Kenwood TM-733A Instruction Manual page 85
144/430/440 mhz fm dual bander
Hide thumbs
Also See for TM-733A:
- Instruction manual (123 pages) ,
- Instruction manual (123 pages) ,
- Instruction manual (63 pages)
Table of Contents
Advertisement
m= Auto Dimmer Change
The Display intensity can be made to increase 1
step brighter for 5 seconds (2 steps when No
Display is selected) when you press a button or key,
or turn the Tuning control. No change occurs if d1
is the current Display Dimmer setting. Also,
changing the Display Dimmer selection,
automatically deactivates the Auto Dimmer Change
function.
The function can be manually activated when
dimmer level d1, d2, d3, or d4 is selected, and the
function is automatically activated when No Display
or OFF dimmer levels are selected.
Press [F]+[LOW]+ POWER ON to toggle this
function ON or OFF.
+
"ON" appears briefly on the lower right corner of
the Display when the function is switched ON.
The default is OFF.
DISPLAY DEMONSTRATION MODE
(SHOW-OFF MODE)
Initiating this mode places the transceiver in "Show-Off"
mode.
Various pre-programmed displays appear.
These displays cannot be programmed by you, so you
can enjoy those which have been programmed for you
already.
The transceiver can be used in this mode, if desired.
Pressing buttons or keys, or turning the Tuning control
restores the operating Display immediately. If there is
no button/key entry or Tuning control adjustment for
more than about 10 seconds, the transceiver reverts
back to Show-Off mode.
Press [CALL]+ POWER ON to toggle the mode ON or
OFF.
+
"ON" appears briefly on the lower right corner of the
Display when the mode is switched ON. The default
is OFF.
=] 2
AYE <<
|]
a
@kO)
i
79
Advertisement
Table of Contents
