Table of Contents
Advertisement
Configuring the USB ports using the BIOS
You can enable or disable the USB 3.2 Gen 2, USB 3.2 Gen 2 Type-C®, USB 3.2 Gen 1 and USB 2.0
ports from the BIOS Setup.
To disable or enable the USB 3.2 Gen 2, USB 3.2 Gen 2 Type-C®, USB 3.2 Gen 1 and USB 2.0
ports:
1.
Press <Delete> to enter the BIOS Setup at startup.
2.
From the BIOS Setup EZ Mode screen, press <F7> to enter the Advanced Mode. From the
Advanced Mode screen, click Advanced > USB Configuration > USB Single Port Control.
3.
Select the USB port that you want to enable or disable.
4.
Press <Enter> to enable or disable the selected USB port.
Click Exit and select Save Changes & Reset to save the changes made.
5.
Refer to Chapter 1 for the location of the USB ports.
40
Chapter 3: Using your computer
Advertisement
Table of Contents
