Sony SLV-R1000 Operating Instructions Manual page 24

Hide thumbs Also See for SLV-R1000:

Table of Contents

Your VCR includes a Cable Box Control feature that allows

the VCR to control channel selection on most cable boxes.

Compatible cable box brands are shown on page 26.

The CABLE BOX CONTROL must be set to "ON", and the

code number and the output channel must be set to match

your cable box before you can use it. For details on

connecting your cable box to the VCR to control the cable

box with the Remote Commander, please refer to Hookup 2

on page 8.

When CABLE BOX CONTROL is set to "ON", the VCR will

control the cable box channel for timer recording. In addition,

you can use the VCR's Remote Commander to change

channels on the cable box whenever the cable box and the

VGR are turned on.

Note

Do not place the cable box on top of the VCR. For best

results, place the cable box as far away from the VCR as

possible.

B 4

Preparation

Note on setting the cable box and Cable Mouse

Make sure that the Cable Mouse is positioned near to and

above the sensor on the cable box so that the signal from

the Cable Mouse is received correctly.

The cable box should not be too close to the VCR.

Table of Contents