Table of Contents
Advertisement
Appendix
Troubleshooting
Posalble causes and renee
¢ Make sure POWER is switched on.
¢ Check the power cord connection.
¢ Check that the TV/VIDEO and VTR1-2-3 MDP controls are set
No picture (screen not lit), no sound
Poor or no picture (screen not lit), good sound
Good picture, no sound
No color for color programs
Snow and noise only
correctly.
© Make sure that the TV/CABLE BOX selector is set to TV.
¢ Adjust the picture using the VIDEO screen (pp. 44 - 47).
¢ Check the antenna/cable connections.
¢ Press VOLUME + on the TV or VOL + on the Remote Commander.
¢ Press MUTING on the Remote Commander.
¢ Check the MTS setting (p. 52).
e Check that the TV/VIDEO and VTR1-2-3 MDP controls are set
correctly.
e Make sure SPEAKER is set to ON (p. 53).
¢ Check the HUE and COLOR settings (pp. 44 — 45).
¢ Check that it is an active or correct channel.
© Check the cable setting.
¢ Check the ANT/AUX button setting.
¢ Check antenna/cable connections.
This is often caused by local interference (for example, cars, neon
signs and hairdryers). Adjust the telescopic aerial for minimum
interference.
Dotted lines or stripes
Reflections from nearby mountains or buildings often cause this
problem. Connecting a highly directional outdoor antenna or a
CATV cable may improve the picture.
Double images or ghosts
Try another channel. It could be station trouble.
76 | Some
Advertisement
Table of Contents
