Table of Contents
Advertisement
Starting the Engine
Note:
A warm or hot engine may not require choking.
Important:
Do not engage the starter for more
than 5 seconds at a time. Engaging the starter
motor for more than 5 seconds can damage the
starter motor. If the engine fails to start, wait 10
seconds before operating the engine starter again.
Figure 17
Shutting Off the Engine
1.
Disengage the blades by moving the
blade-control switch to the O
14).
2.
Engage the parking brake; refer to
(page
11).
3.
Move the throttle lever to between the half and
full throttle position.
4.
Turn the key to the O
the key.
position
(Figure
FF
Park Position
position and remove
FF
CAUTION
Children or bystanders may be injured if they
move or attempt to operate the machine while
it is unattended.
Always remove the key and engage the
parking brake when leaving the machine
unattended.
Using the Motion-Control
Levers
1. Motion-control
lever—P
ARK
g027578
2. Center, unlocked position
3. Forward
19
Figure 18
4. Backward
position
5. Front of machine
g004532
Hide quick links:
Advertisement
Table of Contents
