Table of Contents
Advertisement
6.2.
Power LED Blinking timing chart
1. Subject
Information of LED Flashing timing chart.
2. Contents
When an abnormality occurs, the protection circuit will operate and reset the unit to stand by mode. During this time, the
defective block can be identified by the number of blinking times of the Power LED on the front panel of the unit as follow:
No
1
2
3
6.3.
No Power
First check point
There are following 2 states of No Power indication by power LED.
1. No lit
2. Red is lit then turns red blinking a few seconds later. (See 6.2.)
Name
BL_SOS
SOS from PANEL inverter
TV_SOS
TCON power down
SOUND_SOS
SOS from audio AMP
Factor
R_LED Blink
1
3
9
13
TH-L39EM5D
PCB Name
A-Board
P-Board
LCD Panel
A-Board
TCON-Board
A-Board
Advertisement
Table of Contents
