Advertisement
Quick Links
1. These specification sheets include materials protected under copyright of Sharp Corporation ("Sharp").
Please handle with great cares and do not reproduce or cause anyone to reproduce them without Sharp's consent.
2. When using this Sharp product, please observe the absolute maximum ratings, other conditions and instructions for use
described in the specification sheets, as well as the precautions mentioned below.
Sharp assumes no responsibility for any damages resulting from use of the product which does not comply with absolute
maximum ratings, other conditions and instructions for use included in the specification sheets, and the precautions
mentioned below.
(Precautions)
(1) In making catalogue or instruction manual based on the specification sheets, please verify the validity of the catalogue
or instruction manuals after assembling Sharp products in customer's products at the responsibility of customer.
(2) This Sharp product is designed for use in the following application areas ;
• Computers • OA equipment • Telecommunication equipment (Terminal) • Measuring equipment
• Tooling machines ・Audio visual equipment • Home appliances
If the use of the Sharp product in the above application areas is for equipment listed in paragraphs (3) or (4),
please be sure to observe the precautions given in those respective paragraphs.
(3) Appropriate measures, such as fail-safe design and redundant design considering the safety design of the overall
system and equipment, should be taken to ensure reliability and safety when Sharp product is used for equipment
in responsibility of customer which demands high reliability and safety in function and precision, such as ;
• Transportation control and safety equipment (aircraft, train, automobile etc.)
• Traffic signals • Gas leakage sensor breakers • Rescue and security equipment
• Other safety equipment
(4)Sharp product is designed for consumer goods and controlled as consumer goods in production and quality.
Please do not use this product for equipment which require extremely high reliability and safety in function and
precision, such as ;
• Space equipment • Telecommunication equipment (for trunk lines)
• Nuclear power control equipment • Medical equipment
(5) Please contact and consult with a Sharp sales representative if there are any question regarding interpretation of
the above four paragraphs.
3. Disclaimer
The warranty period for Sharp product is one (1) year after shipment.
During the period, if there are any products problem, Sharp will repair (if applicable), replace or refund.
Except the above, both parties will discuss to cope with the problems.
The failed Sharp product after the above one (1) year period will be coped with by Sharp, provided that both parties
shall discuss and determine on sharing responsibility based on the analysis results thereof subject to the above scope
of warranty.
The warranty described herein is only for Sharp product itself which are purchased by or delivered to customer.
Damages arising from Sharp product malfunction or failure shall be excepted.
Sharp will not be responsible for the Sharp product due to the malfunction or failures thereof which are caused by:
(1) storage keep trouble during the inventory in the marketing channel.
(2) intentional act, negligence or wrong/poor handling.
(3) equipment which Sharp products are connected to or mounted in.
(4) disassembling, reforming or changing Sharp products.
(5) installation problem.
(6) act of God or other disaster (natural disaster, fire, flood, etc.)
(7) external factors (abnormal voltage, abnormal electromagnetic wave, fire, etc.)
(8) special environment (factory, coastal areas, hotspring area, etc.)
(9) phenomenon which cannot be foreseen based on the practical technologies at the time of shipment.
(10) the factors not included in the product specification sheet.
4. Please contact and consult with a Sharp sales representative for any questions about Sharp product.
GP2AP01VT10F
1 / 18
Advertisement
Summary of Contents for Sharp GP2AP01VT10F
- Page 1 • Tooling machines ・Audio visual equipment • Home appliances If the use of the Sharp product in the above application areas is for equipment listed in paragraphs (3) or (4), please be sure to observe the precautions given in those respective paragraphs.
- Page 2 IEC 60825-1:2014. The laser output will remain within Class 1 limits as long as the Sharp recommended device settings are used and the operating conditions specified in this datasheet are respected. The laser output power must not be increased by any means and no optics should be used with the intention of focusing the laser beam.
- Page 3 Moreover, please do not touch a surface. 2) Please take proper methods to prevent ESD. The IC built in GP2AP01VT10F is ESD-sensitive because it is fabricated by sub-micron CMOS process. For example, in handling GP2AP01VT10F, human body and soldering iron etc. should be grounded.
- Page 4 NMOS open-drain output. 8) Block diagram AVDDVCSEL AVSSVCSEL (GND2) XSHUT ① ⑤ ② ③ ④ GP2AP01VT00F module ⑥ (GND3) GP2AP01VT10F silicon (GND4) ⑫ IR Emitter Ranging IR emitter driver ⑧ ⑪ ⑩ ⑨ ⑦ AVDD GPIO1 4 / 18...
- Page 5 GP2AP01VT10F 9) Foot pattern of PCB (1)Dimensions are shown for reference. (Top View) Name Function ⑦ ⑪ ① AVDDVCSEL Supply Voltage for VCSEL ② AVSSVCSEL Ground for VCSEL ● ③ Ground ④ GND2 Ground ① ⑤ ⑤ XSHUT Digital I ⑥...
- Page 6 GP2AP01VT10F 10) Pin Description Pin Name Functional description Equivalent Internal Circuit AVDD Power Supply AVDD AVDDVCSEL VCSEL Power Supply AVDDVCSEL AVSSVCSEL Ground AVSSVCSEL VCSEL Ground I2C serial data line Internal Regulater The terminal is pulled-up to V I2C serial clock line...
- Page 7 GP2AP01VT10F 2. Outline Dimensions 7 / 18...
- Page 8 GP2AP01VT10F 3. Ratings and Characteristics 3.1 Absolute Maximum Ratings Parameter Symbol Rating Unit Remarks Power supply voltage -0.5 to 3.6 VCSELvoltage -0.5 to 3.6 VCSEL I2C voltage -0.5 to 3.6 ℃ Operating temperature Topr -20 to 70 ℃ Storage temperature...
- Page 9 GP2AP01VT10F 3.3.3 Ranging Characteristics Ta=25℃, VDD=V =2.8V,and after the calibration VCSEL (Unless otherwise specified, the external circuit constants follow the recommended external circuit of page 3.) Parameter Symbol Min. Typ. Max. Unit Remarks － － Min Range distance & accuracy Rmin ※...
- Page 10 GP2AP01VT10F 4. Reliability The reliability of products shall satisfy items listed below. Confidence level : 90% LTPD : 10 or 20 Failure Judgment Samples (n) Test Items Test Condition Criteria Defective (C) > U ×1.2 * Temperature 1 cycle -40℃(30min) to +85℃(30min) CC_VDD Ｐ...
- Page 11 GP2AP01VT10F 5. Outgoing inspection (1) Inspection lot Inspection shall be carried out per each delivery lot. (2) Inspection method A single sampling plan, normal inspection level Ⅱbased on ISO 2859 shall be adopted. Parameter Inspection items and test method AQL(%) 1.
- Page 12 GP2AP01VT10F Precautions for Soldering (1)In case of solder reflow three Reflow is allowed only at the temperature and the time within the temperature profile as shown in the figure below. This Profile temperature is the sensor surface package temperature. Reflow interval shall be within 7days under conditions, 10 to 30℃, 70%RH or less.
- Page 13 GP2AP01VT10F Taping specifications 1. Application This packing specification sheets specify the taping specifications for GP2AP01VT10F. 2. Taping method 2.1.Tape structure and Dimensions (Refer to page 14.) The tape shall have a structure in which a cover tape is sealed pressed on the carrier tape of conductive Polycarbonate.
- Page 14 GP2AP01VT10F 7. Tape and Real structures 7.1 Tape structure and Dimensions Tape outline drawing 14 / 18...
- Page 15 GP2AP01VT10F 7.2 Reel structure and Dimensions Symbol Check word Unit φ180±2.0 φ60±1.0 φ13±0.2 φ21±0.8 13.5±1.0 17.1±1.0 2±0.5 7.3. Direction of product insertion Indicator Pull out direction Detector Static electricity label MSL3、ROHS label IR EMITTER Barcode label (Based on EIAJ C-3)
- Page 16 GP2AP01VT10F Taping moisture-proof packing 1. Application This packing specification sheets apply to the moist-proof packing for the GP2AP01VT10F in the taping package. 2. Packaging specifications 2.1 Packaging material Counter measure for Name Material Quantity Aluminum laminate bag Aluminum polyethylene Conductive type...
- Page 17 GP2AP01VT10F 3.4 Placement of reels in an oven 1) Please hang reels by using a center hole for fixing the reel. Please keep some space between reels for better air rotation in the oven. Please do not lay a reel down in the oven to avoid any damages for the tape edge and the flange of reel.
- Page 18 GP2AP01VT10F 4.Packing Inner Packing ① Inner Packaging drawing Cover tape 1,000pcs products 2,000pcs products Carrier tape ② Inner packing material :・ Reel(PPE) ・ Carrier tape (PC) ・ Cover tape(PET) ③ Quantity : 2,000pcs./Reel 1,000pcs. /Reel Taping reel containing products Outer Packaging EIAJ C-3 Label ①...