hit counter script
Download
Share
Print this page
D-Link DNH-100 Manual
  1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Switch
  5. Nuclias DNH-100
  6. Manual
D-Link DNH-100 Manual

D-Link DNH-100 Manual

How to bind the switches nuclias connect
Hide thumbs Also See for DNH-100:
1
2
3
4
5
6
7
8
9

Advertisement

Quick Links

Download this manual
Switches into the Nuclias Connect
For Nuclias Connect Hardware DNH-100 Rev.A and Nuclias Connect Software DNC-100
To bind the switch into the Nuclias Connect please follow these steps.
1. Requirements
- DGS-1210 in Rev.F with firmware version 6.30.xx or higher
- DGS-1210 in Rev.G with firmware version 7.30.xx or higher
- DGS-1100V2 in Rev.A with 10 Ports and more with the
Firmware version 4.00b019 or higher
- DXS-1210 in Rev.B with Firmware version 2.01b10 or higher
- DNH-100 Nuclias Conenct Hub with the actual Firmware 1.2.1.7 or higher.
Or DNC-100 Nuclias Connect Software in the actual Version 1.2.1.3 or higher.
The firmware files and software you can download from our D-A-CH-BE-NE-LUX
web sites
https://www.dlink.com
2. Preparations
Different to the DAP Access Points the switch must be pre-configured so far
that it got an IP-address from the DHCP-Server in the network or has a static
IP-address compatible to the network.
By default the switch has the static IP-address 10.90.90.90
with subnet mask 255.0.0.0
Change the TCP/IP of the network connection temporarily to configure the
switch.
Alternative or if you don't know the IP-address of your switch you can use our
Software D-Link Network Assistant (DNA) to find it out or to change it.
See following screenshot.
Fragen? Unser lokales Support-Team unterstützt Sie gern.
Manual how to bind the
For SWITCH Rev.F and Rev.G
or
https://ftp.dlink.de
www.dlink.com
© 2023 D-Link (Deutschland) GmbH

Advertisement

loading

Related Manuals for D-Link DNH-100

Summary of Contents for D-Link DNH-100

  • Page 1 Firmware version 4.00b019 or higher - DXS-1210 in Rev.B with Firmware version 2.01b10 or higher - DNH-100 Nuclias Conenct Hub with the actual Firmware 1.2.1.7 or higher. Or DNC-100 Nuclias Connect Software in the actual Version 1.2.1.3 or higher. The firmware files and software you can download from our D-A-CH-BE-NE-LUX web sites https://www.dlink.com...
  • Page 2 Note: In the following steps granting that you already made a setup in your DNH-100 / DNC-100 (following named as NC) and have it in use with DAP-models, so the NC has a basic setup already. 3. Call the setup of your NC and log-in.
  • Page 3 5. Create a newSite or chose an already existing Site, in this you added an Access point profile and then add a new Network. For this give (the site and) the Network a name and then click on Next. Fragen? Unser lokales Support-Team unterstützt Sie gern. © 2023 D-Link (Deutschland) GmbH...
  • Page 4 - At Password you must enter the Admin-password this the switch has to get from the NC-Profile as soon as it will be bound-in. Click on Next. 7. Normally it is fine to use Layer 2. Click on Next. Fragen? Unser lokales Support-Team unterstützt Sie gern. © 2023 D-Link (Deutschland) GmbH...
  • Page 5 - The default Admin-password is admin. - If you already have changed the Admin-password then enter this. Click on Import to take over the marked swich into the NC-Profile. Fragen? Unser lokales Support-Team unterstützt Sie gern. © 2023 D-Link (Deutschland) GmbH...
  • Page 6 10. Click on Yes. 11. The displayed NC flickers a few times now. Please what until this ends. Click on Apply & Exit. Fragen? Unser lokales Support-Team unterstützt Sie gern. © 2023 D-Link (Deutschland) GmbH...
  • Page 7 Normally at this moment it is boarding. Status is orange = Boarding After additionally 3-5 minutes the Status is green = Connected The switch can be managed and configured via the NC now. Fragen? Unser lokales Support-Team unterstützt Sie gern. © 2023 D-Link (Deutschland) GmbH...
  • Page 8 There inside the created profile of the switch you can make several settings. With it the binding of the switch into the Nuclias Connect is finished. Example: Each a DGS-1210 Rev.F and G is bound into the Nuclias Connect: Fragen? Unser lokales Support-Team unterstützt Sie gern. © 2023 D-Link (Deutschland) GmbH...
  • Page 9 Basic Setup of the DNH: https://ftp.dlink.de/dnh/dnh-100/documentation/DNH- 100_howto_reva_Grundrichtung_de.pdf The Nuclias Connect app: https://ftp.dlink.de/dnh/dnh-100/documentation/DNH- 100_howto_reva_NucliasConnectApp_de.pdf Tips: https://ftp.dlink.de/dnh/dnh-100/documentation/DNH-100_howto_reva_Tipps_de.pdf For further manuals please visit our FTP server https://ftp.dlink.de/dnh/dnh-100/documentation/ and our websites https://www.dlink.com/de/de https://www.dlink.com/be/fr https://www.dlink.com/be/nl https://www.dlink.com/nl/nl Fragen? Unser lokales Support-Team unterstützt Sie gern. © 2023 D-Link (Deutschland) GmbH...