Page 1
LR96CAQ20, LR96CAQ50, LR96CAQ50B Ceiling-mounted ventilation system EN User manual and installation instructions Register your appliance on My Siemens and discover exclusive services and offers. Siemens Home Appliances...
en Safety Table of contents Only use this appliance: ¡ For extracting cooking vapour. ¡ in private households and in enclosed INFORMATION FOR USE spaces in a domestic environment. Safety .............. 2 ¡ up to an altitude of max. 2000 m above sea level. Preventing material damage ...... 5 Do not use the appliance: Environmental protection and saving en-...
Page 3
Safety en WARNING ‒ Risk of poisoning! WARNING ‒ Risk of fire! Risk of poisoning from flue gases being Fatty deposits in the grease filters may catch drawn back in. Room-air-dependent heat-pro- fire. ducing appliances (e.g. gas, oil, wood or coal- ▶ Never operate the appliance without a operated heaters, continuous flow heaters or grease filter.
en Safety Risk of falling when working on the appliance WARNING ‒ Risk of injury! Components inside the appliance may have sharp edges. ▶ Carefully clean the appliance interior. Items placed on the appliance may fall off. ▶ Do not place any objects on the appliance. Changes to the electrical or mechanical as- sembly are dangerous and may lead to mal- ▶...
Preventing material damage en WARNING ‒ Risk of fire! WARNING ‒ Risk of electric shock! Fatty deposits in the grease filters may catch Penetrating moisture may cause an electric fire. shock. ▶ Clean the grease filters regularly. ▶ Do not use wet sponge cloths. WARNING ‒ Risk of injury! Improper repairs are dangerous.
Page 6
en Operating modes The saturation indicator must be adjusted to the selec- ted operating mode and the filters used. → "Setting the saturation indicator", Page 8 4.1 Air extraction mode The air which is drawn in is cleaned by the grease fil- ters and conveyed to the exterior by a pipe system. The air must not be discharged into a flue that is used for exhausting fumes from appliances burning gas or other...
Familiarising yourself with your appliance en Familiarising yourself with your appliance 5 Familiarising yourself with your appliance 5.1 Controls Switch the fan run-on on or off Home Connect Establishing a connection You can use the controls to configure all functions of your appliance and to obtain information about the op- Reset the filter saturation indicator erating status.
Page 8
en Basic operation so oft drücken, bis in der LED-Anzeige die LED 4 7.11 Sensor sensitivity für die Intensivstufe 1 leuchtet. In automatic mode, a sensor in the appliance detects so oft drücken, bis in der LED-Anzeige die LED 5 the intensity of the cooking odours and roasting für die Intensivstufe 2 leuchtet.
Page 9
Home Connect en Press and hold and for approx. three seconds. 7.15 Resetting the saturation indicator a In the LED display, the LED for the setting that is After cleaning the grease filter or after changing the currently selected lights up. odour filter, the saturation indicator can be reset.
en Hob-based hood control Follow the instructions in the Home Connect app. ¡ We recommend that you install security updates as soon as possible. 8.2 Resetting the connection 8.4 Remote diagnostics Saved connections to the home network and to Home Connect can be reset. Customer Service can use Remote Diagnostics to ac- cess your appliance if you contact them, have your ap- Press and hold ...
Cleaning and servicing en Clean glass using a soft cloth and glass cleaner. ‒ WARNING ‒ Risk of burns! Dry with a soft cloth. The appliance becomes hot during operation. Apply a thin layer of the stainless steel cleaning Allow the appliance to cool down before cleaning. ▶...
Page 12
en Cleaning and servicing Open the filter cover by pulling it downwards. WARNING ‒ Risk of fire! Fatty deposits in the grease filters may catch fire. Clean the grease filters regularly. ▶ ATTENTION! The grease filters may become damaged if they are squeezed in the dishwasher. Do not squeeze the grease filters.
Troubleshooting en Remove the cover. Close the cover. Remove the empty batteries. Dispose of the empty batteries in an environmentally Insert the new batteries (3 V CR 2032). friendly manner. Troubleshooting 11 Troubleshooting You can rectify minor faults on your appliance yourself. WARNING ‒ Risk of electric shock! Read the troubleshooting information before contacting Incorrect repairs are dangerous.
en Disposal Fault Cause and troubleshooting LED 1 flashes in the The grease filters are saturated. LED display. → "Cleaning grease filters in the dishwasher", Page 12 ▶ → "Cleaning grease filters manually", Page 12 ▶ LED 2 flashes in the The odour filters are saturated. LED display. Change the odour filter.
A detailed Declaration of Conformity can be found on- A detailed RED Declaration of Conformity can be found line at siemens-home.bsh-group.com/uk/ among the online at siemens-home.bsh-group.com among the ad- additional documents on the product page for your ditional documents on the product page for your appli- appliance.
en Installation instructions 16.1 Included with the appliance 16.3 Safety clearances After unpacking all parts, check for any damage in Comply with the safety clearances for the appliance. transit and completeness of the delivery. 16.4 Secure installation 16.2 Dimensions Follow these safety instructions when in- stalling the appliance.
Page 17
Installation instructions en Risk of poisoning from flue gases being WARNING ‒ Risk of poisoning! drawn back in. Risk of poisoning from flue gases being ▶ If an extractor hood with an open-flued heat drawn back in. Room-air-dependent heat-pro- production source is installed, the power ducing appliances (e.g.
Page 18
en Installation instructions ▶ If the appliance or the power cord is dam- The appliance may fall down if it has not been aged, immediately unplug the power cord properly fastened in place. or switch off the fuse in the fuse box. ▶...
Page 19
Installation instructions en ¡ Diameter of 150 mm corresponds to ap- WARNING ‒ Risk of electric shock! prox. 177 cm². It must always be possible to disconnect the appliance ¡ Diameter of 120 mm corresponds to ap- from the electricity supply. The appliance must only be prox. 113 cm². connected to a protective contact socket that has been ¡...
Page 20
en Installation instructions Screw the flat duct connection onto the fan group. Connecting the appliance Undo the screws on the top frame assembly using a screwdriver and remove the top frame assembly. Installing the appliance WARNING ‒ Risk of injury! Components inside the appliance may have sharp edges.
Page 21
Installation instructions en Loosen the screws on the side covers and remove Turning the air outlet to the back the covers. Starting with the delivery condition, turn the fan box clockwise so that the air outlet is pointing to the back. Insert the extension cable.
Page 22
en Installation instructions Finishing connecting the appliance Fitting the filter cover Guide the cable through the opening in the side WARNING ‒ Risk of injury! cover. Components inside the appliance may have sharp Insert the side covers and screw them firmly in edges. place.
Page 23
Installation instructions en Components inside the appliance may have sharp Press together the cable duct at the sides and re- edges. move it. Wear protective gloves. ▶ Risk of injury when opening and closing the hinges. Keep your hands away from the hinges. ▶...
Page 24
en Installation instructions Push the fan box to the other side and pull out the mains plug. Rotate the fan box in such a way that the air outlet faces forwards. Remove the fan box. Loosen the mounting brackets on the appliance us- ing a screwdriver.
Page 28
EN Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd. Grand Union House Old Wolverton Road Wolverton, Milton Keynes MK12 5PT United Kingdom BSH Hausgeräte GmbH Carl-Wery-Straße 34...