Kenwood TM-733A Instruction Manual page 118
144/430/440 mhz fm dual bander
Hide thumbs
Also See for TM-733A:
- Instruction manual (123 pages) ,
- Instruction manual (63 pages) ,
- Instruction manual (123 pages)
Table of Contents
Advertisement
DETACHABLE FRONT PANEL KITS
(DFK-3B, DFK-4B, DFK-7B)
@ Instailation
CAUTION:
Always switch OFF the power and unplug the DC power
cable first.
1 Slide the spring-loaded Release switch on the
bottom of the Front Panel to unlock the Front
Panel from the Main Unit.
Hold the Front Panel to prevent the panel from
falling when it is released.
Front Panel bottom
2 Pull the Front Panel slightly to the left as you lift it
away from the Main Unit.
112
Hang the connector on the connectorized cable
from the Front Panel Kit on the pawl on the front
of the Main Unit. Secure the connector using the
supplied screw.
&— Screw
Connect the other end of the connectorized cable
to the One Touch Panel. The right edge of the
connector should be inserted first into the space
on the One Touch Panel such that the cut-away
corners on the connector mate with the
positioning tabs protruding into the space. Next,
press the left side of the connector into position
and secure the connector using the supplied
bracket and screw.
°
Screw
Bracket
One Touch Panel
Advertisement
Table of Contents
