appliance may
become blocked.
To ensure good dishwashing results,
you can treat the water with special
salt and the water softening system.
To avoid damage to the appliance,
water with a hardness above 9 °E
must be softened.
mmol/l
0 - 1.1
1.2 - 1.4
1.5 - 1.8
1.9 - 2.1
2.2 - 2.9
3.0 - 3.7
3.8 - 5.4
Setting value
H00
H01
H02
H03
H04
H05
H06
Advertisement
Table of Contents
